LBLaura Robin Benedetti

Laura Robin Benedetti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Laura Robin Benedetti has a total of 458 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Affordable, manageable, practical, and scalable (AMPS) high-yield and high-gain inertial fusion

    by Andrew Alexander, Laura Robin Benedetti, Indrani Bhattacharyya, Jared Bowen, June Cabatu, Virgil Cacdac, Chhavi Chhavi, Chiatai Chen, Karen Chen, Dan Clark, et al.

    High-yield inertial fusion offers a transformative path to affordable, clean, firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We propose that pulser-driven inertial fusion energy (IFE), which uses high-current pulsed-power technology to compress targets to thermonuclear conditions, can achieve this goal. In this paper, we detail the physics basis for pulser IFE, focusing on magnetized liner inertial fusion, where cylindrical metal liners compress DT fuel under strong magnetic fields and preheat. We discuss how the low implosion velocities, direct-drive efficiency, and scalable pulser architecture can achieve ignition-level conditions at low capital cost. Our multi-dimensional simulations, benchmarked against experiments at the Z facility, show that scaling from 20 to 50–60 MA of current enables net facility gain. We then introduce our Demonstration System (DS), a pulsed-power driver designed to deliver more than 60 MA and store approximately 80 MJ of energy. The DS is designed to achieve a 1000× increase in effective performance compared to the NIF, delivering approximately 100× greater facility-level energy gain—and importantly, achieving net facility gain, or Qf>1—at just 1/10 the capital cost. We also examine the engineering requirements for repetitive operation, target fabrication, and chamber maintenance, highlighting a practical roadmap to commercial power plants.


  • Optimization of VISAR Mirrors for NIF Targets

    by Neal Bhandarkar, Anastacia M. Manuel, Peter Celliers, Laura Robin Benedetti, Kalpani Werellapatha, Martin Gorman, Cara Vennari, Nathan E. Palmer, Yong-Jae Kim, John Chesser, et al.

  • Multiframe X-ray diffraction on the OMEGA EP laser

    by D. N. Polsin, J. R. Rygg, D. T. Bishel, D. A. Chin, F. Coppari, X. Gong, S. T. Ivancic, S. P. Regan, K. Werellapatha, G. W. Collins, et al.

    A method of measuring multiple temporally resolved powder x-ray diffraction measurements during a single dynamic compression laser experiment has been demonstrated on the OMEGA EP laser. Up to four time-gated snapshots of the x-ray diffraction pattern are collected on an ultrafast x-ray framing camera with a 2θ scattering angle coverage of 48°–65° and 400-ps temporal resolution with the potential for 10°–160° and 200-ps resolution. X-ray diffraction snapshots capture the transformation to a high-pressure β phase in ramp-compressed Zr, constraining the atomic structure and pressure–density equation-of-state in a single shot. This platform will be used to constrain transition pressures, understand the role of kinetics, and verify the existence of hysteresis and metastability on phase transformations at the lattice level under single-shot dynamic compression.


  • Identifying, quantifying, and mitigating background with the time-resolved x-ray diffraction platform at the National Ignition Facility

    by L. R. Benedetti, N. E. Palmer, C. E. Vennari, P. R. Nyholm, J. H. Eggert, A. C. Carpenter, N. Bhandarkar, D. K. Bradley, A. J. MacKinnon, S. R. Nagel, et al.

    The time-resolved x-ray diffraction platform at the National Ignition Facility (NIF) fields electronic sensors closer to the exploding laser-driven target than any other NIF diagnostic in order to directly detect diffracted x rays from highly compressed materials. We document strategies to characterize and mitigate the unacceptably high background signals observed in this geometry. We specifically assess the possible effects of electromagnetic pulse, x-ray fluorescence, hot electrons, and sensor-specific non-x-ray artifacts. Significant background reduction is achieved by strategic shielding.


  • Time resolved x-ray diffraction using the flexible imaging diffraction diagnostic for laser experiments (FIDDLE) at the National Ignition Facility (NIF): Preliminary assessment of diffraction precision

    by C. E. Vennari, N. E. Palmer, P. R. Nyholm, N. S. Bhandakar, S. R. Nagel, R. B. Petre, C. V. Stan, J. H. Eggert, D. K. Bradley, Y. Ping, et al.

    The Flexible Imaging Diffraction Diagnostic for Laser Experiments (FIDDLE) is a new diagnostic at the National Ignition Facility (NIF) designed to observe in situ solid–solid phase changes at high pressures using time resolved x-ray diffraction. FIDDLE currently incorporates five Icarus ultrafast x-ray imager sensors that take 2 ns snapshots and can be tuned to collect X-rays for tens of ns. The platform utilizes the laser power at NIF for both the laser drive and the generation of 10 keV X-rays for ∼10 ns using a Ge backlighter foil. We aim to use FIDDLE to observe diffraction at different times during compression to probe the kinetics of phase changes. Pb undergoes two solid–solid phase transitions during ramp compression: from face centered cubic (FCC) to hexagonal close packed (HCP) and HCP to body centered cubic (BCC). Results will be reported on some of the first shots using the FIDDLE diagnostic at NIF on ramp compressed Pb to a peak pressure of ∼110 GPa and a single undriven CeO2 calibration shot. A discussion of the uncertainties in the observed diffraction is included.


  • Developing time-resolved x-ray diffraction diagnostics at the National Ignition Facility (invited)

    by N. E. Palmer, L. R. Benedetti, C. E. Vennari, P. R. Nyholm, R. B. Petre, N. Bhandarkar, A. C. Carpenter, S. R. Nagel, J. H. Eggert, D. K. Bradley, et al.

    As part of a program to measure phase transition timescales in materials under dynamic compression, we have designed new x-ray imaging diagnostics to record multiple x-ray diffraction measurements during a single laser-driven experiment. Our design places several ns-gated hybrid CMOS (hCMOS) sensors within a few cm of a laser-driven target. The sensors must be protected from an extremely harsh environment, including debris, electromagnetic pulses, and unconverted laser light. Another key challenge is reducing the x-ray background relative to the faint diffraction signal. Building on the success of our predecessor (Target Diffraction In Situ), we implemented a staged approach to platform development. First, we built a demonstration diagnostic (Gated Diffraction Development Diagnostic) with two hCMOS sensors to confirm we could adequately protect them from the harsh environment and also acquire acceptable diffraction data. This allowed the team to quickly assess the risks and address the most significant challenges. We also collected scientifically useful data during development. Leveraging what we learned, we recently developed a much more ambitious instrument (Flexible Imaging Diffraction Diagnostic for Laser Experiments) that can field up to eight hCMOS sensors in a flexible geometry and participate in back-to-back shots at the National Ignition Facility (NIF). The design also allows for future iterations, such as faster hCMOS sensors and an embedded x-ray streak camera. The enhanced capabilities of the new instrument required a much more complex design, and the unexpected issues encountered on the first few shots at NIF remind us that complexity has consequences. Our progress in addressing these challenges is described herein, as is our current focus on improving data quality by reducing x-ray background and quantifying the uncertainties of our diffraction measurements.


  • Electrical design of the flexible imaging diffraction diagnostic for laser experiments (FIDDLE) at the National Ignition Facility (NIF)—Requirements, design, and performance

    by P. R. Nyholm, N. E. Palmer, R. B. Petre, A. C. Carpenter, S. R. Nagel, D. K. Bradley, C. E. Vennari, B. Golick, D. Boyle, A. M. Sharp, et al.

    The Flexible Imaging Diffraction Diagnostic for Laser Experiments (FIDDLE) is a newly developed diagnostic for imaging time resolved diffraction in experiments at the National Ignition Facility (NIF). It builds on the successes of its predecessor, the Gated Diffraction Development Diagnostic (G3D). The FIDDLE was designed to support eight Daedalus version 2 sensors (six more hCMOS sensors than any other hCMOS-based diagnostic in NIF to date) and an integrated streak camera. We will review the electrical requirements, design, and performance of the electrical subsystems that were created to support this large number of cameras in the FIDDLE. The analysis of the data that the FIDDLE is intended to collect relies heavily on the accurate and well-understood timing of each sensor. We report camera-to-camera timing jitter of less than 100 ps rms and sensor integration times of 2.2 ns FWHM in 2-2 timing mode. Additionally, diffraction experiments on the NIF produce electric fields (EMI) on the order of 1 kV/m, which have been observed to negatively impact the performance of some electrical components of the FIDDLE. We report on the results of testing hCMOS camera electronics in a similar EMI environment generated in an offline lab. We also summarize the use of a novel approach to using a vector network analyzer as an EMI leak detector to understand and reduce the negative impacts of EMI on the FIDDLE.


  • Open Access

    Time-resolved X-ray diffraction diagnostic development for the National Ignition Facility

    by K. Werellapatha, N. E. Palmer, M. G. Gorman, J. V. Bernier, N. S. Bhandarkar, D. K. Bradley, D. G. Braun, M. Bruhn, A. Carpenter, P. M. Celliers, et al.

    We present the development of an experimental platform that can collect four frames of x-ray diffraction data along a single line of sight during laser-driven, dynamic-compression experiments at the National Ignition Facility. The platform is comprised of a diagnostic imager built around ultrafast sensors with a 2-ns integration time, a custom target assembly that serves also to shield the imager, and a 10-ns duration, quasi-monochromatic x-ray source produced by laser-generated plasma. We demonstrate the performance with diffraction data for Pb ramp compressed to 150 GPa and illuminated by a Ge x-ray source that produces ∼7 × 1011, 10.25-keV photons/ns at the 400 μm diameter sample.


  • Open Access

    Analysis and mitigation of an oscillating background on hybrid complementary metal-oxide semiconductor (hCMOS) imaging sensors at the National Ignition Facility

    by B. R. Hassard, M. S. Dayton, C. Trosseille, L. R. Benedetti, H. Chen, T. Döppner, C. E. Durand, G. N. Hall, S. B. Morioka, P. R. Nyholm, et al.

    Nanosecond-gated hybrid complementary metal-oxide semiconductor imaging sensors are a powerful tool for temporally gated and spatially resolved measurements in high energy density science, including inertial confinement fusion, and in laser diagnostics. However, a significant oscillating background excited by photocurrent has been observed in image sequences during testing and in experiments at the National Ignition Facility (NIF). Characterization measurements and simulation results are used to explain the oscillations as the convolution of the pixel-level sensor response with a sensor-wide RLC circuit ringing. Data correction techniques are discussed for NIF diagnostics, and for diagnostics where these techniques cannot be used, a proof-of-principle image correction algorithm is presented.


  • Reaching a burning plasma and ignition using smaller capsules/Hohlraums, higher radiation temperatures, and thicker ablator/ice on the national ignition facility

    by K. L. Baker, C. A. Thomas, O. L. Landen, S. Haan, J. D. Lindl, D. T. Casey, C. Young, R. Nora, O. A. Hurricane, D. A. Callahan, et al.

    In indirect-drive implosions, the final core hot spot energy and pressure and, hence, neutron yield attainable in 1D increase with increasing laser peak power and, hence, radiation drive temperature at the fixed capsule and Hohlraum size. We present simple analytic scalings validated by 1D simulations that quantify the improvement in performance and use this to explain existing data and simulation trends. Extrapolating to the 500 TW National Ignition Facility peak power limit in a low gas-fill 5.4 mm diameter Hohlraum based on existing high adiabat implosion data at 400 TW, 1.3 MJ and 1 × 1016 yield, we find that a 2–3 × 1017 yield (0.5–0.7 MJ) is plausible using only 1.8 MJ of laser energy. Based on existing data varying deuterium–tritium (DT) fuel thickness and dopant areal density, further improvements should be possible by increasing DT fuel areal density, and hence confinement time and yield amplification.