Marina Serdyuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Marina Serdyuk has a total of 203 co-authors. Here are the top co-authors by number of shared publications:
- Valentyna Bandura
National University of Life and Environmental Sciences of Ukraine
15 shared publications - Iryna Ivanova
Dmytro Motornyi Tavria State Agrotechnological University
9 shared publications - Tetiana Tymoshchuk
Polissia National University
7 shared publications Тетяна Колісниченко
7 shared publications- Larysa Bal-Prylypko
National University of Life and Environmental Sciences of Ukraine
6 shared publications - Olesia Priss
Dmytro Motornyi Tavria State Agrotechnological University
6 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 70-80
Revealing the effect of oat β-glucan and psyllium ratio on the technological, structural-mechanical, and organoleptic properties of minced meat
This study investigates minced meat from beef and chicken in a ratio of 60:40, composed of a mixture of oat β-glucan and psyllium. The task addressed relates to the lack of a reasonable ratio of these hydrocolloids, which would improve the technological and structural-mechanical properties of minced meat, reduce mass losses during heat treatment, and maintain high organoleptic indicators. The total content of active components in the test samples was 1.0%. During the study, the moisture-binding capacity, plasticity, ultimate shear stress, mass losses after heat treatment, and organoleptic indicators were determined. Mathematical and statistical processing of the experimental data was carried out using regression analysis. The optimal ratio of active components of hydrocolloids was determined by the generalized Harrington desirability function. The most rational ratio of active ingredients of oat β-glucan and psyllium was 24.8 and 75.2, which is almost 1:3. In the experimental samples, the water-binding capacity increased to 86.23%, and the maximum increase relative to the control was 16.2%. The plasticity of the minced meat was 16.67 cm2/g, the ultimate shear stress (ESS) was 2166.45 Pa, the mass loss after heat treatment was 8.93%, and the overall organoleptic score was 4.73 points. The maximum value of the generalized desirability function is 0.995. The determined ratio corresponds to 0.36 kg of β-glucan concentrate and 0.84 kg of psyllium powder per 100 kg of minced meat. The proposed ratio of β-glucan and psyllium components could be used for designing meat and meat-vegetable semi-finished products with stable technological properties and reduced losses during heat treatment
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 70-80
Open AccessRevealing the effect of oat β-glucan and psyllium ratio on the technological, structural-mechanical, and organoleptic properties of minced meat
This study investigates minced meat from beef and chicken in a ratio of 60:40, composed of a mixture of oat β-glucan and psyllium. The task addressed relates to the lack of a reasonable ratio of these hydrocolloids, which would improve the technological and structural-mechanical properties of minced meat, reduce mass losses during heat treatment, and maintain high organoleptic indicators. The total content of active components in the test samples was 1.0%. During the study, the moisture-binding capacity, plasticity, ultimate shear stress, mass losses after heat treatment, and organoleptic indicators were determined. Mathematical and statistical processing of the experimental data was carried out using regression analysis. The optimal ratio of active components of hydrocolloids was determined by the generalized Harrington desirability function. The most rational ratio of active ingredients of oat β-glucan and psyllium was 24.8 and 75.2, which is almost 1:3. In the experimental samples, the water-binding capacity increased to 86.23%, and the maximum increase relative to the control was 16.2%. The plasticity of the minced meat was 16.67 cm2/g, the ultimate shear stress (ESS) was 2166.45 Pa, the mass loss after heat treatment was 8.93%, and the overall organoleptic score was 4.73 points. The maximum value of the generalized desirability function is 0.995. The determined ratio corresponds to 0.36 kg of β-glucan concentrate and 0.84 kg of psyllium powder per 100 kg of minced meat. The proposed ratio of β-glucan and psyllium components could be used for designing meat and meat-vegetable semi-finished products with stable technological properties and reduced losses during heat treatment
- Open Access
- 15 October 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 369 (5) , 60-66
ДОСЛІДЖЕННЯ ВПЛИВУ ПРОРОЩУВАННЯ НА ЗМІНИ ХАРЧОВИХ І ФУНКЦІОНАЛЬНО-ТЕХНОЛОГІНИХ ВЛАСТИВОСТЕЙ НУТУ
The paper presents the results of a study on the effect of germination on the nutritional value, antinutritional profile, functional-technological, and structural-mechanical properties of chickpea. The study object was chickpea (Cicer arietinum L.) before germination and after germination and technological preparation. The comparative assessment included protein content, dietary fiber content, total phenolic content, phytic acid content, trypsin inhibitor activity, water-holding capacity, swelling capacity, and hardness after hydrothermal treatment. The experimental results demonstrated that germination induced a complex and targeted modification of chickpea properties. Protein content increased by 10.4%, dietary fiber content by 10.8%, and total phenolic content by 67.6%. At the same time, phytic acid content decreased by 54.3% and trypsin inhibitor activity by 68.9%, indicating an improvement in the antinutritional profile of the raw material. Water-holding capacity increased by 35.9% and swelling capacity by 43.0%, while chickpea hardness after hydrothermal treatment decreased by 57.4%. To provide an integrated assessment of these multidirectional changes, partial and overall integral quality indices were calculated. The nutritional value index was 1.271, corresponding to an improvement of 27.1%; the antinutritional profile index was 2.652, corresponding to 165.2%; and the functional-technological properties index was 1.659, corresponding to 65.9%. The overall integral quality index was 1.688, which corresponds to a comprehensive improvement of 68.8% in the studied properties of chickpea after germination. The obtained results confirm the effectiveness of germination as a method for the targeted modification of the nutritional and functional-technological characteristics of chickpea and substantiate the prospects for its use as a plant-based ingredient in multicomponent food systems. Further research should focus on a more detailed investigation of the relationships between biochemical, hydration, and structural-mechanical changes in chickpea during germination, as well as on evaluating the effectiveness of its application in various food systems.
- 15 October 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 369 (5) , 60-66
Open AccessДОСЛІДЖЕННЯ ВПЛИВУ ПРОРОЩУВАННЯ НА ЗМІНИ ХАРЧОВИХ І ФУНКЦІОНАЛЬНО-ТЕХНОЛОГІНИХ ВЛАСТИВОСТЕЙ НУТУ
The paper presents the results of a study on the effect of germination on the nutritional value, antinutritional profile, functional-technological, and structural-mechanical properties of chickpea. The study object was chickpea (Cicer arietinum L.) before germination and after germination and technological preparation. The comparative assessment included protein content, dietary fiber content, total phenolic content, phytic acid content, trypsin inhibitor activity, water-holding capacity, swelling capacity, and hardness after hydrothermal treatment. The experimental results demonstrated that germination induced a complex and targeted modification of chickpea properties. Protein content increased by 10.4%, dietary fiber content by 10.8%, and total phenolic content by 67.6%. At the same time, phytic acid content decreased by 54.3% and trypsin inhibitor activity by 68.9%, indicating an improvement in the antinutritional profile of the raw material. Water-holding capacity increased by 35.9% and swelling capacity by 43.0%, while chickpea hardness after hydrothermal treatment decreased by 57.4%. To provide an integrated assessment of these multidirectional changes, partial and overall integral quality indices were calculated. The nutritional value index was 1.271, corresponding to an improvement of 27.1%; the antinutritional profile index was 2.652, corresponding to 165.2%; and the functional-technological properties index was 1.659, corresponding to 65.9%. The overall integral quality index was 1.688, which corresponds to a comprehensive improvement of 68.8% in the studied properties of chickpea after germination. The obtained results confirm the effectiveness of germination as a method for the targeted modification of the nutritional and functional-technological characteristics of chickpea and substantiate the prospects for its use as a plant-based ingredient in multicomponent food systems. Further research should focus on a more detailed investigation of the relationships between biochemical, hydration, and structural-mechanical changes in chickpea during germination, as well as on evaluating the effectiveness of its application in various food systems.
- Open Access
- 31 July 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 367 (4) , 105-110
ВИЗНАЧЕННЯ ЗАКОНОМІРНОСТЕЙ ЗМІН АКТИВНОСТІ ВОДИ ТА ВОЛОГОЗВ’ЯЗУВАЛЬНОЇ ЗДАТНОСТІ РОСЛИННИХ СУБСТРАТІВ У ПРОЦЕСІ МОЛОЧНОКИСЛОЇ ФЕРМЕНТАЦІЇ
The study investigates the patterns of changes in water activity and water-binding capacity of plant substrates during lactic acid fermentation to substantiate their technological use as functional ingredients in food products. The relevance of the study is due to the need for a deeper understanding of the transformation of the state of water in plant raw materials under the influence of biotechnological processes that determine their structural, mechanical, and moisture-retaining properties.The objects of the study were plant substrates of different biochemical nature: spelt, flaxseed, Laminaria, and oyster mushroom fruiting bodies. Fermentation was carried out using a Lactiplantibacillus plantarum culture under controlled conditions for 24 hours with periodic sampling. Water activity was determined by a hygrometric method, while water-binding capacity was assessed using a pressing method.It was established that during lactic acid fermentation, a gradual decrease in water activity occurs in all studied substrates, indicating a redistribution of the water phase and a reduction in the proportion of free water. The most pronounced decrease was observed in the flaxseed substrate, which can be explained by the high hydrophilicity of its mucilage polysaccharides. At the same time, changes in spelt and oyster mushroom substrates were less intensive.It was proven that the water-binding capacity of all substrates increases during fermentation; however, the intensity of this process significantly depends on their chemical composition. The highest increase was observed for flaxseed (up to 120%), a substantial increase for Laminaria (75.4%), while changes in spelt and oyster mushroom were moderate. The obtained dependencies are nonlinear and are well described by polynomial models (R² > 0.99).
- 31 July 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 367 (4) , 105-110
Open AccessВИЗНАЧЕННЯ ЗАКОНОМІРНОСТЕЙ ЗМІН АКТИВНОСТІ ВОДИ ТА ВОЛОГОЗВ’ЯЗУВАЛЬНОЇ ЗДАТНОСТІ РОСЛИННИХ СУБСТРАТІВ У ПРОЦЕСІ МОЛОЧНОКИСЛОЇ ФЕРМЕНТАЦІЇ
The study investigates the patterns of changes in water activity and water-binding capacity of plant substrates during lactic acid fermentation to substantiate their technological use as functional ingredients in food products. The relevance of the study is due to the need for a deeper understanding of the transformation of the state of water in plant raw materials under the influence of biotechnological processes that determine their structural, mechanical, and moisture-retaining properties.The objects of the study were plant substrates of different biochemical nature: spelt, flaxseed, Laminaria, and oyster mushroom fruiting bodies. Fermentation was carried out using a Lactiplantibacillus plantarum culture under controlled conditions for 24 hours with periodic sampling. Water activity was determined by a hygrometric method, while water-binding capacity was assessed using a pressing method.It was established that during lactic acid fermentation, a gradual decrease in water activity occurs in all studied substrates, indicating a redistribution of the water phase and a reduction in the proportion of free water. The most pronounced decrease was observed in the flaxseed substrate, which can be explained by the high hydrophilicity of its mucilage polysaccharides. At the same time, changes in spelt and oyster mushroom substrates were less intensive.It was proven that the water-binding capacity of all substrates increases during fermentation; however, the intensity of this process significantly depends on their chemical composition. The highest increase was observed for flaxseed (up to 120%), a substantial increase for Laminaria (75.4%), while changes in spelt and oyster mushroom were moderate. The obtained dependencies are nonlinear and are well described by polynomial models (R² > 0.99).
- Open Access
- 30 June 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (141)) , 30-40
Assessing the influence of lactic acid fermentation on the biochemical indicators of plant substrates and substantiating the rational process duration
This study investigates the lactic acid fermentation process involving plant substrates of various natures (spelt, flax seeds, kelp, oyster mushrooms) with the participation of Lactiplantibacillus plantarum. The task addressed relates to the insufficient certainty of the patterns in biochemical transformations in plant substrates of various natures in the lactic acid fermentation process. This complicates their targeted selection and use as fermented ingredients in food products. Fermentation was carried out at a temperature of 32 ± 2°C for 24 hours with sampling every 6 hours. It was established that the pH dynamics have a phase character: the most intensive decrease occurs in the interval of 0–6 hours. The total pH decrease was 33.0% for spelt, 28.5% for oyster mushrooms, 20.2% for flax, and 12.2% for kelp. The average rate of pH decrease over 24 hours was from –0.088 units/h (spelt) to –0.034 units/h (kelp). An increase in titrated acidity was found in all substrates, the most intense for spelt and oyster mushrooms: 9.35 and 9.5 times, respectively, with average rates of 0.042 and 0.040 g/100 g/h. For flax and kelp, the increase was lower – 0.48 and 0.28 g/100 g, respectively. A strong inverse correlation was found between pH and titrated acidity (r = –0.98 ± 0.03). The decrease in soluble carbohydrates was 46.2% in oyster mushrooms and 42.3% in spelt, while in kelp and flax – 6.7% and 13.8%. The content of soluble protein increased by 58% in kelp, 50% in flax, 43% in spelt and 33% in oyster mushrooms in the absence of significant changes in total protein. It was found that after 18 hours of fermentation, the rate of change of all indicators is significantly reduced. It was substantiated that the rational duration of fermentation is 18 hours, which enables a balanced acid profile and effective transformation of the carbohydrate-protein complex without excessive acidification
- 30 June 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (141)) , 30-40
Open AccessAssessing the influence of lactic acid fermentation on the biochemical indicators of plant substrates and substantiating the rational process duration
This study investigates the lactic acid fermentation process involving plant substrates of various natures (spelt, flax seeds, kelp, oyster mushrooms) with the participation of Lactiplantibacillus plantarum. The task addressed relates to the insufficient certainty of the patterns in biochemical transformations in plant substrates of various natures in the lactic acid fermentation process. This complicates their targeted selection and use as fermented ingredients in food products. Fermentation was carried out at a temperature of 32 ± 2°C for 24 hours with sampling every 6 hours. It was established that the pH dynamics have a phase character: the most intensive decrease occurs in the interval of 0–6 hours. The total pH decrease was 33.0% for spelt, 28.5% for oyster mushrooms, 20.2% for flax, and 12.2% for kelp. The average rate of pH decrease over 24 hours was from –0.088 units/h (spelt) to –0.034 units/h (kelp). An increase in titrated acidity was found in all substrates, the most intense for spelt and oyster mushrooms: 9.35 and 9.5 times, respectively, with average rates of 0.042 and 0.040 g/100 g/h. For flax and kelp, the increase was lower – 0.48 and 0.28 g/100 g, respectively. A strong inverse correlation was found between pH and titrated acidity (r = –0.98 ± 0.03). The decrease in soluble carbohydrates was 46.2% in oyster mushrooms and 42.3% in spelt, while in kelp and flax – 6.7% and 13.8%. The content of soluble protein increased by 58% in kelp, 50% in flax, 43% in spelt and 33% in oyster mushrooms in the absence of significant changes in total protein. It was found that after 18 hours of fermentation, the rate of change of all indicators is significantly reduced. It was substantiated that the rational duration of fermentation is 18 hours, which enables a balanced acid profile and effective transformation of the carbohydrate-protein complex without excessive acidification
- Open Access
- 26 June 2026
- Published by OU Scientific Route
Advances in food technology and innovation
Innovative technologies of dairy-plant-based products for functional purposes. The development of innovative dairy-plant-based products for functional purposes is a promising direction in modern food technology. Recipe optimization involved the incorporation of soy-fat concentrate, chia, quinoa, and flax seeds as sources of polyunsaturated fatty acids, dietary fiber, and antioxidants, as well as dihydroquercetin to enhance antioxidant stability and extend shelf life. The proposed approach ensured the formation of a balanced protein-lipid composition, improvement of the fatty acid profile, and enrichment with biologically active compounds, resulting in increased antioxidant potential. Monitoring of acarid mite populations in craft hard goat cheeses during ripening. The use of mites in the ripening of artisanal hard goat cheeses contributes to distinctive sensory characteristics but requires safety assessment. A methodology for monitoring Acarus siro density was developed. For unwashed cheeses, mites are determined in surface powder per unit mass, whereas for washed cheeses, they are counted in rind scrapings per unit area. Treatment with linseed oil eliminated Acarus siro mites and eggs but promoted secondary mold growth. The effect of protective composition on the quality of sweet cherry during storage. The effect of an exogenous protective composition based on lactic and acetic acids on the preservation of sweet cherry fruits during refrigerated storage was studied. Sweet cherry fruits of nine varieties were pre-cooled using air cooling, hydrocooling, and a combined method involving hydrocooling in organic acid solutions followed by air cooling, and stored. The highest yield of marketable fruits was obtained using combined cooling with the protective composition. This treatment reduced oxidative stress, as evidenced by lower malondialdehyde content and balanced antioxidant enzyme activity. Evaluation of the usage of spontaneous fermentation sourdough starters and their influence on the quality indicators of wheat bread. The feasibility of using spontaneous fermentation sourdoughs (dry and liquid starters based on wine yeast) in wheat bread production was evaluated. Physical, chemical, biotechnological, and sensory properties of the starters were determined, and test baking was conducted. Bread with 5% and 7% sourdough was compared with control samples. The addition of sourdough increased specific volume and porosity, slowed moisture loss, and improved sensory characteristics. Technological and qualitative aspects of enriching wheat bread with oyster mushroom paste. The feasibility of using oyster mushroom (Pleurotus ostreatus) paste as a functional ingredient in wheat bread was investigated. By-products of mushroom processing were proposed to reduce costs and improve economic efficiency. Bread with 10–30% mushroom paste was evaluated for physicochemical properties. The addition of mushroom paste caused moderate changes in bread characteristics and amino acid composition without exceeding quality standards, confirming its potential for functional bakery products. Improvement of technology of fish pastes with the addition of non-traditional raw materials. The study investigated the use of goji berries as a functional additive in crucian carp fish sticks. The addition of berries increased mineral content, reduced moisture, and improved sensory and textural properties. During storage at 4°C for 4 days, the samples retained physicochemical stability and high sensory quality. The results confirm the feasibility of using goji berries to improve the nutritional and functional value of fish products. Innovative approaches to the storage technology of dehydrated meat semi-finished products using natural antioxidants. The effect of convective drying and treatment with a natural antioxidant (trans-ferulic acid) on the stability of the structure and preservation of nutritional value of semi-finished meat products from chicken and pork was studied. The optimal parameters of the technology for extending shelf life were determined. Development of sauce technology from fermented plant-based materials for the food industry and HoReCa. The study focused on developing a technology for sauces based on fermented plant materials (legumes, grains, pseudo-grains, and vegetables) using Lactiplantibacillus plantarum. Fermentation led to a decrease in pH, carbohydrates, and sugars, along with a shift in redox potential, indicating improved functional properties of the raw materials. The resulting sauces exhibited lower energy value, stable consistency, and distinctive flavor profiles compared to the control (boiled chickpea-based sauce). Impact of long-term storage on the quality of frozen pickled sweet peppers. This study investigated frozen pickled sweet peppers prepared with a marinade of oil, sugar, honey, salt, citric acid, and spices, followed by storage at –20°C for 270 days. Moderate losses of ascorbic acid, carotenoids, dry matter, and sugars were observed, while some bioactive compounds increased. Freezing improved microbiological safety and maintained high sensory quality. Microwave thawing was recommended, although prolonged storage after thawing reduces quality despite remaining within safety limits. Effect of a combined biopolymer coating on the quality of asparagus spears during storage. The effect of a biopolymer coating based on sodium alginate and the antioxidant rutin on the quality of asparagus during storage was studied. The effect of the coating on the preservation of the marketable, physiological and organoleptic characteristics of asparagus was considered. The use of the studied biopolymer allowed to slow down respiratory metabolism, degradation of chlorophylls and carotenoids and stabilize the organoleptic characteristics of the product. Fatty acid composition of total lipids of liver and thigh muscle broiler chickens under the influence of separate and complex...
- 26 June 2026
- Published by OU Scientific Route
Open AccessAdvances in food technology and innovation
Innovative technologies of dairy-plant-based products for functional purposes. The development of innovative dairy-plant-based products for functional purposes is a promising direction in modern food technology. Recipe optimization involved the incorporation of soy-fat concentrate, chia, quinoa, and flax seeds as sources of polyunsaturated fatty acids, dietary fiber, and antioxidants, as well as dihydroquercetin to enhance antioxidant stability and extend shelf life. The proposed approach ensured the formation of a balanced protein-lipid composition, improvement of the fatty acid profile, and enrichment with biologically active compounds, resulting in increased antioxidant potential. Monitoring of acarid mite populations in craft hard goat cheeses during ripening. The use of mites in the ripening of artisanal hard goat cheeses contributes to distinctive sensory characteristics but requires safety assessment. A methodology for monitoring Acarus siro density was developed. For unwashed cheeses, mites are determined in surface powder per unit mass, whereas for washed cheeses, they are counted in rind scrapings per unit area. Treatment with linseed oil eliminated Acarus siro mites and eggs but promoted secondary mold growth. The effect of protective composition on the quality of sweet cherry during storage. The effect of an exogenous protective composition based on lactic and acetic acids on the preservation of sweet cherry fruits during refrigerated storage was studied. Sweet cherry fruits of nine varieties were pre-cooled using air cooling, hydrocooling, and a combined method involving hydrocooling in organic acid solutions followed by air cooling, and stored. The highest yield of marketable fruits was obtained using combined cooling with the protective composition. This treatment reduced oxidative stress, as evidenced by lower malondialdehyde content and balanced antioxidant enzyme activity. Evaluation of the usage of spontaneous fermentation sourdough starters and their influence on the quality indicators of wheat bread. The feasibility of using spontaneous fermentation sourdoughs (dry and liquid starters based on wine yeast) in wheat bread production was evaluated. Physical, chemical, biotechnological, and sensory properties of the starters were determined, and test baking was conducted. Bread with 5% and 7% sourdough was compared with control samples. The addition of sourdough increased specific volume and porosity, slowed moisture loss, and improved sensory characteristics. Technological and qualitative aspects of enriching wheat bread with oyster mushroom paste. The feasibility of using oyster mushroom (Pleurotus ostreatus) paste as a functional ingredient in wheat bread was investigated. By-products of mushroom processing were proposed to reduce costs and improve economic efficiency. Bread with 10–30% mushroom paste was evaluated for physicochemical properties. The addition of mushroom paste caused moderate changes in bread characteristics and amino acid composition without exceeding quality standards, confirming its potential for functional bakery products. Improvement of technology of fish pastes with the addition of non-traditional raw materials. The study investigated the use of goji berries as a functional additive in crucian carp fish sticks. The addition of berries increased mineral content, reduced moisture, and improved sensory and textural properties. During storage at 4°C for 4 days, the samples retained physicochemical stability and high sensory quality. The results confirm the feasibility of using goji berries to improve the nutritional and functional value of fish products. Innovative approaches to the storage technology of dehydrated meat semi-finished products using natural antioxidants. The effect of convective drying and treatment with a natural antioxidant (trans-ferulic acid) on the stability of the structure and preservation of nutritional value of semi-finished meat products from chicken and pork was studied. The optimal parameters of the technology for extending shelf life were determined. Development of sauce technology from fermented plant-based materials for the food industry and HoReCa. The study focused on developing a technology for sauces based on fermented plant materials (legumes, grains, pseudo-grains, and vegetables) using Lactiplantibacillus plantarum. Fermentation led to a decrease in pH, carbohydrates, and sugars, along with a shift in redox potential, indicating improved functional properties of the raw materials. The resulting sauces exhibited lower energy value, stable consistency, and distinctive flavor profiles compared to the control (boiled chickpea-based sauce). Impact of long-term storage on the quality of frozen pickled sweet peppers. This study investigated frozen pickled sweet peppers prepared with a marinade of oil, sugar, honey, salt, citric acid, and spices, followed by storage at –20°C for 270 days. Moderate losses of ascorbic acid, carotenoids, dry matter, and sugars were observed, while some bioactive compounds increased. Freezing improved microbiological safety and maintained high sensory quality. Microwave thawing was recommended, although prolonged storage after thawing reduces quality despite remaining within safety limits. Effect of a combined biopolymer coating on the quality of asparagus spears during storage. The effect of a biopolymer coating based on sodium alginate and the antioxidant rutin on the quality of asparagus during storage was studied. The effect of the coating on the preservation of the marketable, physiological and organoleptic characteristics of asparagus was considered. The use of the studied biopolymer allowed to slow down respiratory metabolism, degradation of chlorophylls and carotenoids and stabilize the organoleptic characteristics of the product. Fatty acid composition of total lipids of liver and thigh muscle broiler chickens under the influence of separate and complex...
- Open Access
- 18 June 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(89)) , 60-68
Modeling the influence of screw shaft geometric parameters on the compression ratio of raw material and oil yield in a single-screw press
The object of research is the process of mechanical oil extraction from sunflower seeds in a single-screw press and the influence of the geometric parameters of the screw shaft on its performance efficiency. The paper addresses the problem of improving pressing efficiency by identifying reserves for process intensification through optimization of the screw shaft design. The influence of the flight pitch, segment length, and inner diameter on the formation of the compression ratio of the raw material and the pressure distribution along the working zone of the press is analyzed. Experimental researches were carried out using a screw press with a capacity of up to 200 kg/h, allowing variation of the geometric parameters of the screw segments. Configurations of the screw shaft with a flight pitch in the range of 40–140 mm, segment length of 40–200 mm, and inner diameter of 82–132 mm were investigated. It was established that these parameters determine the compression ratio of the material within the range of 13.6–14.6 and affect the pressure distribution and the pattern of oil flow along the pressing chamber. It is shown that reducing the flight pitch to 40–56 mm and increasing the inner diameter to 128–132 mm leads to a shift of the maximum pressure zone toward the outlet section of the press. It was experimentally confirmed that the rational compression ratio is 13.6, at which the maximum oil yield reaches 37% under single-stage cold pressing conditions. It was found that a further increase in the compression ratio to 14.6 does not lead to an increase in oil yield but results in higher crushed oil cake formation and a decrease in overall process efficiency. It was determined that optimization of the geometry of the first screw flights, in particular the rational combination of the parameters of the first segment (Ø82/140 mm, L = 192 mm, S = 120 mm) and the second segment (Ø82/140 mm, L = 90 mm, S = 80 mm) makes it possible to increase the press productivity without increasing raw material losses. The obtained results can be used to improve the design of screw presses for small-scale production and to enhance their technical and economic performance.
- 18 June 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(89)) , 60-68
Open AccessModeling the influence of screw shaft geometric parameters on the compression ratio of raw material and oil yield in a single-screw press
The object of research is the process of mechanical oil extraction from sunflower seeds in a single-screw press and the influence of the geometric parameters of the screw shaft on its performance efficiency. The paper addresses the problem of improving pressing efficiency by identifying reserves for process intensification through optimization of the screw shaft design. The influence of the flight pitch, segment length, and inner diameter on the formation of the compression ratio of the raw material and the pressure distribution along the working zone of the press is analyzed. Experimental researches were carried out using a screw press with a capacity of up to 200 kg/h, allowing variation of the geometric parameters of the screw segments. Configurations of the screw shaft with a flight pitch in the range of 40–140 mm, segment length of 40–200 mm, and inner diameter of 82–132 mm were investigated. It was established that these parameters determine the compression ratio of the material within the range of 13.6–14.6 and affect the pressure distribution and the pattern of oil flow along the pressing chamber. It is shown that reducing the flight pitch to 40–56 mm and increasing the inner diameter to 128–132 mm leads to a shift of the maximum pressure zone toward the outlet section of the press. It was experimentally confirmed that the rational compression ratio is 13.6, at which the maximum oil yield reaches 37% under single-stage cold pressing conditions. It was found that a further increase in the compression ratio to 14.6 does not lead to an increase in oil yield but results in higher crushed oil cake formation and a decrease in overall process efficiency. It was determined that optimization of the geometry of the first screw flights, in particular the rational combination of the parameters of the first segment (Ø82/140 mm, L = 192 mm, S = 120 mm) and the second segment (Ø82/140 mm, L = 90 mm, S = 80 mm) makes it possible to increase the press productivity without increasing raw material losses. The obtained results can be used to improve the design of screw presses for small-scale production and to enhance their technical and economic performance.
- 22 May 2026
- Published by Publishing House Helvetica (Publications)
- Vol. 1 (148) , 286-290
Loss of weight of cherries and sour cherries due to the effects of pre-cooling
- 22 May 2026
- Published by Publishing House Helvetica (Publications)
- Vol. 1 (148) , 286-290
Loss of weight of cherries and sour cherries due to the effects of pre-cooling
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (6 (140)) , 17-26
Adsorption purification of sunflower oil using acid-activated montmorilonite and quality assessment
This study investigates the process of sunflower oil adsorption purification using acid-activated montmorillonite from the Cherkasy deposit. The paper considers the change in sunflower oil quality indicators resulting from adsorption treatment with natural dispersed minerals. This work reports a comprehensive solution to the problem of substantiating and devising efficient technology for vegetable oil purification that simultaneously removes impurities, oxidation products, as well as heavy metal cations. Process efficiency was evaluated using physicochemical methods, including determination of acid, color, peroxide values, mass fraction of phosphorus-containing substances, moisture, volatile matter, as well as chromatographic-mass spectrometric analysis of oil composition. The results of experimental and pilot-scale studies demonstrate that the use of acid-activated montmorillonite at a dosage of 1% by oil mass, a temperature of 90–110°C, and a contact time of 20–30 min, ensures a reduction in the peroxide value to 3.0–3.9 mmol O2/kg, the color value to 6–9 mg I2, and the mass fraction of phosphorus-containing substances to 0.01–0.05%. It has been shown that adsorption purification does not affect the basic triacylglycerol composition of the oil but promotes the removal of oxidized compounds that deteriorate its consumer properties and oxidative stability. The proposed technology could be implemented in industrial settings without significant modifications to existing production schemes; it represents a cost-effective alternative to imported bleaching clays
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (6 (140)) , 17-26
Open AccessAdsorption purification of sunflower oil using acid-activated montmorilonite and quality assessment
This study investigates the process of sunflower oil adsorption purification using acid-activated montmorillonite from the Cherkasy deposit. The paper considers the change in sunflower oil quality indicators resulting from adsorption treatment with natural dispersed minerals. This work reports a comprehensive solution to the problem of substantiating and devising efficient technology for vegetable oil purification that simultaneously removes impurities, oxidation products, as well as heavy metal cations. Process efficiency was evaluated using physicochemical methods, including determination of acid, color, peroxide values, mass fraction of phosphorus-containing substances, moisture, volatile matter, as well as chromatographic-mass spectrometric analysis of oil composition. The results of experimental and pilot-scale studies demonstrate that the use of acid-activated montmorillonite at a dosage of 1% by oil mass, a temperature of 90–110°C, and a contact time of 20–30 min, ensures a reduction in the peroxide value to 3.0–3.9 mmol O2/kg, the color value to 6–9 mg I2, and the mass fraction of phosphorus-containing substances to 0.01–0.05%. It has been shown that adsorption purification does not affect the basic triacylglycerol composition of the oil but promotes the removal of oxidized compounds that deteriorate its consumer properties and oxidative stability. The proposed technology could be implemented in industrial settings without significant modifications to existing production schemes; it represents a cost-effective alternative to imported bleaching clays
- Open Access
- 16 April 2026
- Published by Khmelnytskyi National University in Development Service Industry Management
- No. 2,p. 148-154
РОЗРОБЛЕННЯ НАТУРАЛЬНИХ СОУСІВ ДЛЯ ЗАКЛАДІВ РЕСТОРАННОГО ГОСПОДАРСТВА В КОНТЕКСТІ КОНЦЕПЦІЇ CLEAN LABEL
The article presents a comprehensive study of formulation optimization of fruit and vegetable sauces intended for food service establishments within the framework of the Clean Label concept. The object of the research was defined as the technological processes involved in the production of fruit and vegetable sauces, while the subject of the study included pumpkin and sea buckthorn puree, functional ingredients such as inulin, low-methoxyl pectin, and apple dietary fiber, as well as flavoring and aromatic components. Four formulation variants were developed: a control sample containing xanthan gum and modified starch, and three experimental samples characterized by the gradual replacement of conventional hydrocolloid thickeners with natural structuring ingredients and by partial or complete reduction of refined sugar. The study analyzes the relationship between formulation composition and indicators of biological value, including ascorbic acid, carotenoids, total phenolic compounds, and dietary fiber content. An increase in bioactive components was observed in the experimental samples compared to the control (ascorbic acid up to 24.1 mg/100 g; total phenolics up to 176 mg/100 g; dietary fiber up to 7.9 g/100 g). At the same time, a reduction in energy value (to 104–112 kcal/100 g) and glycemic load (to 2.3–4.7 versus 10.0 in the control sample) was established, indicating a lower metabolic impact of the product. Sensory evaluation demonstrated high consumer acceptability of the optimized formulations (4.64–4.76 points versus 4.46 in the control), confirming that the replacement of traditional hydrocolloids with natural structuring ingredients does not compromise product quality. The findings demonstrate that formulation modification according to Clean Label principles enables the development of sauces with enhanced functional characteristics while maintaining desirable sensory properties. The practical relevance of the study lies in the potential application of the developed sauces in food service operations oriented toward healthy nutrition, transparent ingredient composition, and improved product competitiveness. Further research is recommended to investigate packaging solutions and storage conditions suitable for restaurant production environments.
- 16 April 2026
- Published by Khmelnytskyi National University in Development Service Industry Management
- No. 2,p. 148-154
Open AccessРОЗРОБЛЕННЯ НАТУРАЛЬНИХ СОУСІВ ДЛЯ ЗАКЛАДІВ РЕСТОРАННОГО ГОСПОДАРСТВА В КОНТЕКСТІ КОНЦЕПЦІЇ CLEAN LABEL
The article presents a comprehensive study of formulation optimization of fruit and vegetable sauces intended for food service establishments within the framework of the Clean Label concept. The object of the research was defined as the technological processes involved in the production of fruit and vegetable sauces, while the subject of the study included pumpkin and sea buckthorn puree, functional ingredients such as inulin, low-methoxyl pectin, and apple dietary fiber, as well as flavoring and aromatic components. Four formulation variants were developed: a control sample containing xanthan gum and modified starch, and three experimental samples characterized by the gradual replacement of conventional hydrocolloid thickeners with natural structuring ingredients and by partial or complete reduction of refined sugar. The study analyzes the relationship between formulation composition and indicators of biological value, including ascorbic acid, carotenoids, total phenolic compounds, and dietary fiber content. An increase in bioactive components was observed in the experimental samples compared to the control (ascorbic acid up to 24.1 mg/100 g; total phenolics up to 176 mg/100 g; dietary fiber up to 7.9 g/100 g). At the same time, a reduction in energy value (to 104–112 kcal/100 g) and glycemic load (to 2.3–4.7 versus 10.0 in the control sample) was established, indicating a lower metabolic impact of the product. Sensory evaluation demonstrated high consumer acceptability of the optimized formulations (4.64–4.76 points versus 4.46 in the control), confirming that the replacement of traditional hydrocolloids with natural structuring ingredients does not compromise product quality. The findings demonstrate that formulation modification according to Clean Label principles enables the development of sauces with enhanced functional characteristics while maintaining desirable sensory properties. The practical relevance of the study lies in the potential application of the developed sauces in food service operations oriented toward healthy nutrition, transparent ingredient composition, and improved product competitiveness. Further research is recommended to investigate packaging solutions and storage conditions suitable for restaurant production environments.
- Open Access
- 26 March 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 363 (2) , 316-323
РОЗРОБЛЕННЯ РЕЦЕПТУРИ НАПОЇВ НА ОСНОВІ ПЛОДОВО-ЯГІДНОЇ СИРОВИНИ З ЕКСТРАКТОМ CORDYCEPS MILITARIS ТА ІМУНОМОДУЛЮЮЧИМ ЕФЕКТОМ ДЛЯ ВІЙСЬКОВОСЛУЖБОВЦІВ
Under conditions of prolonged high physical and psycho-emotional load typical for military service, there is an urgent need for special-purpose foods capable of simultaneously supporting hydration, providing bioactive compounds, and strengthening adaptive reserves. Fruit- and berry-based functional beverages represent a promising technological platform because they combine good sensory acceptance with the possibility of enrichment by natural antioxidants (polyphenols, anthocyanins, carotenoids) and vitamin C. However, preservation of thermolabile components during heat treatment and the formation of a stable taste profile in the presence of specific functional ingredients require scientifically justified processing solutions. The aim of this study was to develop formulations and processing technology for functional beverages based on fruit and berry raw materials supplemented with Cordyceps militaris extract in order to increase nutritional and biological value for military personnel. The object of the research was the beverage manufacturing process, while the subject was the formulation composition, thermal processing regimes, and quality indicators of beverages containing cordyceps extract. Four formulations were designed: K1 and K2 (without cordyceps) and K3 and K4 (with C. militaris extract at 2.0 g per 1000 g of beverage). The extract was incorporated at 50–60 °C to minimize degradation of bioactive substances and reduce the risk of undesirable off-flavors. The semi-finished product was heat-treated at 85–90 °C for 5–10 min, and final pasteurization was performed at 85–88 °C for 10–15 min followed by cooling. Sensory evaluation was conducted by a trained panel using a 5-point scale; the energy value and physicochemical indicators were determined (pH, titratable acidity, sugars, total soluble solids/dry matter, vitamin C, β-carotene, and total phenolics expressed as gallic acid equivalents). The developed beverages demonstrated high sensory acceptability: total sensory scores were 24.7 (K1) and 23.5 (K2), and 24.15 (K3) and 22.9 (K4), corresponding to mean scores of 4.58–4.94. Formulation K1 was prioritized due to a more balanced taste and better clarity, whereas K4 showed higher acidity and the most pronounced “functional profile”. The energy value remained low: 7.25–7.40 kcal/100 g for K1–K2 and 7.89–7.95 kcal/100 g for K3–K4, indicating that cordyceps extract can be used as a functional additive without substantially increasing caloric content. Physicochemical parameters of K1–K4 were within technologically favorable ranges: pH 3.10 – 3.42; titratable acidity 0.30 – 0.52%; vitamin C 18.36–48.25 mg/100 g; β-carotene 0.35–1.31 mg/100 g; total phenolics 120.23–240.43 mg/100 g, suggesting a high antioxidant potential. The findings support the feasibility of K1 - K4 for the production of functional beverages for special-purpose nutrition and justify further research into the stability of bioactive compounds during storage.
- 26 March 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 363 (2) , 316-323
Open AccessРОЗРОБЛЕННЯ РЕЦЕПТУРИ НАПОЇВ НА ОСНОВІ ПЛОДОВО-ЯГІДНОЇ СИРОВИНИ З ЕКСТРАКТОМ CORDYCEPS MILITARIS ТА ІМУНОМОДУЛЮЮЧИМ ЕФЕКТОМ ДЛЯ ВІЙСЬКОВОСЛУЖБОВЦІВ
Under conditions of prolonged high physical and psycho-emotional load typical for military service, there is an urgent need for special-purpose foods capable of simultaneously supporting hydration, providing bioactive compounds, and strengthening adaptive reserves. Fruit- and berry-based functional beverages represent a promising technological platform because they combine good sensory acceptance with the possibility of enrichment by natural antioxidants (polyphenols, anthocyanins, carotenoids) and vitamin C. However, preservation of thermolabile components during heat treatment and the formation of a stable taste profile in the presence of specific functional ingredients require scientifically justified processing solutions. The aim of this study was to develop formulations and processing technology for functional beverages based on fruit and berry raw materials supplemented with Cordyceps militaris extract in order to increase nutritional and biological value for military personnel. The object of the research was the beverage manufacturing process, while the subject was the formulation composition, thermal processing regimes, and quality indicators of beverages containing cordyceps extract. Four formulations were designed: K1 and K2 (without cordyceps) and K3 and K4 (with C. militaris extract at 2.0 g per 1000 g of beverage). The extract was incorporated at 50–60 °C to minimize degradation of bioactive substances and reduce the risk of undesirable off-flavors. The semi-finished product was heat-treated at 85–90 °C for 5–10 min, and final pasteurization was performed at 85–88 °C for 10–15 min followed by cooling. Sensory evaluation was conducted by a trained panel using a 5-point scale; the energy value and physicochemical indicators were determined (pH, titratable acidity, sugars, total soluble solids/dry matter, vitamin C, β-carotene, and total phenolics expressed as gallic acid equivalents). The developed beverages demonstrated high sensory acceptability: total sensory scores were 24.7 (K1) and 23.5 (K2), and 24.15 (K3) and 22.9 (K4), corresponding to mean scores of 4.58–4.94. Formulation K1 was prioritized due to a more balanced taste and better clarity, whereas K4 showed higher acidity and the most pronounced “functional profile”. The energy value remained low: 7.25–7.40 kcal/100 g for K1–K2 and 7.89–7.95 kcal/100 g for K3–K4, indicating that cordyceps extract can be used as a functional additive without substantially increasing caloric content. Physicochemical parameters of K1–K4 were within technologically favorable ranges: pH 3.10 – 3.42; titratable acidity 0.30 – 0.52%; vitamin C 18.36–48.25 mg/100 g; β-carotene 0.35–1.31 mg/100 g; total phenolics 120.23–240.43 mg/100 g, suggesting a high antioxidant potential. The findings support the feasibility of K1 - K4 for the production of functional beverages for special-purpose nutrition and justify further research into the stability of bioactive compounds during storage.