Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nick Tucker has a total of 129 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Electro–Thermal Ageing of Polymer–Ceramic Nanocomposite Insulation on Dielectric Endurance

    by Keyvan Rasti, Sathyamoorthy Dhayalan, Nick Tucker, Len Dissado, Nikola Chalashkanov

    This study investigates the electro-thermal ageing (ETA) behaviour of neat polyamide-6 (PA6) and PA6/barium titanate (BTO) nanocomposites. Time–to–breakdown measurements were performed at 333 K, 353 K, and 373 K at field strengths between 50 and 90 kV/mm to assess the impact of nanofiller level on lifetime to failure. The ageing experiment showed that moderate amounts of nanofiller improved the electro-thermal endurance while excessive filler addition (20 wt.%) led to faster breakdown. The Dissado–Montanari–Mazzanti (DMM) model was used to evaluate the ageing parameters for neat PA6 and PA6/10 wt.% BTO across all three temperatures. Neat PA6 and PA6/10 wt.% BTO both showed nearly identical activation enthalpy (H/k) values, indicating that the intrinsic thermally activated ageing mechanism of PA6 is preserved in the nanocomposite. Variations in the field-sensitivity parameters (C/k and b) align with an interpretation involving changes in charge transport and interfacial trapping introduced by the addition of BTO. Furthermore, analysis of all filler concentrations confirmed that 1–10 wt.% BTO maintains or slightly improves the time to breakdown, while 20 wt.% significantly accelerated the ageing process. This research forms part of the research programme of DPI, project #852.

  • The Development of Electrospinning Technologies for Commercial Application

    by Geoffrey R. Mitchell, Nick Tucker, Saravana Jaganathan

    In common with most technological advances, electrospinning was not devised in a few years as the result of direction provided by the clear demands from business to the research community. Scientists, engineers, and entrepreneurs worked independently towards the general, and sometimes overlapping, aims of advancing knowledge and making money. The work undertaken by these savants and industrialists provided both theoretical and practical underpinnings for the process. At the end of the nineteenth century, both the technological ingredients (high-voltage power supplies and soluble polymers) and the commercial drivers (the potential of the emerging artificial fibres industry) were in place to allow the invention of the process to take place. Currently, there are at least 18 countries with practicing electrospinning companies. The machine market sectors addressed by these companies vary in scope from the manufacture of laboratory-scale machines aimed at the research market through to full-scale production lines. The materials market sectors range from small-volume high-cost medical materials to the commodity materials for filtration and cosmetic use. To examine the current state of technological play we provide a sample of companies currently either making electrospinning machines or electrospun products.

  • Top Cited Papers
    Open Access

    Artificial Intelligence Applications in Medical Devices for Personalized Health Care Solutions: Systematic Review

    by Hemanth Ponnambalath Mohanadas, A Manikandan, Ahmad Fauzi Ismail, Nick Tucker, Saravana Kumar Jaganathan

    Background: The integration of artificial intelligence (AI) in medical devices is transforming health care by enabling enhanced personalization and precision medicine. AI-driven medical devices can tailor treatments based on individual patient profiles, including genetic data, medical history, and physiological parameters. This advancement holds the potential to refine therapeutic interventions, improve patient outcomes, and streamline health care delivery. However, challenges such as data quality, algorithmic bias, patient privacy, and regulatory complexities hinder the full realization of AI-driven personalization. By 2030, the global AI in health care market is projected to exceed US $187.95 billion, growing at a compound annual growth rate of 37% from US $15.1 billion in 2022. Objective: This review aims to explore the scope and impact of AI-driven personalization in medical devices. It seeks to analyze key technological innovations that have enabled AI integration, identify the critical challenges impeding progress, and evaluate strategies to address these challenges. Additionally, it highlights future research directions and innovation opportunities in this evolving field. Methods: A systematic review was conducted, drawing from scholarly literature, industry analyses, and regulatory advisories. Relevant studies and case examples were analyzed to assess the current applications of AI in medical devices, the barriers to its implementation, and best practices for overcoming these barriers. Ethical, technical, and regulatory considerations were also examined. The review included studies published between 2016 and 2023, covering over 100 peer-reviewed articles and reports. Results: The review highlights significant advancements in AI-driven medical devices, including applications in diagnostics, treatment personalization, wearable health monitoring, and smart prosthetics. AI-based diagnostic tools have achieved up to 98.88% accuracy in multiclass disease classification from X-ray images and 95% accuracy in insulin injection site recognition. It identifies key challenges such as data security risks, algorithmic biases, regulatory constraints, and integration issues with existing health care infrastructures. Currently, more than 70% of clinical decisions rely on diagnostic tests, yet AI-driven automation could reduce diagnostic delays by up to 50%. Several strategies, including improved data validation techniques, regulatory frameworks for AI approval, and ethical guidelines, were found to be effective in mitigating these challenges. Case studies demonstrate how AI has enhanced medical device functionality and patient outcomes. Conclusions: AI-driven personalization in medical devices holds immense potential to revolutionize health care, offering more precise, adaptive, and patient-centered solutions. However, successful implementation requires addressing technical, ethical, and regulatory challenges. Emerging technologies such as quantum computing could improve AI-driven medical diagnoses by 10‐20 times in processing efficiency, while blockchain-based patient data management could reduce security breaches by more than 30%. This review serves as a valuable resource for researchers, health care professionals, policymakers, and industry leaders, fostering informed discussions and guiding future advancements in AI-enabled personalized medicine.


  • Open Access

    Investigating the voltaic efficiency of 3D-printed macro-patterned electrodes for hydrogen evolution reactions in water electrolysis

    by Mahmoud Saleh Shahreza, Brandon Harvey, Ibrahim M. Albayati, Eni Oko, Archibong Archibong-Eso, Nick Tucker, Pouriya Niknam, Aliyu Aliyu


  • Open Access

    Electrospun nanocomposite polyurethane scaffolds: The synergistic effect of onion and copper sulphate for enhanced bone tissue engineering applications

    by Mohan Prasath Mani, Hemanth Ponnambalath Mohanadas, Manikandan Ayyar, Nick Tucker, Saravana Kumar Jaganathan


  • Open Access

    Physicochemical Properties of Runner Bean and Their Starch, With a Comparison to Corn Starch

    by Folasade E. Akinwumi, Bukola A. Onarinde, Sumit Konar, Nick Tucker, Samson A. Oyeyinka

    The growing demand for sustainable and plant‐based ingredients in the food and non‐food industries has driven interest in alternative starch and protein sources. Runner beans, a lesser known legume, offer a promising but underexplored source of starch with unique functional properties. This study aims to evaluate the physical, physicochemical, and functional properties of starch from two distinct varieties of runner beans (Scarlet Emperor and White Swan), which exhibit notable phenotypic differences in appearance. Corn starch was included as a reference sample for starch isolates. Scarlet Emperor starch exhibited significant differences in amylose, amylopectin, relative crystallinity, pasting, and flow properties but similar crystallinity (C‐type), oil absorption capacity compared to White Swan starch. Both starches also differed significantly from the corn starch control in terms of functional, pasting, and rheological properties. Extracted starches were pure with high starch content (∼96%), high lightness value (∼94) but different amylose content, 28.38 for White Swan and 30.89% for Scarlet Emperor compared to corn starch (29.67%). Both runner bean starches were smooth, bigger, and displayed higher viscosity and firmer gels than the corn starch control. These findings suggest that runner bean starch can complement with corn starch, providing better thickening capacity in food systems.


  • Open Access

    Hydrogen Storage Vessel for a Proton-Exchange Membrane (PEM) Fuel Cell Auxiliary Power Unit for Commercial Aircraft

    by Anto Nickhil Antony Ramesh, Aliyu M. Aliyu, Nick Tucker, Ibrahim M. Albayati

    Approximately 20% of emissions from air travel are attributed to the auxiliary power units (APUs) carried in commercial aircraft. This paper proposes to reduce greenhouse gas emissions in international air transport by adopting proton-exchange membrane (PEM) fuel cells to replace APUs in commercial aircraft: we consider the design of three compressed hydrogen storage vessels made of 304 stainless steel, 6061-T6 aluminium, and Grade 5 (Ti-6Al-4V) titanium and capable of delivering 440 kW—enough for a PEM fuel cell for a Boeing 777. Complete structural analyses for pressures from 35 MPa to 70 MPa and wall thicknesses of 25, 50, 100, and 150 mm are used to determine the optimal material for aviation applications. Key factors such as deformation, safety factors, and Von Mises equivalent stress are evaluated to ensure structural integrity under a range of operating conditions. In addition, CO2 emissions from a conventional 440 kW gas turbine APU and an equivalent PEM fuel cell are compared. This study provides insights into optimal material selection for compressed hydrogen storage vessels, emphasising safety, reliability, cost, and weight reduction. Ultimately, this research aims to facilitate the adoption of fuel cell technology in aviation, contributing to greenhouse emissions reduction and hence sustainable air transport.


  • Open Access

    Advancements in textile techniques for cardiovascular tissue replacement and repair

    by Abiola Bakare, Hemanth Ponnambalath Mohanadas, Nick Tucker, Waqar Ahmed, A. Manikandan, Ahmad Athif Mohd Faudzi, Shahrol Mohamaddan, Saravana Kumar Jaganathan

    In cardiovascular therapeutics, procedures such as heart transplants and coronary artery bypass graft are pivotal. However, an acute shortage of organ donors increases waiting times of patients, which is reflected in negative effects on the outcome for the patient. Post-procedural complications such as thrombotic events and atherosclerotic developments may also have grave clinical implications. To address these challenges, tissue engineering is emerging as a solution, using textile technologies to synthesize biomimetic scaffolds resembling natural tissues. This comprehensive analysis explains methodologies including electrospinning, electrostatic flocking, and advanced textile techniques developed from weaving, knitting, and braiding. These techniques are evaluated in the context of fabricating cardiac patches, vascular graft constructs, stent designs, and state-of-the-art wearable sensors. We also closely examine the interaction of distinct process parameters with the biomechanical and morphological attributes of the resultant scaffolds. The research concludes by combining current findings and recommendations for subsequent investigation.


  • Open Access

    Preparation, design, and characterization of an electrospun polyurethane/calcium chloride nanocomposite scaffold with improved properties for skin tissue regeneration

    by Mohan Prasath Mani, Hemanth Ponnambalath Mohanadas, Ahmad Athif Mohd Faudzi, Ahmad Fauzi Ismail, Nick Tucker, Shahrol Mohamaddan, Suresh K Verma, Saravana Kumar Jaganathan

    The present research paper explores the potential of electrospun nanofibers in the promising field of skin tissue engineering. Specifically, we propose an advanced preparation and characterization of an electrospun Polyurethane/Calcium Chloride (PU/CaCl2) nanocomposite scaffold, devised to boost the scaffold’s physicochemical and biological properties for skin tissue regeneration. By incorporating CaCl2 into the PU matrix using an electrospinning process, we were able to fabricate a novel nanocomposite scaffold. The morphological examination through Field Emission Scanning Electron Microscope (FESEM) revealed that the fiber diameter of the PU/CaCl2 (563 ± 147 nm) scaffold was notably smaller compared to the control (784 ± 149 nm). The presence of CaCl2 in the PU matrix was corroborated by Fourier-Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). Furthermore, the PU/CaCl2 scaffold exhibited superior tensile strength (10.81 MPa) over pristine PU (Tensile −6.16 MPa, Contact angle - 109° ± 1° and Roughness - 854 ± 32 nm) and revealed enhanced wettability (72° ± 2°) and reduced surface roughness (274 ± 104 nm), as verified by Contact angle and Atomic Force Microscopy. The developed scaffold demonstrated improved anticoagulant properties, indicating its potential for successful integration within a biological environment. The improved properties of the PU/CaCl2 nanocomposite scaffold present a significant advancement in electrospun polymer nanofibers, offering a potential breakthrough in skin tissue engineering. However, additional studies are required to thoroughly evaluate the scaffold’s effectiveness in promoting cell adhesion, proliferation, and differentiation. We aim to catalyze significant advancements in the field by revealing the creation of a potent skin scaffold leveraging electrospun nanofibers. Encouraging deeper exploration into this innovative electrospun composite scaffold for skin tissue engineering, the PU/CaCl2 scaffold stands as a promising foundation for pioneering more innovative, efficient, and sustainable solutions in biomedical applications.


  • Open Access

    Effects of Nano-Bentonite Polypropylene Nanocomposite Films and Modified Atmosphere Packaging on the Shelf Life of Fresh-Cut Iceberg Lettuce

    by Zeynab Farahanian, Nafiseh Zamindar, Gulden Goksen, Nick Tucker, Saeed Paidari, Elham Khosravi

    In this study, the shelf life of fresh-cut iceberg lettuce (Lactuca sativa L.) was evaluated. Lettuce samples were washed with disinfectant agents and sodium hypochlorite and then soaked in an ascorbic acid solution. Next, samples were stored in packaging films containing three levels (1% and 3% and 0% as a control film) of nano-bentonite particles (NBPs) as a filler in a modified atmosphere for 12 days at 4 °C. Various physicochemical parameters such as color, texture, pH, titratable acidity, dehydration, moisture, dry matter, chlorophyll content, microbial quality, and sensory properties were investigated. Results indicated that nano-packaging had a significant ability to maintain the sensory physicochemical properties of lettuce at the fifth (1% nano-composite film) and ninth (3% nano-composite film) days of storage when compared to the control films. The greatest growths of molds and yeasts were observed in the control films, which demonstrates the effectiveness of the application of bentonite nanoparticle fillers.