John R. Hayes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
John R. Hayes has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- David John Richardson
School of Biological Sciences, University of East Anglia, Norwich Research Park, Norwich NR4 7TJ, United Kingdom
11 shared publications - Francesco Poletti
University of Southampton
9 shared publications - Hesham Sakr
Optoelectronics Research Centre, University of Southampton, Southampton, U.K.
7 shared publications - Gregory T. Jasion
University of Southampton
4 shared publications - Radan Slavík
University of Southampton
4 shared publications - Thomas D. Bradley
Eindhoven University of Technology
4 shared publications
Latest Publications
- 15 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (14) , 4868
Correction to “Temperature Insensitive Delay-Line Fiber Interferometer Operating at Room Temperature” [Aug 22 5716-5721]
Unfortunately, we have made a mistake on the name of co-author and missed the DOI of our dataset. It would have no influence on any of our results, and the correct name and DOI are given here.
- 15 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (14) , 4868
Correction to “Temperature Insensitive Delay-Line Fiber Interferometer Operating at Room Temperature” [Aug 22 5716-5721]
Unfortunately, we have made a mistake on the name of co-author and missed the DOI of our dataset. It would have no influence on any of our results, and the correct name and DOI are given here.
- Open Access
- 7 August 2022
- Published by Wiley in Laser & Photonics Reviews
- Vol. 16 (11)
Stable Optical Frequency Comb Distribution Enabled by Hollow‐Core Fibers
Over the last two decades, optical frequency combs (OFCs) have enabled some of the most accurate measurements in physics. Distributing light from OFCs via optical fibers could make these high‐accuracy measurement tools available more widely, from a few dedicated metrology laboratories to other laboratories and industry. However, the performance of distributed OFCs is strongly limited by impairments of standard single mode fiber (SMF), most notably its thermal sensitivity of chromatic dispersion, for which no compensation technique has been shown to date. To overcome this limitation, use of a new class of optical fiber is suggested here: a hollow core fiber (HCF), which offers more than an order of magnitude lesser such impairment. The measured OFC frequency stability of the optical mode and mode spacing reaches 1.8 × 10−19 and 1.5 × 10−17 at a few thousand seconds, respectively, after transmitting through 7.7 km of HCF. To the best of knowledge, this is the best ever performance for km‐lengths of fiber‐based OFC distribution. Besides, other HCF advantages over SMF in this application are discussed. Specifically, HCFs offer over an order of magnitude lower thermal sensitivity of propagation delay, several orders of magnitude lower optical nonlinearity, and almost ten times lower chromatic dispersion.
- 7 August 2022
- Published by Wiley in Laser & Photonics Reviews
- Vol. 16 (11)
Open AccessStable Optical Frequency Comb Distribution Enabled by Hollow‐Core Fibers
Over the last two decades, optical frequency combs (OFCs) have enabled some of the most accurate measurements in physics. Distributing light from OFCs via optical fibers could make these high‐accuracy measurement tools available more widely, from a few dedicated metrology laboratories to other laboratories and industry. However, the performance of distributed OFCs is strongly limited by impairments of standard single mode fiber (SMF), most notably its thermal sensitivity of chromatic dispersion, for which no compensation technique has been shown to date. To overcome this limitation, use of a new class of optical fiber is suggested here: a hollow core fiber (HCF), which offers more than an order of magnitude lesser such impairment. The measured OFC frequency stability of the optical mode and mode spacing reaches 1.8 × 10−19 and 1.5 × 10−17 at a few thousand seconds, respectively, after transmitting through 7.7 km of HCF. To the best of knowledge, this is the best ever performance for km‐lengths of fiber‐based OFC distribution. Besides, other HCF advantages over SMF in this application are discussed. Specifically, HCFs offer over an order of magnitude lower thermal sensitivity of propagation delay, several orders of magnitude lower optical nonlinearity, and almost ten times lower chromatic dispersion.
- 3 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (16) , 5522-5529
DV-QKD Coexistence With 1.6 Tbps Classical Channels Over Hollow Core Fibre
The feasibility of coexisting a quantum channel with carrier-grade classical optical channels over Hollow Core Nested Antiresonant Nodeless Fibre (HC-NANF) is experimentally explored for the first time in terms of achievable quantum bit error rate (QBER), secret key rate (SKR) as well as classical signal bit error rates (BER). A coexistence transmission of 1.6 Tbps is achieved for the classical channels simultaneously with a quantum channel over a 2 km-long HC-NANF with a total coexistence power of 0 dBm. To find the best and worst wavelength position for the classical channels, we simulated different classical channels bands with different spacing between the quantum and classical channels considering the crosstalk generated from both Raman scattering and four-wave-mixing (FWM) on the quantum channel. Following our simulation, we numerically estimate the best (Raman spectrum dip) and worst locations (Raman spectrum peak) of the classical channel with respect to its impact on the performance on the quantum channel in terms of SKR and QBER. We further implemented a testbed to experimentally test both single-mode fibre (SMF) and HC-NANF in the best and worst-case scenarios. In the best-case scenario, the spacing between quantum and classical is 200 GHz (1.6 nm) with 50 GHz (0.4 nm) spacing between each classical channel. The SKR was preserved without any noticeable changes when coexisting the quantum channel with eight classical channels at 0 dBm total coexistence power in HC-NANF compared to a significant drop of 73% when using SMF at $-$ 24 dBm total coexistence power which is 250 times lower than the power used in HC-NANF. In the worst-case scenario using the same powers, and with 1 THz (8 nm) spacing between quantum and classical channels, the SKR dropped 10% using the HC-NANF, whereas in the SMF the SKR plummeted to zero.
- 3 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (16) , 5522-5529
DV-QKD Coexistence With 1.6 Tbps Classical Channels Over Hollow Core Fibre
The feasibility of coexisting a quantum channel with carrier-grade classical optical channels over Hollow Core Nested Antiresonant Nodeless Fibre (HC-NANF) is experimentally explored for the first time in terms of achievable quantum bit error rate (QBER), secret key rate (SKR) as well as classical signal bit error rates (BER). A coexistence transmission of 1.6 Tbps is achieved for the classical channels simultaneously with a quantum channel over a 2 km-long HC-NANF with a total coexistence power of 0 dBm. To find the best and worst wavelength position for the classical channels, we simulated different classical channels bands with different spacing between the quantum and classical channels considering the crosstalk generated from both Raman scattering and four-wave-mixing (FWM) on the quantum channel. Following our simulation, we numerically estimate the best (Raman spectrum dip) and worst locations (Raman spectrum peak) of the classical channel with respect to its impact on the performance on the quantum channel in terms of SKR and QBER. We further implemented a testbed to experimentally test both single-mode fibre (SMF) and HC-NANF in the best and worst-case scenarios. In the best-case scenario, the spacing between quantum and classical is 200 GHz (1.6 nm) with 50 GHz (0.4 nm) spacing between each classical channel. The SKR was preserved without any noticeable changes when coexisting the quantum channel with eight classical channels at 0 dBm total coexistence power in HC-NANF compared to a significant drop of 73% when using SMF at $-$ 24 dBm total coexistence power which is 250 times lower than the power used in HC-NANF. In the worst-case scenario using the same powers, and with 1 THz (8 nm) spacing between quantum and classical channels, the SKR dropped 10% using the HC-NANF, whereas in the SMF the SKR plummeted to zero.
- 24 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (16) , 5716-5721
Temperature Insensitive Delay-Line Fiber Interferometer Operating at Room Temperature
Environmental temperature fluctuations cause phase changes of the light propagating through optical fibers due to their thermal sensitivity. This limits the stability of fiber delay-line interferometers. Here, we present a thermally-insensitive fiber Mach-Zehnder interferometer. It consists of a hollow core fiber (HCF), which has a low thermal sensitivity coefficient, in one branch and a standard single-mode fiber with a thermal sensitivity coefficient about 25 times larger in the other. By setting their associated length ratio to approximately 25:1, the optical phase of the light in both arms changes by the same amount with temperature, making the difference in their optical paths insensitive to temperature and thus producing thermally-insensitive interference. As the thermal sensitivity coefficient of the optical fibers is itself slightly temperature dependent, exactly-zero sensitivity is achieved at a specific temperature only. We show how this zero-sensitivity temperature can be controlled via control of the relative fiber lengths in the two interferometer arms and set it to room temperature. Further, we show that our interferometer is over 100 times less sensitive to temperature than a single-mode fiber-based interferometer over temperature range as large as 25–50 °C. When considering a simple temperature control that keeps the interferometer within ±1 °C, the demonstrated interferometer achieves over 2000 times lower thermal sensitivity than a single-mode fiber-based interferometer and over 100 times lower sensitivity than an HCF-only based interferometer. Finally, we discuss how the thermal sensitivity of such interferometer depends on the light source wavelength.
- 24 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (16) , 5716-5721
Temperature Insensitive Delay-Line Fiber Interferometer Operating at Room Temperature
Environmental temperature fluctuations cause phase changes of the light propagating through optical fibers due to their thermal sensitivity. This limits the stability of fiber delay-line interferometers. Here, we present a thermally-insensitive fiber Mach-Zehnder interferometer. It consists of a hollow core fiber (HCF), which has a low thermal sensitivity coefficient, in one branch and a standard single-mode fiber with a thermal sensitivity coefficient about 25 times larger in the other. By setting their associated length ratio to approximately 25:1, the optical phase of the light in both arms changes by the same amount with temperature, making the difference in their optical paths insensitive to temperature and thus producing thermally-insensitive interference. As the thermal sensitivity coefficient of the optical fibers is itself slightly temperature dependent, exactly-zero sensitivity is achieved at a specific temperature only. We show how this zero-sensitivity temperature can be controlled via control of the relative fiber lengths in the two interferometer arms and set it to room temperature. Further, we show that our interferometer is over 100 times less sensitive to temperature than a single-mode fiber-based interferometer over temperature range as large as 25–50 °C. When considering a simple temperature control that keeps the interferometer within ±1 °C, the demonstrated interferometer achieves over 2000 times lower thermal sensitivity than a single-mode fiber-based interferometer and over 100 times lower sensitivity than an HCF-only based interferometer. Finally, we discuss how the thermal sensitivity of such interferometer depends on the light source wavelength.
- 28 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (3) , 813-820
Transmission of 61 C-Band Channels Over Record Distance of Hollow-Core-Fiber With L-Band Interferers
We report on two recirculating loop transmission experiments over a hollow-core fiber of the Nested-Antiresonant Nodeless type (NANF). We transmitted 61 channels in C-band at 32 GBaud, with either PM-QPSK or PM-16QAM modulation. In addition, 61 L-band interferers co-propagated in the NANF at all times, though they were not recirculated in the loop, to check for the presence of possible crosstalk effects between C and L-band in the NANF. The loop comprised the longest NANF transmission line yet constructed (7.72 km), as well as 55 km of PSCF needed to provide enough signal buffering and EDFA stabilization for the loop. The launch power into the PSCF was low enough to avoid generation of any significant non-linear noise. Using PM-QPSK, we achieved a record 618 km transmission in NANF (80 recirculations), at an overall average GMI of 3.44 bits/symb. Using PM-16QAM, we achieved a record 201 km transmission, at an overall average GMI of 7 bits/symb. We saw no adverse effect from the presence of L-band interferers in the NANF. If progress in the reduction of NANF loss and inter-modal interference continues at the rate of the last few years, these hollow-core fibers might become a promising alternative in the quest for next-generation higher-throughput fibers, given their theoretical potential of achieving low loss and ultra-low nonlinearity over ultra-wide bandwidths, ideally bringing about a many-fold increase in throughput per fiber.
- 28 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (3) , 813-820
Transmission of 61 C-Band Channels Over Record Distance of Hollow-Core-Fiber With L-Band Interferers
We report on two recirculating loop transmission experiments over a hollow-core fiber of the Nested-Antiresonant Nodeless type (NANF). We transmitted 61 channels in C-band at 32 GBaud, with either PM-QPSK or PM-16QAM modulation. In addition, 61 L-band interferers co-propagated in the NANF at all times, though they were not recirculated in the loop, to check for the presence of possible crosstalk effects between C and L-band in the NANF. The loop comprised the longest NANF transmission line yet constructed (7.72 km), as well as 55 km of PSCF needed to provide enough signal buffering and EDFA stabilization for the loop. The launch power into the PSCF was low enough to avoid generation of any significant non-linear noise. Using PM-QPSK, we achieved a record 618 km transmission in NANF (80 recirculations), at an overall average GMI of 3.44 bits/symb. Using PM-16QAM, we achieved a record 201 km transmission, at an overall average GMI of 7 bits/symb. We saw no adverse effect from the presence of L-band interferers in the NANF. If progress in the reduction of NANF loss and inter-modal interference continues at the rate of the last few years, these hollow-core fibers might become a promising alternative in the quest for next-generation higher-throughput fibers, given their theoretical potential of achieving low loss and ultra-low nonlinearity over ultra-wide bandwidths, ideally bringing about a many-fold increase in throughput per fiber.
- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2938-2943
High Spatial Density 6-Mode 7-Core Fiber Amplifier for L-Band Operation
We present a high spatial density space division multiplexed fiber amplifier (i.e., 6-mode 7-core multicore fiber amplifier) supporting 42 spatial channels. A high average modal gain of 23.1 dB is obtained in the L-band with an average differential modal gain of 3.2 dB and a minimum output power of 17.5 dBm per core per mode. The total power consumption of the amplifier is improved by a power reduction factor of 0.36 and a fully fiberized optical amplifier is realized in a cladding-pumped configuration. The assembled amplifier is then tested in a few-mode multicore fiber transmission link and simultaneously amplified 42 spatial channel fiber transmission is demonstrated with the highest spatial density and energy efficiency to date.
- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 2938-2943
High Spatial Density 6-Mode 7-Core Fiber Amplifier for L-Band Operation
We present a high spatial density space division multiplexed fiber amplifier (i.e., 6-mode 7-core multicore fiber amplifier) supporting 42 spatial channels. A high average modal gain of 23.1 dB is obtained in the L-band with an average differential modal gain of 3.2 dB and a minimum output power of 17.5 dBm per core per mode. The total power consumption of the amplifier is improved by a power reduction factor of 0.36 and a fully fiberized optical amplifier is realized in a cladding-pumped configuration. The assembled amplifier is then tested in a few-mode multicore fiber transmission link and simultaneously amplified 42 spatial channel fiber transmission is demonstrated with the highest spatial density and energy efficiency to date.
- 17 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (10) , 2849-2857
Multi-Band Direct-Detection Transmission Over an Ultrawide Bandwidth Hollow-Core NANF
In this paper, we report high-speed multi-band direct-detection (DD) transmission over a hollow-core nested antiresonant nodeless fiber (NANF). Thanks to the ultrawide bandwidth of the NANF, we demonstrate dual-band transmission across the O- and C-bands over a ~1-km length of a hollow-core fiber for the first time. Eight wavelength-division multiplexed (WDM) channels were transmitted using 100-Gb/s/λ Nyquist 4-ary pulse-amplitude modulation (PAM4) signals, which to the best of our knowledge, is the highest aggregate capacity ever transmitted in a DD hollow-core fiber-based transmission system. Optical pre-amplification was adopted for signal reception in both bands, achieved using an in-house built bismuth-doped optical fibre amplifier (BDFA) and a commercial erbium-doped fiber amplifier (EDFA) in the O- and C-band, respectively. We further demonstrate beyond 100-Gb/s/λ adaptively-loaded discrete multitone (DMT) transmission over the S+C+L-bands using the same NANF, without the use of optical amplification. Our experiments show that apart from fiber loss, the use of the NANF did not introduce any additional transmission penalties. The demonstrated results validate the ultrawide bandwidth and excellent modal purity of the fabricated NANF, which allow beyond 100-Gb/s/λ penalty-free transmission over multiple bands, highlighting the potential of this fiber technology for high-speed short- to intermediate-reach applications.
- 17 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (10) , 2849-2857
Multi-Band Direct-Detection Transmission Over an Ultrawide Bandwidth Hollow-Core NANF
In this paper, we report high-speed multi-band direct-detection (DD) transmission over a hollow-core nested antiresonant nodeless fiber (NANF). Thanks to the ultrawide bandwidth of the NANF, we demonstrate dual-band transmission across the O- and C-bands over a ~1-km length of a hollow-core fiber for the first time. Eight wavelength-division multiplexed (WDM) channels were transmitted using 100-Gb/s/λ Nyquist 4-ary pulse-amplitude modulation (PAM4) signals, which to the best of our knowledge, is the highest aggregate capacity ever transmitted in a DD hollow-core fiber-based transmission system. Optical pre-amplification was adopted for signal reception in both bands, achieved using an in-house built bismuth-doped optical fibre amplifier (BDFA) and a commercial erbium-doped fiber amplifier (EDFA) in the O- and C-band, respectively. We further demonstrate beyond 100-Gb/s/λ adaptively-loaded discrete multitone (DMT) transmission over the S+C+L-bands using the same NANF, without the use of optical amplification. Our experiments show that apart from fiber loss, the use of the NANF did not introduce any additional transmission penalties. The demonstrated results validate the ultrawide bandwidth and excellent modal purity of the fabricated NANF, which allow beyond 100-Gb/s/λ penalty-free transmission over multiple bands, highlighting the potential of this fiber technology for high-speed short- to intermediate-reach applications.
- Open Access
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (1) , 159-165
Interband Short Reach Data Transmission in Ultrawide Bandwidth Hollow Core Fiber
We report a Nested Antiresonant Nodeless hollow-core Fiber (NANF) operating in the first antiresonant passband. The fiber has an ultrawide operational bandwidth of 700 nm, spanning the 1240–1940 nm wavelength range that includes the O-, S-, C- and L- telecoms bands. It has a minimum loss of 6.6 dB/km at 1550 nm, a loss ≤ 7 dB/km between 1465–1655 nm and ≤ 10 dB/km between 1297–1860 nm. By splicing together two structurally matched fibers and by adding single mode fiber (SMF) pigtails at both ends we have produced a ~1 km long span. The concatenated and connectorized fiber has an insertion loss of approximately 10 dB all the way from 1300 nm to 1550 nm, and an effectively single mode behavior across the whole spectral range. To test its data transmission performance, we demonstrate 50-Gb/s OOK data transmission across the O- to L-bands without the need for optical amplification, with bit-error-rates (BERs) lower than the 7% forward error correction (FEC) limit. With the help of optical amplification, 100-Gb/s PAM4 transmission with BER lower than the KP4 FEC limit was also achieved in the O/E and C/L bands, with relatively uniform performance for all wavelengths. Our results confirm the excellent modal purity of the fabricated fiber across a broad spectral range, and highlight its potential for wideband, low nonlinearity, low latency data transmission.
- 23 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (1) , 159-165
Open AccessInterband Short Reach Data Transmission in Ultrawide Bandwidth Hollow Core Fiber
We report a Nested Antiresonant Nodeless hollow-core Fiber (NANF) operating in the first antiresonant passband. The fiber has an ultrawide operational bandwidth of 700 nm, spanning the 1240–1940 nm wavelength range that includes the O-, S-, C- and L- telecoms bands. It has a minimum loss of 6.6 dB/km at 1550 nm, a loss ≤ 7 dB/km between 1465–1655 nm and ≤ 10 dB/km between 1297–1860 nm. By splicing together two structurally matched fibers and by adding single mode fiber (SMF) pigtails at both ends we have produced a ~1 km long span. The concatenated and connectorized fiber has an insertion loss of approximately 10 dB all the way from 1300 nm to 1550 nm, and an effectively single mode behavior across the whole spectral range. To test its data transmission performance, we demonstrate 50-Gb/s OOK data transmission across the O- to L-bands without the need for optical amplification, with bit-error-rates (BERs) lower than the 7% forward error correction (FEC) limit. With the help of optical amplification, 100-Gb/s PAM4 transmission with BER lower than the KP4 FEC limit was also achieved in the O/E and C/L bands, with relatively uniform performance for all wavelengths. Our results confirm the excellent modal purity of the fabricated fiber across a broad spectral range, and highlight its potential for wideband, low nonlinearity, low latency data transmission.
- Open Access
- 25 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1213-1219
Lotus-Shaped Negative Curvature Hollow Core Fiber With 10.5 dB/km at 1550 nm Wavelength
We present a novel Lotus shaped negative curvature antiresonant hollow core fiber with the potential for low loss and very wide bandwidth. A minimum loss of ~10 dB/km at 1550 nm and less than 100 dB/km over a bandwidth of ~650 nm is demonstrated, with effectively single mode behaviour over lengths of a few tens of meters. We demonstrate power penalty free 10.5-Gbit/s data transmission through an 86 m length of fiber at both O and C telecom bands. The fiber macro bend sensitivity has also been tested, which is relevant for telecom as well as for other applications including beam delivery and gas based sensing. The bend loss is found to be below 0.2 dB/m for bend radii down to 8 cm at wavelengths away from the short wavelength edge of the transmission band.
- 25 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (5) , 1213-1219
Open AccessLotus-Shaped Negative Curvature Hollow Core Fiber With 10.5 dB/km at 1550 nm Wavelength
We present a novel Lotus shaped negative curvature antiresonant hollow core fiber with the potential for low loss and very wide bandwidth. A minimum loss of ~10 dB/km at 1550 nm and less than 100 dB/km over a bandwidth of ~650 nm is demonstrated, with effectively single mode behaviour over lengths of a few tens of meters. We demonstrate power penalty free 10.5-Gbit/s data transmission through an 86 m length of fiber at both O and C telecom bands. The fiber macro bend sensitivity has also been tested, which is relevant for telecom as well as for other applications including beam delivery and gas based sensing. The bend loss is found to be below 0.2 dB/m for bend radii down to 8 cm at wavelengths away from the short wavelength edge of the transmission band.
- 15 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 24 (3) , 1-9
Resonant SRS Filtering Fiber for High Power Fiber Laser Applications
We explore the properties of a novel stimulated Raman scattering (SRS) filtering fiber for high average or high peak optical power delivery applications. The fiber geometry is based on a series of circularly arranged high index rods embedded in a leaky silica cladding. The operation principle relies on the resonant coupling of the core and rod modes and the wavelength-dependent leaking of the structure. The fabricated fiber demonstrated wide transmission window and filtering of SRS with extinction in excess of 20 dB at the Raman Stokes wavelength, excellent robustness with bending, and high output beam quality. The fiber has been tested as a beam delivery fiber of a commercial pulsed fiber laser system in order to explore the filtering performance and its limitations.
- 15 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 24 (3) , 1-9
Resonant SRS Filtering Fiber for High Power Fiber Laser Applications
We explore the properties of a novel stimulated Raman scattering (SRS) filtering fiber for high average or high peak optical power delivery applications. The fiber geometry is based on a series of circularly arranged high index rods embedded in a leaky silica cladding. The operation principle relies on the resonant coupling of the core and rod modes and the wavelength-dependent leaking of the structure. The fabricated fiber demonstrated wide transmission window and filtering of SRS with extinction in excess of 20 dB at the Raman Stokes wavelength, excellent robustness with bending, and high output beam quality. The fiber has been tested as a beam delivery fiber of a commercial pulsed fiber laser system in order to explore the filtering performance and its limitations.