Ding Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ding Chen has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Dachuan Chen
School of Aviation Basic, Aviation University Air Force , Changchun 130000 , China
7 shared publicationsJinping Ni
Xi’an Technological University, University Middle Road No. 2, Weiyang District, Xi’an, Shaanxi Province, 710021, China
7 shared publicationsLang Bai
5 shared publicationsTao Dong
School of Opto-electronical Engineering, Xi’an Technological University, Xi’an, China
4 shared publicationsZiyu Yang
School of Defence Science and Technology, Xi’an Technological University
4 shared publicationsJingping Ni
3 shared publications
Latest Publications
- Open Access
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Numerical investigation of the multi-physics coupling effect of supersonic projectile on the cross section of terminal ballistics
This study numerically investigates the multi-physics coupling effects of supersonic projectiles on terminal ballistics, focusing on shock wave interactions and their impact on measurement accuracy. A novel acoustic-optic coupling detection method is introduced, capable of capturing refractive index changes induced by shock waves. Using COMSOL simulations, the research demonstrates that this method offers superior sensitivity compared to traditional approaches, providing a precise way to determine projectile incidence angles. The findings have significant implications for improving measurement accuracy in hypersonic weapon systems.
- 1 March 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (3)
Open AccessNumerical investigation of the multi-physics coupling effect of supersonic projectile on the cross section of terminal ballistics
This study numerically investigates the multi-physics coupling effects of supersonic projectiles on terminal ballistics, focusing on shock wave interactions and their impact on measurement accuracy. A novel acoustic-optic coupling detection method is introduced, capable of capturing refractive index changes induced by shock waves. Using COMSOL simulations, the research demonstrates that this method offers superior sensitivity compared to traditional approaches, providing a precise way to determine projectile incidence angles. The findings have significant implications for improving measurement accuracy in hypersonic weapon systems.
- Open Access
- 1 December 2024
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2891 (11)
Numerical investigation of the multi-physics coupling effect of supersonic projectile on the cross section of terminal ballistics
This study investigates the multiphysics effects the shock waves from the supersonic projectile on the cross section of its terminal ballistics, and this purpose is to effectively extract attitude information of projectiles in terminal ballistics。Firstly, the acoustic effects are used to study the propagation and attenuation laws of shock waves on the terminal ballistic plane, comparing the spectral characteristics of acoustic pressure signals and photoelectric signals; Secondly, through numerical simulations using COMSOL, the study analyses shock wave attenuation, refractive index changes, and pressure distribution at different Mach numbers. Results show that shock waves significantly affect the refractive index, which can be effectively detected using optical methods. The proposed method demonstrates improved accuracy over conventional techniques, particularly in capturing critical flight parameters of supersonic projectiles. This research lays the groundwork for developing advanced measurement techniques for hypersonic weapon systems, addressing current limitations in projectile detection and measurement accuracy.
- 1 December 2024
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2891 (11)
Open AccessNumerical investigation of the multi-physics coupling effect of supersonic projectile on the cross section of terminal ballistics
This study investigates the multiphysics effects the shock waves from the supersonic projectile on the cross section of its terminal ballistics, and this purpose is to effectively extract attitude information of projectiles in terminal ballistics。Firstly, the acoustic effects are used to study the propagation and attenuation laws of shock waves on the terminal ballistic plane, comparing the spectral characteristics of acoustic pressure signals and photoelectric signals; Secondly, through numerical simulations using COMSOL, the study analyses shock wave attenuation, refractive index changes, and pressure distribution at different Mach numbers. Results show that shock waves significantly affect the refractive index, which can be effectively detected using optical methods. The proposed method demonstrates improved accuracy over conventional techniques, particularly in capturing critical flight parameters of supersonic projectiles. This research lays the groundwork for developing advanced measurement techniques for hypersonic weapon systems, addressing current limitations in projectile detection and measurement accuracy.
- 12 November 2024
- Published by Emerald Publishing in Sensor Review
- Vol. 45 (1) , 65-73
Photoelectric sensor array-based measurement method for the key motion parameters of the small flying object considering non-uniform curve trajectory
Purpose: The paper aims to accurately measure the key motion parameters, such as velocity, azimuth and pitch angle, of the small flying object with a non-uniform curve trajectory. It proposes a measurement method and its calculation model of non-uniform curve trajectory using a photoelectric sensor array. Design/methodology/approach: First, the basic composition of the measurement system and mechanism of photoelectric sensor array are described, respectively. Second, a non-uniform curve mathematical measurement model is constructed differently from the traditional linear trajectory, taking into account the influence of gravity and air resistance. Third, the measurement error of the system is analyzed through numerical simulation. Finally, the accuracy and feasibility of the approach are verified by live-ammunition experiments. Findings: The results show that the systematic error of the hitting point coordinates can be reduced by 9% compared to the traditional linear measurement model. Consequently, this method can meet the higher measurement requirement for the key motion parameters of the small flying object under the non-uniform curve trajectory. Research limitations/implications (if applicable)- although the approach itself is generalizable, the method is unable to detect the motion parameters of multiple small flying objects. Research limitations/implications: Although the approach itself is generalizable, the method is unable to detect the motion parameters of the multiple small flying objects. Practical implications: It is evident that the proposed non-uniform curve measurement model is more precise in quantifying the essential characteristics of the small flying object, particularly in consideration of the environmental conditions. Social implications: The precise measurement of the key motion parameters of the small flying object can facilitate the enhancement of the protective performance of protective materials. Originality/value: A novel approach to measurement is proposed, which differs from the conventional uniform trajectory model. To this end, the space construction of the photoelectric sensor array is optimized. The number of the sensors is revised.
- 12 November 2024
- Published by Emerald Publishing in Sensor Review
- Vol. 45 (1) , 65-73
Photoelectric sensor array-based measurement method for the key motion parameters of the small flying object considering non-uniform curve trajectory
Purpose: The paper aims to accurately measure the key motion parameters, such as velocity, azimuth and pitch angle, of the small flying object with a non-uniform curve trajectory. It proposes a measurement method and its calculation model of non-uniform curve trajectory using a photoelectric sensor array. Design/methodology/approach: First, the basic composition of the measurement system and mechanism of photoelectric sensor array are described, respectively. Second, a non-uniform curve mathematical measurement model is constructed differently from the traditional linear trajectory, taking into account the influence of gravity and air resistance. Third, the measurement error of the system is analyzed through numerical simulation. Finally, the accuracy and feasibility of the approach are verified by live-ammunition experiments. Findings: The results show that the systematic error of the hitting point coordinates can be reduced by 9% compared to the traditional linear measurement model. Consequently, this method can meet the higher measurement requirement for the key motion parameters of the small flying object under the non-uniform curve trajectory. Research limitations/implications (if applicable)- although the approach itself is generalizable, the method is unable to detect the motion parameters of multiple small flying objects. Research limitations/implications: Although the approach itself is generalizable, the method is unable to detect the motion parameters of the multiple small flying objects. Practical implications: It is evident that the proposed non-uniform curve measurement model is more precise in quantifying the essential characteristics of the small flying object, particularly in consideration of the environmental conditions. Social implications: The precise measurement of the key motion parameters of the small flying object can facilitate the enhancement of the protective performance of protective materials. Originality/value: A novel approach to measurement is proposed, which differs from the conventional uniform trajectory model. To this end, the space construction of the photoelectric sensor array is optimized. The number of the sensors is revised.
- 19 June 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (9) , 095008
Accuracy calibration of the multi-light screen measurement system using array optical signal
The multi-light screen measurement systems must be calibrated before being come into use, and a calibration method using live-fire practice is generally adopted. However, this method has many shortcomings, such as high cost, high risk and poor efficiency. To effectively improve the measurement accuracy of a multi-light screen measurement system, we propose a calibration method based on array optical signal in the paper. According to the measurement principle of the system, the proposed calibration theory is systematically described. The aim is to map the given measurement results in the form of vector into the specified time sequence. Furthermore, we develop a calibration platform whose core components are an arbitrary waveform generator and a tunable laser, and thus it can generate a set of six optical signals with an exact sequential relationship. After receiving the optical signals, some measurement results with errors are obtained by the system. Many calibration operations are performed to obtain the systematic errors, which are the statistical average of the deviation between the given measurement results and those with errors. Finally, we use the proposed calibration method combined with the error tensor and the traditional one to carry out comparison experiments. The results show that the proposed calibration method is superior to the traditional method in terms of comprehensive performance. In addition, the proposed calibration method relative to the traditional ones has some advantages, such as high efficiency, safety and low cost.
- 19 June 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (9) , 095008
Accuracy calibration of the multi-light screen measurement system using array optical signal
The multi-light screen measurement systems must be calibrated before being come into use, and a calibration method using live-fire practice is generally adopted. However, this method has many shortcomings, such as high cost, high risk and poor efficiency. To effectively improve the measurement accuracy of a multi-light screen measurement system, we propose a calibration method based on array optical signal in the paper. According to the measurement principle of the system, the proposed calibration theory is systematically described. The aim is to map the given measurement results in the form of vector into the specified time sequence. Furthermore, we develop a calibration platform whose core components are an arbitrary waveform generator and a tunable laser, and thus it can generate a set of six optical signals with an exact sequential relationship. After receiving the optical signals, some measurement results with errors are obtained by the system. Many calibration operations are performed to obtain the systematic errors, which are the statistical average of the deviation between the given measurement results and those with errors. Finally, we use the proposed calibration method combined with the error tensor and the traditional one to carry out comparison experiments. The results show that the proposed calibration method is superior to the traditional method in terms of comprehensive performance. In addition, the proposed calibration method relative to the traditional ones has some advantages, such as high efficiency, safety and low cost.
- 4 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13070, 287-302
Calibration method for the measurement accuracy of a photoelectric test system with intersecting detection areas using array optical signal
The article proposes a calibration method based on array optical signal to effectively improve the measurement accuracy of a photoelectric testing system with intersecting detection areas. According to the measurement principle of the system, the proposed calibration theory is systematically described. The aim is to map the given results in the form of vector into the time sequence. Subsequently, we develop a calibration platform whose core components are an arbitrary waveform generator and a tunable laser, and thus it can generate a set of six optical signals with an exact sequential relationship. After receiving the optical signals, some measurement results with errors are obtained by the system. Many calibration operations is performed to obtain the systematic errors, which are the statistical average of the deviation between the given results and those with errors. The results show that the comprehensive performance of the proposed calibration method is superior to that of the traditional method. In addition, the proposed calibration method relative to the traditional ones has some advantages, such as high efficiency, safety and low cost.
- 4 March 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13070, 287-302
Calibration method for the measurement accuracy of a photoelectric test system with intersecting detection areas using array optical signal
The article proposes a calibration method based on array optical signal to effectively improve the measurement accuracy of a photoelectric testing system with intersecting detection areas. According to the measurement principle of the system, the proposed calibration theory is systematically described. The aim is to map the given results in the form of vector into the time sequence. Subsequently, we develop a calibration platform whose core components are an arbitrary waveform generator and a tunable laser, and thus it can generate a set of six optical signals with an exact sequential relationship. After receiving the optical signals, some measurement results with errors are obtained by the system. Many calibration operations is performed to obtain the systematic errors, which are the statistical average of the deviation between the given results and those with errors. The results show that the comprehensive performance of the proposed calibration method is superior to that of the traditional method. In addition, the proposed calibration method relative to the traditional ones has some advantages, such as high efficiency, safety and low cost.
- 1 January 2024
- Published by Shanghai Institute of Optics and Fine Mechanics in ACTA PHOTONICA SINICA
- Vol. 53 (7) , 0753309-0753309-13
基于稀疏光电探测阵列的轻武器终点弹道关键参数测量
The article proposes a measurement method to efficiently and accurately obtain the key terminal ballistic parameters (i.e., the hitting coordinates, the flight velocity, the flight direction angle of the projectile and the weapon firing rate) of small arms using the sparse distribution detector array. Compared with the traditional methods of uniformly and densely arranged detectors, this method greatly reduces the number of lasers and detectors required, thus saving costs. In addition, because the detector distribution can be non-uniform, installation and commissioning are more flexible and convenient. First, the detection principle and the composition of the system based on the propagation characteristics of the shock wave are described. Then, the measurement model of the system is established, and the calculation equations are derived by combining the relevant structural parameters and the shock wave propagation velocity. In addition, the systematic errors of the parameters such as the impact coordinates and the flight velocity are analyzed, and the effectiveness and practicality of the measurement method are verified by simulation. The simulation results show that in the effective target area of 10 m×10 m, the measurement error distributions of x
- 1 January 2024
- Published by Shanghai Institute of Optics and Fine Mechanics in ACTA PHOTONICA SINICA
- Vol. 53 (7) , 0753309-0753309-13
基于稀疏光电探测阵列的轻武器终点弹道关键参数测量
The article proposes a measurement method to efficiently and accurately obtain the key terminal ballistic parameters (i.e., the hitting coordinates, the flight velocity, the flight direction angle of the projectile and the weapon firing rate) of small arms using the sparse distribution detector array. Compared with the traditional methods of uniformly and densely arranged detectors, this method greatly reduces the number of lasers and detectors required, thus saving costs. In addition, because the detector distribution can be non-uniform, installation and commissioning are more flexible and convenient. First, the detection principle and the composition of the system based on the propagation characteristics of the shock wave are described. Then, the measurement model of the system is established, and the calculation equations are derived by combining the relevant structural parameters and the shock wave propagation velocity. In addition, the systematic errors of the parameters such as the impact coordinates and the flight velocity are analyzed, and the effectiveness and practicality of the measurement method are verified by simulation. The simulation results show that in the effective target area of 10 m×10 m, the measurement error distributions of x
- Open Access
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Physics
- Vol. 22 (1)
Super-resolution reconstruction method of the optical synthetic aperture image using generative adversarial network
In order to solve the contradiction between large aperture elements and high-resolution images, in this study, we propose an improved image-resolution method based on generative adversarial network (GAN). First, we analyze the imaging principle of the optical synthetic aperture. Further, we improve a super-resolution GAN; especially, this network uses a multi-scale convolutional cascade to obtain global features of the image, and a multi-scale receptive field block and residual in residual dense block are built to obtain image details. In addition, this study uses the Mish function as the activation function of the discriminator to solve the problems of neuron extreme, gradient explosion, and poor generalization ability of the model. Through simulation, the results show that the proposed method can achieve a peak signal-to-noise ratio (PSNR) of 30 dB compared with traditional image super-resolution reconstruction methods for synthetic aperture image. The method proposed has an improvement of 2 dB in the PSNR and 0.016 in structure similarity index measure compared with the original super-resolution GAN. Therefore, this method can effectively reduce the image distortion and improve the quality of image reconstruction.
- 1 January 2024
- Published by Walter de Gruyter GmbH in Open Physics
- Vol. 22 (1)
Open AccessSuper-resolution reconstruction method of the optical synthetic aperture image using generative adversarial network
In order to solve the contradiction between large aperture elements and high-resolution images, in this study, we propose an improved image-resolution method based on generative adversarial network (GAN). First, we analyze the imaging principle of the optical synthetic aperture. Further, we improve a super-resolution GAN; especially, this network uses a multi-scale convolutional cascade to obtain global features of the image, and a multi-scale receptive field block and residual in residual dense block are built to obtain image details. In addition, this study uses the Mish function as the activation function of the discriminator to solve the problems of neuron extreme, gradient explosion, and poor generalization ability of the model. Through simulation, the results show that the proposed method can achieve a peak signal-to-noise ratio (PSNR) of 30 dB compared with traditional image super-resolution reconstruction methods for synthetic aperture image. The method proposed has an improvement of 2 dB in the PSNR and 0.016 in structure similarity index measure compared with the original super-resolution GAN. Therefore, this method can effectively reduce the image distortion and improve the quality of image reconstruction.
- 18 December 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12959, 27-193
Measurement method for the key terminal ballistic parameters of the supersonic projectile using the sparse distribution detector array
The article proposes a measurement method using the sparse distribution detector array, and it can accurately measure the key terminal ballistic parameters (including hitting coordinates, flight velocity, firing angle and firing rate, etc.) of the supersonic projectile. Firstly, we describe the shock wave of the supersonic projectile and its propagation characteristics. What is more, the detection principle of the system is presented. Secondly, its measurement model is established through combining with the relevant structural parameters and the shock wave propagation velocity in the detection area. Next, the system is developed, and it mainly consists of several pairs of laser emitters and their receivers, two support frames, and a signal conditioning circuit. Finally, the systematic errors of the above parameters are analyzed through numerical simulation, respectively. The results show that the measurement method can meet the requirements for testing the terminal ballistic parameters of the supersonic projectile. Compared with the previous methods, it has the advantages such as better uniformity detection sensitivity, high accuracy, lower cost, easy installation and adjustment.
- 18 December 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12959, 27-193
Measurement method for the key terminal ballistic parameters of the supersonic projectile using the sparse distribution detector array
The article proposes a measurement method using the sparse distribution detector array, and it can accurately measure the key terminal ballistic parameters (including hitting coordinates, flight velocity, firing angle and firing rate, etc.) of the supersonic projectile. Firstly, we describe the shock wave of the supersonic projectile and its propagation characteristics. What is more, the detection principle of the system is presented. Secondly, its measurement model is established through combining with the relevant structural parameters and the shock wave propagation velocity in the detection area. Next, the system is developed, and it mainly consists of several pairs of laser emitters and their receivers, two support frames, and a signal conditioning circuit. Finally, the systematic errors of the above parameters are analyzed through numerical simulation, respectively. The results show that the measurement method can meet the requirements for testing the terminal ballistic parameters of the supersonic projectile. Compared with the previous methods, it has the advantages such as better uniformity detection sensitivity, high accuracy, lower cost, easy installation and adjustment.
- Open Access
Measurement Method for the Flight Parameters of a Small Flying Object Using a Multi-Dimensional LED Detection Array
This article proposes a measurement method using a multi-dimensional LED detection array, which can be used to obtain the flight parameters (i.e., impact coordinates, flight velocity, and incident angle) of a small flying object. Firstly, the composition of the proposed system and its detection principle are described in detail. Then, a calculation model is derived according to the geometrical relationship between the different LED detection arrays, which can calculate the above flight parameters. Furthermore, numerical simulations are performed to analyze the change trend in the measurement error of the proposed system, and it can be verified that its measurement performance meets the related requirements in theory. Finally, we use the proposed system and a high-speed camera system to carry out comparison experiments with two different reference velocities of 900 m/s and 700 m/s, and the results show that the maximum deviation in the measured absolute velocity is always less than 1 m/s and that the maximum deviations of the measured coordinates of x and y are not more than 2 mm within the effective measurement range. Therefore, the proposed measurement method is feasible and effective, and it can also meet the requirements of the measurement system.
Open AccessMeasurement Method for the Flight Parameters of a Small Flying Object Using a Multi-Dimensional LED Detection Array
This article proposes a measurement method using a multi-dimensional LED detection array, which can be used to obtain the flight parameters (i.e., impact coordinates, flight velocity, and incident angle) of a small flying object. Firstly, the composition of the proposed system and its detection principle are described in detail. Then, a calculation model is derived according to the geometrical relationship between the different LED detection arrays, which can calculate the above flight parameters. Furthermore, numerical simulations are performed to analyze the change trend in the measurement error of the proposed system, and it can be verified that its measurement performance meets the related requirements in theory. Finally, we use the proposed system and a high-speed camera system to carry out comparison experiments with two different reference velocities of 900 m/s and 700 m/s, and the results show that the maximum deviation in the measured absolute velocity is always less than 1 m/s and that the maximum deviations of the measured coordinates of x and y are not more than 2 mm within the effective measurement range. Therefore, the proposed measurement method is feasible and effective, and it can also meet the requirements of the measurement system.
- Open Access
- 1 April 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2460 (1) , 012012
Research on Performance Improvement of Projectile Velocity Measurement Model
This paper studies the existing photoelectric velocimetry model, which assumes that the trajectory is straight and the projectile velocity is uniform and constant in the test area. In the test of muzzle velocity of projectile and the experiment of miss distance of proximity fuze, the influence of air resistance and other factors on the velocity during the flight of projectile is not considered, so there is a big test error in the velocity value. In this paper, an optimized test method of velocity parameters is put forward by deeply studying the aerodynamics of projectile in flight and combining with physical mechanics. Through experiments and simulation studies, it can be proved that the speed parameter value determined by this method is closer to the true value, and the relative error is much smaller than the existing measurement methods, which has certain practical value in practice.
- 1 April 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2460 (1) , 012012
Open AccessResearch on Performance Improvement of Projectile Velocity Measurement Model
This paper studies the existing photoelectric velocimetry model, which assumes that the trajectory is straight and the projectile velocity is uniform and constant in the test area. In the test of muzzle velocity of projectile and the experiment of miss distance of proximity fuze, the influence of air resistance and other factors on the velocity during the flight of projectile is not considered, so there is a big test error in the velocity value. In this paper, an optimized test method of velocity parameters is put forward by deeply studying the aerodynamics of projectile in flight and combining with physical mechanics. Through experiments and simulation studies, it can be proved that the speed parameter value determined by this method is closer to the true value, and the relative error is much smaller than the existing measurement methods, which has certain practical value in practice.