Yuliia Semenova
Yuliia Semenova has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Florian Seitz
Deutsches Geodätisches Forschungsinstitut, Technische Universität München, Germany
2 shared publications - Inna Skurativska
Subbotin Institute of Geophysics of NAS of Ukraine, Palladin Avenue 32, Kyiv 03142, Ukraine
2 shared publications - Sergii Skurativskyi
Division of Geodynamics of Explosion, Subbotin Institute of Geophysics of NAS of Ukraine, Kyiv, Ukraine
2 shared publications Inna Skurativska
1 shared publication- Kyrylo Nikolaiev
Interregional Academy of Personnel Management
1 shared publication - Manuela Seitz
Technical University of Munich
1 shared publication
Latest Publications
- 15 August 2026
- Published by Springer Nature
- p. 473-482
Elements of Seismic Hazard Assessment in the Shamkir–Mingachevir Hydropower Region of Azerbaijan
- 15 August 2026
- Published by Springer Nature
- p. 473-482
Elements of Seismic Hazard Assessment in the Shamkir–Mingachevir Hydropower Region of Azerbaijan
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Application of SBAS-InSAR for monitoring geothermal-induced ground deformation in the Munich Region
This study demonstrates the capability of the Small Baseline Subset (SBAS-InSAR) technique to resolve low-magnitude surface deformation in regions prone to high spatial and temporal decorrelation. By processing Sentinel-1 data (October 2020–June 2023) at dual resolutions of 80 m and 160 m for the Munich geothermal region, we resolved vertical and horizontal displacement rates of up to ±2 mm/year. The rates are low compared to many geophysical signals, but they are clearly resolvable with SBAS-InSAR. This demonstrates the technique's utility for monitoring complex environments such as urban infrastructures. The results are evaluated through comparison with external data obtained using the PS-InSAR technique.In the Munich region, geothermal operations have previously triggered minor seismic events, such as in Unterhaching and Poing. We aim to study if non-linear stress changes that precede seismic failure can be identified in the time series and isolated from other processes, such as construction works (e.g., the new railway line), as well as other geophysical processes like hydrology. Subtle velocity gradients could serve as critical indicators of subsurface stress accumulation and provide an important empirical basis for validating geomechanical models and ensuring the long-term safety of geothermal energy expansion.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessApplication of SBAS-InSAR for monitoring geothermal-induced ground deformation in the Munich Region
This study demonstrates the capability of the Small Baseline Subset (SBAS-InSAR) technique to resolve low-magnitude surface deformation in regions prone to high spatial and temporal decorrelation. By processing Sentinel-1 data (October 2020–June 2023) at dual resolutions of 80 m and 160 m for the Munich geothermal region, we resolved vertical and horizontal displacement rates of up to ±2 mm/year. The rates are low compared to many geophysical signals, but they are clearly resolvable with SBAS-InSAR. This demonstrates the technique's utility for monitoring complex environments such as urban infrastructures. The results are evaluated through comparison with external data obtained using the PS-InSAR technique.In the Munich region, geothermal operations have previously triggered minor seismic events, such as in Unterhaching and Poing. We aim to study if non-linear stress changes that precede seismic failure can be identified in the time series and isolated from other processes, such as construction works (e.g., the new railway line), as well as other geophysical processes like hydrology. Subtle velocity gradients could serve as critical indicators of subsurface stress accumulation and provide an important empirical basis for validating geomechanical models and ensuring the long-term safety of geothermal energy expansion.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Geodetic monitoring of surface deformation for mitigating induced seismicity in Bavarian geothermal operations
Geothermal energy is a significant source of clean, renewable energy, and the Bavarian Molasse Basin demonstrates exceptional potential for its development. Over the past two decades, the region has made remarkable progress in harnessing geothermal energy. Between 1998 and 2021, a total of 30 deep geothermal energy projects were implemented in Bavaria, with 24 systems currently in operation. Munich is a leader among European cities in utilizing centralized geothermal systems, with plans to fully cover the city’s energy needs through geothermal resources by 2040.However, the operation of geothermal power plants can induce seismic activity and alter the stress-strain state of the subsurface, posing potential threats to the environment and population. Induced seismicity is a key issue for geothermal projects worldwide, where its occurrence has caused significant delays in development and, in some cases, damage to buildings and infrastructure.To evaluate the impact of geothermal activity on surface deformation, we processed a dense network of Sentinel-1 interferograms (2018-2021) using Small Baseline Subset (SBAS) InSAR time-series analysis through NASA's Alaska Satellite Facility (ASF) OpenSARLab. This approach enabled us to generate high-precision cumulative displacement and velocity maps across Munich and its surrounding areas over the three-year period.Our analysis revealed localized ground uplift throughout the region, with pronounced deformation rates near certain geothermal plants, in some cases reaching a few cm/year. These uplift patterns appear to correlate with geothermal operations, particularly reservoir pressure changes and fluid reinjection. In contrast, areas of subsidence, observed away from geothermal sites, appear to result from natural geological processes such as sediment compaction, groundwater extraction, and karstification.These findings are vital for seismic hazard assessments, as surface deformation is closely tied to induced seismicity in geothermal environments. The study underscores the importance of advanced geodetic monitoring techniques, such as InSAR, for evaluating seismic risks and ensuring the sustainable development of geothermal energy resources.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessGeodetic monitoring of surface deformation for mitigating induced seismicity in Bavarian geothermal operations
Geothermal energy is a significant source of clean, renewable energy, and the Bavarian Molasse Basin demonstrates exceptional potential for its development. Over the past two decades, the region has made remarkable progress in harnessing geothermal energy. Between 1998 and 2021, a total of 30 deep geothermal energy projects were implemented in Bavaria, with 24 systems currently in operation. Munich is a leader among European cities in utilizing centralized geothermal systems, with plans to fully cover the city’s energy needs through geothermal resources by 2040.However, the operation of geothermal power plants can induce seismic activity and alter the stress-strain state of the subsurface, posing potential threats to the environment and population. Induced seismicity is a key issue for geothermal projects worldwide, where its occurrence has caused significant delays in development and, in some cases, damage to buildings and infrastructure.To evaluate the impact of geothermal activity on surface deformation, we processed a dense network of Sentinel-1 interferograms (2018-2021) using Small Baseline Subset (SBAS) InSAR time-series analysis through NASA's Alaska Satellite Facility (ASF) OpenSARLab. This approach enabled us to generate high-precision cumulative displacement and velocity maps across Munich and its surrounding areas over the three-year period.Our analysis revealed localized ground uplift throughout the region, with pronounced deformation rates near certain geothermal plants, in some cases reaching a few cm/year. These uplift patterns appear to correlate with geothermal operations, particularly reservoir pressure changes and fluid reinjection. In contrast, areas of subsidence, observed away from geothermal sites, appear to result from natural geological processes such as sediment compaction, groundwater extraction, and karstification.These findings are vital for seismic hazard assessments, as surface deformation is closely tied to induced seismicity in geothermal environments. The study underscores the importance of advanced geodetic monitoring techniques, such as InSAR, for evaluating seismic risks and ensuring the sustainable development of geothermal energy resources.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Seismic hazard evaluation and soil response analysis of Shamkir and Mingachevir hydroelectric power stations
In regions prone to seismic activity, assessing the seismic hazard of hydroelectric power stations is crucial for maintaining the dependability and robustness of critical infrastructure. In this study, we investigate and compare the seismic response of near-surface soil at the Shamkir and Mingachevir hydroelectric power stations in Azerbaijan when subjected to earthquakes of different magnitudes, utilizing numerical modeling techniques. This analysis not only enables a direct comparison of the sites but also facilitates the identification of underlying geological factors influencing their seismic vulnerability.We particularly focus on the upper 30 meters of soil, exploring its substantial influence on the amplitude-frequency composition of motions and, consequently, its impact on the surface's seismic response. Examining the soil's characteristics, we assess its capacity to either amplify or attenuate seismic motions at specific frequencies. Additionally, this study explores the intricate effects of nonlinear soil deformation on the frequency selectivity of soil, elucidating its role in shaping the amplification patterns of seismic motions. These findings are not only relevant for advancing scientific knowledge but also hold practical significance in formulating effective strategies for enhancing the seismic resilience of critical infrastructure in earthquake-prone regions.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessSeismic hazard evaluation and soil response analysis of Shamkir and Mingachevir hydroelectric power stations
In regions prone to seismic activity, assessing the seismic hazard of hydroelectric power stations is crucial for maintaining the dependability and robustness of critical infrastructure. In this study, we investigate and compare the seismic response of near-surface soil at the Shamkir and Mingachevir hydroelectric power stations in Azerbaijan when subjected to earthquakes of different magnitudes, utilizing numerical modeling techniques. This analysis not only enables a direct comparison of the sites but also facilitates the identification of underlying geological factors influencing their seismic vulnerability.We particularly focus on the upper 30 meters of soil, exploring its substantial influence on the amplitude-frequency composition of motions and, consequently, its impact on the surface's seismic response. Examining the soil's characteristics, we assess its capacity to either amplify or attenuate seismic motions at specific frequencies. Additionally, this study explores the intricate effects of nonlinear soil deformation on the frequency selectivity of soil, elucidating its role in shaping the amplification patterns of seismic motions. These findings are not only relevant for advancing scientific knowledge but also hold practical significance in formulating effective strategies for enhancing the seismic resilience of critical infrastructure in earthquake-prone regions.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Seismic Site Effects Assessment at the Illinois Basin–Decatur Project (IBDP) site
Carbon capture and storage (CCS), is key to curtail carbon dioxide (CO2) atmospheric emissions and mitigate climate change. The complexities of carbon dioxide (CO2) storage are deeply intertwined with induced seismicity, a phenomenon set in motion by pore pressure, temperature and stress changes occurring during CO2 injection. If perceived, induced seismicity may negatively affect public perception of this carbon-removal technology. Here, we focus on assessing ground motion manifestations on the surface during hypothetical earthquakes with magnitudes ranging from 2 to 5, occurring at a depth of 2 km beneath the upper edge of the Precambrian basement rock of the Illinois Basin–Decatur Project (IBDP) site. The objective of this investigation is to analyze the seismic response of the IBDP site surface to earthquakes of specific magnitudes, considering their potential occurrence in connection with CO2 storage at the gigatonne scale.The analysis of ground motion manifestations on the surface during various earthquake scenarios of different magnitudes at the IBDP site provides valuable insights into the seismic vulnerability of the location. It allows for a comprehensive assessment of both amplification and attenuation effects, revealing how the geological and geotechnical characteristics of the subsurface rock influence ground motion. Understanding how the site responds to seismic events allows for a more accurate assessment of potential risks and vulnerabilities.Employing the equivalent linear approach of Ground Response Analysis, we computed the Fourier amplitude spectra of seismic motions on the surface of the IBDP site for earthquakes with magnitudes 2, 3, 4, and 5. These spectra are then compared with the Fourier amplitude spectra of input motions. The Fourier amplitude spectrum illuminates how ground motion amplitude is distributed across various frequencies. We also analyze the calculated Fourier Amplitude Ratio.Through a thorough comparison of these spectra, we explore the shifts in amplitude-frequency composition as the magnitude increases. This analysis is instrumental in identifying frequencies that gain prominence or diminish, revealing resonant frequencies and their correlation with input wave amplitude. These findings are crucial for understanding the dynamics of seismic events across different magnitudes and their environmental repercussions at the IBDP study site. Moreover, they have the potential to contribute to the optimization of practices in CCS.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessSeismic Site Effects Assessment at the Illinois Basin–Decatur Project (IBDP) site
Carbon capture and storage (CCS), is key to curtail carbon dioxide (CO2) atmospheric emissions and mitigate climate change. The complexities of carbon dioxide (CO2) storage are deeply intertwined with induced seismicity, a phenomenon set in motion by pore pressure, temperature and stress changes occurring during CO2 injection. If perceived, induced seismicity may negatively affect public perception of this carbon-removal technology. Here, we focus on assessing ground motion manifestations on the surface during hypothetical earthquakes with magnitudes ranging from 2 to 5, occurring at a depth of 2 km beneath the upper edge of the Precambrian basement rock of the Illinois Basin–Decatur Project (IBDP) site. The objective of this investigation is to analyze the seismic response of the IBDP site surface to earthquakes of specific magnitudes, considering their potential occurrence in connection with CO2 storage at the gigatonne scale.The analysis of ground motion manifestations on the surface during various earthquake scenarios of different magnitudes at the IBDP site provides valuable insights into the seismic vulnerability of the location. It allows for a comprehensive assessment of both amplification and attenuation effects, revealing how the geological and geotechnical characteristics of the subsurface rock influence ground motion. Understanding how the site responds to seismic events allows for a more accurate assessment of potential risks and vulnerabilities.Employing the equivalent linear approach of Ground Response Analysis, we computed the Fourier amplitude spectra of seismic motions on the surface of the IBDP site for earthquakes with magnitudes 2, 3, 4, and 5. These spectra are then compared with the Fourier amplitude spectra of input motions. The Fourier amplitude spectrum illuminates how ground motion amplitude is distributed across various frequencies. We also analyze the calculated Fourier Amplitude Ratio.Through a thorough comparison of these spectra, we explore the shifts in amplitude-frequency composition as the magnitude increases. This analysis is instrumental in identifying frequencies that gain prominence or diminish, revealing resonant frequencies and their correlation with input wave amplitude. These findings are crucial for understanding the dynamics of seismic events across different magnitudes and their environmental repercussions at the IBDP study site. Moreover, they have the potential to contribute to the optimization of practices in CCS.
- 1 January 2022
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- No. 1 (96),p. 20-26
RESONANT PROPERTIES OF LAYERED SOIL MASSIF CONTAINING A LAYER WITH OSCILLATING INCLUSIONS
The paper is devoted to modeling of the seismic reaction of an inhomogeneous soil massif consisting of three layers that can incorporate oscillating inclusions. The description of the behavior of soil strata is carried out on the basis of the continual approach, within which the dynamics of the medium is determined by a system of equations of motion and equations of state, where the elastic or visco-elastic properties of the medium are indicated. Classical linear models are quite simple and well verified experimentally, but due to the complex structure of natural geomedia, these models cannot always adequately describe wave processes in them. This requires improvement of models in such a way as to take into account the internal structure of materials. In this paper, to describe the shear dynamics of an inhomogeneous soil massif, the equations of motion for a continuous medium in the form of mutually penetrating continua are used, one of which coincides with the Kelvin-Voigt carrier medium, and the other one is described by a set of noninteracting partial oscillators. Various inclusions, cracks, or cavities filled with gases and/or liquids can act as oscillators. The equations of motion are supplemented by the compatibility conditions at the boundaries of the layers. The set of layers is considered, among which only one contains oscillating inclusions. The one-dimensional boundary value problem with a free surface and the harmonic law of deformation of massif's rigid bedrock is solved. Using the exact solution of the boundary value problem, the amplification factor of strains for massifs with characteristics close to natural is calculated. Moreover, the iterative procedure, which makes it possible to write down the final formula for the amplification factor in the case of a layered medium with layers of more than 3 is developed. It is shown that the incorporation of inclusions in one of the layers leads to the appearance of an additional resonance frequency, a shift of resonances to the low-frequency region, the appearance of zones with significant damping of resonance peaks. The results obtained make it possible to improve the computational methods for determining the quantitative parameters of seismic hazard when work on seismic micro zoning of construction and operational sites in the seismic regions of Ukraine is carried out.
- 1 January 2022
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- No. 1 (96),p. 20-26
RESONANT PROPERTIES OF LAYERED SOIL MASSIF CONTAINING A LAYER WITH OSCILLATING INCLUSIONS
The paper is devoted to modeling of the seismic reaction of an inhomogeneous soil massif consisting of three layers that can incorporate oscillating inclusions. The description of the behavior of soil strata is carried out on the basis of the continual approach, within which the dynamics of the medium is determined by a system of equations of motion and equations of state, where the elastic or visco-elastic properties of the medium are indicated. Classical linear models are quite simple and well verified experimentally, but due to the complex structure of natural geomedia, these models cannot always adequately describe wave processes in them. This requires improvement of models in such a way as to take into account the internal structure of materials. In this paper, to describe the shear dynamics of an inhomogeneous soil massif, the equations of motion for a continuous medium in the form of mutually penetrating continua are used, one of which coincides with the Kelvin-Voigt carrier medium, and the other one is described by a set of noninteracting partial oscillators. Various inclusions, cracks, or cavities filled with gases and/or liquids can act as oscillators. The equations of motion are supplemented by the compatibility conditions at the boundaries of the layers. The set of layers is considered, among which only one contains oscillating inclusions. The one-dimensional boundary value problem with a free surface and the harmonic law of deformation of massif's rigid bedrock is solved. Using the exact solution of the boundary value problem, the amplification factor of strains for massifs with characteristics close to natural is calculated. Moreover, the iterative procedure, which makes it possible to write down the final formula for the amplification factor in the case of a layered medium with layers of more than 3 is developed. It is shown that the incorporation of inclusions in one of the layers leads to the appearance of an additional resonance frequency, a shift of resonances to the low-frequency region, the appearance of zones with significant damping of resonance peaks. The results obtained make it possible to improve the computational methods for determining the quantitative parameters of seismic hazard when work on seismic micro zoning of construction and operational sites in the seismic regions of Ukraine is carried out.