Nacu Hernandez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nacu Hernandez has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Eric W. Cochran
Department of Chemical and Biological Engineering, Iowa State University, Sweeney Hall, 618 Bissell Road, Ames, Iowa 50011, United States
20 shared publications R. Christopher Williams
Department of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA
8 shared publications- Jean-Philippe Tessonnier
Department of Chemical and Biological Engineering Iowa State University Ames Iowa USA
6 shared publications - Michael John Forrester
Department of Chemical and Biological Engineering, Iowa State University, Ames, IA 50011, USA
5 shared publications - Adam Okerlund
NSF Engineering Research Center for Biorenewable Chemicals (CBiRC) Ames IA 50011 USA
4 shared publications - Jack M. Carraher
Department of Chemical and Biological Engineering
4 shared publications
Latest Publications
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (32) , 12042-12051
Glycerol-Based Pressure Sensitive Adhesives: Synthesis and Applications
- 1 August 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (32) , 12042-12051
Glycerol-Based Pressure Sensitive Adhesives: Synthesis and Applications
- 6 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46912-46919
Cavitation-Mediated Fracture Energy Dissipation in Polylactide at Rubbery Soybean Oil-Based Block Copolymer Interfaces Formed via Reactive Extrusion
Here, we spearhead a new approach to biopolymer impact modification that demonstrates superior performance while maintaining greater than 99% compostability. Using soybean-based monomers, a virtually untapped resource in terms of commercial volume and overall cost, a series of hyperbranched block copolymers were synthesized and melt-processed with poly(l-lactide) (PLA) to yield impact resistant all-polymer composites. Although PLA impact modification has been treated extensively, to date, the only practical solutions have relied on non-compostable petroleum-based rubbers. This study illustrates the activity of energy dissipation mechanisms such as cavitation, classically relegated to well-entangled petroleum-based rubbers, in poorly entangled hyperbranched soybean-based rubbers. Furthermore, we present a complete study of the mechanical performance and morphology of these impact modified PLA composites. The significance of combining deformation theory with a scalable green alternative to petroleum-based rubbers opens up a potential avenue for cheap compostable engineering thermoplastics.
- 6 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46912-46919
Cavitation-Mediated Fracture Energy Dissipation in Polylactide at Rubbery Soybean Oil-Based Block Copolymer Interfaces Formed via Reactive Extrusion
Here, we spearhead a new approach to biopolymer impact modification that demonstrates superior performance while maintaining greater than 99% compostability. Using soybean-based monomers, a virtually untapped resource in terms of commercial volume and overall cost, a series of hyperbranched block copolymers were synthesized and melt-processed with poly(l-lactide) (PLA) to yield impact resistant all-polymer composites. Although PLA impact modification has been treated extensively, to date, the only practical solutions have relied on non-compostable petroleum-based rubbers. This study illustrates the activity of energy dissipation mechanisms such as cavitation, classically relegated to well-entangled petroleum-based rubbers, in poorly entangled hyperbranched soybean-based rubbers. Furthermore, we present a complete study of the mechanical performance and morphology of these impact modified PLA composites. The significance of combining deformation theory with a scalable green alternative to petroleum-based rubbers opens up a potential avenue for cheap compostable engineering thermoplastics.
- 29 September 2022
- Published by American Oil Chemists Society
Soybean Oil-based polymeric coatings for the rejuvenation of old asphalt shingles
According to a new report by Reports and Data, the global asphalt shingles market is forecasted to reach USD 9.8 billion by 2027. Asphalt shingles are a type of waterproof roofing material that has a long lifespan and is relatively inexpensive; in addition to their numerous colors and styles, makes them the most popular type of roofing material in North America. However, more than 11 million tons of asphalt shingle waste is generated in the US alone each year. In this study, we explored the use of a biobased emulsion composed of a partially epoxidized soybean oil together with a poly (acrylated epoxidized soybean oil) with a biobased surfactant to produce a spray that served as a rejuvenator of aged shingles. As asphalt shingles age, they become brittle, becoming less resistant to wind and hail. The application of the soybean oil-based spray to aged asphalt shingles restored their flexibility and dramatically improved their granule retention. This improvement makes for much longer-lasting asphalt shingles capable of standing extreme weather conditions for increased periods and thus decreasing the number of shingles that end up in landfills.
- 29 September 2022
- Published by American Oil Chemists Society
Soybean Oil-based polymeric coatings for the rejuvenation of old asphalt shingles
According to a new report by Reports and Data, the global asphalt shingles market is forecasted to reach USD 9.8 billion by 2027. Asphalt shingles are a type of waterproof roofing material that has a long lifespan and is relatively inexpensive; in addition to their numerous colors and styles, makes them the most popular type of roofing material in North America. However, more than 11 million tons of asphalt shingle waste is generated in the US alone each year. In this study, we explored the use of a biobased emulsion composed of a partially epoxidized soybean oil together with a poly (acrylated epoxidized soybean oil) with a biobased surfactant to produce a spray that served as a rejuvenator of aged shingles. As asphalt shingles age, they become brittle, becoming less resistant to wind and hail. The application of the soybean oil-based spray to aged asphalt shingles restored their flexibility and dramatically improved their granule retention. This improvement makes for much longer-lasting asphalt shingles capable of standing extreme weather conditions for increased periods and thus decreasing the number of shingles that end up in landfills.
- 9 September 2021
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (2) , 464-475
Performance Evaluation of Bioengineered Recycled Asphalt Materials
In this study, asphalt mixtures were engineered with bio-renewable soybean oil-derived modifiers, and then used for pavement demonstration projects in the U.S. states of Iowa and Minnesota in the summer of 2019. The performance grade, elastic recovery (R), and non-recoverable creep compliance (Jnr) of the binders were evaluated. The modification of asphalt binder for the Iowa project almost maintained the high and low temperature grades, and the presence of modifier in the mixture of Minnesota project resulted in a slight decrease in the low temperature grade while maintaining the high temperature grade. The Jnr and R values proved the increase of elasticity and relaxation of the asphalt binder modified for the Iowa project. The Jnr calculated for the Minnesota project revealed a considerable increase in the relaxation of the asphalt binder. Disc-shaped compact tension, Hamburg wheel tracking, and push-pull were the mechanical performance tests performed on the mixtures. Based on the results obtained from these tests, the Iowa mixture, produced with modified asphalt binder, showed a significant improvement in resistance to low-temperature cracking, rutting, moisture damage, and fatigue cracking. The Minnesota mixture, modified in the plant, showed a significant improvement in the fatigue performance and a slight improvement in low-temperature cracking resistance.
- 9 September 2021
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (2) , 464-475
Performance Evaluation of Bioengineered Recycled Asphalt Materials
In this study, asphalt mixtures were engineered with bio-renewable soybean oil-derived modifiers, and then used for pavement demonstration projects in the U.S. states of Iowa and Minnesota in the summer of 2019. The performance grade, elastic recovery (R), and non-recoverable creep compliance (Jnr) of the binders were evaluated. The modification of asphalt binder for the Iowa project almost maintained the high and low temperature grades, and the presence of modifier in the mixture of Minnesota project resulted in a slight decrease in the low temperature grade while maintaining the high temperature grade. The Jnr and R values proved the increase of elasticity and relaxation of the asphalt binder modified for the Iowa project. The Jnr calculated for the Minnesota project revealed a considerable increase in the relaxation of the asphalt binder. Disc-shaped compact tension, Hamburg wheel tracking, and push-pull were the mechanical performance tests performed on the mixtures. Based on the results obtained from these tests, the Iowa mixture, produced with modified asphalt binder, showed a significant improvement in resistance to low-temperature cracking, rutting, moisture damage, and fatigue cracking. The Minnesota mixture, modified in the plant, showed a significant improvement in the fatigue performance and a slight improvement in low-temperature cracking resistance.
- 17 August 2021
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 54 (17) , 7910-7924
Analysis of the Amorphous and Interphase Influence of Comononomer Loading on Polymer Properties toward Forwarding Bioadvantaged Copolyamides
- 17 August 2021
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 54 (17) , 7910-7924
Analysis of the Amorphous and Interphase Influence of Comononomer Loading on Polymer Properties toward Forwarding Bioadvantaged Copolyamides
- Open Access
- 27 February 2021
- Published by Wiley in Polymer International
- Vol. 70 (7) , 911-917
An update on the future prospects of glycerol polymers
Glycerol, a water‐soluble polyol, is currently used in a wide variety of markets, e.g. as a sweetener in drinks, as an additive in the food and cosmetics industry, or as an antifreeze agent, to name a few. The blooming biodiesel production has created an excess supply of glycerol by‐product. Researchers all around the world are actively exploring strategies to utilize this cheap and abundantly available biobased molecule. To date, glycerol‐based polymers have only been examined extensively for use in biomedical applications; however, the use of biobased crude glycerol is not viable for such applications due to the presence of impurities such as methanol and residual fatty acids from the biodiesel production process. However, the increased volumes of glycerol generated from biodiesel production have stimulated the research on its use in various other industrial applications such as the production of commodity chemicals, polymers etc. In this article, we summarize some of the efforts to valorize glycerol for polymeric applications such as polyurethanes, polyhydroxyalkanoates and adhesives. © 2021 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.
- 27 February 2021
- Published by Wiley in Polymer International
- Vol. 70 (7) , 911-917
Open AccessAn update on the future prospects of glycerol polymers
Glycerol, a water‐soluble polyol, is currently used in a wide variety of markets, e.g. as a sweetener in drinks, as an additive in the food and cosmetics industry, or as an antifreeze agent, to name a few. The blooming biodiesel production has created an excess supply of glycerol by‐product. Researchers all around the world are actively exploring strategies to utilize this cheap and abundantly available biobased molecule. To date, glycerol‐based polymers have only been examined extensively for use in biomedical applications; however, the use of biobased crude glycerol is not viable for such applications due to the presence of impurities such as methanol and residual fatty acids from the biodiesel production process. However, the increased volumes of glycerol generated from biodiesel production have stimulated the research on its use in various other industrial applications such as the production of commodity chemicals, polymers etc. In this article, we summarize some of the efforts to valorize glycerol for polymeric applications such as polyurethanes, polyhydroxyalkanoates and adhesives. © 2021 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.
- 24 April 2019
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 220 (10)
Blending the Effectiveness of Anionic Polymerization with the Versatility of RAFT by Use of the Atom Transfer Radical Addition–Fragmentation Technique
The efficient conversion of a living anionic polymer chain end to a macrochain transfer agent suitable for reversible addition–fragmentation chain transfer (RAFT) polymerization is reported. Conversion to the macrochain transfer agent efficiency reached as high as 97% by capping the polyanion with alcohol, coupling with α‐bromoisobutryl bromide, followed by atom‐transfer radical addition–fragmentation with bis(thiobenzyl)disulfide to add the chain transfer agent functionality. To our knowledge, this is the most efficient marriage of anionic and reversible addition–fragmentation transfer polymerization reported to date, and can be carried out under common industrial processing conditions. The combination of these polymerization methods broadens the scope of commercially accessible block copolymers by exploiting the advantages of both RAFT and anionic polymerization chemistries.
- 24 April 2019
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 220 (10)
Blending the Effectiveness of Anionic Polymerization with the Versatility of RAFT by Use of the Atom Transfer Radical Addition–Fragmentation Technique
The efficient conversion of a living anionic polymer chain end to a macrochain transfer agent suitable for reversible addition–fragmentation chain transfer (RAFT) polymerization is reported. Conversion to the macrochain transfer agent efficiency reached as high as 97% by capping the polyanion with alcohol, coupling with α‐bromoisobutryl bromide, followed by atom‐transfer radical addition–fragmentation with bis(thiobenzyl)disulfide to add the chain transfer agent functionality. To our knowledge, this is the most efficient marriage of anionic and reversible addition–fragmentation transfer polymerization reported to date, and can be carried out under common industrial processing conditions. The combination of these polymerization methods broadens the scope of commercially accessible block copolymers by exploiting the advantages of both RAFT and anionic polymerization chemistries.
- 1 January 2018
- Published by American Chemical Society (ACS)
- p. 355-367
Bioadvantaged Nylon from Renewable Muconic Acid: Synthesis, Characterization, and Properties
- 1 January 2018
- Published by American Chemical Society (ACS)
- p. 355-367
Bioadvantaged Nylon from Renewable Muconic Acid: Synthesis, Characterization, and Properties
- 3 October 2017
- Published by Springer Nature in Materials and Structures
- Vol. 50 (5) , 225
Preliminary investigation of bioadvantaged polymers as sustainable alternatives to petroleum-derived polymers for asphalt modification
- 3 October 2017
- Published by Springer Nature in Materials and Structures
- Vol. 50 (5) , 225
Preliminary investigation of bioadvantaged polymers as sustainable alternatives to petroleum-derived polymers for asphalt modification