Jae-Woo Choi
Jae-Woo Choi has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Demetri Psaltis
School of Engineering, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland
6 shared publications- Demetri Psaltis
Optics Laboratory (LO), École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland
5 shared publications - Andreas. E. Vasdekis
Department of Physics, University of Idaho
3 shared publications Ye Pu
Laboratory of Optics, School of Engineering, EPFL, CH-1015 Lausanne, Switzerland
3 shared publicationsAllen Pu
2 shared publicationsArnaud Magrez
2 shared publications
Latest Publications
- Open Access
Image-Driven Furniture Style for Interactive 3D Scene Modeling
Creating realistic styled spaces is a complex task, which involves design know-how for what furniture pieces go well together. Interior style follows abstract rules involving color, geometry and other visual elements. Following such rules, users manually select similar-style items from large repositories of 3D furniture models, a process which is both laborious and time-consuming. We propose a method for fast-tracking style-similarity tasks, by learning a furniture's style-compatibility from interior scene images. Such images contain more style information than images depicting single furniture. To understand style, we train a deep learning network on a classification task. Based on image embeddings extracted from our network, we measure stylistic compatibility of furniture. We demonstrate our method with several 3D model style-compatibility results, and with an interactive system for modeling style-consistent scenes.
Open AccessImage-Driven Furniture Style for Interactive 3D Scene Modeling
Creating realistic styled spaces is a complex task, which involves design know-how for what furniture pieces go well together. Interior style follows abstract rules involving color, geometry and other visual elements. Following such rules, users manually select similar-style items from large repositories of 3D furniture models, a process which is both laborious and time-consuming. We propose a method for fast-tracking style-similarity tasks, by learning a furniture's style-compatibility from interior scene images. Such images contain more style information than images depicting single furniture. To understand style, we train a deep learning network on a classification task. Based on image embeddings extracted from our network, we measure stylistic compatibility of furniture. We demonstrate our method with several 3D model style-compatibility results, and with an interactive system for modeling style-consistent scenes.
- 1 October 2020
- Published by Wiley in Computer Graphics Forum
- Vol. 39 (7) , 57-68
Image‐Driven Furniture Style for Interactive 3D Scene Modeling
Creating realistic styled spaces is a complex task, which involves design know‐how for what furniture pieces go well together. Interior style follows abstract rules involving color, geometry and other visual elements. Following such rules, users manually select similar‐style items from large repositories of 3D furniture models, a process which is both laborious and time‐consuming. We propose a method for fast‐tracking style‐similarity tasks, by learning a furniture's style‐compatibility from interior scene images. Such images contain more style information than images depicting single furniture. To understand style, we train a deep learning network on a classification task. Based on image embeddings extracted from our network, we measure stylistic compatibility of furniture. We demonstrate our method with several 3D model style‐compatibility results, and with an interactive system for modeling style‐consistent scenes.
- 1 October 2020
- Published by Wiley in Computer Graphics Forum
- Vol. 39 (7) , 57-68
Image‐Driven Furniture Style for Interactive 3D Scene Modeling
Creating realistic styled spaces is a complex task, which involves design know‐how for what furniture pieces go well together. Interior style follows abstract rules involving color, geometry and other visual elements. Following such rules, users manually select similar‐style items from large repositories of 3D furniture models, a process which is both laborious and time‐consuming. We propose a method for fast‐tracking style‐similarity tasks, by learning a furniture's style‐compatibility from interior scene images. Such images contain more style information than images depicting single furniture. To understand style, we train a deep learning network on a classification task. Based on image embeddings extracted from our network, we measure stylistic compatibility of furniture. We demonstrate our method with several 3D model style‐compatibility results, and with an interactive system for modeling style‐consistent scenes.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Solar-vapor generation with 69% energy conversion efficiency in hollow-mesoporous plasmonic nanoshells
Harnessing solar energy at a high efficiency and a low cost remains challenging. The advent of nanotechnology enabled new solar-thermal techniques where plasmonic nanoparticles (NPs) in a volumetric dispersion are used to generate steam locally without a significant heat loss into the entire bulk, thereby alleviating the need for an extensive thermal insulation. Nanoparticle-assisted solar-vapor generation was recently demonstrated using SiO 2 /Au core/shell NPs at 1000× solar irradiance at air mass (AM) 1.5, showing an energy conversion efficiency of 24% [1]. Here, we achieve solar-vapor generation at 69% efficiency at 10× AM 1.5 by combining plasmonics with mesoporous thermal cavities, exploiting the extended active surface and nearly neutral buoyancy [Fig. 1(a)].
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Solar-vapor generation with 69% energy conversion efficiency in hollow-mesoporous plasmonic nanoshells
Harnessing solar energy at a high efficiency and a low cost remains challenging. The advent of nanotechnology enabled new solar-thermal techniques where plasmonic nanoparticles (NPs) in a volumetric dispersion are used to generate steam locally without a significant heat loss into the entire bulk, thereby alleviating the need for an extensive thermal insulation. Nanoparticle-assisted solar-vapor generation was recently demonstrated using SiO 2 /Au core/shell NPs at 1000× solar irradiance at air mass (AM) 1.5, showing an energy conversion efficiency of 24% [1]. Here, we achieve solar-vapor generation at 69% efficiency at 10× AM 1.5 by combining plasmonics with mesoporous thermal cavities, exploiting the extended active surface and nearly neutral buoyancy [Fig. 1(a)].
- 1 October 2015
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 15 (10) , 7699-7705
Advanced Passivation Technology and Loss Factor Minimization for High Efficiency Solar Cells
High-efficiency Si solar cells have attracted great attention from researchers, scientists, photovoltaic (PV) industry engineers for the past few decades. With thin wafers, surface passivation becomes necessary to increase the solar cells efficiency by overcoming several induced effects due to associated crystal defects and impurities of c-Si. This paper discusses suitable passivation schemes and optimization techniques to achieve high efficiency at low cost. SiN x film was optimized with higher transmittance and reduced recombination for using as an effective antireflection and passivation layer to attain higher solar cell efficiencies. The higher band gap increased the transmittance with reduced defect states that persisted at 1.68 and 1.80 eV in SiN x films. The thermal stability of SiN (Si-rich)/SiN (N-rich) stacks was also studied. Si-rich SiN with a refractive index of 2.7 was used as a passivation layer and N-rich SiN with a refractive index of 2.1 was used for thermal stability. An implied V OC of 720 mV with a stable lifetime of 1.5 ms was obtained for the stack layer after firing. Si–N and Si–H bonding concentration was analyzed by FTIR for the correlation of thermally stable passivation mechanism. The passivation property of spin coated Al2O3 films was also investigated. An effective surface recombination velocity of 55 cm/s with a high density of negative fixed charges (Q f) on the order of 9×1011 cm−2 was detected in Al2O3 films.
- 1 October 2015
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 15 (10) , 7699-7705
Advanced Passivation Technology and Loss Factor Minimization for High Efficiency Solar Cells
High-efficiency Si solar cells have attracted great attention from researchers, scientists, photovoltaic (PV) industry engineers for the past few decades. With thin wafers, surface passivation becomes necessary to increase the solar cells efficiency by overcoming several induced effects due to associated crystal defects and impurities of c-Si. This paper discusses suitable passivation schemes and optimization techniques to achieve high efficiency at low cost. SiN x film was optimized with higher transmittance and reduced recombination for using as an effective antireflection and passivation layer to attain higher solar cell efficiencies. The higher band gap increased the transmittance with reduced defect states that persisted at 1.68 and 1.80 eV in SiN x films. The thermal stability of SiN (Si-rich)/SiN (N-rich) stacks was also studied. Si-rich SiN with a refractive index of 2.7 was used as a passivation layer and N-rich SiN with a refractive index of 2.1 was used for thermal stability. An implied V OC of 720 mV with a stable lifetime of 1.5 ms was obtained for the stack layer after firing. Si–N and Si–H bonding concentration was analyzed by FTIR for the correlation of thermally stable passivation mechanism. The passivation property of spin coated Al2O3 films was also investigated. An effective surface recombination velocity of 55 cm/s with a high density of negative fixed charges (Q f) on the order of 9×1011 cm−2 was detected in Al2O3 films.
- 1 July 2014
- Published by AIP Publishing in Biomicrofluidics
- Vol. 8 (4) , 044108
A micropillar array for sample concentration via in-plane evaporation
We present a method to perform sample concentration within a lab-on-a-chip using a microfluidic structure which controls the liquid-gas interface through a micropillar array fabricated in polydimethylsiloxane between microfluidic channels. The microstructure confines the liquid flow and a thermal gradient is used to drive evaporation at the liquid-gas-interface. The evaporation occurs in-plane to the microfluidic device, allowing for precise control of the ambient environment. This method is demonstrated with a sample containing 1 μm, 100 nm fluorescent beads and SYTO-9 labelled Escherichia coli bacteria. Over 100 s, the fluorescent beads and bacteria are concentrated by a factor of 10.
- 1 July 2014
- Published by AIP Publishing in Biomicrofluidics
- Vol. 8 (4) , 044108
A micropillar array for sample concentration via in-plane evaporation
We present a method to perform sample concentration within a lab-on-a-chip using a microfluidic structure which controls the liquid-gas interface through a micropillar array fabricated in polydimethylsiloxane between microfluidic channels. The microstructure confines the liquid flow and a thermal gradient is used to drive evaporation at the liquid-gas-interface. The evaporation occurs in-plane to the microfluidic device, allowing for precise control of the ambient environment. This method is demonstrated with a sample containing 1 μm, 100 nm fluorescent beads and SYTO-9 labelled Escherichia coli bacteria. Over 100 s, the fluorescent beads and bacteria are concentrated by a factor of 10.
- 1 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 1 (47) , 7798-7802
Electro and pressure tunable cholesteric liquid crystal devices based on ion-implanted flexible substrates
We report an electro-responsive and pressure sensitive device based on conductive polydimethylsiloxane (PDMS) combined with a short pitch Cholesteric Liquid Crystal (CLC). Ion-implantation and surface chemistry in PDMS enable both the induction of conducting properties in this elastomer as well as long range organization of the CLC. Sample electro-optical and pressure dependent optical properties are explored by applying a modulated electric field through the conducting PDMS and a uniform pressure on the top cover substrate. We show that both an electric field of a few V μm−1 and an external pressure of up to 128 kPa can tune the reflection band by about 100 nm.
- 1 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 1 (47) , 7798-7802
Electro and pressure tunable cholesteric liquid crystal devices based on ion-implanted flexible substrates
We report an electro-responsive and pressure sensitive device based on conductive polydimethylsiloxane (PDMS) combined with a short pitch Cholesteric Liquid Crystal (CLC). Ion-implantation and surface chemistry in PDMS enable both the induction of conducting properties in this elastomer as well as long range organization of the CLC. Sample electro-optical and pressure dependent optical properties are explored by applying a modulated electric field through the conducting PDMS and a uniform pressure on the top cover substrate. We show that both an electric field of a few V μm−1 and an external pressure of up to 128 kPa can tune the reflection band by about 100 nm.
- 1 July 2013
- Published by Elsevier in Current Applied Physics
- Vol. 13 (5) , 808-813
Optimization of transparent conductor-embedding front electrodes for efficient light management
- 1 July 2013
- Published by Elsevier in Current Applied Physics
- Vol. 13 (5) , 808-813
Optimization of transparent conductor-embedding front electrodes for efficient light management
- 19 August 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7762, 776224-776224-8
Surface optofluidics
Surfaces -defined as the interfaces between solids and liquids- have attracted much attention in optics and biology, such as total internal reflection imaging (TIRF) and DNA microarrays. Within the context of optofluidics however, surfaces have received little attention. In this paper, we describe how surfaces can define or enhance optofluidic function. More specifically we discuss chemical interfaces that control the orientation of liquid crystals and the stretching of individual nucleic acids, diffractive and plasmonic nanostructures for lasing and opto-thermal control, as well as microstructures that read pressure and form chemical patterns.
- 19 August 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7762, 776224-776224-8
Surface optofluidics
Surfaces -defined as the interfaces between solids and liquids- have attracted much attention in optics and biology, such as total internal reflection imaging (TIRF) and DNA microarrays. Within the context of optofluidics however, surfaces have received little attention. In this paper, we describe how surfaces can define or enhance optofluidic function. More specifically we discuss chemical interfaces that control the orientation of liquid crystals and the stretching of individual nucleic acids, diffractive and plasmonic nanostructures for lasing and opto-thermal control, as well as microstructures that read pressure and form chemical patterns.
- 7 January 2010
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 10 (6) , 783-788
3-dimensional electrode patterning within a microfluidic channel using metal ion implantation
The application of electrical fields within a microfluidic channel enables many forms of manipulation necessary for lab-on-a-chip devices. Patterning electrodes inside the microfluidic channel generally requires multi-step optical lithography. Here, we utilize an ion-implantation process to pattern 3D electrodes within a fluidic channel made of polydimethylsiloxane (PDMS). Electrode structuring within the channel is achieved by ion implantation at a 40° angle with a metal shadow mask. The advantages of three-dimensional structuring of electrodes within a fluidic channel over traditional planar electrode designs are discussed. Two possible applications are presented: asymmetric particles can be aligned in any of the three axial dimensions with electro-orientation; colloidal focusing and concentration within a fluidic channel can be achieved through dielectrophoresis. Demonstrations are shown with E. coli, a rod shaped bacteria, and indicate the potential that ion-implanted microfluidic channels have for manipulations in the context of lab-on-a-chip devices.
- 7 January 2010
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 10 (6) , 783-788
3-dimensional electrode patterning within a microfluidic channel using metal ion implantation
The application of electrical fields within a microfluidic channel enables many forms of manipulation necessary for lab-on-a-chip devices. Patterning electrodes inside the microfluidic channel generally requires multi-step optical lithography. Here, we utilize an ion-implantation process to pattern 3D electrodes within a fluidic channel made of polydimethylsiloxane (PDMS). Electrode structuring within the channel is achieved by ion implantation at a 40° angle with a metal shadow mask. The advantages of three-dimensional structuring of electrodes within a fluidic channel over traditional planar electrode designs are discussed. Two possible applications are presented: asymmetric particles can be aligned in any of the three axial dimensions with electro-orientation; colloidal focusing and concentration within a fluidic channel can be achieved through dielectrophoresis. Demonstrations are shown with E. coli, a rod shaped bacteria, and indicate the potential that ion-implanted microfluidic channels have for manipulations in the context of lab-on-a-chip devices.
- 1 January 2010
- Published by Optica Publishing Group
- p. CWM7
Optically Generated Electric Fields by Lithium Niobate Nanowires
We demonstrate that lithium niobate nanowires generate electric fields under 514 nm continuous wave laser illumination. Birefringent media are used to visualize the generated fields in a microfluidic channel. Input laser polarization dependence is shown.
- 1 January 2010
- Published by Optica Publishing Group
- p. CWM7
Optically Generated Electric Fields by Lithium Niobate Nanowires
We demonstrate that lithium niobate nanowires generate electric fields under 514 nm continuous wave laser illumination. Birefringent media are used to visualize the generated fields in a microfluidic channel. Input laser polarization dependence is shown.