CKCalum Kinnear

Calum Kinnear

*This is an algorithmically generated author record based on publicly available information.

Calum Kinnear has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A General Method for Direct Assembly of Single Nanocrystals

    by Heyou Zhang, Yawei Liu, Arun Ashokan, Can Gao, Yue Dong, Calum Kinnear, Nicholas Kirkwood, Samantha Zaman, Fatemeh Maasoumi, Timothy D. James, et al.

    Controlled nanocrystal assembly is a pre‐requisite for incorporation of these materials into solid state devices. Many assembly methods have been investigated which target precise nanocrystal positioning, high process controllability, scalability, and universality. However, most methods are unable to achieve all of these goals. Here, surface templated electrophoretic deposition (STED) is presented as a potential assembly method for a wide variety of nanocrystals. Controlled positioning and deposition of a wide range of nanocrystals into arbitrary spatial arrangements − including gold nanocrystals of different shapes and sizes, magnetic nanocrystals, fluorescent organic nanoparticles, and semiconductor quantum dots − is demonstrated. Nanoparticles with diameters <10 nm are unable to be deposited due to their low surface charge and strong Brownian motion (low Péclet number). It is shown that this limit can be circumvented by forming clusters of nanocrystals or by silica coating nanocrystals to increase their effective size.


  • Dual Photolytic Pathways in an Alloyed Plasmonic Near-Perfect Absorber: Implications for Photoelectrocatalysis

    by Qi Xiao, Calum Kinnear, Timothy U. Connell, Muhammad Kalim Kashif, Christopher D. Easton, Aaron Seeber, Laure Bourgeois, Gus. O. Bonin, Noel W. Duffy, Anthony S. R. Chesman, et al.


  • Practical guides for x-ray photoelectron spectroscopy: Analysis of polymers

    by Christopher D. Easton, Calum Kinnear, Sally L. McArthur, Thomas R. Gengenbach

    XPS is widely used to identify and quantify the elements present at the surface of polymeric materials. The energy distribution of photoelectrons emitted from these elements contains information about their chemical state, potentially allowing the analyst to identify and quantify specific functional groups. These functional groups may originate from the synthesis and processing of the polymers, from postsynthetic modifications such as surface grafting, or indeed may be unrelated to the polymer (additives and contaminants). Extracting reliable and meaningful information from XPS data is not trivial and relies on careful and appropriate experimentation, including experimental design, sample preparation, data collection, data processing, and data interpretation. Here, the authors outline some of these challenges when performing XPS analysis of polymers and provide practical examples to follow. This guide will cover all relevant aspects over the course of a typical experiment, including tips and considerations when designing the experiment, sample preparation, charge neutralization, x-ray induced sample damage, depth profiling, data analysis and interpretation, and, finally, reporting of results. Many of these topics are more widely applicable to insulating organic materials, and the recommendations of this guide will help to ensure that data is collected and interpreted using current best practices.


  • Particokinetics and in vitro dose of high aspect ratio nanoparticles

    by Seth Richard Price, Calum Kinnear, Sandor Balog

    Computational particokinetics models become essential in the design and interpretation of in vitro nanoparticle toxicology assays involving submerged adherent cell cultures. Yet, none of the current models offers the possibility of addressing the delivered dose of high-aspect ratio nanoparticles, including nanorods, nanotubes, and nanofibers. Here we present a straightforward method that lends this ability to any of the models used currently.


  • Beyond Global Charge: Role of Amine Bulkiness and Protein Fingerprint on Nanoparticle–Cell Interaction

    by David Burnand, Ana Milosevic, Sandor Balog, Miguel Spuch‐Calvar, Barbara Rothen‐Rutishauser, Jörn Dengjel, Calum Kinnear, Thomas L. Moore, Alke Petri‐Fink

    Amino groups presented on the surface of nanoparticles are well‐known to be a predominant factor in the formation of the protein corona and subsequent cellular uptake. However, the molecular mechanism underpinning this relationship is poorly defined. This study investigates how amine type and density affect the protein corona and cellular association of gold nanoparticles with cells in vitro. Four specific poly(vinyl alcohol‐co‐N‐vinylamine) copolymers are synthesized containing primary, secondary, or tertiary amines. Particle cellular association (i.e., cellular uptake and surface adsorption), as well as protein corona composition, are then investigated. It is found that the protein corona (as a consequence of “amine bulkiness”) and amine density are both important in dictating cellular association. By evaluating the nanoparticle surface chemistry and the protein fingerprint, proteins that are significant in mediating particle–cell association are identified. In particular, primary amines, when exposed on the polymer side chain, are strongly correlated with the presence of alpha‐2‐HS‐glycoprotein, and promote nanoparticle cellular association.


  • Open Access

    Direct Assembly of Large Area Nanoparticle Arrays

    by Heyou Zhang, Jasper Cadusch, Calum Kinnear, Timothy James, Ann Roberts, Paul Mulvaney

    A major goal of nanotechnology is the assembly of nanoscale building blocks into functional optical, electrical or chemical devices. Many of these applications depend on an ability to optically or electrically address single nanoparticles. However, positioning large numbers of single nanocrystals with nanometre precision on a substrate for integration into solid-state devices, remains a fundamental roadblock. Here, we report fast, scalable assembly of thousands of single nanoparticles using electrophoretic deposition. We demonstrate that gold nanospheres, down to 30 nm in size, and gold nanorods < 100nm in length can be assembled into pre-defined patterns on transparent conductive substrates within a few seconds. We find that rod orientation can be preserved during deposition. We also show that arrays of nanorod dimers can be assembled with end-to-end separations down to 50 nm. As proof of high fidelity scale-up, we have created centimetre scale patterns comprising more than 1 million gold nanoparticles.


  • Directed Chemical Assembly of Single and Clustered Nanoparticles with Silanized Templates

    by Calum Kinnear, Jasper Cadusch, Heyou Zhang, Jianing Lu, Timothy D. James, Ann Roberts, Paul Mulvaney

    Assembly of nanoscale materials into arbitrary, organized structures remains a major challenge in nanotechnology. Herein, we report a general method for creating 2D structures by combining top-down lithography with bottom-up chemical assembly. Under optimal conditions, assembly of gold nanoparticles was achieved in less than 30 minutes. Single gold nanoparticles, from 10 to 100 nm, can be placed in predetermined patterns with high fidelity, and higher order structures can be generated consisting of dimers or trimers. It is shown that the nanoparticle arrays can be transferred to, and embedded within, polymer films. This provides a new method for the large-scale fabrication of nanoparticle arrays onto diverse substrates using wet chemistry.


  • Open Access

    Snapshot Hyperspectral Imaging (SHI) for Revealing Irreversible and Heterogeneous Plasmonic Processes

    by Silke Regine Kirchner, Kyle Warren Smith, Benjamin S. Hoener, Sean S. E. Collins, Wenxiao Wang, Yi-Yu Cai, Calum Kinnear, Heyou Zhang, Wei-Shun Chang, Paul Mulvaney, et al.

    Plasmon-mediated processes provide unique opportunities for selective photocatalysis, photovoltaics, and electrochemistry. Determining the influence of particle heterogeneity is an unsolved problem because often such processes introduce irreversible changes to the nano-catalysts and/or their surroundings. The challenge lies in monitoring heterogeneous non-equilibrium dynamics via the slow, serial methods that are intrinsic to almost all spectral acquisition methods with suitable spatial and/or spectral resolution. Here, we present a new metrology - snapshot hyperspectral imaging (SHI) - that facilitates in situ readout of the 0th and 1st order diffractions of the dark-field scattering from many individual plasmonic nanoparticles to simultaneously extract their respective spectra. Evanescent wave excitation with a supercontinuum laser enabled signal-to-noise ratios greater than 100 with a time resolution of only 1 ms. Throughput of ~ 100 simultaneous spectra was achieved with a highly ordered nanoparticle array, yielding a spectral resolution of 0.21 nm/pixel. Additionally, an alternative dark-field excitation geometry utilized a combination of a supercontinuum laser and a reflecting objective for polarization controlled SHI. With SHI it will be possible to understand the influence of particle heterogeneity on the kinetics of irreversible plasmon-mediated processes, and in general advance a variety of research fields in nanoscience and nanotechnology.


  • Top Cited Papers

    Form Follows Function: Nanoparticle Shape and Its Implications for Nanomedicine

    by Calum Kinnear, Thomas L. Moore, Laura Rodriguez-Lorenzo, Barbara Rothen-Rutishauser, Alke Petri-Fink

    This review is a comprehensive description of the past decade of research into understanding how the geometry and size of nanoparticles affect their interaction with biological systems: from single cells to whole organisms. Recently, there has been a great deal of effort to use both the shape and the size of nanoparticles to target specific cellular uptake mechanisms, biodistribution patterns, and pharmacokinetics. While the successes of spherical lipid-based nanoparticles have heralded marked changes in chemotherapy worldwide, the history of asbestos-induced lung disease casts a long shadow over fibrous materials to date. The impact of particle morphology is known to be intertwined with many physicochemical parameters, namely, size, elasticity, surface chemistry, and biopersistence. In this review, we first highlight some of the morphologies observed in nature as well as shapes available to us through synthetic strategies. Following this we discuss attempts to understand the cellular uptake of nanoparticles through various theoretical models before comparing this with observations from in vitro and in vivo experiments. In addition, we consider the impact of nanoparticle shape at different size regimes on targeting, cytotoxicity, and cellular mechanics.


  • Assumption-free morphological quantification of single anisotropic nanoparticles and aggregates

    by Dimitri Vanhecke, Laura Rodríguez-Lorenzo, Calum Kinnear, Estelle Durantie, Barbara Rothen-Rutishauser, Alke Petri-Fink

    Characterizing the morphometric parameters of noble metal nanoparticles for sensing and catalysis is a persistent challenge due to their small size and complex shape. Herein, we present an approach to determine the volume, surface area, and curvature of non-symmetric anisotropic nanoparticles using electron tomography and design-based stereology without the use of segmentation tools or modeling of the particles. Finally, we apply these tools to aggregates to estimate their fractal dimension.