Angela Köckritz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Angela Köckritz has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Andreas Martin
6 shared publicationsJohannes Panten
Symrise AG, 37603 Holzminden, Germany
4 shared publicationsAnna Kulik
Leibniz Institute for Catalysis (LIKAT Rostock) Albert-Einstein-Str. 29a 18059 Rostock Germany
2 shared publicationsBenjamin Schäffner
CREAVIS-Science-to-Business; Evonik Industries AG; Paul-Baumann-Str. 1 Marl 45772 Germany
2 shared publicationsKatja Neubauer
Leibniz Institute for Catalysis (LIKAT Rostock) Albert-Einstein-Str. 29a 18059 Rostock Germany
2 shared publications- Katja Neubauer
Leibniz Institute for Catalysis (LIKAT Rostock), Albert-Einstein-Str. 29a, 18059 Rostock, Germany
2 shared publications
Latest Publications
- Open Access
Oxidative Cleavage of 9,10-Dihydroxystearic Acid on Supported Au, Pd and PdAu Nanoparticle-Based Catalysts
The oxidative C-C cleavage of a C18 substrate is an important transformation in synthetic organic chemistry, facilitating the synthesis of valuable C8-C9 acids widely used in many industries. Through a comparative analysis of the catalytic and physicochemical properties of catalysts, comprising mono- (Pd or Au) and bimetallic (PdAu) nanoparticles deposited on oxides, oxyhydroxides and graphite-like carbon material Sibunit (Cp), it was shown that the efficiency of the catalyst in the oxidative cleavage of 9,10-dihydroxystearic acid relies on the nature of the active component, the support and the average size of metal nanoparticles (NPs). The dependency of 9,10-DSA conversion on the average size of metal NPs shows the structural sensitivity of the oxidative cleavage reaction. Notably, catalysts with an average size of gold particles less than 3 nm exhibit the highest activity. The nature of the active component and the support material are crucial factors determining the process selectivity. Among the catalysts studied, the most effective for the oxidative cleavage of 9,10-DSA is a material based on Au NPs deposited on Cp.
Open AccessOxidative Cleavage of 9,10-Dihydroxystearic Acid on Supported Au, Pd and PdAu Nanoparticle-Based Catalysts
The oxidative C-C cleavage of a C18 substrate is an important transformation in synthetic organic chemistry, facilitating the synthesis of valuable C8-C9 acids widely used in many industries. Through a comparative analysis of the catalytic and physicochemical properties of catalysts, comprising mono- (Pd or Au) and bimetallic (PdAu) nanoparticles deposited on oxides, oxyhydroxides and graphite-like carbon material Sibunit (Cp), it was shown that the efficiency of the catalyst in the oxidative cleavage of 9,10-dihydroxystearic acid relies on the nature of the active component, the support and the average size of metal nanoparticles (NPs). The dependency of 9,10-DSA conversion on the average size of metal NPs shows the structural sensitivity of the oxidative cleavage reaction. Notably, catalysts with an average size of gold particles less than 3 nm exhibit the highest activity. The nature of the active component and the support material are crucial factors determining the process selectivity. Among the catalysts studied, the most effective for the oxidative cleavage of 9,10-DSA is a material based on Au NPs deposited on Cp.
- Open Access
Ce-Containing MgAl-Layered Double Hydroxide-Graphene Oxide Hybrid Materials as Multifunctional Catalysts for Organic Transformations
The combination of layered double hydroxides (LDH) with graphene oxide (GO) enables the formation of nanohybrids with improved properties. This work focuses on the structural and catalytic properties of Ce-containing MgAl LDH-GO composites bearing different concentrations of GO in the range of 5–25 wt.%. The synthesis of the composites was performed by co-precipitating the LDH phase in the presence of GO, while their characterization was performed using XRF, XRD, DRIFT, Raman, SEM, nitrogen adsorption-desorption, and acidity-basicity measurements. The LDH-GO composites, showing redox, basic, and acid catalytic functions, were tested in two different types of organic transformations: (i) Knoevenagel condensation and (ii) one-pot cascade oxidation-Knoevenagel condensation. (i) The cinnamic acid was synthesized by the Knoevenagel condensation of benzaldehyde with diethylmalonate. The composites showed catalytic performances in strong contrast to neat LDH or GO, suggesting a synergistic interaction between the two components. During Knoevenagel condensation, the catalytic activity increased with the GO content in the hybrids up to 15 wt.% and decreased afterwards. (ii) 2-Benzoyl-3-phenylacrylonitrile was synthesized by the aerobic oxidation of benzyl alcohol followed by the Knoevenagel condensation with benzoyl acetonitrile using three different non-polar solvents, i.e., toluene, benzene, and mesitylene. The conversion of benzyl alcohol was higher for the hybrid materials compared to the individual components but decreased with the increase of the graphene oxide concentration.
Open AccessCe-Containing MgAl-Layered Double Hydroxide-Graphene Oxide Hybrid Materials as Multifunctional Catalysts for Organic Transformations
The combination of layered double hydroxides (LDH) with graphene oxide (GO) enables the formation of nanohybrids with improved properties. This work focuses on the structural and catalytic properties of Ce-containing MgAl LDH-GO composites bearing different concentrations of GO in the range of 5–25 wt.%. The synthesis of the composites was performed by co-precipitating the LDH phase in the presence of GO, while their characterization was performed using XRF, XRD, DRIFT, Raman, SEM, nitrogen adsorption-desorption, and acidity-basicity measurements. The LDH-GO composites, showing redox, basic, and acid catalytic functions, were tested in two different types of organic transformations: (i) Knoevenagel condensation and (ii) one-pot cascade oxidation-Knoevenagel condensation. (i) The cinnamic acid was synthesized by the Knoevenagel condensation of benzaldehyde with diethylmalonate. The composites showed catalytic performances in strong contrast to neat LDH or GO, suggesting a synergistic interaction between the two components. During Knoevenagel condensation, the catalytic activity increased with the GO content in the hybrids up to 15 wt.% and decreased afterwards. (ii) 2-Benzoyl-3-phenylacrylonitrile was synthesized by the aerobic oxidation of benzyl alcohol followed by the Knoevenagel condensation with benzoyl acetonitrile using three different non-polar solvents, i.e., toluene, benzene, and mesitylene. The conversion of benzyl alcohol was higher for the hybrid materials compared to the individual components but decreased with the increase of the graphene oxide concentration.
- Open Access
- 4 September 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (48) , 27865-27873
Selective Wacker type oxidation of a macrocyclic diene to the corresponding monounsaturated ketone used as fragrance
A selective reaction method for the efficient conversion of an isomeric mixture of 1,9-cyclohexadecadiene (1,9-CHDD) to the corresponding monounsaturated cyclohexadec-8-en-1-one (8-CHD) is described. 8-CHD was synthesized via Wacker type oxidation at room temperature using a highly electrophilic in situ formed dicationic palladium species. Isomerisation of the diene and over-oxidation of the substrate could be nearly suppressed by suitable reaction control, which has a positive effect on selectivity. The utilization of molecular oxygen as a green oxidant and environmentally benign iron(III) salts as co-catalysts was successfully applied. This reaction strategy is promising to overcome the low overall reactivity of internal olefins in Wacker type oxidations. In addition, larger scale experiments showed further potential for industrial application.
- 4 September 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (48) , 27865-27873
Open AccessSelective Wacker type oxidation of a macrocyclic diene to the corresponding monounsaturated ketone used as fragrance
A selective reaction method for the efficient conversion of an isomeric mixture of 1,9-cyclohexadecadiene (1,9-CHDD) to the corresponding monounsaturated cyclohexadec-8-en-1-one (8-CHD) is described. 8-CHD was synthesized via Wacker type oxidation at room temperature using a highly electrophilic in situ formed dicationic palladium species. Isomerisation of the diene and over-oxidation of the substrate could be nearly suppressed by suitable reaction control, which has a positive effect on selectivity. The utilization of molecular oxygen as a green oxidant and environmentally benign iron(III) salts as co-catalysts was successfully applied. This reaction strategy is promising to overcome the low overall reactivity of internal olefins in Wacker type oxidations. In addition, larger scale experiments showed further potential for industrial application.
- Open Access
- 25 July 2019
- Published by Wiley in ChemistryOpen
- Vol. 8 (8) , 1034
Cover Feature: Heterogeneously Catalysed Oxidative Dehydrogenation of Menthol in a Fixed‐Bed Reactor in the Gas Phase (ChemistryOpen 8/2019)
The Cover Feature demonstrates the first continuous oxidative dehydrogenation of menthol, a terpenic ingredient of Mentha species, to isomenthone and menthone in the gas‐phase. The products are used in the flavor and fragrance industry. More information can be found in the Full Paper by A. Kulik et al.
- 25 July 2019
- Published by Wiley in ChemistryOpen
- Vol. 8 (8) , 1034
Open AccessCover Feature: Heterogeneously Catalysed Oxidative Dehydrogenation of Menthol in a Fixed‐Bed Reactor in the Gas Phase (ChemistryOpen 8/2019)
The Cover Feature demonstrates the first continuous oxidative dehydrogenation of menthol, a terpenic ingredient of Mentha species, to isomenthone and menthone in the gas‐phase. The products are used in the flavor and fragrance industry. More information can be found in the Full Paper by A. Kulik et al.
- Open Access
- 11 June 2019
- Published by Wiley in ChemistryOpen
- Vol. 8 (8) , 1066-1075
Heterogeneously Catalysed Oxidative Dehydrogenation of Menthol in a Fixed‐Bed Reactor in the Gas Phase
For the first time, the oxidative dehydrogenation of (−)‐menthol to (−)‐menthone and (+)‐isomenthone in a marketable quality was carried out in a continuous gas phase reactor as a sustainable process using molecular oxygen as green oxidant and solid catalysts which do not contaminate the product mixture and which are easily to remove. The diastereomeric purity remained largely unchanged. Three types of catalysts were found to be very active and selective in the formation of menthone and isomenthone: AgSr/SiO2, CuO distributed on a basic support and RuMnCe/CeO2, where Ru, Mn and Ce exist in an oxidized state. The best overall yield of menthon/isomenthone obtained with an Ag‐based catalyst was 58 % at 64 % selectivity, with a Cu‐based catalyst 41 % at 51 % selectivity and with a Ru‐based catalyst 68 % at 73 % selectivity. Reaction conditions were widely optimized.
- 11 June 2019
- Published by Wiley in ChemistryOpen
- Vol. 8 (8) , 1066-1075
Open AccessHeterogeneously Catalysed Oxidative Dehydrogenation of Menthol in a Fixed‐Bed Reactor in the Gas Phase
For the first time, the oxidative dehydrogenation of (−)‐menthol to (−)‐menthone and (+)‐isomenthone in a marketable quality was carried out in a continuous gas phase reactor as a sustainable process using molecular oxygen as green oxidant and solid catalysts which do not contaminate the product mixture and which are easily to remove. The diastereomeric purity remained largely unchanged. Three types of catalysts were found to be very active and selective in the formation of menthone and isomenthone: AgSr/SiO2, CuO distributed on a basic support and RuMnCe/CeO2, where Ru, Mn and Ce exist in an oxidized state. The best overall yield of menthon/isomenthone obtained with an Ag‐based catalyst was 58 % at 64 % selectivity, with a Cu‐based catalyst 41 % at 51 % selectivity and with a Ru‐based catalyst 68 % at 73 % selectivity. Reaction conditions were widely optimized.
- 8 October 2018
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 120 (11)
Fatty Ester-Based Hydroxy Carbamates - Synthesis and Investigation as Lubricant Additives
- 8 October 2018
- Published by Wiley in European Journal of Lipid Science and Technology
- Vol. 120 (11)
Fatty Ester-Based Hydroxy Carbamates - Synthesis and Investigation as Lubricant Additives
- 27 April 2018
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2018 (24) , 2776-2784
Alkylation of Cyclododecanone with Allyl Acetate in the Presence of Solid Radical Initiators
The radical alkylation of cyclododecanone (CDD) with allyl acetate (AlAc) yielding 2‐[3‐(acetyloxy)propyl] cyclododecanone (CDDPA) in the presence of different inorganic radical initiators was investigated. The most useful initiator among other inorganic metal oxides was found to be CuO. The molar ratio of CDD and AlAc was varied between 10:1 and 3:1. CuO was characterized by using different analytical methods, such as N2 adsorption, powder X‐ray diffraction, temperature‐programmed reduction, scanning electron microscopy, and X‐ray photoelectron spectroscopy. The reaction was performed in a batch system, by adding all the reactants at once, and in a semibatch procedure by dosing AlAc over the whole time of the experiment. Different parameters that affected the selectivity of CDDPA were studied, such as the ratio of CDD/AlAc, reaction time, surface of CuO initiator, and reaction temperature. The best result was obtained with 21 % conversion of CDD and 77 % selectivity to CDDPA at a final molar ratio of CDD/AlAc = 4:1 in the semibatch procedure.
- 27 April 2018
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2018 (24) , 2776-2784
Alkylation of Cyclododecanone with Allyl Acetate in the Presence of Solid Radical Initiators
The radical alkylation of cyclododecanone (CDD) with allyl acetate (AlAc) yielding 2‐[3‐(acetyloxy)propyl] cyclododecanone (CDDPA) in the presence of different inorganic radical initiators was investigated. The most useful initiator among other inorganic metal oxides was found to be CuO. The molar ratio of CDD and AlAc was varied between 10:1 and 3:1. CuO was characterized by using different analytical methods, such as N2 adsorption, powder X‐ray diffraction, temperature‐programmed reduction, scanning electron microscopy, and X‐ray photoelectron spectroscopy. The reaction was performed in a batch system, by adding all the reactants at once, and in a semibatch procedure by dosing AlAc over the whole time of the experiment. Different parameters that affected the selectivity of CDDPA were studied, such as the ratio of CDD/AlAc, reaction time, surface of CuO initiator, and reaction temperature. The best result was obtained with 21 % conversion of CDD and 77 % selectivity to CDDPA at a final molar ratio of CDD/AlAc = 4:1 in the semibatch procedure.
- 1 February 2016
- Published by Elsevier in Tetrahedron Letters
- Vol. 57 (8) , 964-968
Epoxide and cyclic carbonate with diisononyl succinate backbone as phthalate-free plasticizers
- 1 February 2016
- Published by Elsevier in Tetrahedron Letters
- Vol. 57 (8) , 964-968
Epoxide and cyclic carbonate with diisononyl succinate backbone as phthalate-free plasticizers
- 21 October 2013
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 16 (4) , 1799-1806
Insights into gold-catalyzed synthesis of azelaic acid
A novel green route for the synthesis of azelaic and pelargonic acid via aerobic gold-catalyzed cleavage of 9,10-dihydroxystearic acid (DSA) was investigated recently. In this study, the examination of the reaction mechanism is described. The results of the application of 18O-labeled molecular oxygen and sodium hydroxide as well as of diastereomeric pure erythro- and threo-DSA were discussed. Assumed reaction intermediates were synthesized and subjected to the same reaction conditions as with DSA. As a conclusion from the obtained data, an oxidative dehydrogenation mechanism was postulated. Additionally, the aging of the gold catalyst used under different storage conditions was explored.
- 21 October 2013
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 16 (4) , 1799-1806
Insights into gold-catalyzed synthesis of azelaic acid
A novel green route for the synthesis of azelaic and pelargonic acid via aerobic gold-catalyzed cleavage of 9,10-dihydroxystearic acid (DSA) was investigated recently. In this study, the examination of the reaction mechanism is described. The results of the application of 18O-labeled molecular oxygen and sodium hydroxide as well as of diastereomeric pure erythro- and threo-DSA were discussed. Assumed reaction intermediates were synthesized and subjected to the same reaction conditions as with DSA. As a conclusion from the obtained data, an oxidative dehydrogenation mechanism was postulated. Additionally, the aging of the gold catalyst used under different storage conditions was explored.