Sergio Oller
Sergio Oller has a total of 159 co-authors. Here are the top co-authors by number of shared publications:
- Alex H. Barbat
Centre Internacional de Metodes Numerics en Enginyeria (CIMNE), Universitat Politècnica de Catalunya, Barcelona, Spain
30 shared publications - Eugenio Oñate
Centre Internacional de Mètodes Numèrics a l’Enginyeria (CIMNE), Barcelona, Spain
25 shared publications - Xavier Martinez
International Center for Numerical Methods in Engineering, Composites and Advanced Materials for Multifunctional Structures
20 shared publications - Liz Graciela Nallim
Universidad Nacional de Salta
12 shared publications - Lucia Gratiela Barbu
Civil and Environmental Engineering Department (DECA), ETSECCPB, Universitat Politècnica de Catalunya (UPC), Campus Norte UPC, 08034 Barcelona, Spain
11 shared publications - Francisco López Almansa
Universitat Politècnica de Catalunya, Barcelona, Spain, Spain
7 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (19) , 3566
A Comparative Review of Fatigue Modeling Approaches in Metals: From Total-Life Methods to Fracture-Based Models
Fatigue is widely recognized as one of the primary failure mechanisms affecting metallic structures. Consequently, reliable prediction of fatigue-induced failure is essential for the safe design and lifetime prediction of engineering structures and components. In this context, the present work provides an overview of some of the main approaches employed for fatigue modeling in metals. First, the classical total-life methods, namely the stress–life and strain–life approaches, are reviewed. Subsequently, fracture-based approaches to fatigue are presented, including formulations grounded in fracture mechanics, continuum damage mechanics, and phase-field theory. The finite element method and the extended finite element method are also discussed as representative numerical frameworks for the implementation of these formulations. The reviewed approaches are then critically compared in terms of their applicability, capabilities, limitations and calibration requirements. Finally, relevant directions for future research are identified.
- 1 October 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (19) , 3566
Open AccessA Comparative Review of Fatigue Modeling Approaches in Metals: From Total-Life Methods to Fracture-Based Models
Fatigue is widely recognized as one of the primary failure mechanisms affecting metallic structures. Consequently, reliable prediction of fatigue-induced failure is essential for the safe design and lifetime prediction of engineering structures and components. In this context, the present work provides an overview of some of the main approaches employed for fatigue modeling in metals. First, the classical total-life methods, namely the stress–life and strain–life approaches, are reviewed. Subsequently, fracture-based approaches to fatigue are presented, including formulations grounded in fracture mechanics, continuum damage mechanics, and phase-field theory. The finite element method and the extended finite element method are also discussed as representative numerical frameworks for the implementation of these formulations. The reviewed approaches are then critically compared in terms of their applicability, capabilities, limitations and calibration requirements. Finally, relevant directions for future research are identified.
- Open Access
- 6 July 2026
- Published by MDPI AG in Preprints.org
A Comparative Review of Fatigue Modeling Approaches in Metals: From Total-Life Methods to Fracture-Based Models
Fatigue is widely recognized as one of the primary failure mechanisms affecting metallic structures. Consequently, reliable prediction of fatigue-induced failure is essential for the safe design and lifetime prediction of engineering structures and components. In this context, the present work provides an overview of some of the main approaches employed for fatigue modelling in metals. First, the classical total-life methods, namely the stress–life and strain–life approaches, are reviewed. Subsequently, fracture-based approaches to fatigue are presented, including formulations grounded in fracture mechanics, continuum damage mechanics, and phase-field theory. The finite element method and the extended finite element method are also discussed as representative numerical frameworks for the implementation of these formulations. The reviewed approaches are then critically compared, and their main characteristics are summarized in a comparative table. Finally, the principal features of the presented approaches are highlighted.
- 6 July 2026
- Published by MDPI AG in Preprints.org
Open AccessA Comparative Review of Fatigue Modeling Approaches in Metals: From Total-Life Methods to Fracture-Based Models
Fatigue is widely recognized as one of the primary failure mechanisms affecting metallic structures. Consequently, reliable prediction of fatigue-induced failure is essential for the safe design and lifetime prediction of engineering structures and components. In this context, the present work provides an overview of some of the main approaches employed for fatigue modelling in metals. First, the classical total-life methods, namely the stress–life and strain–life approaches, are reviewed. Subsequently, fracture-based approaches to fatigue are presented, including formulations grounded in fracture mechanics, continuum damage mechanics, and phase-field theory. The finite element method and the extended finite element method are also discussed as representative numerical frameworks for the implementation of these formulations. The reviewed approaches are then critically compared, and their main characteristics are summarized in a comparative table. Finally, the principal features of the presented approaches are highlighted.
- Open Access
- 1 October 2025
- Published by Universidad Centroamericana Jose Siemon Canas UCA El Salvador-Biblioteca P. Florentino Idoate, S.J. in Investigaciones Latinoamericanas en Ingeniería y Arquitectura
- No. 2,p. 81-94
Vulnerabilidad sísmica de las construcciones del centro histórico de la Ciudad de Salta – Argentina
The objective of this study is to assess the seismic vulnerability of buildings in the City of Salta and their socio-economic impact, using seismic risk analysis methods and Geographic Information System (GIS) tools. In this first stage, nine blocks of the city’s historic centre were studied. The study involved the collection and digitization of existing technical documentation approved by the Municipality of Salta, a photogrammetric survey, and an assessment of the socioeconomic level of the study area. The Italian Vulnerability Index Method was applied to determine vulnerability indices, which were then related to damage indices through vulnerability functions. The results obtained made it possible to generate Vulnerability Index maps for different building typologies. The interdisciplinary work between researchers from the Faculties of Engineering, Economic, Legal and Social Sciences, and Natural Sciences of the National University of Salta (UNSa), together with professionals and authorities from the Professional Council of Engineers and Related Professions of the Province of Salta (COPAIPA), is a key highlight of this project.
- 1 October 2025
- Published by Universidad Centroamericana Jose Siemon Canas UCA El Salvador-Biblioteca P. Florentino Idoate, S.J. in Investigaciones Latinoamericanas en Ingeniería y Arquitectura
- No. 2,p. 81-94
Open AccessVulnerabilidad sísmica de las construcciones del centro histórico de la Ciudad de Salta – Argentina
The objective of this study is to assess the seismic vulnerability of buildings in the City of Salta and their socio-economic impact, using seismic risk analysis methods and Geographic Information System (GIS) tools. In this first stage, nine blocks of the city’s historic centre were studied. The study involved the collection and digitization of existing technical documentation approved by the Municipality of Salta, a photogrammetric survey, and an assessment of the socioeconomic level of the study area. The Italian Vulnerability Index Method was applied to determine vulnerability indices, which were then related to damage indices through vulnerability functions. The results obtained made it possible to generate Vulnerability Index maps for different building typologies. The interdisciplinary work between researchers from the Faculties of Engineering, Economic, Legal and Social Sciences, and Natural Sciences of the National University of Salta (UNSa), together with professionals and authorities from the Professional Council of Engineers and Related Professions of the Province of Salta (COPAIPA), is a key highlight of this project.
- Open Access
- 27 August 2025
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 328
Development of a thermomechanical model for fracture under monotonic and cyclic loading with enhanced strain accuracy
- 27 August 2025
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 328
Open AccessDevelopment of a thermomechanical model for fracture under monotonic and cyclic loading with enhanced strain accuracy
- 9 December 2022
- Published by Wiley in Structural Concrete
- Vol. 24 (1) , 257-268
Basis for calculation the residual mechanical properties of corroding bars
Corrosion of steel reinforcement is known to affect the residual bearing capacity of the structure. The loss of metal supposes a decrease of the sectional area of the reinforcing bar, either homogeneously distributed or concentrated in some zones. The morphology of the corroded area is a critical issue because while the uniform loss is influencing the steel strength, when it is localized also the ductility is reduced due the local stress concentration. There are previous publications showing the impact of corrosion on some mechanical aspects of the steel as on the ductility, the strength or the elastic modulus, but still we lack of a comprehensive framework of all types of corrosion. In this work a classification is made of the types of damages for better assessing their consequences. Further, through application of basic classical mechanics are given expressions to calculate the “corrosion factor” related to the yield strength, the ultimate strength, the elastic modulus and the elongation (ductility). Finally, through fracture mechanics and an energetic approach are given the expressions for the critical stress intensity factor and the “apparent” residual section “loss” of the corroded steel bars.
- 9 December 2022
- Published by Wiley in Structural Concrete
- Vol. 24 (1) , 257-268
Basis for calculation the residual mechanical properties of corroding bars
Corrosion of steel reinforcement is known to affect the residual bearing capacity of the structure. The loss of metal supposes a decrease of the sectional area of the reinforcing bar, either homogeneously distributed or concentrated in some zones. The morphology of the corroded area is a critical issue because while the uniform loss is influencing the steel strength, when it is localized also the ductility is reduced due the local stress concentration. There are previous publications showing the impact of corrosion on some mechanical aspects of the steel as on the ductility, the strength or the elastic modulus, but still we lack of a comprehensive framework of all types of corrosion. In this work a classification is made of the types of damages for better assessing their consequences. Further, through application of basic classical mechanics are given expressions to calculate the “corrosion factor” related to the yield strength, the ultimate strength, the elastic modulus and the elongation (ductility). Finally, through fracture mechanics and an energetic approach are given the expressions for the critical stress intensity factor and the “apparent” residual section “loss” of the corroded steel bars.
- 29 November 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (5) , 1167-1181
Novel approach combining two homogenization procedures for the analysis of nonwoven biocomposites
Composite materials with complex internal microstructures, such as the flax nonwoven bio-composite studied in this work, require advanced numerical models in order to predict their mechanical performance. Otherwise, the micro-structural interactions that take place between their components makes very difficult to obtain their mechanical properties and failure mechanisms. This paper presents a novel methodology that couples two homogenization formulations: a phenomenological one, the serial-parallel mixing theory; and a numerical multiscale procedure. The resulting methodology has a minimal computational cost, while it is capable to account for the different interactions that take place among the composite constituents. With the proposed approach, it is possible to characterize the mechanical response of nonwoven composites and to predict their structural failure. The methodology developed is applied to a flax nonwoven bio-composite manufactured and tested by the German Aerospace Center (DLR). The good results obtained from the simulation, when compared with the experimental values, allow considering the proposed procedure an excellent approach for the analysis of large structures made with complex microstructures, such as nonwoven biocomposites.
- 29 November 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (5) , 1167-1181
Novel approach combining two homogenization procedures for the analysis of nonwoven biocomposites
Composite materials with complex internal microstructures, such as the flax nonwoven bio-composite studied in this work, require advanced numerical models in order to predict their mechanical performance. Otherwise, the micro-structural interactions that take place between their components makes very difficult to obtain their mechanical properties and failure mechanisms. This paper presents a novel methodology that couples two homogenization formulations: a phenomenological one, the serial-parallel mixing theory; and a numerical multiscale procedure. The resulting methodology has a minimal computational cost, while it is capable to account for the different interactions that take place among the composite constituents. With the proposed approach, it is possible to characterize the mechanical response of nonwoven composites and to predict their structural failure. The methodology developed is applied to a flax nonwoven bio-composite manufactured and tested by the German Aerospace Center (DLR). The good results obtained from the simulation, when compared with the experimental values, allow considering the proposed procedure an excellent approach for the analysis of large structures made with complex microstructures, such as nonwoven biocomposites.
- 30 October 2022
- Published by Elsevier in Composite Structures
- Vol. 304
A theoretical homogenized constitutive model formulation for matrix composite materials reinforced with curved fibers
- 30 October 2022
- Published by Elsevier in Composite Structures
- Vol. 304
A theoretical homogenized constitutive model formulation for matrix composite materials reinforced with curved fibers
- Open Access
- 30 August 2022
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 400
A unified non-linear energy dissipation-based plastic-damage model for cyclic loading
- 30 August 2022
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 400
Open AccessA unified non-linear energy dissipation-based plastic-damage model for cyclic loading
- 27 December 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (10) , 1512-1525
Numerical Study of Vibrations Induced by Traffic in Structures and a Screen Alternative for Its Mitigation
The effect of traffic vibrations on buildings is of special interest as its sources have multiplied becoming a concern for residents or for those who work, visit or preserve buildings of heritage value. The problem has their origin in characteristics such as the deterioration of the roads or concentration of public transport routes in adjacent streets. The effect of these vibrations has been the object of study in recent years, with works referred to especially experimental determinations, whose results can be used to assess whether the measurements obtained are within accepted values by some regulations. These results can also be used to calibrate global numerical models to determine this influence analyzing attenuation measures. This paper proposes a global model of finite elements that allows dealing with the treatment of traffic-induced vibrations in structures and analyzing an alternative of solution according to the location. The model includes the building under study, land and surrounding constructions to have orientative results of the whole including its boundary conditions. The actions caused by the traffic are established through impulses that define the load states to be applied. Finally, an alternative is proposed to analyze the options to mitigate the effect of the generated vibrations.
- 27 December 2019
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 15 (10) , 1512-1525
Numerical Study of Vibrations Induced by Traffic in Structures and a Screen Alternative for Its Mitigation
The effect of traffic vibrations on buildings is of special interest as its sources have multiplied becoming a concern for residents or for those who work, visit or preserve buildings of heritage value. The problem has their origin in characteristics such as the deterioration of the roads or concentration of public transport routes in adjacent streets. The effect of these vibrations has been the object of study in recent years, with works referred to especially experimental determinations, whose results can be used to assess whether the measurements obtained are within accepted values by some regulations. These results can also be used to calibrate global numerical models to determine this influence analyzing attenuation measures. This paper proposes a global model of finite elements that allows dealing with the treatment of traffic-induced vibrations in structures and analyzing an alternative of solution according to the location. The model includes the building under study, land and surrounding constructions to have orientative results of the whole including its boundary conditions. The actions caused by the traffic are established through impulses that define the load states to be applied. Finally, an alternative is proposed to analyze the options to mitigate the effect of the generated vibrations.