Taraneh Jafari Behbahani
Research Subjects
Taraneh Jafari Behbahani has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
A. Dahaghin
Research Institute of Petroleum Industry (RIPI), Tehran, Iran
2 shared publicationsAmin Dehghani
Department of Chemical and Petroleum Engineering Sharif University of Technology Tehran Iran
2 shared publicationsHossein Mashhadi Meighani
Research Institute of Petroleum Industry (RIPI) Tehran Iran
2 shared publicationsMohammad Reza Ehsani
2 shared publicationsA. A. Miranbeigi
Research Institute of Petroleum Industry (RIPI)
1 shared publicationAli Akbar Miranbeigi
Research Institute of Petroleum Industry (RIPI)
1 shared publication
Latest Publications
- 1 December 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (6) , 3304-3324
A novel investigation based on the tree‐based machine learning methods on rheological behaviour of waxy crude oils
Flow assurance issues concerning wax precipitation in crude oil transportation pipelines make it necessary to predict the flow behaviour at different operating conditions. This work attempted to model measured shear stress and viscosity of waxy crude oils using tree‐based machine learning methods and consider wax content, additives, and solvent concentration as input parameters of models. Amongst all implemented techniques, the Extra trees model performed as a potential estimator in waxy oils rheology studies. Two models were run using the final values collected during hyperparameter tuning for shear stress and viscosity. Results show a root mean squared error value of 14.15 and a coefficient of determination ( R 2 ) of 0.998. RMSE of shear stress training dataset was reduced to 9.50 from 35.46 by adjusting hyperparameters of the model. The assessed techniques encompass decision tree, extra trees, gradient boosting, light gradient boosting machine, linear regression, random forest, ridge regression, and XGBoost. Also, in this research, three rheological models of power law, Dekee and Casson models have been used to correlate apparent viscosity values, and it was concluded that Dekee and Casson models have shown an acceptable match with experimental data. Also, the rheological behaviour of three crude oils in the absence/presence of flow improvers was investigated, and it was concluded that ethylene‐vinyl acetate (EVA) copolymer has performance in changing the flow behaviour from non‐Newtonian to Newtonian even at temperatures below WAT. Moreover, the addition of small quantities of asphaltene solvents, such as toluene, can improve the viscosity of crude oil with high wax content.
- 1 December 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (6) , 3304-3324
A novel investigation based on the tree‐based machine learning methods on rheological behaviour of waxy crude oils
Flow assurance issues concerning wax precipitation in crude oil transportation pipelines make it necessary to predict the flow behaviour at different operating conditions. This work attempted to model measured shear stress and viscosity of waxy crude oils using tree‐based machine learning methods and consider wax content, additives, and solvent concentration as input parameters of models. Amongst all implemented techniques, the Extra trees model performed as a potential estimator in waxy oils rheology studies. Two models were run using the final values collected during hyperparameter tuning for shear stress and viscosity. Results show a root mean squared error value of 14.15 and a coefficient of determination ( R 2 ) of 0.998. RMSE of shear stress training dataset was reduced to 9.50 from 35.46 by adjusting hyperparameters of the model. The assessed techniques encompass decision tree, extra trees, gradient boosting, light gradient boosting machine, linear regression, random forest, ridge regression, and XGBoost. Also, in this research, three rheological models of power law, Dekee and Casson models have been used to correlate apparent viscosity values, and it was concluded that Dekee and Casson models have shown an acceptable match with experimental data. Also, the rheological behaviour of three crude oils in the absence/presence of flow improvers was investigated, and it was concluded that ethylene‐vinyl acetate (EVA) copolymer has performance in changing the flow behaviour from non‐Newtonian to Newtonian even at temperatures below WAT. Moreover, the addition of small quantities of asphaltene solvents, such as toluene, can improve the viscosity of crude oil with high wax content.
- Open Access
- 24 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
Experimental study of polymeric composite reinforced with carbon fiber for mud lost control application
This study introduces a novel application of composite materials as Lost Circulation Materials (LCM), leveraging their high specific strength, non-abrasiveness, and environmentally friendly profile. A new formulation of Carbon Fiber Reinforced Polymer (CFRP) composites was developed using an advanced twin-screw extrusion process followed by compression molding. Their efficacy in sealing fractures was quantitatively assessed in accordance with American Petroleum Institute (API) standards using a Bridging Material Tester (BMT). Comparative analysis with previous studies on Bagasse Fiber Reinforced Polymer (BFRP) composites was conducted. Interfacial interactions and fracture morphology were examined through Scanning Electron Microscopy (SEM), revealing the CFRP composites’ superior resistance to water absorption. The moisture absorption tests indicated that the CFRP absorbed 0.7% moisture after 24 h, compared to 15% for BFRP, suggesting enhanced durability in wet conditions. However, despite their robust mechanical properties, they exhibited lower fracture-sealing efficiency compared to BFRP composites. These findings not only underscore the potential of composite-based LCMs in enhancing drilling safety but also guide future research toward optimizing composite formulations for more effective field applications.
- 24 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
Open AccessExperimental study of polymeric composite reinforced with carbon fiber for mud lost control application
This study introduces a novel application of composite materials as Lost Circulation Materials (LCM), leveraging their high specific strength, non-abrasiveness, and environmentally friendly profile. A new formulation of Carbon Fiber Reinforced Polymer (CFRP) composites was developed using an advanced twin-screw extrusion process followed by compression molding. Their efficacy in sealing fractures was quantitatively assessed in accordance with American Petroleum Institute (API) standards using a Bridging Material Tester (BMT). Comparative analysis with previous studies on Bagasse Fiber Reinforced Polymer (BFRP) composites was conducted. Interfacial interactions and fracture morphology were examined through Scanning Electron Microscopy (SEM), revealing the CFRP composites’ superior resistance to water absorption. The moisture absorption tests indicated that the CFRP absorbed 0.7% moisture after 24 h, compared to 15% for BFRP, suggesting enhanced durability in wet conditions. However, despite their robust mechanical properties, they exhibited lower fracture-sealing efficiency compared to BFRP composites. These findings not only underscore the potential of composite-based LCMs in enhancing drilling safety but also guide future research toward optimizing composite formulations for more effective field applications.
- Open Access
- 14 December 2022
- Published by Wiley
A new approach to rheological properties of waxy crude oils using the tree-based machine learning methods
In this work, the rheological behavior of three crude oils, with low, middle and high wax content, in the absence/presence of polymeric and aromatic flow improvers was investigated. The rheological data cover the temperature range of 0 to 60 °C to include the wax appearance temperature (WAT). The results indicated that EVA copolymer has remarkable performance in change of flow behavior from non-Newtonian to Newtonian even at temperatures below WAT. Moreover, the addition of small quantities of asphaltene solvents such as toluene can improve viscosity of crude oil with high wax content. In addition to experimental and analytical modeling investigations, this work attempted to model measured shear stress and viscosity of waxy crude oils using tree-based machine learning methods and consider wax content and additives concentration as input parameters of models. Amongst all implemented techniques, Extra Trees model performed as a potential predictor in waxy oils rheology studies.
- 14 December 2022
- Published by Wiley
Open AccessA new approach to rheological properties of waxy crude oils using the tree-based machine learning methods
In this work, the rheological behavior of three crude oils, with low, middle and high wax content, in the absence/presence of polymeric and aromatic flow improvers was investigated. The rheological data cover the temperature range of 0 to 60 °C to include the wax appearance temperature (WAT). The results indicated that EVA copolymer has remarkable performance in change of flow behavior from non-Newtonian to Newtonian even at temperatures below WAT. Moreover, the addition of small quantities of asphaltene solvents such as toluene can improve viscosity of crude oil with high wax content. In addition to experimental and analytical modeling investigations, this work attempted to model measured shear stress and viscosity of waxy crude oils using tree-based machine learning methods and consider wax content and additives concentration as input parameters of models. Amongst all implemented techniques, Extra Trees model performed as a potential predictor in waxy oils rheology studies.
- 21 February 2022
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 139, 109319
A new experimental and theoretical approach for viscosity Iranian heavy crude oils based on tuning friction theory and friction volume theory parameters
- 21 February 2022
- Published by Elsevier in Inorganic Chemistry Communications
- Vol. 139, 109319
A new experimental and theoretical approach for viscosity Iranian heavy crude oils based on tuning friction theory and friction volume theory parameters
- 24 December 2021
- Published by Pleiades Publishing Ltd in Петролеомика
- Vol. 1 (1) , 116-126
Экспериментальное исследование и моделирование осаждения парафинов в трубопроводах, основанное на анализе содержания асфальтенов в нефти
Предлагается новая модель осаждения парафинов. Летучесть твердой фазы была рассчитана косвенным путем, исходя из летучести беспримесной жидкой фазы. С использованием результатов SARA-анализа сырую нефть разделили на пять псевдокомпонентов. Показатели растворимости были рассчитаны по уравнению Редлиха-Квонга с поправками Соаве, состав компонентов - по уравнению Рэшфорда Райса. Также был использован генетический алгоритм для большей точности определения температуры начала кристаллизации парафинов и массы парафинов. Среднее отклонение температуры начала кристаллизации парафинов составило 0.11% и 0.15% для моделей многокомпонентного твердого раствора и твердого раствора соответственно. Среднее отклонение массы парафинов составило 10.32% и 5.8% в моделях растворов соответственно. Результаты показали, что более точно спрогнозировать осаждение парафинов в трубопроводах можно в модели твердого раствора, чем в модели многокомпонентного твердого раствора. Оптимизированные параметры модели твердого раствора были более эффективными и оказывали динамическое воздействие...
- 24 December 2021
- Published by Pleiades Publishing Ltd in Петролеомика
- Vol. 1 (1) , 116-126
Экспериментальное исследование и моделирование осаждения парафинов в трубопроводах, основанное на анализе содержания асфальтенов в нефти
Предлагается новая модель осаждения парафинов. Летучесть твердой фазы была рассчитана косвенным путем, исходя из летучести беспримесной жидкой фазы. С использованием результатов SARA-анализа сырую нефть разделили на пять псевдокомпонентов. Показатели растворимости были рассчитаны по уравнению Редлиха-Квонга с поправками Соаве, состав компонентов - по уравнению Рэшфорда Райса. Также был использован генетический алгоритм для большей точности определения температуры начала кристаллизации парафинов и массы парафинов. Среднее отклонение температуры начала кристаллизации парафинов составило 0.11% и 0.15% для моделей многокомпонентного твердого раствора и твердого раствора соответственно. Среднее отклонение массы парафинов составило 10.32% и 5.8% в моделях растворов соответственно. Результаты показали, что более точно спрогнозировать осаждение парафинов в трубопроводах можно в модели твердого раствора, чем в модели многокомпонентного твердого раствора. Оптимизированные параметры модели твердого раствора были более эффективными и оказывали динамическое воздействие...
- 15 December 2020
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 61 (5) , 631-639
A New Experimental and Modeling Investigation of Wax Precipitation in Pipelines Based on Asphaltene Content
In this paper, a new model is proposed for wax precipitation. Fugacity of the solid phase is calculated indirectly by considering the fugacity of the pure liquid phase. In this approach, crude oil is divided into five pseudo components using the SARA test results. Solubility parameters were calculated by SRK (Soave Modification of Redlich Kwong) equation of state, and the composition of components is calculated by employing Rachford Rice equation. Also, geneticalgorithm was used to improve the accuracy of results in WAT and wax weight. The average deviation of WAT (Wax Appearance Temperature) was 0.11 and 0.15% in the multi solid and solid solution models respectively, also the average deviation of the wax weight was 10.32 and 5.8% in the multi solid and solid solution models, respectively. The results showed that the solid solution model was more accurate in the prediction of wax precipitation in pipelines, as compared to the multi solid model. The optimized parameters in this solid solution model were more effective and had a dynamic influence. The multi solid and solid solution models had a remarkable accuracy with the experimental data. There was no logical explanation for asphaltene on wax precipitation and WAT. As a result, asphaltene was omitted in five crude oils in order to investigate the effect on the wax weight percentage and WAT. Results reveal that after omitting asphaltene, WAT and wax weight percentage were decreased.
- 15 December 2020
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 61 (5) , 631-639
A New Experimental and Modeling Investigation of Wax Precipitation in Pipelines Based on Asphaltene Content
In this paper, a new model is proposed for wax precipitation. Fugacity of the solid phase is calculated indirectly by considering the fugacity of the pure liquid phase. In this approach, crude oil is divided into five pseudo components using the SARA test results. Solubility parameters were calculated by SRK (Soave Modification of Redlich Kwong) equation of state, and the composition of components is calculated by employing Rachford Rice equation. Also, geneticalgorithm was used to improve the accuracy of results in WAT and wax weight. The average deviation of WAT (Wax Appearance Temperature) was 0.11 and 0.15% in the multi solid and solid solution models respectively, also the average deviation of the wax weight was 10.32 and 5.8% in the multi solid and solid solution models, respectively. The results showed that the solid solution model was more accurate in the prediction of wax precipitation in pipelines, as compared to the multi solid model. The optimized parameters in this solid solution model were more effective and had a dynamic influence. The multi solid and solid solution models had a remarkable accuracy with the experimental data. There was no logical explanation for asphaltene on wax precipitation and WAT. As a result, asphaltene was omitted in five crude oils in order to investigate the effect on the wax weight percentage and WAT. Results reveal that after omitting asphaltene, WAT and wax weight percentage were decreased.
- Open Access
- 1 December 2019
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 36 (4) , 1601-1612
A NEW COMPUTATIONAL FLUID DYNAMICS STUDY OF A LIQUID-LIQUID HYDROCYCLONE IN THE TWO PHASE CASE FOR SEPARATION OF OIL DROPLETS AND WATER
A liquid-liquid hydrocyclone, so-called de-oiling equipment, was investigated for separation of oil droplets and wastewater in an Iranian petroleum unit. To generate the geometry and the mesh of the hydrocyclone Gambit software was used. Afterwards, by taking advantage of the Euler-Lagrangian principle, the governing equations covering the motion of fluid and that of particles in the hydrocyclone were solved. Initially, it was shown that the outcomes of CFD are in agreement with experimental data, and then 15 hydrocyclones with different overflow diameters, overflow lengths and input velocities were employed for more detailed analyses. The separation process through a hydrocyclone is counted as an economical process when ther is not only a low pressure drop inside the hydrocyclone, but also a high separation efficiency. As a result, regarding the mentioned criteria, the optimum hydrocyclone, whereby the highest performance of the hydrocyclone is exploited, was obtained by applying the 15 sets of CFD data to a Neural Network (NN) and then by optimizing the function generated by the NN by means of a Genetic Algorithm (GA). The innovation of this research work is the three-phase modeling.
- 1 December 2019
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 36 (4) , 1601-1612
Open AccessA NEW COMPUTATIONAL FLUID DYNAMICS STUDY OF A LIQUID-LIQUID HYDROCYCLONE IN THE TWO PHASE CASE FOR SEPARATION OF OIL DROPLETS AND WATER
A liquid-liquid hydrocyclone, so-called de-oiling equipment, was investigated for separation of oil droplets and wastewater in an Iranian petroleum unit. To generate the geometry and the mesh of the hydrocyclone Gambit software was used. Afterwards, by taking advantage of the Euler-Lagrangian principle, the governing equations covering the motion of fluid and that of particles in the hydrocyclone were solved. Initially, it was shown that the outcomes of CFD are in agreement with experimental data, and then 15 hydrocyclones with different overflow diameters, overflow lengths and input velocities were employed for more detailed analyses. The separation process through a hydrocyclone is counted as an economical process when ther is not only a low pressure drop inside the hydrocyclone, but also a high separation efficiency. As a result, regarding the mentioned criteria, the optimum hydrocyclone, whereby the highest performance of the hydrocyclone is exploited, was obtained by applying the 15 sets of CFD data to a Neural Network (NN) and then by optimizing the function generated by the NN by means of a Genetic Algorithm (GA). The innovation of this research work is the three-phase modeling.
- 6 September 2019
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 33 (10) , 9466-9479
Experimental Investigation and Thermodynamic Modeling of Wax Precipitation in Crude Oil Using the Multi-Solid Model and PC-SAFT EOS
- 6 September 2019
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 33 (10) , 9466-9479
Experimental Investigation and Thermodynamic Modeling of Wax Precipitation in Crude Oil Using the Multi-Solid Model and PC-SAFT EOS
- Open Access
- 7 January 2019
- Published by KEAI Publishing in Petroleum Research
- Vol. 4 (2) , 173-180
Development of minimum tie line length method for determination of minimum miscible pressure in gas injection process
Gas injection process is a very important technology in enhanced oil recovery. Minimum miscible pressure is one of the key parameters in gas injection processes. Various experimental methods such as slim tube are used to measure MMP. These methods are costly and time consuming. Recently computational methods are used in order to achieve a cost-effective and reliable technique to evaluate MMP. In this work, a new methodology has been proposed for determination of MMP using the minimum tie line length method. A real mixing cell model was developed to estimate the MMP, MME and key tie lines. This method is simple, robust, and faster than conventional one-dimensional simulation of slim tube. The new mixing cells method can accurately determine the whole key tie lines to a shift, regardless of the number of injection gas and reservoir fluid components. Unlike other methods of mixing cells, this method automatically corrects dispersion by additional contacts to achieve the low variation domain of tie line slope. Also, the determination and implementation of the minimum miscibility enrichment are investigated.
- 7 January 2019
- Published by KEAI Publishing in Petroleum Research
- Vol. 4 (2) , 173-180
Open AccessDevelopment of minimum tie line length method for determination of minimum miscible pressure in gas injection process
Gas injection process is a very important technology in enhanced oil recovery. Minimum miscible pressure is one of the key parameters in gas injection processes. Various experimental methods such as slim tube are used to measure MMP. These methods are costly and time consuming. Recently computational methods are used in order to achieve a cost-effective and reliable technique to evaluate MMP. In this work, a new methodology has been proposed for determination of MMP using the minimum tie line length method. A real mixing cell model was developed to estimate the MMP, MME and key tie lines. This method is simple, robust, and faster than conventional one-dimensional simulation of slim tube. The new mixing cells method can accurately determine the whole key tie lines to a shift, regardless of the number of injection gas and reservoir fluid components. Unlike other methods of mixing cells, this method automatically corrects dispersion by additional contacts to achieve the low variation domain of tie line slope. Also, the determination and implementation of the minimum miscibility enrichment are investigated.
- 17 July 2018
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 58 (8) , 622-629
A New Investigation on Asphaltene Precipitation: Experimental and a New Thermodynamic Approach
The process of asphaltene precipitation has a substantial effect on oil production in petroleum industry. In this work, a series of experiments was carried to determine the asphaltene precipitation...
- 17 July 2018
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 58 (8) , 622-629
A New Investigation on Asphaltene Precipitation: Experimental and a New Thermodynamic Approach
The process of asphaltene precipitation has a substantial effect on oil production in petroleum industry. In this work, a series of experiments was carried to determine the asphaltene precipitation...