KMKaruna Kara Mishra

Karuna Kara Mishra

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Karuna Kara Mishra has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhancing Polysulfide Redox Kinetics Through Synergistic Polarization of Ferroelectric (Ba0.9Sr0.1TiO3) Nanoparticles for High-Capacity Li-S Batteries.

    by Ivan Castillo, Balram Tripathi, Danilo Barrionuevo, Karuna K. Mishra, Gerardo Morell, Ram S. Katiyar

    We report on the role of synergistic polarization of Ba0.9Sr0.1TiO3 (BST) nanoparticles in sulfur cathodes to enhance the redox kinetics of polysulfides for high-capacity Li-S batteries. Ferroelectric nanoparticles are known to significantly improve the electrochemical performance of Li-S batteries due to their inherent self-polarization and high adsorption capacity towards polysulfides. X-ray diffraction spectra confirmed the tetragonal symmetry (c/a=1.0073), while Raman spectroscopic analysis validated the presence of tetragonal orientation Raman modes in BST-modified composites. Scanning electron microscope (SEM) images showed a homogeneous distribution of BST in the sulfur cathode system, with grain sizes ranging from 1 to 1.5 μm. Notably, the BST-coupled S50BST30CB10PVDF10 composite cathode achieved a capacity of approximately 820 mAh/g at 100 mA/g, maintaining stability over 100 cycles, demonstrating improved electrochemical performance. Two distinct plateaus between 2.3 V to 2.0 V and 2.0 V to 1.5 V further underscore the superior performance of BST ferroelectric nanoparticles in enhancing the redox kinetics of Li-S batteries. By leveraging the favourable affinity of polar substances towards polysulfides, we aimed to create a more stable reactive environment within the cathodic site, effectively trapping polysulfide intermediates through the synergistic polarization of BST nanoparticles. The synergistic polarization induced by the asymmetric crystal structure of ferroelectrics is anticipated to generate internal electric fields, enhancing chemisorption with heteropolar reactive. The observed high cyclic stability further validates the efficacy of these composite cathodes in mitigating the polysulfide shuttle effect, offering promising prospects for advancing Li-S battery technology.

  • Open Access

    Room-Temperature, Nanoscale Multiferroic Pb(Fe0.5Ta0.5)1−x(Zr0.53Ti0.47)xO3 (x = 0.2, 0.3) Thin Films Grown via the Pulsed Laser Deposition Technique

    by Dilsom A. Sanchez, Karuna Kara Mishra, Sujoy Saha, Gopalan Srinivasan, Ram S. Katiyar

    Multiferroic materials capable of robust magnetoelectric coupling at room temperature are currently being explored for their possible multifunctional device applications. Highly (100)-oriented Pb(Fe0.5Ta0.5)x(Zr0.53Ti0.47)1−x (PZTFTx) thin films (x = 0.2 and 0.3) with a thickness of about 300 nm were grown on La0.67Sr0.33CoO3 (LSCO)-buffered MgO 100-oriented substrates via the pulsed laser deposition method. An analysis of their X-ray diffraction patterns suggests the stabilization of the orthorhombic phase in the thin films at room temperature. Dielectric spectroscopic measurements of the metal–insulator–metal (Pt/PZTFTx/LSCO) thin-film capacitors as a function of temperature revealed a diffuse ferroelectric-to-paraelectric phase transition around Tm ~520 and 560 K for the x = 0.2 and 0.3 thin films, respectively. Well-saturated electrical hysteresis loops with large remanent (Pr) and saturation (Ps) polarizations were observed in these capacitors, which indicates the establishment of intrinsic ferroelectric ordering in the thin films at room temperature. These thin films retained ferromagnetic/ferrimagnetic ordering up to 300 K and showed saturation magnetization values of 8.3 (x = 0.2) and 6.1 (x = 0.3) emu/cm3 at room temperature. The magnetoelectric coupling constants of 2040 mV/cmOe (x = 0.2) and 850 mV/cmOe (x = 0.3), respectively, were obtained at an in-plane bias field at room temperature. The present study demonstrates that PZTFTx thin films are multiferroic at room temperature with large magnetoelectric couplings, and these materials may be suitable for use in magnetic sensors and spintronic device applications.


  • Open Access

    Phase Transition and Energy Storage Density in Lead-Free Ferroelectric Ba1−xSrxTiO3 (x = 0.1, 0.3, and 0.7) Capacitors

    by Ivan Castillo, Karuna Kara Mishra, Ram S. Katiyar

    Structure, phonon, and energy storage density in Sr2+-substituted lead-free ferroelectric Ba1−xSrxTiO3 (BSTx) for compositions x = 0.1, 0.3, and 0.7 were investigated using X-ray diffraction, Raman, and ferroelectric polarization measurements as a function of temperature. The samples were tetragonal for x = 0.1 with a large c/a ratio. The tetragonal anisotropy was decreased upon increasing x and transforming to cubic for x = 0.7. The changes in structural and ferroelectric properties were found to be related to the c/a ratios. The temperature-dependent phonon spectroscopy results indicated a decrease in tetragonal–cubic phase transition temperature, Tc, upon increasing x due to a reduction in the lattice anisotropy. The intensity of ~303 cm−1 E(TO2) mode decreased gradually with temperature and finally disappeared around the tetragonal ferroelectric to cubic paraelectric phase at about 100 ℃ and 40 ℃ for x = 0.1 and 0.3, respectively. A gradual reduction in the band gap Eg of BSTx with x was evident from the analysis of UV-visible absorption spectra. The energy storage density (Udis) of the ferroelectric capacitors for x = 0.7 was ~0.20 J/cm3 with an energy storage efficiency of ~88% at an applied electric field of 104.6 kV/cm. Nearly room temperature transition temperatures TC and reasonably fair energy storage density of the BSTx capacitors were found.


  • Pressure-Induced Phase Transition in Multilayered Vanadium Diselenide Nanosheets

    by K. K. Mishra, K. K. Pandey, Sree Raj K A, Chandra Sekhar Rout, T. R. Ravindran, Sharat Chandra, Ram S. Katiyar


  • Open Access

    Characterization of V2O3 Nanoscale Thin Films Prepared by DC Magnetron Sputtering Technique

    by Ivan Castillo, Karuna Kara Mishra, Ram S. Katiyar

    Vanadium sesquioxide V2O3, a transition metal oxide, is an important metal transition insulator due to its potential applications in novel electronic and memory devices. V2O3 thin films of thickness around 230 nm were grown on Si/SiO2/Ti/Pt substrates at deposition temperature of 723 K in a controlled Ar:O2 atmosphere of 35:2.5 sccm employing Direct Current (DC) magnetron sputtering. X-ray diffraction studies confirmed single phase of the material stabilized in corundum rhombohedral R3¯C phase. X-ray photoelectron spectroscopic results revealed chemical oxidation states are of V3+ and O2− and have nearly stochiometric elemental compositions in the films. Magnetization studies down to 10 K predicts a canted antiferromagnetic transition around 55 K. Out of 7 expected Raman active modes (2A1g + 5Eg), two A1g Raman active modes at 242 and 500 cm−1 were observed at ambient R3¯C phase. Temperature dependent Raman spectroscopic studies carried out from 80 to 300 K identified a monoclinic to rhombohedral phase transition at ~143 K.


  • Open Access

    Studies of Optical, Dielectric, Ferroelectric, and Structural Phase Transitions in 0.9[KNbO3]-0.1 [BaNi1/2Nb1/2O3−δ]

    by Blanca Yamile Rosas, Alvaro A. Instan, Karuna Kara Mishra, Srungarpu Nagabhusan Achary, Ram S. Katiyar

    The compound 0.9[KNbO3]-0.1[(BaNi1/2Nb1/2O3−δ] (KBNNO), a robust eco-friendly (lead-free) ferroelectric perovskite, has diverse applications in electronic and photonic devices. In this work, we report the dielectric, ferroelectric, and structural phase transitions behavior in the KBNNO compound using dielectric, X-ray diffraction, and Raman studies at ambient and as a function of temperature. Analyses of X-ray diffraction (XRD) data at room temperature (rtp) revealed the orthorhombic phase (sp. Gr. Amm2) of the compound with a minor secondary NiO cubic phase (sp. Gr. Fm3m). A direct optical band gap Eg of 1.66 eV was estimated at rtp from the UV–Vis reflectance spectrum analysis. Observation of non-saturated electric polarization loops were attributed to leakage current effects pertaining to oxygen vacancies in the compound. Magnetization studies showed ferromagnetism at room temperature (300 K) in this material. XRD studies on KBNNO at elevated temperatures revealed orthorhombic-to-tetragonal and tetragonal-to-cubic phase transitions at 523 and 713 K, respectively. Temperature-dependent dielectric response, being leaky, did not reveal any phase transition. Electrical conductivity data as a function of temperature obeyed Jonscher power law and satisfied the correlated barrier-hopping model, indicating dominance of the hopping conduction mechanism. Temperature-dependent Raman spectroscopic studies over a wide range of temperature (82–673 K) inferred the rhombohedral-to-orthorhombic and orthorhombic-to-tetragonal phase transitions at ~260, and 533 K, respectively. Several Raman bands were found to disappear, while a few Raman modes such as at 225, 270, 289, and 831 cm−1 exhibited discontinuity across the phase transitions at ~260 and 533 K.


  • Study on Soft Phonons and Mode Grüneisen Parameters in a Framework Material H3[Co(CN)6]

    by K. K. Mishra

    Last several years, the author has been involved in studies of phonons and their structure-properties correlation on several advanced functional materials that included not only flexible framework materials, Te-based oxides, and perovskites but also recently established low dimensional 2D materials, namely graphene, TiS3 nanosheet and nanofiber, VSe2 nanosheet, SnO2 nanoparticles. In this book chapter, the phonons and mode Grüneisen parameters of a flexible framework compound H3[Co(CN)6] is presented in an elaborate manner. H3[Co(CN)6] belongs to a class of flexible framework structured cyanides that exhibit negative thermal expansion along c-axis. In-situ high-pressure Raman spectroscopic studies on H3[Co(CN)6] in a diamond-anvil cell were carried out under hydrostatic pressure from ambient to 11 GPa. From the evolution of Raman spectra, splitting of bands and discontinuous changes in the pressure dependence of band frequencies, a phase transition from trigonal-monoclinic is identified at 2.3 GPa. In contrast to other bands, a lattice band at 140 cm-1 and the Co-CN deformation band at 348 cm-1 were soften with increase in pressure. Mode Grüneisen parameters (yi) were obtained for the ambient trigonal phase using the pressure dependencies of Raman mode frequencies (d\(\Omega\)/dP). Absence of Raman band with flat spectral feature was found as the compound amorphized around 11 GPa.

  • Study on Phonon Anharmonicity in a Framework Material H3[Co(CN)6]

    by K. K. Mishra

    Since last several years, the author has been studying the phonons on functional materials and has established structure-property correlations on flexible framework structure materials, lead free oxides, thin film perovskites, low dimensional 2D materials like graphene nanosheets, TiS3 nanofiber, VSe2 nanosheets, SnO2 quasi nanoparticles etc. In this book chapter, temperature dependent Raman spectroscopic studies on negative thermal expansion framework material H3[Co(CN)6] have been presented in the temperature range 80-300 K to elucidate the phonon anharmonicity of different phonons. No discontinuous or slope changes of phonon mode frequencies, linewidths and their band intensities were noticed suggesting that the compound was stable in the entire temperature range of investigation. Phonon anharmonicity models were used to analyse the temperature dependencies of mode frequencies and their linewidths. It was observed that the three-phonon decay process was dominant over the four-phonon process in this flexible compound. Concisely, the present study demonstrates the anharmonicity of the phonons and their correlation on thermal expansion of H3[Co(CN)6] framework material.

  • Progress in designing novel single-phase room temperature multiferroics

    by Ram S. Katiyar, K. K. Mishra

    Magnetoelectric multiferroics, because of their coupled electric and magnetic ordering in a single phase, are eminent for applications in logic and nonvolatile memory devices. Recent advances in computational modeling, synthesis, and characterization techniques are spurring significant advances in the study of these materials. During last several years, our group at University of Puerto Rico has been involved in synthesizing novel single-phase room temperature multiferroic materials that included not only solid solutions of lead zirconate titanate with lead iron tungstate, lead iron niobate, and lead iron tantalate, but also recently discovered palladium substituted room temperature multiferroics, namely PbPd0.3Ti0.7O3 and Pb(Zr0.2Ti0.8)Pd0.3O3. In this review, we have reported thin films of the above materials that were synthesized using pulsed laser deposition technique on various substrates at Speclab, University of Puerto Rico. We describe in detail thin film fabrication, structural diffraction analyses (XRD, TEM), dielectric, ferroelectric, piezo-response force microscopy, and magnetization results on recently grown Pd-substituted lead titanate and lead zirconate titanate thin films in an elaborate manner. The films were phase pure and stabilized in c-axis oriented tetragonal phase (P4mm) with surface roughness RQ of 2–4 nm. Temperature-dependent dielectric studies on metal-dielectric-metal heterostructure capacitors indicate that ferroelectric to paraelectric phase transition is above 500 K. A proof of ferroelectricity was confirmed from strong domain switching responses using piezo-response force microscopy. These films showed ferromagnetic ordering below 395 K. The origin of magnetic ordering in these materials was attributed to the existence of Pd2+ and Pd4+ mixed oxidation states of palladium dispersed in the polar matrices. We conclude with the above findings that these multiferroics may have potential applications.in nonvolatile memory and other multifunctional devices.