Oleksiy Sydoruk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Oleksiy Sydoruk has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Richard R. A. Syms
EEE Department, Imperial College London, Exhibition Road, SW7 2AZ London, United Kingdom
7 shared publications - John E. Cunningham
University of Leeds
5 shared publications - Artem Voronov
Department of Electrical and Electronic Engineering, Imperial College London, London, U.K.
4 shared publications - Serhii Siaber
Department of Electronic and Electrical Engineering, Imperial College London, London, UNITED KINGDOM OF GREAT BRITAIN AND NORTHERN IRELAND
4 shared publications L. Solymar
Optical and Semiconductor Devices Group, Department of Electrical and Electronic Engineering, Imperial College London, Exhibition Road, London SW7 2AZ, UK
3 shared publications- Simone Zonetti
Centre for Cosmology Particle Physics and Phenomenology (CP3) Institut de Recherche en Mathématique et Physique Université catholique de Louvain Chemin du Cyclotron 2 B-1348 Louvain-la-Neuve Belgium
3 shared publications
Latest Publications
- Open Access
- 9 September 2024
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 382 (2281) , 20230312
Drifting plasmons in two-dimensional electron channels: circuit analogy
Plasmons in two-dimensional electron channels have potential applications in the terahertz frequency range. Equivalent circuit models provide a convenient framework for analysing the plasmons. This article introduces a circuit model for plasmons in the presence of a dc current that flows in a gated channel. It is shown that drifting plasmons can be described by an LC -transmission line with distributed dependent sources. A circuit analogue of the Dyakonov–Shur instability is demonstrated. Then, a lumped-element transmission line with dependent sources is analysed, and non-reciprocity is demonstrated for examples of a right- and a left-handed transmission line. Effects of ohmic loss are discussed. The results could be used for the design of non-reciprocal transmission line devices. This article is part of the theme issue ‘Celebrating the 15th anniversary of the Royal Society Newton International Fellowship’.
- 9 September 2024
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 382 (2281) , 20230312
Open AccessDrifting plasmons in two-dimensional electron channels: circuit analogy
Plasmons in two-dimensional electron channels have potential applications in the terahertz frequency range. Equivalent circuit models provide a convenient framework for analysing the plasmons. This article introduces a circuit model for plasmons in the presence of a dc current that flows in a gated channel. It is shown that drifting plasmons can be described by an LC -transmission line with distributed dependent sources. A circuit analogue of the Dyakonov–Shur instability is demonstrated. Then, a lumped-element transmission line with dependent sources is analysed, and non-reciprocity is demonstrated for examples of a right- and a left-handed transmission line. Effects of ohmic loss are discussed. The results could be used for the design of non-reciprocal transmission line devices. This article is part of the theme issue ‘Celebrating the 15th anniversary of the Royal Society Newton International Fellowship’.
- Open Access
- 7 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (6) , 5026-5035
Waveguide Antenna Topologies for Distributed High-Frequency Near-Field Communication and Localization
High-frequency near-field communication is an inherently short-range technology. However, the total capture volume can be increased with traveling-wave antennas. Here, we report on analysis, design, and measurements of flexible waveguide antennas and discuss their performance for near-field communication and localization. The antennas comprise sections of coaxial transmission lines loaded periodically with field-generating inductive networks. Several topologies were compared to each other theoretically and the best-performing candidate was selected to fabricate antennas between 5 and 48 meters long, each containing 15 read nodes. Waveguiding properties of the antennas were measured and agreement with theory was demonstrated. Afterwards, each antenna was integrated with a custom NFC reader and shown to be capable of near-field communication with and localization of commercial off-the-shelf transponders compliant with ISO 14443 Type A protocol. The transverse detection range was 10 cm with 1 W input RF power. Both one-dimensional and quasi two-dimensional configurations were tested. The proposed antennas are flexible, scalable, have low loss, and could be used for near-field communication, identification, and tracking of distributed and mobile tags.
- 7 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (6) , 5026-5035
Open AccessWaveguide Antenna Topologies for Distributed High-Frequency Near-Field Communication and Localization
High-frequency near-field communication is an inherently short-range technology. However, the total capture volume can be increased with traveling-wave antennas. Here, we report on analysis, design, and measurements of flexible waveguide antennas and discuss their performance for near-field communication and localization. The antennas comprise sections of coaxial transmission lines loaded periodically with field-generating inductive networks. Several topologies were compared to each other theoretically and the best-performing candidate was selected to fabricate antennas between 5 and 48 meters long, each containing 15 read nodes. Waveguiding properties of the antennas were measured and agreement with theory was demonstrated. Afterwards, each antenna was integrated with a custom NFC reader and shown to be capable of near-field communication with and localization of commercial off-the-shelf transponders compliant with ISO 14443 Type A protocol. The transverse detection range was 10 cm with 1 W input RF power. Both one-dimensional and quasi two-dimensional configurations were tested. The proposed antennas are flexible, scalable, have low loss, and could be used for near-field communication, identification, and tracking of distributed and mobile tags.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 347-354
HF RFID Tag Location Using Magneto-Inductive Waves
Location of passive RFID tags in the HF regime presents significant problems, because of the absence of radiating fields at the low frequencies involved. Here we present a solution for one-dimensional localization based on magneto-inductive (MI) waves. Passive tags are interrogated using a travelling wave antenna based on a MI waveguide, a magnetically coupled array of L-C resonators supporting travelling waves. Load modulation signals generated by the tag during its unique identifier response are coupled into the waveguide and travel to either end with low group velocity. Signal timings are measured by cross-correlation, and the tag position is estimated to the nearest resonant loop from the difference in their arrival times. Correlation detection is demonstrated using a system model, and theoretical predictions are confirmed using an experimental system containing eleven transformer-coupled resonators operating at 13.56 MHz frequency. Accurate localization is obtained up to the tag reading limit using <1W RF power.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 347-354
HF RFID Tag Location Using Magneto-Inductive Waves
Location of passive RFID tags in the HF regime presents significant problems, because of the absence of radiating fields at the low frequencies involved. Here we present a solution for one-dimensional localization based on magneto-inductive (MI) waves. Passive tags are interrogated using a travelling wave antenna based on a MI waveguide, a magnetically coupled array of L-C resonators supporting travelling waves. Load modulation signals generated by the tag during its unique identifier response are coupled into the waveguide and travel to either end with low group velocity. Signal timings are measured by cross-correlation, and the tag position is estimated to the nearest resonant loop from the difference in their arrival times. Correlation detection is demonstrated using a system model, and theoretical predictions are confirmed using an experimental system containing eleven transformer-coupled resonators operating at 13.56 MHz frequency. Accurate localization is obtained up to the tag reading limit using <1W RF power.
- Open Access
- 8 March 2022
- Published by MDPI AG in Electronics
- Vol. 11 (6) , 845
High-Performance Magnetoinductive Directional Filters
Multiport magnetoinductive (MI) devices with directional filter properties are presented. Design equations are developed and solved using wave analysis and dispersion theory, and it is shown that high-performance directional filters can be realised for use both in MI systems with complex, frequency-dependent impedance and in conventional systems with real impedance. Wave analysis is used to reduce the complexity of circuit equations. High-performance MI structures combining directional and infinite rejection filtering are demonstrated, as well as multiple-passband high-rejection filtering. A new method for improving filtering performance through multipath loss compensation is described. Methods for constructing tuneable devices using toroidal ferrite-cored transformers are proposed and demonstrated, and experimental results for tuneable MI directional filters are shown to agree with theoretical models. Limitations are explored, and power handling sufficient for HF RFID applications is demonstrated, despite the use of ferrite materials.
- 8 March 2022
- Published by MDPI AG in Electronics
- Vol. 11 (6) , 845
Open AccessHigh-Performance Magnetoinductive Directional Filters
Multiport magnetoinductive (MI) devices with directional filter properties are presented. Design equations are developed and solved using wave analysis and dispersion theory, and it is shown that high-performance directional filters can be realised for use both in MI systems with complex, frequency-dependent impedance and in conventional systems with real impedance. Wave analysis is used to reduce the complexity of circuit equations. High-performance MI structures combining directional and infinite rejection filtering are demonstrated, as well as multiple-passband high-rejection filtering. A new method for improving filtering performance through multipath loss compensation is described. Methods for constructing tuneable devices using toroidal ferrite-cored transformers are proposed and demonstrated, and experimental results for tuneable MI directional filters are shown to agree with theoretical models. Limitations are explored, and power handling sufficient for HF RFID applications is demonstrated, despite the use of ferrite materials.
- 6 October 2021
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (1) , 015103
Effect of mesa geometry on low-terahertz frequency range plasmons in two-dimensional electron systems
We demonstrate engineering of the low-terahertz range plasmonic spectra of two-dimensional electron systems by modifying their geometry. Specifically, we have modelled, fabricated, and measured two devices for comparison. The first device has a rectangular channel, while the second is trapezoidal, designed to support a richer plasmonic spectrum by causing variation in the device width along the direction of plasmon propagation. We show that while plasmon resonant frequencies and field distributions in the rectangular device can largely be described by a simple one-dimensional analytical model, the field distributions modelled in the trapezoidal device shows a more complex pattern with significant variation along the length of the channel, so requiring a two-dimensional treatment. The results illustrate the potential of modifying the channel geometry to obtain different spectra in experiments, with potential applications in the design of novel terahertz-range devices, such as plasmon-based sources and detectors.
- 6 October 2021
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (1) , 015103
Effect of mesa geometry on low-terahertz frequency range plasmons in two-dimensional electron systems
We demonstrate engineering of the low-terahertz range plasmonic spectra of two-dimensional electron systems by modifying their geometry. Specifically, we have modelled, fabricated, and measured two devices for comparison. The first device has a rectangular channel, while the second is trapezoidal, designed to support a richer plasmonic spectrum by causing variation in the device width along the direction of plasmon propagation. We show that while plasmon resonant frequencies and field distributions in the rectangular device can largely be described by a simple one-dimensional analytical model, the field distributions modelled in the trapezoidal device shows a more complex pattern with significant variation along the length of the channel, so requiring a two-dimensional treatment. The results illustrate the potential of modifying the channel geometry to obtain different spectra in experiments, with potential applications in the design of novel terahertz-range devices, such as plasmon-based sources and detectors.
- Open Access
- 9 June 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (22) , 223103
Scattering-induced amplification of two-dimensional plasmons: Electromagnetic modeling
Using two rigorous electromagnetic approaches, we study plasmon scattering in two-dimensional systems and show that plasmon amplification is possible in the presence of dc currents. Two scenarios are considered: plasmon scattering from an interface between different two-dimensional channels and plasmon reflection from electric contacts of arbitrary thickness. In each case, the effect of a dc current of the plasmon reflection and transmission coefficients and the plasmon power are both quantified. A resonant system is studied where plasmon roundtrip gain may exceed unity, showing the possibility of plasmon generation.
- 9 June 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (22) , 223103
Open AccessScattering-induced amplification of two-dimensional plasmons: Electromagnetic modeling
Using two rigorous electromagnetic approaches, we study plasmon scattering in two-dimensional systems and show that plasmon amplification is possible in the presence of dc currents. Two scenarios are considered: plasmon scattering from an interface between different two-dimensional channels and plasmon reflection from electric contacts of arbitrary thickness. In each case, the effect of a dc current of the plasmon reflection and transmission coefficients and the plasmon power are both quantified. A resonant system is studied where plasmon roundtrip gain may exceed unity, showing the possibility of plasmon generation.
- Open Access
- 1 April 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (4) , 045327
Power waves and scattering parameters in magneto-inductive systems
Difficulties arise in the definition of power flow in transmission-line systems with a complex propagation constant. These were resolved by Kurokawa using quantities known as “power waves,” which contain both voltage and current terms and correctly separate power flow into forward- and backward-traveling components. Similar difficulties must arise for electromagnetic metamaterials since any discrete, periodic structure leads to band-limited propagation, with a complex propagation constant both inside and outside the bands due to loss and cutoff, respectively. Here, discrete power waves are defined for magneto-inductive (MI) systems, metamaterials based on chains of magnetically coupled LC resonators. These waves are shown to satisfy the discrete power conservation equation for MI waves and are used to calculate scattering parameters for multi-port MI devices without the anomalous predictions of conventional methods. The results will allow correct evaluation of internal scattering parameters in MI systems.
- 1 April 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (4) , 045327
Open AccessPower waves and scattering parameters in magneto-inductive systems
Difficulties arise in the definition of power flow in transmission-line systems with a complex propagation constant. These were resolved by Kurokawa using quantities known as “power waves,” which contain both voltage and current terms and correctly separate power flow into forward- and backward-traveling components. Similar difficulties must arise for electromagnetic metamaterials since any discrete, periodic structure leads to band-limited propagation, with a complex propagation constant both inside and outside the bands due to loss and cutoff, respectively. Here, discrete power waves are defined for magneto-inductive (MI) systems, metamaterials based on chains of magnetically coupled LC resonators. These waves are shown to satisfy the discrete power conservation equation for MI waves and are used to calculate scattering parameters for multi-port MI devices without the anomalous predictions of conventional methods. The results will allow correct evaluation of internal scattering parameters in MI systems.
- 9 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (2) , 148-153
Magneto-Inductive HF RFID System
Efforts to increase read range in passive HF RFID systems are hampered by the poor range scaling law of inductive coupling. An alternative approach to enlarging capture volume—increasing the lateral extent of the antenna—is proposed, using a magneto-inductive (MI) travelling wave arrangement to allow larger antenna sizes. A theory of load modulation in MI systems is first presented, together with field simulations in the capture volume. A 2.3 metre-long MI antenna is then constructed, and an active tag emulator is used to demonstrate load modulation. RFID is then demonstrated, with the antenna in both reflection and transmission modes, using a custom reader constructed from laboratory equipment. A transverse read range of 0.5 m is obtained using commercial off-the-shelf RFID cards with 10 W RF power, with high uniformity along the length of the antenna.
- 9 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 5 (2) , 148-153
Magneto-Inductive HF RFID System
Efforts to increase read range in passive HF RFID systems are hampered by the poor range scaling law of inductive coupling. An alternative approach to enlarging capture volume—increasing the lateral extent of the antenna—is proposed, using a magneto-inductive (MI) travelling wave arrangement to allow larger antenna sizes. A theory of load modulation in MI systems is first presented, together with field simulations in the capture volume. A 2.3 metre-long MI antenna is then constructed, and an active tag emulator is used to demonstrate load modulation. RFID is then demonstrated, with the antenna in both reflection and transmission modes, using a custom reader constructed from laboratory equipment. A transverse read range of 0.5 m is obtained using commercial off-the-shelf RFID cards with 10 W RF power, with high uniformity along the length of the antenna.
- 16 September 2019
- Published by IOP Publishing in Journal of Optics
- Vol. 21 (10) , 105002
Junctions between two-dimensional plasmonic waveguides in the presence of retardation
Plasmons in two-dimensional (2D) waveguides are traditionally analysed within the electrostatic approximation, which assumes that the plasmon phase velocity is much smaller than the velocity of light. However, novel effects have recently been demonstrated for plasmons whose velocity is comparable to the velocity of light. In this retardation regime, electrostatic models are inaccurate. For a junction between two plasmonic waveguides, we present an analytical and a numerical model both valid in the retardation regime and compare them to an electrostatic model. We quantify the reflected and transmitted powers and the radiation loss in several scenarios. We found that power is radiated from a junction at the expense of the power of the reflected plasmon, but retardation has little effect on the phases of the reflected and transmitted plasmons. The radiation loss is typically below several percent when the plasmon velocities are five or more times below the light velocity. However, radiation still persists for slower plasmon velocities for a junction between a 2D waveguide and a perfectly conducting sheet. As a result, retardation is expected to degrade the quality factors of plasmonic resonators without affecting their eigenfrequencies.
- 16 September 2019
- Published by IOP Publishing in Journal of Optics
- Vol. 21 (10) , 105002
Junctions between two-dimensional plasmonic waveguides in the presence of retardation
Plasmons in two-dimensional (2D) waveguides are traditionally analysed within the electrostatic approximation, which assumes that the plasmon phase velocity is much smaller than the velocity of light. However, novel effects have recently been demonstrated for plasmons whose velocity is comparable to the velocity of light. In this retardation regime, electrostatic models are inaccurate. For a junction between two plasmonic waveguides, we present an analytical and a numerical model both valid in the retardation regime and compare them to an electrostatic model. We quantify the reflected and transmitted powers and the radiation loss in several scenarios. We found that power is radiated from a junction at the expense of the power of the reflected plasmon, but retardation has little effect on the phases of the reflected and transmitted plasmons. The radiation loss is typically below several percent when the plasmon velocities are five or more times below the light velocity. However, radiation still persists for slower plasmon velocities for a junction between a 2D waveguide and a perfectly conducting sheet. As a result, retardation is expected to degrade the quality factors of plasmonic resonators without affecting their eigenfrequencies.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Radiation from junctions between two-dimensional plasmonic waveguides
Two-dimensional electron systems supporting plasmons may be used for detection and generation of terahertz radiation. Such devices are often made of multiple sections two-dimensional waveguides with different electron densities or chemical potentials [1, 2]. The junction formed by two different waveguides, Fig. 1(a), will scatter a plasmon incident upon it, establishing the frequency response of the device.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Radiation from junctions between two-dimensional plasmonic waveguides
Two-dimensional electron systems supporting plasmons may be used for detection and generation of terahertz radiation. Such devices are often made of multiple sections two-dimensional waveguides with different electron densities or chemical potentials [1, 2]. The junction formed by two different waveguides, Fig. 1(a), will scatter a plasmon incident upon it, establishing the frequency response of the device.