CLChao Lai

Chao Lai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chao Lai has a total of 214 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Three-dimensional scaffold-supported hydrogel electrolytes with integrated high conductivity and stability for robust zinc-ion batteries

    by Yulin Liu, Jiaxing Yang, Jie Qu, Hongliu Dai, Chao Lai

    Hydrogel electrolytes (HGEs) have emerged as promising electrolytes for zinc-ion batteries (ZIBs), owing to their favorable mechanical strength, ionic conductivity, and interfacial stability. However, simultaneously achieving these mutually conflicting properties remains a key issue that hinders their rapid development. Herein, we propose a molecular-scale strategy to precisely balance these mutually conflicting properties in HGEs using sucrose and choline chloride. Our findings reveal that the synergistically modified HGE, achieving a high hydrogen production inhibition rate of 97.2%, high ionic conductivity of 17.71 mS·cm−1, high mechanical properties (strength of 278.07 kPa, elongation of 463.62%), enabling the Zn anode to reach an average Coulombic efficiency (CE) of 99.16% over 700 cycles and maintain highly reversible cycling for up to 1300 h at a high current density of 5 mA·cm−2. This study presents a promising strategy for developing a green, high-performance HGE, which is expected to accelerate the practical implementation of ZIBs.

  • Open Access

    Designing Strategies of Electrolyte Additive Formula for Highly Stable Lithium Metal Batteries

    by Tingxuan Tang, Zhenzhen Wu, Chuang Sun, Chao Lai

    For the resurgence and commercialization of lithium-metal batteries (LMBs), functional electrolytes play an important role in mitigating critical challenges, such as dendritic growth on the lithium (Li) anode, capacity degradation at the cathode, and the decomposition of the electrolyte. Modifying electrolyte additives promises a practical, accessible, and cost-competitive approach to fine control the critical electrode interface reactions including Li deposition and solid electrolyte interphase/cathode electrolyte interphase (SEI/CEI) formation. Here, we summarize the state-of-the-art electrolyte additives and their mechanism in inducing the Li deposition and SEI/CEI film formation. Based on our previous work, we prospectively propose rational designing strategies of electrolyte formula, i.e., compound electrolytes, via combining film-forming additives and leveling additives, to comprehensively and continuously tuning the film formation, film properties, and Li deposition layer throughout the long-term cycling. We hope the proposed design strategies could promote the advancement of electrolyte engineering in the commercialization of high-energy LMBs.

  • Open Access

    A Bifunctional Organosilane Additive for Dynamic pH Regulation and Interfacial Protection in Aqueous Zinc‐Ion Batteries

    by Lina Pan, Haiyang Wu, Peng Huang, Boyu Yuan, Chao Lai, Yaqian Lan

    Aqueous zinc‐ion batteries exhibit considerable potential for use in grid‐scale energy storage. However, issues such as zinc dendrite growth and the occurrence of the hydrogen evolution reaction have limited their development. To address these challenges, this study develop Ormosil, a water‐soluble organosilane additive for the electrolyte. In the electrolyte, Ormosil forms Si─O─Zn bonds with the zinc foil, thereby helping to protect the electrode from corrosion reactions. Moreover, on the electrode surface, it facilitates the formation of a solid‐electrolyte‐interphase layer, enabling rapid zinc‐ion transport kinetics. Notably, the hydrophilicity of the organosilane is enhanced by the introduction of ─NH 2 groups. Furthermore, the ─NH 2 groups can bind to zinc ions and become part of their solvation shell; this incorporation helps suppress the hydrogen evolution reaction. Consequently, the single additive Ormosil provides both electrode protection and solvent restructuring. The cell using Ormosil additive exhibited excellent cycling stability (10 mA cm −2 , 1000 h), a high average coulombic efficiency (CE = 99.74%), and a full cell with NVO cathode demonstrated high capacity retention (76.60%), superior to ZnSO 4 (51.08%).


  • Open Access

    Self‐Regulated Gradient Hydrogel Electrolyte with Ultrafast Ion Channels for Robust Zinc‐Ion Batteries

    by Shuang Zhang, Ming Zhang, Ying Wang, Xiaobin Wu, Chao Lai

    Hydrogel electrolytes are crucial for advancing safe and flexible aqueous zinc‐ion batteries. However, conventional homogeneous hydrogels suffer a trade‐off between fast Zn 2+ transport and stable Zn/electrolyte interfaces. Herein, we report a surface energy‐driven self‐regulated gradient hydrogel electrolyte (SRG‐HE) that resolves this conflict via a spatially modulated polymer network. The SRG‐HE shows dense layers at the Zn/SRG‐HE interfaces provide robust passivation, while a low‐density bulk supports rapid Zn 2+ diffusion. During in situ polymerization, amphiphilic Triton X‐100 induces spontaneous component migration and surface enrichment, forming a symmetric surface–bulk–surface gradient. The dense surface layers suppress free‐water activity to stabilize interfaces, whereas the hydrated bulk delivers high ionic conductivity (97.7 mS cm − 1 ). Polar groups in SRG‐HE further immobilize OTf − , enabling selective Zn 2+ transport with a high transference number of 0.88. Consequently, Zn||Zn cells cycle stably for 1365 h at 4 mA cm − 2 with uniform (002)‐textured deposition. When paired with V 2 O 5 cathodes, the full cells maintain a reversible capacity of 234 mAh g − 1 after 2000 cycles at 1000 mA g − 1 , achieving near 100% Coulombic efficiency. Even under mechanical deformation, SRG‐HE‐based pouch cells retain functionality, underscoring their potential for durable, high‐performance energy storage systems.


  • Steering Three-Dimensional Li 2 S Deposition via a Janus-Structured Separator with a Dual-Ion/Electron-Conducting Interfacial Mediator for Low-Temperature Lithium–Sulfur Batteries

    by Wen Yan, Xiaoyue Li, Peng Liu, Chi Wang, Hanpei Liu, Chao Lai, Zhong Jin

    Lithium-sulfur (Li-S) batteries face critical challenges from sluggish sulfur redox kinetics, polysulfide shuttle, and lithium dendrite growth. Herein, a Janus-structured separator featuring a miscible polystyrene/poly(methyl methacrylate) (PSA) gel buffer layer and a cathode-facing single-layer coating of ordered mesoporous carbon (s-OMC) is prepared as both charge-carrier transport vehicle and electron transfer mediator. The PSA layer endows dendrite-free lithium deposition and physically isolates the conductive s-OMC from the anode to prevent short circuits. Meanwhile, s-OMC with parallel aligned nanochannels enhances Li+ diffusivity and supplies abundant electrons to steer controlled three-dimensional Li2S deposition. This dual-functional architecture effectively mitigates interfacial passivation and accelerates sulfur redox kinetics. Consequently, Li-S batteries based on the Janus-structured PP/PSA/s-OMC separator deliver exceptional electrochemical performances under practical conditions, including stable cycling at a high sulfur loading (5.3 mg cm-2 or 5.43 mAh cm-2), outstanding rate capability (704 mAh g-1 at 5 C), and remarkable low-temperature operation (922 mAh g-1 at -20 °C).


  • Green and Mass-Producible Biomass Separator with Nanoconfined Channels for Practical High-Performance Zinc-Ion Batteries

    by Ke Su, Yanyan Qin, Suhong Li, Jianyong Ren, Lin Li, Zhouyang Long, Lingdi Shen, Chao Lai

    Aqueous zinc-ion batteries hold significant importance in energy storage realms, yet the prevailing glass fiber (GF) separators suffer from high cost, excessive thickness, and poor mechanical property, which pose formidable challenges for widespread adoption. Herein, we propose a paradigm shift from a remedial to preventive design by engineering a truly scalable, low-cost, and eco-friendly separator. By hydrogelling sodium alginate (SA) on commercial weighing paper (WP) and in situ forming an "egg-box" structure, we construct a nanoconfined zinc alginate hydrogel-modified separator (ZAH-WP), whose cost is only 0.45% of the GF separator (USD $1.10 m-2 vs USD $244 m-2). Furthermore, the ZAH-WP separator reduces thickness from ∼841 μm (GF) to ∼188 μm and enhances mechanical strength to 51.62 MPa, 129 times that of the GF separator (∼0.40 MPa). Encouragingly, the Zn||ZAH-WP||Zn cell delivers stable cycling over 2510 h, and the Zn||ZAH-WP||Cu cell achieves an average coulombic efficiency of 99.50%, which outperforms the GF separator in overall electrochemical performance.


  • Atomic-Level Intercalation Strategy Enabling Ultrastable Subnanochannels for Long-Lifespan Zn-Ion Batteries

    by Peng Liu, Meijia Chen, Xue Ma, Jiayue Fan, Bencai Lin, Yuxuan Zhu, Minman Tong, Chao Lai

    Two-dimensional materials are widely used to construct interface protective coatings (IPCs) to suppress dendritic growth by facilitating uniform Zn2+ flux through their ordered ion transport channels. However, during the plating/stripping cycles, IPCs are subjected to solvent-induced swelling effects, leading to the rupture of IPCs and hindering the ordered deposition of zinc ions. Here, using MXene as a model, an atomic-level intercalation strategy was developed to construct an IPC with antiswelling properties and stable subnanometer channels. Metal ions are inserted into the MXene layers, effectively locking the layered structure through strong coordination interactions and electrostatic attraction. The atomic-level metal ions occupy minimal space, maximizing the utilization of MXene's interlayer channels. Among all of the screened metal ion-intercalated MXene membranes (M-MXMs), Al3+-MXM exhibits the best stable performance with only 0.5% static expansivity. The Al3+-MXM@Zn symmetric battery achieves a high Zn ion migration number of 0.75 and exhibits stable cycling at 2800 h under 1 mA cm-2, 1 mAh cm-2. The Al3+-MXM@Zn-I2 battery reserved a capacity retention rate of 83.5% after 10,000 cycles at 2 A g-1.


  • Boosting the practical applications of zinc-ion batteries via zwitterion-mediated solvation and interfacial chemistry

    by Xiaobin Wu, Shuang Zhang, Yimin Yang, Ying Wang, Qinghong Wang, Chao Lai

    Zwitterion-mediated synergy creates a self-regulating AZIB environment. It establishes a water-deficient electric double layer, regulates interfacial pH, and guides Zn 2+ flux, enhancing deposition reversibility and cycle life.


  • Composite Gel Electrolytes with Ion‐Mediated Compatibilization and Matrix‐Assisted Conduction for Wide‐Temperature Lithium Metal Batteries

    by Bingxin Qi, Chi Wang, Hanpei Liu, Xiaoyue Li, Wen Yan, Chao Lai

    Gel polymer electrolytes (GPEs) with solvent‐in‐polymer structure typically encounter a trade‐off between ionic conductivity and mechanical properties. This challenge has not been adequately addressed by conventional single‐material, miscible polymers, or polymer/ceramic composite electrolytes. Herein, the phase consistency of composite GPE matrix, which contains polymer blends of “soft” poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVHF) and “hard” polyether‐ether‐ketone (PEEK), is enhanced by ion‐mediated compatibilization through the incorporation of lithium sulfonate groups. In addition, the electrolyte's ionic environment is optimized by the pendent lithium sulfonate positioned at the interface between polymer‐rich and solvent‐rich domains, thus achieving high ionic conductivity of 1.87 mS cm −1 at 20 °C and 1.28 mS cm −1 at −20 °C via the matrix‐assisted conduction. As a consequence, the composite gel electrolyte confers the Li||LiFePO 4 battery with high discharge capacity of 157.0 mAh g −1 at 1 C and capacity retention of 90.7% after 1500 cycles, and superior electrochemical performance under harsh conditions, including high rate of 5 C (96.0% capacity retention after 1000 cycles), extreme temperatures from −20 °C to 80 °C, and in conjunction with 30‐µm lithium metal anode. This work advances the development of high‐performance gel polymer electrolytes through innovative nanostructure and molecule design.