Lucian A. Constantin
Research Subjects
Lucian A. Constantin has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Fabio Della Sala
Institute for Microelectronics and Microsystems (CNR-IMM) 1 , Via Monteroni, Campus Unisalento, 73100 Lecce
43 shared publications - Eduardo Fabiano
Institute for Microelectronics and Microsystems (CNR-IMM), Via Monteroni, Campus Unisalento, 73100 Lecce, Italy
28 shared publications - Subrata Jana
Institute of Physics, Faculty of Physics, Astronomy and Informatics, Nicolaus Copernicus University in Toruń 1 , ul. Grudziądzka 5, 87-100 Toruń
20 shared publications - Prasanjit Samal
National Institute of Science Education and Research
19 shared publications John P. Perdew
15 shared publications- Szymon Śmiga
Institute of Physics, Faculty of Physics, Astronomy and Informatics, Nicolaus Copernicus University in Toruń, ul. Grudziadzka 5, 87-100 Toruń, Poland
14 shared publications
Latest Publications
- Open Access
- 23 September 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (12)
Kinetic and exchange energy semilocal functionals derived from model potentials by Q -path integration
Model exchange, exchange–correlation, and kinetic potentials are still useful in solid-state and quantum chemistry electronic structure calculations, even if they violate important exact conditions, such as the translational and rotational invariance. Moreover, the energy of model potentials is ill-defined, as it is dependent on the path-integral. We show that the Q-path integral given by the homogeneous density scaling, nλ(r) = λn(r), is related to the gauge of the semilocal functionals in the slowly-varying density regime. This fact makes the Q-path integral a useful method for developing density functionals for solid-state systems. To prove this statement, we construct generalized gradient approximation kinetic and exchange energy functionals, starting from simple model potentials and using the Q-path approach. We test these functionals for several equilibrium properties of bulk solids.
- 23 September 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 165 (12)
Open AccessKinetic and exchange energy semilocal functionals derived from model potentials by Q -path integration
Model exchange, exchange–correlation, and kinetic potentials are still useful in solid-state and quantum chemistry electronic structure calculations, even if they violate important exact conditions, such as the translational and rotational invariance. Moreover, the energy of model potentials is ill-defined, as it is dependent on the path-integral. We show that the Q-path integral given by the homogeneous density scaling, nλ(r) = λn(r), is related to the gauge of the semilocal functionals in the slowly-varying density regime. This fact makes the Q-path integral a useful method for developing density functionals for solid-state systems. To prove this statement, we construct generalized gradient approximation kinetic and exchange energy functionals, starting from simple model potentials and using the Q-path approach. We test these functionals for several equilibrium properties of bulk solids.
- Open Access
- 10 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (25) , 6919-6930
Adiabatic Connection Correlation Functionals in Metallic Solids from Hartree–Fock Gaussian Basis Set Ground State
Adiabatic Connection Integrand Interpolation (ACII) methods, which mix the Görling-Levy second-order perturbation theory (GL2) correlation with density functionals from the strong interaction regime, have been successfully applied to molecular systems, strongly correlated systems, as well as the uniform electron gas (UEG). Here, we consider real metallic solids, including transition metals, where the GL2 term diverges. We tested different ACII approaches, with increased accuracy in reproducing the UEG correlation, and with different strong interaction functionals within the Point-charge-plus-Continuum (PC) model. Calculations are based on the Hartree–Fock (HF) ground state, which has been obtained with a Gaussian Type Orbital basis set, properly reoptimized toward the HF global minimum, with a derivative-free approach introduced here. We compare different metallic properties such as lattice constants, cohesive energies, and bulk total correlation energies with accurate reference results and state-of-the-art Density Functional Theory (DFT) approaches. We found that only the ACII approach with high accuracy for the UEG, namely, the Density Parameter Interpolation (DPI), and with the strong interaction functional reproducing the exact PC model for the Wigner crystal yields a correct second-order gradient-expansion correlation coefficient. This allows reproducing lattice constants and bulk correlation energies with an accuracy comparable to the best state-of-the-art approaches. When DPI is combined with GL2 correlation of atoms, accurate cohesive energies are obtained without error cancellation, which is common in DFT methods.
- 10 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (25) , 6919-6930
Open AccessAdiabatic Connection Correlation Functionals in Metallic Solids from Hartree–Fock Gaussian Basis Set Ground State
Adiabatic Connection Integrand Interpolation (ACII) methods, which mix the Görling-Levy second-order perturbation theory (GL2) correlation with density functionals from the strong interaction regime, have been successfully applied to molecular systems, strongly correlated systems, as well as the uniform electron gas (UEG). Here, we consider real metallic solids, including transition metals, where the GL2 term diverges. We tested different ACII approaches, with increased accuracy in reproducing the UEG correlation, and with different strong interaction functionals within the Point-charge-plus-Continuum (PC) model. Calculations are based on the Hartree–Fock (HF) ground state, which has been obtained with a Gaussian Type Orbital basis set, properly reoptimized toward the HF global minimum, with a derivative-free approach introduced here. We compare different metallic properties such as lattice constants, cohesive energies, and bulk total correlation energies with accurate reference results and state-of-the-art Density Functional Theory (DFT) approaches. We found that only the ACII approach with high accuracy for the UEG, namely, the Density Parameter Interpolation (DPI), and with the strong interaction functional reproducing the exact PC model for the Wigner crystal yields a correct second-order gradient-expansion correlation coefficient. This allows reproducing lattice constants and bulk correlation energies with an accuracy comparable to the best state-of-the-art approaches. When DPI is combined with GL2 correlation of atoms, accurate cohesive energies are obtained without error cancellation, which is common in DFT methods.
- 12 February 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (8)
Restoring the point-and-charge gradient expansion for strong interaction density functionals
- 12 February 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (8)
Restoring the point-and-charge gradient expansion for strong interaction density functionals
- Open Access
- 25 August 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (8)
Semilocal Pauli kinetic potential for orbital-free density functional theory, with an application to jellium clusters
The kinetic energy (KE) functional development has been a well-established research field for several decades, but there are only a few studies that considered the KE Pauli potential as the main quantity and developed approximations for it. In this work, we follow this unconventional path and construct the Direct Semilocal-Laplacian Potential (DSLP) Pauli potential approximation that satisfies important exact conditions, such as an accurate linear response of the uniform electron gas at small wave vectors and a realistic asymptotic decay outside of the jellium spheres in the vacuum. We performed orbital-free density functional theory (OFDFT) calculations for jellium clusters, which are accurate models for real metal clusters. We also investigated the response to external, time-independent perturbations. In general, the DSLP Pauli potential significantly enhances the accuracy of OFDFT calculations compared to the popular second-order KE gradient expansion and the Thomas–Fermi–Weizsäcker functional. Thus, the DSLP Pauli potential can be further applied to real applications of metal nanoparticles.
- 25 August 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (8)
Open AccessSemilocal Pauli kinetic potential for orbital-free density functional theory, with an application to jellium clusters
The kinetic energy (KE) functional development has been a well-established research field for several decades, but there are only a few studies that considered the KE Pauli potential as the main quantity and developed approximations for it. In this work, we follow this unconventional path and construct the Direct Semilocal-Laplacian Potential (DSLP) Pauli potential approximation that satisfies important exact conditions, such as an accurate linear response of the uniform electron gas at small wave vectors and a realistic asymptotic decay outside of the jellium spheres in the vacuum. We performed orbital-free density functional theory (OFDFT) calculations for jellium clusters, which are accurate models for real metal clusters. We also investigated the response to external, time-independent perturbations. In general, the DSLP Pauli potential significantly enhances the accuracy of OFDFT calculations compared to the popular second-order KE gradient expansion and the Thomas–Fermi–Weizsäcker functional. Thus, the DSLP Pauli potential can be further applied to real applications of metal nanoparticles.
- Open Access
- 4 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (32) , 8198-8208
Simplified, Physically Motivated, and Broadly Applicable Range-Separation Tuning
Range-separated hybrid (RSH) functionals with "ionization energy" and/or "optimal tuning" of the screening parameter have proven to be among the most practical and accurate approaches for describing excited-state properties across a wide range of systems, including condensed matter. However, this method typically requires multiple self-consistent calculations and can become computationally expensive and unstable, particularly for extended systems. In this work, we propose a very simple and efficient alternative approach to determine the screening parameter for RSH functionals solely on the basis of the total electron density of the system and the compressibility sum rule of density functional theory (DFT). This effective screening parameter achieves remarkable accuracy, particularly for charge-transfer excitations, surpassing the performance of previously suggested alternatives. Because it relies on only the electron density, the proposed approach is physically transparent and highly practical to automate DFT calculations in large and complex systems, including bulk solids, where "tuning" is not possible.
- 4 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (32) , 8198-8208
Open AccessSimplified, Physically Motivated, and Broadly Applicable Range-Separation Tuning
Range-separated hybrid (RSH) functionals with "ionization energy" and/or "optimal tuning" of the screening parameter have proven to be among the most practical and accurate approaches for describing excited-state properties across a wide range of systems, including condensed matter. However, this method typically requires multiple self-consistent calculations and can become computationally expensive and unstable, particularly for extended systems. In this work, we propose a very simple and efficient alternative approach to determine the screening parameter for RSH functionals solely on the basis of the total electron density of the system and the compressibility sum rule of density functional theory (DFT). This effective screening parameter achieves remarkable accuracy, particularly for charge-transfer excitations, surpassing the performance of previously suggested alternatives. Because it relies on only the electron density, the proposed approach is physically transparent and highly practical to automate DFT calculations in large and complex systems, including bulk solids, where "tuning" is not possible.
- Open Access
- 26 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (13) , 3378-3388
Nonempirical Adiabatic Connection Correlation Functional from Hartree–Fock Orbitals
We present a nonempirical strategy to construct a correlation functional rooted in the Møller-Plesset (MP) adiabatic connection (AC) formalism for the strong-interaction regime, which satisfies both the weak- and strong-interaction limits and describes accurately the uniform electron gas (UEG) model. The functional is based on Hartree-Fock (HF) orbitals and employs only the UEG and helium atom as model systems; thus, it can be considered a nonempirical and nonlinear generalization of post-HF approaches based on the second-order perturbation theory (MP2) correlation. The functional describes the correlation of atoms with 1 mHa/electron accuracy, and it is also accurate for jellium surface energies. Accurate tests using a nearly complete basis set on diverse systems and properties (atomization/interaction energies, dispersion forces, and ionization potentials) have shown an excellent performance of the functional that corrects the MP2 overbinding without error cancellation. The present investigation can open the way for the development of a new generation of post-HF functionals based on nonlinear MP2 contributions and strong-correlation ingredients.
- 26 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (13) , 3378-3388
Open AccessNonempirical Adiabatic Connection Correlation Functional from Hartree–Fock Orbitals
We present a nonempirical strategy to construct a correlation functional rooted in the Møller-Plesset (MP) adiabatic connection (AC) formalism for the strong-interaction regime, which satisfies both the weak- and strong-interaction limits and describes accurately the uniform electron gas (UEG) model. The functional is based on Hartree-Fock (HF) orbitals and employs only the UEG and helium atom as model systems; thus, it can be considered a nonempirical and nonlinear generalization of post-HF approaches based on the second-order perturbation theory (MP2) correlation. The functional describes the correlation of atoms with 1 mHa/electron accuracy, and it is also accurate for jellium surface energies. Accurate tests using a nearly complete basis set on diverse systems and properties (atomization/interaction energies, dispersion forces, and ionization potentials) have shown an excellent performance of the functional that corrects the MP2 overbinding without error cancellation. The present investigation can open the way for the development of a new generation of post-HF functionals based on nonlinear MP2 contributions and strong-correlation ingredients.
- 1 October 2024
- Published by American Physical Society (APS) in Physical Review A
- Vol. 110 (4)
Airy-gas plasmons
- 1 October 2024
- Published by American Physical Society (APS) in Physical Review A
- Vol. 110 (4)
Airy-gas plasmons
- Open Access
- 14 June 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (23) , 235129
Towards adiabatic-connection interpolation model with broader applicability
The adiabatic connection integrand interpolation (ACII) method represents a general path for calculating correlation energies in electronic systems within the density functional theory. ACII functionals include both exact-exchange and the second-order correlation energy, as well as an interpolating function toward the strictly correlated electron (SCE) regime. Several interpolating functions have been proposed in the last years targeting different properties, yet an accurate ACII approach with broad applicability is still missing. Recently, we have proposed an ACII functional that was made accurate for the three-dimensional (3D) uniform electron gas as well as for model metal clusters. In this paper we present an ACII functional (named genISI2), which is very accurate for both three-dimensional (3D) and two-dimensional (2D) uniform electron gases and for the quasi-2D infinite-barrier model, where most of the exchange-correlation functionals fail badly, as well as for strongly correlated two-electrons systems. Using the exact-exchange Kohn-Sham orbitals, we have also assessed the genISI2 for various molecular systems, showing a superior performance with respect to the other ACII methods for total energies, atomization energies, and ionization potentials. The genISI2 functional can thus find application in a broad range of systems and properties. Published by the American Physical Society 2024
- 14 June 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (23) , 235129
Open AccessTowards adiabatic-connection interpolation model with broader applicability
The adiabatic connection integrand interpolation (ACII) method represents a general path for calculating correlation energies in electronic systems within the density functional theory. ACII functionals include both exact-exchange and the second-order correlation energy, as well as an interpolating function toward the strictly correlated electron (SCE) regime. Several interpolating functions have been proposed in the last years targeting different properties, yet an accurate ACII approach with broad applicability is still missing. Recently, we have proposed an ACII functional that was made accurate for the three-dimensional (3D) uniform electron gas as well as for model metal clusters. In this paper we present an ACII functional (named genISI2), which is very accurate for both three-dimensional (3D) and two-dimensional (2D) uniform electron gases and for the quasi-2D infinite-barrier model, where most of the exchange-correlation functionals fail badly, as well as for strongly correlated two-electrons systems. Using the exact-exchange Kohn-Sham orbitals, we have also assessed the genISI2 for various molecular systems, showing a superior performance with respect to the other ACII methods for total energies, atomization energies, and ionization potentials. The genISI2 functional can thus find application in a broad range of systems and properties. Published by the American Physical Society 2024
- Open Access
- 27 December 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (24)
Adiabatic connection interaction strength interpolation method made accurate for the uniform electron gas
The adiabatic connection interaction strength interpolation (ISI)-like method provides a high-level expression for the correlation energy, being, in principle, exact not only in the weak-interaction limit, where it recovers the second-order Görling–Levy perturbation term, but also in the strong-interaction limit that is described by the strictly correlated electron approach. In this work, we construct a genISI functional made accurate for the uniform electron gas, a solid-state physics paradigm that is a very difficult test for ISI-like correlation functionals. We assess the genISI functional for various jellium spheres with the number of electrons Z ≤ 912 and for the non-relativistic noble atoms with Z ≤ 290. For the jellium clusters, the genISI is remarkably accurate, while for the noble atoms, it shows a good performance, similar to other ISI-like methods. Then, the genISI functional can open the path using the ISI-like method in solid-state calculations.
- 27 December 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (24)
Open AccessAdiabatic connection interaction strength interpolation method made accurate for the uniform electron gas
The adiabatic connection interaction strength interpolation (ISI)-like method provides a high-level expression for the correlation energy, being, in principle, exact not only in the weak-interaction limit, where it recovers the second-order Görling–Levy perturbation term, but also in the strong-interaction limit that is described by the strictly correlated electron approach. In this work, we construct a genISI functional made accurate for the uniform electron gas, a solid-state physics paradigm that is a very difficult test for ISI-like correlation functionals. We assess the genISI functional for various jellium spheres with the number of electrons Z ≤ 912 and for the non-relativistic noble atoms with Z ≤ 290. For the jellium clusters, the genISI is remarkably accurate, while for the noble atoms, it shows a good performance, similar to other ISI-like methods. Then, the genISI functional can open the path using the ISI-like method in solid-state calculations.
- Open Access
- 18 September 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (11)
Density functional applications of jellium with a local gap model correlation energy functional
We develop a realistic density functional approximation for the local gap, which is based on a semilocal indicator that shows good screening properties. The local band model has remarkable density scaling behaviors and works properly for the helium isoelectronic series for the atoms of the Periodic Table, as well as for the non-relativistic noble atom series (up to 2022 e−). Due to these desirable properties, we implement the local gap model in the jellium-with-gap correlation energy, developing the local-density-approximation-with-gap correlation functional (named LDAg) that correctly gives correlation energies of atoms comparable with the LDA ones but shows an improvement for ionization potential of atoms and molecules. Thus, LDAg seems to be an interesting and useful tool in density functional theory.
- 18 September 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (11)
Open AccessDensity functional applications of jellium with a local gap model correlation energy functional
We develop a realistic density functional approximation for the local gap, which is based on a semilocal indicator that shows good screening properties. The local band model has remarkable density scaling behaviors and works properly for the helium isoelectronic series for the atoms of the Periodic Table, as well as for the non-relativistic noble atom series (up to 2022 e−). Due to these desirable properties, we implement the local gap model in the jellium-with-gap correlation energy, developing the local-density-approximation-with-gap correlation functional (named LDAg) that correctly gives correlation energies of atoms comparable with the LDA ones but shows an improvement for ionization potential of atoms and molecules. Thus, LDAg seems to be an interesting and useful tool in density functional theory.