GLGeorgiy Ya. Lipatov

Georgiy Ya. Lipatov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Georgiy Ya. Lipatov has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Assessment of working conditions and features of respiratory disorders in modern refractory manufacturing

    by Ольга Геннадьевна Другова, Elena P. Kashanskaya, Ольга Ивановна Гоголева, Георгий Яковлевич Липатов, Анна Алексеевна Федорук

    Introduction. Broad prospects for development of refractory manufacturing in Russia necessitate studies of the work environment, especially of the indoor air quality, and respiratory health effects of adverse occupational factors. The purpose of our study was to conduct a general hygienic assessment of working conditions of the core personnel engaged in contemporary refractory manufacturing for more than 10 years and establish their respiratory functional status. Materials and methods. We assessed working conditions of press operators of a Ural refractory manufacturing plant in compliance with Russian Guidelines R 2.2.2006–05. The respiratory functional status was established by the results of clinical instrumental testing of refractory production workers who were examined and/or treated at the occupational health clinic of the Yekaterinburg Medical Research Center for Prophylaxis and Health Protection in Industrial Workers in 2015–2021. Results. We gave a general assessment of working conditions of press operators engaged in the production of spinel periclase-carbon and fireclay-dinas molded refractories in the first refractory workshop, aluminosilicate refractories at the molding site, and corundum-graphite products in the second refractory workshop. We analyzed the results of instrumental testing and established characteristics of clinical disorders of the respiratory system. Limitations. The study has regional (Sverdlovsk Region) and occupational (workers of a refractory manufacturing plant) limitations. Conclusion. Occupational risk factors for refractory production workers include silica-containing aerosols, which levels exceed maximum allowable concentrations (Class 3.1), aerosols of disintegration of aluminum oxides (in refractory workshop No. 2), iron in concentrations below MACs (Class 2), higher concentrations of volatile products of phenol formaldehyde resins (Class 3.1 in terms of phenol and up to 3.4 in terms of formaldehyde), increased noise levels for all jobs (Class 3.2), and heavy physical labour (Classes 3.1–3.3). Features of clinical respiratory disorders in the core personnel (press operators) were scarcity of complaints and physical data, absence of pronounced coniotic (respirable dust-related) X-ray findings and inflammatory (septic and allergic) blood changes. Moderate obstructive airway disorders were observed in 30 % of the examined cases.


  • Morbidity with temporal disability in workers engaged in refined copper production

    by Георгий Яковлевич Липатов, Vadim I. Adrianovsky, Yulia N. Naritsyna, Алексей Анатольевич Самылкин, Наталья Викторовна Злыгостева, Ольга Ивановна Гоголева, Станислав Реамюрович Гусельников, Юлия Николаевна Нарицына

    Introduction. High ductility, electrical and thermal conductivity, and resistance to corrosion determine a high demand of the national economy for refined copper, thus necessitating a comprehensive study of the occupational environment and health status in workers employed in this branch of non-ferrous metallurgy. The purpose of our study was to assess the morbidity with temporal disability in workers engaged in the fire and electrolytic refining of copper. Materials and methods. Morbidity with temporal disability in both male and female workers was studied by means of its detailed personal record at one of the large copper refineries of the Middle Urals. Results. Among those engaged in copper smelting, the highest morbidity with temporal disability rates per one hundred workers were registered among repairers and auxiliary personnel (95.3 sick leave episodes and 1,147.8 days) in men and among overhead crane operators (52.8 episodes and 657.6 days) in women. In the copper electrolysis shop, the highest rates were noted among both men (86.7 episodes and 954.0 days) and women (77.8 episodes and 841.2 days) constituting the core personnel. We established that in the study cohort lung diseases ranked first among the causes of the morbidity with temporal disability followed by musculoskeletal diseases. Limitations. Such a study is feasible only at the enterprises that record and measure morbidity with temporal disability due to work. Conclusions. Our findings may indicate work-relation of morbidity with temporal disability in male repairers and auxiliary personnel, as well as female crane operators engaged in fire refining of copper and in both male and female core personnel engaged in electrolytic refining.


  • Open Access

    Assessment of the lung tissue fibrosis in workers exposed to silica-hazardous dust for a long time

    by Elena P. Kashanskaya, Георгий Яковлевич Липатов, Ольга Ивановна Гоголева, Ольга Михайловна Носырева, Yuliya A. Ganicheva, Станислав Реамюрович Гусельников

    Introduction. Silicosis is the most common and severe type of pneumoconiosis caused by inhalation of dust containing more than 10% of crystalline silica in the occupational setting. The chest X-ray plays a decisive role in the diagnosis of the disease. The purpose of our work was to establish lung tissue fibrosis in industrial workers suffering from silicosis. Materials and methods. In 2015–2022, ten patients with silicosis, employed at a Ural refractory manufacturing plant as press operators (Group 1) for the average of 17.23 ± 4.31 years, were examined at the Occupational Health Clinic of the Yekaterinburg Medical Research Center for Prophylaxis and Health Protection in Industrial Workers. The comparison group (Group 2) included 34 press operators without pneumoconiosis who had worked for more than 10 years in hazardous working conditions. The control group (Group 3) consisted of 32 people of different occupations unexposed to industrial dusts. All the subjects were matched by gender (male) and age (50.7 ± 5.25 years). Lung tissue fibrosis was measured by multislice computed tomography using a GE OPTIMA 660 128 Slice CT Scanner with accessories, GE HealthCare Japan, manufactured in 2012. The data were then analyzed in Statistica for Windows 7. Results. We established a decrease in tissue fibrosis in the apexes and inferior lobes of both lungs and an increase in the fibrosis in groups of target lymph nodes (11–14R, 2L, 10L) in the silicosis cases, and an increase in Hounsfield units in target groups of lymph nodes (2R, 4R, 10R, 11–14R, 2L, 11–14L) in the comparison group. Limitations. The study includes only workers engaged in refractory manufacturing with over 10 years of exposure to silica. For CT lung densitometry, the limitation is the permissible radiation dose of less than 5 mSv per year. Conclusion. The results of CT densitometry of the lungs and targeted groups of lymph nodes demonstrate its high efficiency in the quantitative assessment of dust-related disorders in patients with silicosis and in experienced workers occupationally exposed to crystalline silica.


  • Open Access

    Occupational health issues and respiratory toxicity of a complex of harmful factors in electrolytic and hydrometallurgical copper production

    by С. Р. Гусельников, O. I. Gogoleva, G. Ya. Lipatov, E. G. Plotko, В. И. Адриановский, A. A. Samylkin, E. E. Shmakova, Yu. N. Naritsyna, I. A. Ryzhkova

    Introduction. In recent decades, there has been a decrease in occupational morbidity at enterprises producing rough and refined copper, in the structure of which, nevertheless, bronchopulmonary pathology retains a leading position.The aim is to study the occupational risk of developing respiratory pathology in workers engaged in obtaining cathode copper by electrolysis and electorowinning methods, based on the study of working conditions of workplaces and clinical observation.Materials and methods. The object of the study were: Uralelectromed, V. Pyshma (UEM); Uralhydromed, Polevskoy (RMK). The subject of the study were 100 employees of the electrolysis shop of UEM – the 1st observation group; 102 people of the auxiliary workshops of UEM – the 2nd observation group; 92 workers of the extraction and electorowinning department of UGM – the 3rd observation group.Results. During electrolytic refining of copper, the leading harmful factors with respiratory toxicity are sulfuric acid aerosol, selenium dioxide, nickel, arsenic, and during electrovinig – sulfuric acid aerosol. Violations of ventilation function and pulmonary gas exchange were observed in 21.0 % of cases in persons of the 1st and in 15.7% of cases in patients of the 3rd observation group).Discussion. Changes in the function of external respiration (FVD) were established mainly by the obstructive type, namely, an increase in RV, FRC and RV/TLC and a decrease in FEV1, VC, FEV1/VC, FEV25-75 of mild and moderate severity were noted. The bronchodilation test revealed the reversibility of bronchial obstruction in both groups 1 and 3. Obstructive disorders and dynamic hyperventilation of the lungs in copper refining workers are probably a consequence of hyperreactivity of the bronchi in response to the irritating properties of sulfur-containing gases, arsenic and nickel compounds.Conclusion. The results of the study indicate respiratory toxicity of harmful factors in workers of electrolysis and electrovining, which corresponds to a high and average occupational risk of class 3.3 and class 3.2 assessment of working conditions and the results of mandatory periodic medical examinations.

  • Comparative analysis of the main occupations working conditions in the copper production by pyrometallurgical and hydrometallurgical methods in Russia

    by Georgiy Ya. Lipatov, Екатерина Евгеньевна Шмакова, Vadim I. Adrianovskiy, Natalia V. Zlygosteva, Eduard G. Plotko

    Introduction. The primary materials for copper production are sulfide copper-nickel and oxidized ores with a copper percentage of 1.5-4%, traditionally processed by the pyrometallurgical method. For processing depleted copper-containing raw materials (less than 1%), the pyrometallurgical approach is not commonly suitable. The introduced hydrometallurgical way differs by including in one production process, combined underground leaching of ore, extraction of copper from solution, and the following electrolysis. At the same time, insufficient attention is paid to the hydrometallurgical method of processing depleted copper raw materials from a hygienic standpoint in our country. Materials and methods. Based on the results of our research carried out at copper-smelting plants using pyro- and hydrometallurgical methods of processing raw materials, a comparative analysis was carried out for such indicators as the pollutants content in the workplaces’ air at different stages of production, predicted values of occupational cancer risks, toxicity indicators, and the health and essential physiological functions of workers. Results. Working under increased heat intensity in hot shops, exposure to sulfur-containing gases and industrial aerosols leads to significant changes in hemodynamics and thermoregulation stress in workers. In the hydrometallurgical production of copper, the only occupational hazard exceeding hygienic standards is sulfuric acid vapours, and changes in physiological parameters and thermoregulation are insignificant. The predicted values of occupational cancer risk for hydrometallurgical machines operators exceed the acceptable level after 9-10 years of working experience. For smelters, an unacceptable level of risk is achieved with up to 5 years of working experience. Conclusion. For the first time in the country, a hygienic assessment of the hydrometallurgical method of processing depleted copper raw materials was proved to be the only appropriate method of improving working conditions in copper production.


  • Open Access

    MORTALITY DUE TO MALIGNANT TUMORS IN WORKERS EMPLOYED IN THE COMPLEX PROCESSING OF COPPER METALLURGICAL WASTE

    by V. I. Adrianovsky, G. Ya. Lipatov, E. A. Kuzmina, N. V. Zlygosteva

    Introduction. Workers engaged in the complex processing of copper metallurgy waste are in contact with inorganic compounds of arsenic, nickel, lead, cadmium, and hexavalent chromium. The purpose of the study is to estimate the degree of carcinogenic risk for workers employed in the processing of copper metallurgy waste. Material and methods. The results of a retrospective study of deaths from cancer of workers in the recycling of copper metallurgy (sulfuric acid, bluestone and nickel vitriol production and processing of anode slimes) of a metallurgical plant to produce blister and refined copper are presented. The intensity of mortality and relative carcinogenic risk for workers were calculated (common as well as age-specific for men and women). A comparison of the observed and “expected” indices of the cancer mortality rate was carried out and the relative carcinogenic risk for workers was determined. Results. The highest levels of cancer mortality were found in the age range of 50-59 years. It’s noted excess observed mortality from malignant tumors over “expected” both men and women in most cancer locations. For men involved in the production of sulfuric acid, a high carcinogenic risk of developing malignant neoplasms of urinary organs. For women involved in the production of sulfuric acid, a high carcinogenic risk of developing malignant neoplasms of the liver. When receiving copper sulfate, men have the greatest carcinogenic risk for urinary organs for tumors, and women for lymphatic and hematopoietic tissue tumors. The processing of anodic sludges is associated with a carcinogenic risk for men on lung cancer, and for a woman - on tumors of lymphatic and hematopoietic tissue. Conclusion. Obtained epidemiological data indicate carcinogenic risk to workers involved in the complex recycling of copper metallurgy.


  • Open Access

    On updating the major regulations of SanPin 1.2.2353–08 “Carcinogenic factors and the main requirements to carcinogenic hazards prevention”

    by Vladimir B. Gurvich, Sergey V. Kuz’mIn, Elena A. Kuz’mIna, Sergey V. Yarushin, Vadim I. Adrianovskiy, Georgiy Ya. Lipatov, Natalya V. Zlygosteva, Tatyana S. Ustyugova, С. В. Кузьмин, Е. А. Кузьмина, et al.

    With transition of governmental supervision activities to risk-oriented model, a priority value is given to specification of a structured pack of legal regulatory and methodic documents on evaluating and managing carcinogenic risk for human health. Some aspects of risk analysis methodology are covered in recent changes of 52-FZ “On sanitary epidemiologic supervision”, but sanitary legislation lacks regulatory and methodic settings for procedures to evaluate and manage risk (including carcinogenic) for human health. This problem prevents implementation of contemporary prognostic models of development, application of complex preventive measures that are effective and resultant in prophylaxis, decrease, compensation and insurance of public health risks.


  • Open Access

    A comparative assessment of cancer-related mortality among workers employed at the various stages of pyrometallurgical production of copper

    by Vadim I. Adrianovskiy, Georgiy Ya. Lipatov, Yelena A. Kuz’mIna, Natalya V. Zlygosteva, Tatyana S. Ustyugova, Irina I. Adamtseva, Aleksey A. Samylkin, Yekaterina Ye. Shmakova, Е. А. Кузьмина, Е. Е. Шмакова

    The authors present comparative evaluation of influence caused by complex of carcinogenic work conditions of main stages of copper pyrometallic production on cancer-related mortality of the workers. Findings are that raw copper enrichment, blister copper recovery through reverberative furnace melting and f re refining of blister copper are carcinogenic danger for the workers. Malignancies frequency in the workers appeared to directly depend on occupational exposure to arsenic. The results of the workers’ cancer-related mortality correspond to data of carcinogenic risks evaluation at all stages of metallurgic production of copper. Given the study results, reasonable suggestion is to include raw copper enrichment into official list of occupational processes with carcinogenic danger.

  • Open Access

    Assessing occupational carcinogenic risks for health of workers employed at blister copper production enterprise

    by Yekaterinburg Medical Scientific Center for Prevention and Health Protection for workers employed at industrial enterprises, V.I. Adrianovskiy, Ural State Medical University, G.Ya. Lipatov, E.A. Kuz’mina, N.V. Zlygosteva, K.Yu. Russkikh, N.P. Sharipova, T.V. Bushueva, V.O. Ruzakov, et al.