WVWallter Francisco Salas Valerio

Wallter Francisco Salas Valerio

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wallter Francisco Salas Valerio has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Prediction of the Initial Freezing Temperature of Exotic Fruits Grown in Peru Using Artificial Neural Networks

    by Fernando Gutierrez‐Alcázar, Walter Salas‐Valerio, Kevin Quesada, Julio Vidaurre‐Ruiz

    This study aimed to develop and evaluate different artificial neural network (ANN) architectures to predict the initial freezing temperature (Tf) of exotic Peruvian fruits. The physicochemical properties of 17 commercial fruits: moisture content (%H), soluble solids (°Brix), pH, titratable acidity (%), and Tf were experimentally determined and used to train various ANN models and construct a nonlinear empirical model. The most accurate ANN consisted of three hidden layers with 20 neurons each and sigmoid activation functions, achieving a maximum absolute deviation (AD) of ±0.18°C. The proposed empirical model (Tf = −0.21°Brix0.98 %H1.57) also showed good predictive performance (AD = ±0.37°C). Both models were validated using exotic fruits cultivated in Peru (pitahaya, aguaje, cherimoya, camu camu, and sanky), with the ANN achieving a maximum AD of ±0.24°C and a nonlinear model with a maximum AD of ±0.59°C. In conclusion, the developed ANN demonstrated high accuracy in predicting Tf, outperformed previously reported models in the literature, and represents a promising tool for applications in tropical fruit processing and preservation.

  • Shelf life prediction of gluten-free bread formulated with quinoa flour: comparison of packaging materials using mathematical modeling and survival analysis

    by Diego Fernando García-Ramón, Edgar Norabuena, Alejandrina Sotelo-Méndez, Marlitt Naupay Vega, Liliana Sumarriva, Julio Vidaurre-Ruiz, Beetthssy Z. Hurtado-Soria, Eudes Villanueva, Walter Francisco Salas-Valerio


  • Open Access

    Effect of Convective Drying and Far-Infrared Radiation on the Physical Properties and Microstructure of Yacón Chips (Smallanthus sonchifolius)

    by Edwin O. Baldeón, Álvaro Bracamonte-Herrera, Andrés Soto-Torres, Walter F. Salas-Valerio, Julio Mauricio Vidaurre-Ruiz

    Convective drying is widely used in the food industry due to its simplicity and versatility, as it allows for better temperature control and heat distribution, which is essential for maintaining product quality. However, this method can be slower compared to infrared drying. The aim of this research was to evaluate the effect of convective and infrared drying on the physical properties and microstructure of yacón chips. An infrared dryer and a convection dryer were used to this effect, setting temperatures of 60, 70, and 80 °C for both methods. The color and texture properties, as well as the microstructure, changed with the increase in temperature. The greatest color variation in the yacón samples was reported by infrared drying at a temperature of 80 ° C. Regarding texture, there were no differences between the two methods. The microstructure of the yacón samples dried by hot air exhibited more significant cell damage, especially at 60 °C, in comparison with infrared drying, which showed a more microporous and compact structure. The results indicate that the method used impacted shrinkage: infrared drying produced a higher level of shrinkage when compared to convective drying. It is important to note that this is a significant physical change that can adversely affect the quality of dehydrated food. Infrared drying produced greater rehydration in comparison with convective drying. Similarly, improved rehydration was observed at a temperature of 70 ºC. In conclusion, the infrared drying method, coupled with appropriate drying conditions, constitutes a good alternative for drying yacón chips.


  • CONVECTIVE DRYING KINETICS OF YACON (Smallanthus sonchifolius Poepp. Endl.) SLABS AND EVALUATION OF THE DRYER PID TEMPERATURE CONTROL SYSTEM

    by Edwin O. Baldeón, Walter F. Salas-Valerio, Julio M. Vidaurre-Ruiz, Raúl Comettant-Rabanal

    Yacon is a functional food that is rich in fructooligosaccharides (FOS) and highly perishable, which requires inexpensive methods for its preservation. The objectives of this research were to model the kinetics of convection drying of yacon slabs and to assess the effect of air velocity on the temperature record of the heating zone controlled by the Proportional-Integral-Derivative control system (PID). Different temperatures (60, 70, and 80 °C) at constant air velocity (0.87 m s-1) were evaluated in a convective tray drying system. To determine the effect of air velocity on the PID temperature controller, different air velocities (0.81-2.06 m s-1) at constant temperature (70 °C) were studied. The results showed that Page’s model was the best fitting of the data obtained, the effective diffusivity of convective drying of yacon ranged from 1.22x10-10 to 1.9x10-10 m2 s-1 and the activation energy was 21.76 kJ mol-1. With PID temperature control, it was observed that the best drying rate and lowest temperature signal error occurred at an air velocity of 1.46 m s-1, where the temperature signal was more stable and closer to the reference temperature. In conclusion, the kinetic modeling of the convective drying of yacon provides optimal drying parameters as well as behavior of mass and heat transfer phenomena, particularly considering that the effect of air velocity influences the drying kinetics and the PID temperature control of the dryer.


  • A proposal to model the pasting curve of gluten‐free bakery formulations

    by Julio Vidaurre‐Ruiz, Walter Salas‐Valerio, Luis Briceño‐Berrú, Edwin O. Baldeón, Ritva Repo‐Carrasco‐Valencia, María Jimena Correa

    This research aimed to propose a comprehensive mathematical model that allows simulation of the viscosity profile achieved during the pasting analysis of gluten‐free bakery product formulations. The model divides the pasting curve into three parts, utilizing the modified Hill equation for gelatinization, the Gompertz equation for breakdown and retrogradation, and introduces novel parameters (Krheo1, Krheo2, Krheo3) to quantify the areas under each curve section. Validation involved viscoamylographic profiles of gluten‐free muffins with potato starch and Andean grain flours, with and without adding xanthan gum (XG). Results indicate XG increases resistance to gelatinization and decreases swelling rate in potato starch, while Andean grain flours with XG increase swelling rate. Gompertz equation parameters reveal improved heat stability and reduced retrogradation with Andean grain flours and XG. The proposed model serves as a versatile tool for interpreting ingredient effects, aiding in the optimization of starch‐containing food formulations.Practical applications: The viscosity profile obtained in Rapid Visco Analyzer (RVA) test is of utmost importance for the development of gluten‐free bakery products because it allows us to understand the viscosity behavior of the system during the baking process, which is essential to achieve the proper consistency in the dough. The absence of gluten in gluten‐free formulations can make the dough less stable during baking; therefore, the mathematical modeling of the viscosity profile obtained during the pasting analysis helps to understand how the ingredients affect the system's stability, providing information about the gelatinization, breakdown, and retrogradation rates of starches. It also aids in understanding the consistency of the system at the end of the analysis, enabling adjustments to formulations to prevent dough stability issues during the baking process.


  • Open Access

    Rheological and textural properties of gluten‐free doughs made from Andean grains

    by Julio Vidaurre‐Ruiz, Francisco Salas‐Valerio, Regine Schoenlechner, Ritva Repo‐Carrasco‐Valencia

    Summary: The objective of this research was to evaluate the rheological and textural properties of gluten‐free doughs based on potato starch, which was partially substituted by different proportions of quinoa (10%, 30% and 50%), kiwicha (10%, 30% and 50%) or tarwi flour (10%, 20% and 30%). The influence of the substitution on the kinetics of the leavening process was studied as well. The back‐extrusion technique was used to determine rheological and textural properties of the dough, and the leavening kinetics were modelled using the Gompertz equation. The results showed that textural properties such as firmness, consistency, cohesiveness and viscosity index, as well as the consistency index of the doughs increased as the level of substitution of the Andean grain flour in the formulation increased. It was determined that the formulations with an addition of 10% and 20% for quinoa or kiwicha flour, and 10% for tarwi flour would be most suitable for developing gluten‐free breads.


  • Determination of the thermal diffusivity and the temperature profiles of the whole potato (Solanum tuberosum L.) during heating in a liquid medium

    by Wallter Francisco Salas Valerio, Jose Francisco Moro Pisco

    The objective of this work was to determine the thermal diffusivity of the potato and to model heat transfer and temperature in the potato (Solanum tuberosum L.) during heating in a liquid medium. Potatoes of the Yungay variety were used. The experimental methodology was carried out through five stages, such as: determination of the characteristic dimensions of the potato (equivalent diameter), determination of thermal diffusivity (alpha)), experimental obtaining of the temperature at different positions within the potato with a temperature of liquid medium at 70 degrees C, modeling was done using the heat transfer equation by conduction in only one direction and the solution of said equation was performed using the methodology of finite differences (forward) was developed from a computer program in Visual Basic Excel (R) to simulate the temperature profiles and finally the simulated values were compared with the experimental values. The thermal diffusivity values were obtained using the heating curve of the samples at temperatures of 70 degrees C. The equivalent diameter value was 7,6536 cm. The experimental value of the thermal diffusivity (a)) of the potato was 1,49 x10(-7) m(2)/s which is within the expected range for roots and tubers. Likewise, the simulated temperature profiles were compared with the experimental temperature profiles in distinct positions, and it was found that the central temperature managed to fix with the temperature in the center of the potato with an error level between 1.37% and 7, 83%.

  • Three‐dimensional modeling of heat transfer during freezing of suspended and in‐contact‐with‐a‐surface yellow potatoes and ullucus

    by Walter Salas‐Valerio, Miguel Solano‐Cornejo, Moisés Zelada‐Bazán, Julio Vidaurre‐Ruiz

    The aim of this research was to model the heat transfer during the freezing process of cubed yellow potatoes (Solanum tuberosum L.) and ullucus (Ullucus tuberosus Caldas). A mathematical model was developed using the three‐dimensional (3D) finite difference scheme to simulate the freezing process of suspended and in‐contact‐with‐a‐surface cubic particles. The thermophysical properties were predicted using the proximal composition and the convective heat transfer coefficient (h) was obtained by optimizing the root mean square error (RMSE) value. A pseudo h was included to simulate the heat transfer of cubic particles in‐contact‐with‐a‐surface. Low values of h were found for suspended frozen cubes (17–27 W/m2°C) and high values of pseudo h (295–371 W/m2°C) were determined for frozen cubes in‐contact‐with‐a‐surface. An excellent agreement was observed between experimental and predicted temperatures histories (RMSE: 0.6–1.7°C) at different thermocouples positions. In conclusion, the developed model simulated correctly the freezing profile of potato and ullucu in cubic shape. With this model, the possible effects of h and external temperature on freezing times of these vegetables under different positions were evaluated and were represented by polynomial equations that could be used in the industry.Practical Applications: In this research, a simple and easy‐to‐implement mathematical model was developed to simulate the heat transfer during freezing process of yellow potatoes and ullucus in cubes. The 3D finite difference scheme developed can be used to simulate the freezing of suspended cubed food, as is the case of fluidized bed freezers, or that are in contact with a metal surface, as in plate freezers. In addition, this study presented polynomial equations that allow the quick and precise calculation of the freezing times of cubed yellow potatoes and ullucus.


  • Open Access

    Influence of tara gum and xanthan gum on rheological and textural properties of starch-based gluten-free dough and bread

    by Julio Vidaurre-Ruiz, Shessira Matheus-Diaz, Francisco Salas-Valerio, Gabriela Barraza-Jauregui, Regine Schoenlechner, Ritva Repo-Carrasco-Valencia