Lusheng Zhai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lusheng Zhai has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Ningde Jin
Tianjin University
25 shared publications - Yingyu Ren
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
8 shared publications - Hongxin Zhang
School of Electrical and Information Engineering, Tianjin University, Tianjin 300072, China
5 shared publications - Jie Yang
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
5 shared publications - Dayang Wang
College of Information Science and Engineering, Northeastern University, Shenyang, China
4 shared publications - Xinyu Meng
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
4 shared publications
Latest Publications
- Open Access
Complexity of Horizontal Oil–Gas–Water Flows in Deepwater Simulation Well: Insights from Multiscale Phase Permutation Entropy Analysis
Deepwater oil–gas–water three-phase flow is widely regarded as a multiphase system. Intense interfacial interactions cause significant nonuniform fluid distributions in the wellbore, giving rise to complex nonlinear dynamics. In this study, a distributed conductance sensor (DCS) was developed to capture local flow information from a horizontal oil–gas–water simulation well. To quantify the complexity of nonlinear time series, phase permutation entropy (PPE) was first validated using artificial data, including the Tent map, Hénon map, and Lorenz system. PPE demonstrates superior capability in detecting abnormal dynamical changes compared with permutation entropy (PE). Subsequently, PPE is combined with the multiscale approach, i.e., multiscale phase permutation entropy (MPPE), to analyze the DCS signals and uncover the complexity of horizontal oil–gas–water flows. The results show that the MPPE analysis can reveal the spatial distribution characteristics of elongated gas bubbles, gas paths, dispersed bubbles and oil droplets.
Open AccessComplexity of Horizontal Oil–Gas–Water Flows in Deepwater Simulation Well: Insights from Multiscale Phase Permutation Entropy Analysis
Deepwater oil–gas–water three-phase flow is widely regarded as a multiphase system. Intense interfacial interactions cause significant nonuniform fluid distributions in the wellbore, giving rise to complex nonlinear dynamics. In this study, a distributed conductance sensor (DCS) was developed to capture local flow information from a horizontal oil–gas–water simulation well. To quantify the complexity of nonlinear time series, phase permutation entropy (PPE) was first validated using artificial data, including the Tent map, Hénon map, and Lorenz system. PPE demonstrates superior capability in detecting abnormal dynamical changes compared with permutation entropy (PE). Subsequently, PPE is combined with the multiscale approach, i.e., multiscale phase permutation entropy (MPPE), to analyze the DCS signals and uncover the complexity of horizontal oil–gas–water flows. The results show that the MPPE analysis can reveal the spatial distribution characteristics of elongated gas bubbles, gas paths, dispersed bubbles and oil droplets.
- 6 December 2024
- Published by Elsevier in Measurement
- Vol. 243
Bubble-shape-based velocity measurement of horizontal gas–liquid two-phase flows using wire-mesh sensor
- 6 December 2024
- Published by Elsevier in Measurement
- Vol. 243
Bubble-shape-based velocity measurement of horizontal gas–liquid two-phase flows using wire-mesh sensor
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73  (00189456) , 1-13
Velocity Measurement of Gas–Liquid Slug Flows Using Multichannel Ultrasonic Doppler Sensor System
Horizontal gas-liquid slug flows are widely encountered in important industrial processes. Bubble velocity measurement is of great significance for understanding the heat/mass transfer and flow pattern transitions, and thus optimizing the industrial processes. Multiscale bubbles in slug flow are characterized by complicated interactions and thus exhibit intricate transient behaviors, making the velocity measurement exceedingly challenging. In this study, a multi-channel ultrasonic Doppler sensor (MCUDS) is proposed to measure the bubble velocities in gas-liquid slug flows. The MCUDS features region-focused characteristics and thus yields high sensitivity at different measurement depths. An FPGA-based measurement system is designed to generate pulse ultrasonic signals and implement rapid and stable data acquisition, processing, and transmission. A Taylor bubble tracking method based on the effective information ratio is proposed to measure the velocities of the nose and tail of Taylor bubbles. Doppler pulse repetition method (DPRM) with a sliding window is combined with the expanded autocorrelation (EAC) algorithm to derive the Doppler shift. The research results indicate that integrating a sliding window into the DPRM effectively improves the temporal resolution of bubble velocity measurements, thereby accurately constructing the spatiotemporal distribution of the velocity vectors of dispersed bubbles. This allows for the revelation of the complex motion processes of bubbles and the slug aeration characteristics under different gas-liquid flow conditions.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73  (00189456) , 1-13
Velocity Measurement of Gas–Liquid Slug Flows Using Multichannel Ultrasonic Doppler Sensor System
Horizontal gas-liquid slug flows are widely encountered in important industrial processes. Bubble velocity measurement is of great significance for understanding the heat/mass transfer and flow pattern transitions, and thus optimizing the industrial processes. Multiscale bubbles in slug flow are characterized by complicated interactions and thus exhibit intricate transient behaviors, making the velocity measurement exceedingly challenging. In this study, a multi-channel ultrasonic Doppler sensor (MCUDS) is proposed to measure the bubble velocities in gas-liquid slug flows. The MCUDS features region-focused characteristics and thus yields high sensitivity at different measurement depths. An FPGA-based measurement system is designed to generate pulse ultrasonic signals and implement rapid and stable data acquisition, processing, and transmission. A Taylor bubble tracking method based on the effective information ratio is proposed to measure the velocities of the nose and tail of Taylor bubbles. Doppler pulse repetition method (DPRM) with a sliding window is combined with the expanded autocorrelation (EAC) algorithm to derive the Doppler shift. The research results indicate that integrating a sliding window into the DPRM effectively improves the temporal resolution of bubble velocity measurements, thereby accurately constructing the spatiotemporal distribution of the velocity vectors of dispersed bubbles. This allows for the revelation of the complex motion processes of bubbles and the slug aeration characteristics under different gas-liquid flow conditions.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24  (3) , 2547-2557
Measurement of Gas Holdup in Slug Region of Horizontal Oil–Gas–Water Three-Phase Flow by a Distributed Ultrasonic Sensor
Oil-gas-water slug flow is the most common flow pattern in the horizontal pipe, which presents complex pseudo-periodic motion alternating between the film region and the slug region. The water in the slug region is a continuous phase, which is filled with non-uniformly distributed gas bubbles and oil droplets. Aim at measuring the gas holdup in the slug region, a distributed ultrasonic sensor (DUS) is developed which consists of one transmitter and three receivers A, B and C fixed at the pipe circumference. The measurement responses of the DUS and a wire-mesh sensor (WMS) are obtained in the experiment of horizontal oil-gas-water three-phase flow. Based on the flow visualizations of the WMS, bubble radii are extracted on 2D planes, and the relationship between average bubble size and the instantaneous gas holdup is derived. Thus, ultrasonic attenuation MCBL model is modified by considering the bubble size, absorption and scattering attenuation at the gas-liquid interface. According to the responses of receiver A, the modified MCBL model is used to measure the gas holdup at the pipe center. Besides, side receivers B and C provide complementary information about scattering off the gas bubbles in the ultrasonic path. Statistic models are constructed based on the responses of receivers B and C to measure the gas holdup at the side of the pipe cross-section. Generally, the DUS enables us to successfully measure the gas holdup in the slug region of the oil-gas-water slug flow.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24  (3) , 2547-2557
Measurement of Gas Holdup in Slug Region of Horizontal Oil–Gas–Water Three-Phase Flow by a Distributed Ultrasonic Sensor
Oil-gas-water slug flow is the most common flow pattern in the horizontal pipe, which presents complex pseudo-periodic motion alternating between the film region and the slug region. The water in the slug region is a continuous phase, which is filled with non-uniformly distributed gas bubbles and oil droplets. Aim at measuring the gas holdup in the slug region, a distributed ultrasonic sensor (DUS) is developed which consists of one transmitter and three receivers A, B and C fixed at the pipe circumference. The measurement responses of the DUS and a wire-mesh sensor (WMS) are obtained in the experiment of horizontal oil-gas-water three-phase flow. Based on the flow visualizations of the WMS, bubble radii are extracted on 2D planes, and the relationship between average bubble size and the instantaneous gas holdup is derived. Thus, ultrasonic attenuation MCBL model is modified by considering the bubble size, absorption and scattering attenuation at the gas-liquid interface. According to the responses of receiver A, the modified MCBL model is used to measure the gas holdup at the pipe center. Besides, side receivers B and C provide complementary information about scattering off the gas bubbles in the ultrasonic path. Statistic models are constructed based on the responses of receivers B and C to measure the gas holdup at the side of the pipe cross-section. Generally, the DUS enables us to successfully measure the gas holdup in the slug region of the oil-gas-water slug flow.
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23  (22) , 28012-28020
A Dual Mode Ultrasonic Method for Measuring Gas Volume Fraction in Two-Phase Slug Flows
The flow parameters measurement of gas-liquid slug flow acts a vital role in many industrial systems. Owing to intricate flow structure with gas slug and liquid slug alternately rising, the single mode sensor is challenging to precisely identify the dynamic characteristics of fluids. This paper introduces an ultrasonic dual mode sensor system combining transmissive ultrasonic sensor and reflective ultrasonic sensor, in which the reflective ultrasonic sensors are used to identify the gas volume fraction (GVF) of the gas slug, while the transmissive ultrasonic sensors monitor that in the liquid slug. Finally, a multi-sensor information fusion architecture is designed to predict the complete gas phase volume fraction of slug flow. A sensor electronic system based on FPGA is developed to ensure high speed and stable operation, which integrates the functions of analog front end, sensor control, high speed data acquisition and real-time signal transmissive. In addition, a physical model using the energy attenuation of ultrasonic which based on measurement results of gas bubble diameter obtained by fluid sampler is proposed to improve the gas phase volume fraction prediction accuracy of liquid slug. The experiment results show that the ultrasonic dual mode sensor can accurately measure the GVF of slug flow with complex flow structure, providing a new research method for industrial slug flow measurement.
- 16 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23  (22) , 28012-28020
A Dual Mode Ultrasonic Method for Measuring Gas Volume Fraction in Two-Phase Slug Flows
The flow parameters measurement of gas-liquid slug flow acts a vital role in many industrial systems. Owing to intricate flow structure with gas slug and liquid slug alternately rising, the single mode sensor is challenging to precisely identify the dynamic characteristics of fluids. This paper introduces an ultrasonic dual mode sensor system combining transmissive ultrasonic sensor and reflective ultrasonic sensor, in which the reflective ultrasonic sensors are used to identify the gas volume fraction (GVF) of the gas slug, while the transmissive ultrasonic sensors monitor that in the liquid slug. Finally, a multi-sensor information fusion architecture is designed to predict the complete gas phase volume fraction of slug flow. A sensor electronic system based on FPGA is developed to ensure high speed and stable operation, which integrates the functions of analog front end, sensor control, high speed data acquisition and real-time signal transmissive. In addition, a physical model using the energy attenuation of ultrasonic which based on measurement results of gas bubble diameter obtained by fluid sampler is proposed to improve the gas phase volume fraction prediction accuracy of liquid slug. The experiment results show that the ultrasonic dual mode sensor can accurately measure the GVF of slug flow with complex flow structure, providing a new research method for industrial slug flow measurement.
- 22 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72  (00189456) , 1-13
Measurement and Prediction of Droplet Entrainment in Inclined Liquid–Liquid Flow by PLIF Method
Inclined liquid-liquid two-phase flows widely exist in petroleum, chemical, and other important industrial processes. The study of droplet entrainment in inclined flow is of great significance for investigating the heat/mass transfer between phases and optimizing the industrial production processes. In this study, a planar laser-induced fluorescence (PLIF) system is designed to visualize the inclined liquid-liquid flows. The silicone oil (organic phase) and water/glycerol mixture (aqueous phase) are used as the experimental media. The length and amplitude of the interfacial waves are derived from the flow visualizations. The relationship between the critical wavelengths and Froude number is explored to indicate the transition from stratified flow (ST) to stratified flow with mixing at the interface (ST&MI). The wave aspect ratio is derived to characterize the instability and breakage of the interfacial wave. Meanwhile, the entrainment ratios of dispersed droplets in the continuous phases are detected, and the effects of the flow rate and the interfacial shear on the droplet entrainment are studied. Finally, a physical model is developed to predict the droplet entrainment ratios based on the force balance analysis of the interfacial wave. In general, the developed model is effective in predicting the droplet entrainment ratio with mean absolute errors of 0.015 and 0.023 for the organic and aqueous droplets, respectively.
- 22 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72  (00189456) , 1-13
Measurement and Prediction of Droplet Entrainment in Inclined Liquid–Liquid Flow by PLIF Method
Inclined liquid-liquid two-phase flows widely exist in petroleum, chemical, and other important industrial processes. The study of droplet entrainment in inclined flow is of great significance for investigating the heat/mass transfer between phases and optimizing the industrial production processes. In this study, a planar laser-induced fluorescence (PLIF) system is designed to visualize the inclined liquid-liquid flows. The silicone oil (organic phase) and water/glycerol mixture (aqueous phase) are used as the experimental media. The length and amplitude of the interfacial waves are derived from the flow visualizations. The relationship between the critical wavelengths and Froude number is explored to indicate the transition from stratified flow (ST) to stratified flow with mixing at the interface (ST&MI). The wave aspect ratio is derived to characterize the instability and breakage of the interfacial wave. Meanwhile, the entrainment ratios of dispersed droplets in the continuous phases are detected, and the effects of the flow rate and the interfacial shear on the droplet entrainment are studied. Finally, a physical model is developed to predict the droplet entrainment ratios based on the force balance analysis of the interfacial wave. In general, the developed model is effective in predicting the droplet entrainment ratio with mean absolute errors of 0.015 and 0.023 for the organic and aqueous droplets, respectively.
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. PP  (00189456) , 1
Measurements on interfacial characteristics and droplet entrainment in horizontal liquid-liquid flows: A Comparison of PLIF Versus WMS
The accurate detection of horizontal liquid-liquid two-phase flow structures is all-important for understanding the flow dynamic behaviors and uncovering the flow pattern transition mechanism. In this paper, a 10×10 conductance wire-mesh sensor (WMS) is designed to detect the interface structures and the entrained organic droplets. The liquid-liquid flow structures at the pipe radial section are visualized by the WMS. Due to the limitation of the WMS spatial resolution, adhesions between the droplets and the stratified interface are always encountered in the 2D flow visualizations. To overcome the effect of the adhesions, watershed algorithm and axial gradient correction algorithm are used to separate the adherent droplets and the interface. Thus, the dispersed droplets and the liquid-liquid interface can be extracted to reconstruct the 3D flow visualizations. To validate the performance of the conductance WMS, we design a novel planar laser-induced fluorescence (PLIF) system with a high temporal-spatial resolution. The incident direction of the laser sheet is along the pipe radial section, and the angle between the laser sheet and the high-speed camera is 60°, i.e., PLIF-60. The phase distribution at the pipe radial section can be accurately detected by the PLIF-60 system. By comparison, the conductance WMS performs well in detecting unstable interface structure, and the maximum relative errors of the average interfacial height and length measured by WMS are both less than 10%. The WMS measurement results allow indicating the evolution characteristics of the liquid-liquid interface and the droplet entrainment. The PLIF method is precise in measuring the organic droplets over the WMS method, especially for the droplets smaller than 1 mm. The detection capability of the WMS for the droplet distribution is investigated. The limitation of the WMS in detecting small droplets is quantitatively demonstrated by the probability density function (PDF) of the droplet diameters and the droplet entrainment rate.
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. PP  (00189456) , 1
Measurements on interfacial characteristics and droplet entrainment in horizontal liquid-liquid flows: A Comparison of PLIF Versus WMS
The accurate detection of horizontal liquid-liquid two-phase flow structures is all-important for understanding the flow dynamic behaviors and uncovering the flow pattern transition mechanism. In this paper, a 10×10 conductance wire-mesh sensor (WMS) is designed to detect the interface structures and the entrained organic droplets. The liquid-liquid flow structures at the pipe radial section are visualized by the WMS. Due to the limitation of the WMS spatial resolution, adhesions between the droplets and the stratified interface are always encountered in the 2D flow visualizations. To overcome the effect of the adhesions, watershed algorithm and axial gradient correction algorithm are used to separate the adherent droplets and the interface. Thus, the dispersed droplets and the liquid-liquid interface can be extracted to reconstruct the 3D flow visualizations. To validate the performance of the conductance WMS, we design a novel planar laser-induced fluorescence (PLIF) system with a high temporal-spatial resolution. The incident direction of the laser sheet is along the pipe radial section, and the angle between the laser sheet and the high-speed camera is 60°, i.e., PLIF-60. The phase distribution at the pipe radial section can be accurately detected by the PLIF-60 system. By comparison, the conductance WMS performs well in detecting unstable interface structure, and the maximum relative errors of the average interfacial height and length measured by WMS are both less than 10%. The WMS measurement results allow indicating the evolution characteristics of the liquid-liquid interface and the droplet entrainment. The PLIF method is precise in measuring the organic droplets over the WMS method, especially for the droplets smaller than 1 mm. The detection capability of the WMS for the droplet distribution is investigated. The limitation of the WMS in detecting small droplets is quantitatively demonstrated by the probability density function (PDF) of the droplet diameters and the droplet entrainment rate.
- Open Access
Measurement of Interfacial Characteristics of Horizontal and Inclined Oil–Water Flows by Using Wire-Mesh Sensor
Oil–water flows are widely encountered in petroleum, chemical, nuclear reactors, and other crucial industrial processes. Due to gravity and interaction between phases, horizontal and inclined oil–water two-phase flows are characterized by remarkable multi-scale structure characteristics, such as large-scale stratified interface and small-scale droplets entrainment. Moreover, a slight change in the pipe inclination will lead to significant changes in the local oil–water flow structures, which results in great challenges in the measurement of the interface structures. In this study, we design a 10 × 10 conductance wire-mesh sensor (WMS) to detect the interfacial characteristics of horizontal and inclined oil–water flows. Firstly, we carry out horizontal and inclined oil–water flow experiments. The influence of pipe inclinations on the flow transition boundary is analyzed. The three-dimensional (3D) structures of oil–water flows are visualized based on the WMS measurement response. Then, edge detection is implemented to process the two-dimensional (2D) flow images visualized by the WMS. The influence of complexly distributed droplets is effectively removed by using binary image morphological transformation and watershed algorithm, and thus, oil–water interface structures are accurately extracted. Finally, the influence of the oil–water flow conditions and pipe inclinations on the configuration, height, and length of the stratified interface are investigated.
Open AccessMeasurement of Interfacial Characteristics of Horizontal and Inclined Oil–Water Flows by Using Wire-Mesh Sensor
Oil–water flows are widely encountered in petroleum, chemical, nuclear reactors, and other crucial industrial processes. Due to gravity and interaction between phases, horizontal and inclined oil–water two-phase flows are characterized by remarkable multi-scale structure characteristics, such as large-scale stratified interface and small-scale droplets entrainment. Moreover, a slight change in the pipe inclination will lead to significant changes in the local oil–water flow structures, which results in great challenges in the measurement of the interface structures. In this study, we design a 10 × 10 conductance wire-mesh sensor (WMS) to detect the interfacial characteristics of horizontal and inclined oil–water flows. Firstly, we carry out horizontal and inclined oil–water flow experiments. The influence of pipe inclinations on the flow transition boundary is analyzed. The three-dimensional (3D) structures of oil–water flows are visualized based on the WMS measurement response. Then, edge detection is implemented to process the two-dimensional (2D) flow images visualized by the WMS. The influence of complexly distributed droplets is effectively removed by using binary image morphological transformation and watershed algorithm, and thus, oil–water interface structures are accurately extracted. Finally, the influence of the oil–water flow conditions and pipe inclinations on the configuration, height, and length of the stratified interface are investigated.
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Detection of interfacial shear stress and droplet detachment using PLIF&PIV methods in horizontal liquid-liquid flows
Horizontal liquid-liquid two-phase flows are widely encountered in petroleum, chemical, pharmaceutical and other important industrial production fields. The detection of interfacial shear stress is of great significance for understanding the flow characteristics and revealing the transition mechanism from stratified to non-stratified flow. In this paper, a PLIF&PIV fluid visualization system was designed, and the dynamic experiment of horizontal liquid-liquid two-phase flow was carried out to obtain PLIF&PIV flow images in three flow patterns as stratified flow (ST), stratified wavy flow (SW) and stratified flow with mixing at interface (ST&MI). The velocity distribution of the aqueous phase and two phases distribution were obtained through image processing, and the aqueous velocity near the interface and the organic phase velocity were extracted, thus deriving the interfacial shear stress distribution. The effect of shear stress on the instability of interfacial waves was studied, and the changing regular of interfacial shear stress during the droplet detachment was observed.
- 16 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Detection of interfacial shear stress and droplet detachment using PLIF&PIV methods in horizontal liquid-liquid flows
Horizontal liquid-liquid two-phase flows are widely encountered in petroleum, chemical, pharmaceutical and other important industrial production fields. The detection of interfacial shear stress is of great significance for understanding the flow characteristics and revealing the transition mechanism from stratified to non-stratified flow. In this paper, a PLIF&PIV fluid visualization system was designed, and the dynamic experiment of horizontal liquid-liquid two-phase flow was carried out to obtain PLIF&PIV flow images in three flow patterns as stratified flow (ST), stratified wavy flow (SW) and stratified flow with mixing at interface (ST&MI). The velocity distribution of the aqueous phase and two phases distribution were obtained through image processing, and the aqueous velocity near the interface and the organic phase velocity were extracted, thus deriving the interfacial shear stress distribution. The effect of shear stress on the instability of interfacial waves was studied, and the changing regular of interfacial shear stress during the droplet detachment was observed.
- 24 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71  (00189456) , 1-12
Measurement of Oil–Gas–Water Flows in Vertical Pipes Using Electromagnetic Flowmeter and Dual-Conductance Sensors
Three-phase flows are significantly complicated in comparison to single-phase flows and gas–liquid two-phase flows. So far, faced with the presence of two nonconductive dispersed phases in oil–gas–water three-phase flows, the measurement characteristics of electromagnetic flowmeter (EMF) in three-phase flows are an unresolved problem. The flowrate of three-phase flows is difficult to measure due to the nonuniformity arising from interactions between dispersed phases. Aiming at the difficult problem of production logging in oil wells of three-phase flows, this article reports an experimental study on measuring three-phase flows via the EMF and the dual-conductance sensors. Among them, the phase holdups of three-phase flow in vertical pipe are extracted through newly designed distributed coaxial double-ring conductance sensor (DRCS) and rotating electric field conductance sensor (REFCS). A three-phase flow loop test in a pipe of 20 mm inner diameter is carried out. The results show that the EMF has the ability to substantively measure the flowrate of water phase under three flow patterns (bubble, slug, and churn flows) when the water cut is above 60%, and the average absolute percentage deviation (AAPD) for prediction of superficial water velocity is 3.55%. The measurement of superficial gas and oil velocities is implemented by solving the drift-flux models of three-phase flow based on the phase holdups and superficial water velocity, and the AAPDs for predictions of superficial gas and oil velocities are 4.33% and 5.95%, respectively. This research provides a new measurement strategy for production logging of oil, gas, and water three-phase flow production profile by combining the EMF with dual-conductance sensors.
- 24 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71  (00189456) , 1-12
Measurement of Oil–Gas–Water Flows in Vertical Pipes Using Electromagnetic Flowmeter and Dual-Conductance Sensors
Three-phase flows are significantly complicated in comparison to single-phase flows and gas–liquid two-phase flows. So far, faced with the presence of two nonconductive dispersed phases in oil–gas–water three-phase flows, the measurement characteristics of electromagnetic flowmeter (EMF) in three-phase flows are an unresolved problem. The flowrate of three-phase flows is difficult to measure due to the nonuniformity arising from interactions between dispersed phases. Aiming at the difficult problem of production logging in oil wells of three-phase flows, this article reports an experimental study on measuring three-phase flows via the EMF and the dual-conductance sensors. Among them, the phase holdups of three-phase flow in vertical pipe are extracted through newly designed distributed coaxial double-ring conductance sensor (DRCS) and rotating electric field conductance sensor (REFCS). A three-phase flow loop test in a pipe of 20 mm inner diameter is carried out. The results show that the EMF has the ability to substantively measure the flowrate of water phase under three flow patterns (bubble, slug, and churn flows) when the water cut is above 60%, and the average absolute percentage deviation (AAPD) for prediction of superficial water velocity is 3.55%. The measurement of superficial gas and oil velocities is implemented by solving the drift-flux models of three-phase flow based on the phase holdups and superficial water velocity, and the AAPDs for predictions of superficial gas and oil velocities are 4.33% and 5.95%, respectively. This research provides a new measurement strategy for production logging of oil, gas, and water three-phase flow production profile by combining the EMF with dual-conductance sensors.