Ammapalayam Ramasamy Krishnaraja
Research Subjects
Ammapalayam Ramasamy Krishnaraja has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Ponnusamy Kulanthaivel
Department of Civil Engineering, Kongu Engineering College, Perundurai, India
5 shared publications - Anandakumar Subbaiyan
Meenakshi College of Engineering, India
2 shared publications - Balu Soundara
Department of Civil Engineering, College of Engineering Guindy, Anna University, Chennai, India
2 shared publications - Kathiresan Karuppanan
School of Civil Engineering and Architecture, Adama Science and Technology University, Adama, Ethiopia
2 shared publications - Kinipalayam Eswaran Viswanathan
Builders Engineering College, India
2 shared publications - Krishnamoorthy Sampath Kumar
Kongu Engineering College, India
2 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Experimental investigation of fiber hybridized ECC using PVA, polypropylene, and high-modulus glass fibers with class F Fly ash and OPC
Conventional concrete is inherently brittle and exhibits limited tensile strain capacity, leading to crack localization and reduced durability. Engineered cementitious composites (ECC) have been developed to overcome these limitations through strain-hardening behavior and improved ductility. In this study, polyvinyl alcohol (PVA), polypropylene (PP), and high-modulus glass (HMG) fiber-reinforced hybrid engineered cementitious composites (HECC) are investigated to evaluate their development and performance. The cementitious binder comprised OPC 53 grade, and Class F fly ash (FA), and fiber hybridization was employed to enhance strain hardening, strength, and ductility. Three ECC mixes were developed: a control mix (ECC) with 2.0% PVA fibers, HECC1 with 1.35% PVA and 0.65% PP fibers, and HECC2 with 1.35% PVA and 0.65% HMG fibers. Mechanical and microstructural properties were evaluated through comprehensive experimental investigations, including Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), compressive strength, flexural strength, elastic modulus, and uniaxial tensile tests. The results indicate that at 28 days, HECC2 achieved the highest compressive strength (53 MPa) and flexural strength (15.5 MPa), primarily due to the high stiffness of HMG fibers. In contrast, HECC1 exhibited superior ductility and energy absorption capacity owing to the high elongation characteristics of PP fibers. The findings emphasize the importance of optimal mix design, specifically the volume fraction and fiber type, in customizing the mechanical performance of ECC for structural applications.
- 7 October 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Open AccessExperimental investigation of fiber hybridized ECC using PVA, polypropylene, and high-modulus glass fibers with class F Fly ash and OPC
Conventional concrete is inherently brittle and exhibits limited tensile strain capacity, leading to crack localization and reduced durability. Engineered cementitious composites (ECC) have been developed to overcome these limitations through strain-hardening behavior and improved ductility. In this study, polyvinyl alcohol (PVA), polypropylene (PP), and high-modulus glass (HMG) fiber-reinforced hybrid engineered cementitious composites (HECC) are investigated to evaluate their development and performance. The cementitious binder comprised OPC 53 grade, and Class F fly ash (FA), and fiber hybridization was employed to enhance strain hardening, strength, and ductility. Three ECC mixes were developed: a control mix (ECC) with 2.0% PVA fibers, HECC1 with 1.35% PVA and 0.65% PP fibers, and HECC2 with 1.35% PVA and 0.65% HMG fibers. Mechanical and microstructural properties were evaluated through comprehensive experimental investigations, including Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), compressive strength, flexural strength, elastic modulus, and uniaxial tensile tests. The results indicate that at 28 days, HECC2 achieved the highest compressive strength (53 MPa) and flexural strength (15.5 MPa), primarily due to the high stiffness of HMG fibers. In contrast, HECC1 exhibited superior ductility and energy absorption capacity owing to the high elongation characteristics of PP fibers. The findings emphasize the importance of optimal mix design, specifically the volume fraction and fiber type, in customizing the mechanical performance of ECC for structural applications.
- Open Access
- 13 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Engineered cementitious composites with nano calcium carbonate and corona waste mask fibers for sustainable 3D printing applications
Engineered cementitious composites (ECC) are ductile cement-based materials developed to overcome the brittleness of conventional concrete by exhibiting strain-hardening behaviour and improved crack control under tensile loading. The use of waste polypropylene fibres obtained from discarded COVID-19 face masks offers a sustainable approach to enhancing ECC performance, while nano calcium carbonate (NCC), a comparatively economical nanomaterial, improves particle packing and interfacial bonding in cementitious systems. This study examines the combined influence of NCC and modified corona waste mask fibres (CWMF) on the fresh, physical, and mechanical properties of 3D printed cement-based mortar, with NCC incorporated in the range of 0-4% by weight of cement. The results show that increasing NCC content reduces fluidity but significantly improves the buildability of the mixes. The dry density of the 3D printed specimens increased up to an optimum NCC content of 3% and decreased thereafter, while water absorption exhibited a similar trend. Mechanical properties evaluated at the designated test age indicate that compressive, flexural, and splitting tensile strengths attained optimum values at 3% NCC. At this NCC level, the 3D printed specimens consistently demonstrated superior mechanical performance compared to conventionally cast samples, indicating the effectiveness of NCC-CWMF modified mixes for 3D concrete printing applications.
- 13 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Open AccessEngineered cementitious composites with nano calcium carbonate and corona waste mask fibers for sustainable 3D printing applications
Engineered cementitious composites (ECC) are ductile cement-based materials developed to overcome the brittleness of conventional concrete by exhibiting strain-hardening behaviour and improved crack control under tensile loading. The use of waste polypropylene fibres obtained from discarded COVID-19 face masks offers a sustainable approach to enhancing ECC performance, while nano calcium carbonate (NCC), a comparatively economical nanomaterial, improves particle packing and interfacial bonding in cementitious systems. This study examines the combined influence of NCC and modified corona waste mask fibres (CWMF) on the fresh, physical, and mechanical properties of 3D printed cement-based mortar, with NCC incorporated in the range of 0-4% by weight of cement. The results show that increasing NCC content reduces fluidity but significantly improves the buildability of the mixes. The dry density of the 3D printed specimens increased up to an optimum NCC content of 3% and decreased thereafter, while water absorption exhibited a similar trend. Mechanical properties evaluated at the designated test age indicate that compressive, flexural, and splitting tensile strengths attained optimum values at 3% NCC. At this NCC level, the 3D printed specimens consistently demonstrated superior mechanical performance compared to conventionally cast samples, indicating the effectiveness of NCC-CWMF modified mixes for 3D concrete printing applications.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 31
Optimization and assessment of concrete performance using ceramic waste and polypropylene fibers
The current research examines the mechanical and durability performances of concrete blended with ceramic waste powder (CWP) as partial cement substitute in conjunction with the use of polypropylene (PP) fibers. The experimental design considered the influence of different amounts of CWP and polypropylene fiber reinforcement on the tested parameters. Response Surface Methodology (RSM) was applied in this investigation for optimization and modelling purposes. In this regard, it is clear from the results obtained that 20% CWP with polypropylene fiber reinforcement (CCF + Cr20) represents the optimum mix. This mix gives rise to maximum compressive strength (44.8 N/mm2), which translates into a relative improvement by 33.75% when compared to control concrete. For the same mixture, the split tensile strength was recorded to be 5.6 N/mm2 (improved by 47.35%) whereas the flexural and shear strengths amounted to 7.5 N/mm2 (improvement by 66.65%) and 7.8 N/mm2 (+15.38%), respectively. The mix was seen to show resistance to acidic action and reduced chloride ion penetration. The prediction capability of RSM models developed in this work was validated with an average percentage error of 1.16%, 2.32%, 0.95% and 1.06% for compressive, tensile, flexural and shear strength predictions, respectively. This study concludes that 20% CWP combined with fiber reinforcement provides an optimal balance between mechanical performance, durability, and sustainability.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 31
Open AccessOptimization and assessment of concrete performance using ceramic waste and polypropylene fibers
The current research examines the mechanical and durability performances of concrete blended with ceramic waste powder (CWP) as partial cement substitute in conjunction with the use of polypropylene (PP) fibers. The experimental design considered the influence of different amounts of CWP and polypropylene fiber reinforcement on the tested parameters. Response Surface Methodology (RSM) was applied in this investigation for optimization and modelling purposes. In this regard, it is clear from the results obtained that 20% CWP with polypropylene fiber reinforcement (CCF + Cr20) represents the optimum mix. This mix gives rise to maximum compressive strength (44.8 N/mm2), which translates into a relative improvement by 33.75% when compared to control concrete. For the same mixture, the split tensile strength was recorded to be 5.6 N/mm2 (improved by 47.35%) whereas the flexural and shear strengths amounted to 7.5 N/mm2 (improvement by 66.65%) and 7.8 N/mm2 (+15.38%), respectively. The mix was seen to show resistance to acidic action and reduced chloride ion penetration. The prediction capability of RSM models developed in this work was validated with an average percentage error of 1.16%, 2.32%, 0.95% and 1.06% for compressive, tensile, flexural and shear strength predictions, respectively. This study concludes that 20% CWP combined with fiber reinforcement provides an optimal balance between mechanical performance, durability, and sustainability.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 30, e20240697
Flexural performance of reinforced concrete beam with layer of hybrid strain-hardening cementitious composites
This research paper aims to develop hybrid fibre-reinforced Engineered Cementitious Composites (ECC) deploying different modulus of fibre and to explore the mechanical and flexural response of newly refined Hybrid ECC in the 30 mm thick bottom layer of reinforced concrete (RC) beams. This investigation uses five combinations in the RC beam. The focus of hybridization is to increase the flexural response and structural functioning of RC beams. ECC mixes were attempted with the deployment of Polyvinyl Alcohol (PVA) Fibre and Polypropylene (PP) fibre with 2% as a mono fibremix. Hybridization is made with 0.65% of PVA and 1.35% of PP, 1% of PVA and 1% of PP, 1.35% of PVA, and 0.65% of PP. In this research investigation, mono fibre ECC with 2.0 % PVA fibre mix was taken as a base mix for comparison. From the behavior of the beam, it was found that the mix with PVA fibre of 1.35% hybrid with PP fibre of 0.65% exhibited better performance in flexural when compared with conventional concrete. However, PP fibre of 2% volume fraction has high energy absorption capacity, and PVA fibre of 2% volume fraction has high ductile displacement compared to conventional concrete.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 30, e20240697
Open AccessFlexural performance of reinforced concrete beam with layer of hybrid strain-hardening cementitious composites
This research paper aims to develop hybrid fibre-reinforced Engineered Cementitious Composites (ECC) deploying different modulus of fibre and to explore the mechanical and flexural response of newly refined Hybrid ECC in the 30 mm thick bottom layer of reinforced concrete (RC) beams. This investigation uses five combinations in the RC beam. The focus of hybridization is to increase the flexural response and structural functioning of RC beams. ECC mixes were attempted with the deployment of Polyvinyl Alcohol (PVA) Fibre and Polypropylene (PP) fibre with 2% as a mono fibremix. Hybridization is made with 0.65% of PVA and 1.35% of PP, 1% of PVA and 1% of PP, 1.35% of PVA, and 0.65% of PP. In this research investigation, mono fibre ECC with 2.0 % PVA fibre mix was taken as a base mix for comparison. From the behavior of the beam, it was found that the mix with PVA fibre of 1.35% hybrid with PP fibre of 0.65% exhibited better performance in flexural when compared with conventional concrete. However, PP fibre of 2% volume fraction has high energy absorption capacity, and PVA fibre of 2% volume fraction has high ductile displacement compared to conventional concrete.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 30, e20240671
Enhancing flexural capacity and crack resistance of two-span continuous beams with engineered cementitious composite (ECC) under static loading conditions
This study examined the behavior of two-span continuous beams reinforced with Engineered Cementitious Composite (ECC) under static loads, showcasing ECC’s significant ability to enhance the flexural strength, durability, and overall resilience of conventional concrete structures. The research focused on assessing how ECC layers contribute to the structural integrity, load-bearing capacity, and crack development of the beams, utilizing a mix of materials including Ordinary portland cement (OPC) 43 Grade, fly ash, manufactured sand, polypropylene fibers, silica fume, superplasticizer, water, and coarse aggregates. The flexural tests indicated that replacing traditional concrete with ECC led to substantial improvements in load-carrying capacity and ductility, with ECC’s unique properties resulting in reduced crack widths and spacing in tension zones. Additionally, the study highlighted ECC’s advantages in terms of energy absorption and post-cracking behavior, suggesting that beams with ECC could exhibit longer service life and lower maintenance requirements. The integration of ECC also enhanced protection for the longitudinal reinforcement, indicating its potential for use in seismic-resistant designs and other high-performance applications. Overall, the findings underscore ECC’s transformative role in improving the performance and sustainability of concrete structures in modern engineering.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 30, e20240671
Open AccessEnhancing flexural capacity and crack resistance of two-span continuous beams with engineered cementitious composite (ECC) under static loading conditions
This study examined the behavior of two-span continuous beams reinforced with Engineered Cementitious Composite (ECC) under static loads, showcasing ECC’s significant ability to enhance the flexural strength, durability, and overall resilience of conventional concrete structures. The research focused on assessing how ECC layers contribute to the structural integrity, load-bearing capacity, and crack development of the beams, utilizing a mix of materials including Ordinary portland cement (OPC) 43 Grade, fly ash, manufactured sand, polypropylene fibers, silica fume, superplasticizer, water, and coarse aggregates. The flexural tests indicated that replacing traditional concrete with ECC led to substantial improvements in load-carrying capacity and ductility, with ECC’s unique properties resulting in reduced crack widths and spacing in tension zones. Additionally, the study highlighted ECC’s advantages in terms of energy absorption and post-cracking behavior, suggesting that beams with ECC could exhibit longer service life and lower maintenance requirements. The integration of ECC also enhanced protection for the longitudinal reinforcement, indicating its potential for use in seismic-resistant designs and other high-performance applications. Overall, the findings underscore ECC’s transformative role in improving the performance and sustainability of concrete structures in modern engineering.
- 17 February 2024
- Published by Springer Nature in International Journal of Environmental Research
- Vol. 18  (2) , 1-14
Sustainable Reuse of Shredded Face Mask in Biopolymer Treated Expansive Soil
- 17 February 2024
- Published by Springer Nature in International Journal of Environmental Research
- Vol. 18  (2) , 1-14
Sustainable Reuse of Shredded Face Mask in Biopolymer Treated Expansive Soil
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29  (3) , e20240353
Comparative study on structural behavior of RC beam under static load using fly ash from micro to nano scale
Researchers are working towards achieving the good strength, finding sustainable material, high performance; improve the structural & durability behaviour etc., of the concrete. This study focuses on the analysis and benefits of addition of raw (RFAC), ultra fine (UFFAC) and nano fly ash (NFAC) on its optimum level in the concrete. The optimum content of raw, ultra fine and nano fly ash is 19%, 22% & 23% are obtained through mechanical properties tests. To find the flexural performance of reinforced concrete beam, the specimen of 2000 mm*100 mm*150 mm has been designed to with stand the load of 35kN. Under the static load, the parameters of load vs. mid span deflection, moment vs. rotation, ductility, energy absorption are calculated and all the results were compared with conventional (CC) specimen. Among all the specimens, NFAC specimens have performed well and the minor cracks are developed due to its high bond between the ingredients. The load carrying capacity of the NFAC specimen has been improved about 9.23%, 8.64% and 5.20%, the deflection has been reduced by 12.32%, 9.70% and 1.63%, also the moment carrying capacity of the NFAC specimen has been improved by 19.66%, 12.90% and 5.26% with respect to CC, RFAC and UFFAC specimens.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29  (3) , e20240353
Open AccessComparative study on structural behavior of RC beam under static load using fly ash from micro to nano scale
Researchers are working towards achieving the good strength, finding sustainable material, high performance; improve the structural & durability behaviour etc., of the concrete. This study focuses on the analysis and benefits of addition of raw (RFAC), ultra fine (UFFAC) and nano fly ash (NFAC) on its optimum level in the concrete. The optimum content of raw, ultra fine and nano fly ash is 19%, 22% & 23% are obtained through mechanical properties tests. To find the flexural performance of reinforced concrete beam, the specimen of 2000 mm*100 mm*150 mm has been designed to with stand the load of 35kN. Under the static load, the parameters of load vs. mid span deflection, moment vs. rotation, ductility, energy absorption are calculated and all the results were compared with conventional (CC) specimen. Among all the specimens, NFAC specimens have performed well and the minor cracks are developed due to its high bond between the ingredients. The load carrying capacity of the NFAC specimen has been improved about 9.23%, 8.64% and 5.20%, the deflection has been reduced by 12.32%, 9.70% and 1.63%, also the moment carrying capacity of the NFAC specimen has been improved by 19.66%, 12.90% and 5.26% with respect to CC, RFAC and UFFAC specimens.
- Open Access
- 12 October 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 48  (3) , 1573-1579
An Experimental Analysis of Precipitated Silica in Petroleum-Contaminated Clay for the Strengthening of Soil Characteristics
In recent times, the environmental impacts of petroleum-contaminated clay (PC clay) have intensified, leading to more severe detrimental effects. To address this issue, the use of precipitated silica (P silica) has proven to be an effective solution. P silica offers improved treatment for the contaminated clay and enhances the engineering properties of the soil. A series of experiments such as pH test, electrical conductivity test, unconfined compressive strength (UCS) test, California bearing ratio (CBR) test, free swell index (FSI) test, compaction test and Atterberg limit tests were conducted to compare the soil characteristics of the PC clay with and without the treatment of P silica. The PC clay soil specimens were tested after the inclusion of P silica with varying dosages of 0%, 3%, 6%, 9% and 12% by dry weight of clay soil. The inclusion of P silica at a dosage of 6% resulted in the optimum strength of 275.12 kPa. This dosage also led to a reduction in free swell index (FSI) and maximum dry density (MDD), indicating a flocculation mechanism caused by the presence of P silica. Additionally, there was an improvement in stiffness and strength parameters, as evidenced by the enhancement in CBR (California bearing ratio). Therefore, the effective utilization of P silica in contaminated clay soil provides a variety of applications in the geotechnical field.
- 12 October 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 48  (3) , 1573-1579
Open AccessAn Experimental Analysis of Precipitated Silica in Petroleum-Contaminated Clay for the Strengthening of Soil Characteristics
In recent times, the environmental impacts of petroleum-contaminated clay (PC clay) have intensified, leading to more severe detrimental effects. To address this issue, the use of precipitated silica (P silica) has proven to be an effective solution. P silica offers improved treatment for the contaminated clay and enhances the engineering properties of the soil. A series of experiments such as pH test, electrical conductivity test, unconfined compressive strength (UCS) test, California bearing ratio (CBR) test, free swell index (FSI) test, compaction test and Atterberg limit tests were conducted to compare the soil characteristics of the PC clay with and without the treatment of P silica. The PC clay soil specimens were tested after the inclusion of P silica with varying dosages of 0%, 3%, 6%, 9% and 12% by dry weight of clay soil. The inclusion of P silica at a dosage of 6% resulted in the optimum strength of 275.12 kPa. This dosage also led to a reduction in free swell index (FSI) and maximum dry density (MDD), indicating a flocculation mechanism caused by the presence of P silica. Additionally, there was an improvement in stiffness and strength parameters, as evidenced by the enhancement in CBR (California bearing ratio). Therefore, the effective utilization of P silica in contaminated clay soil provides a variety of applications in the geotechnical field.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 28  (4) , e20230281
Characterization of nano fly ash and study on durability properties of nano fly ash embedded concrete
Fly ash is used partially as a replacement to cement to make the concrete. Fly ash contains SiO2 and Al2O3, which contribute to increase the strength of concrete. In the current investigation, fly ash has been replaced with varying percentages of nanosize in concrete, and the strength of the resulting hardened concrete has been evaluated. The production of nanosized fly ash has been made by the ball milling process and the analyses has been completed using scanning electron microscope (SEM) and X-ray diffraction (XRD), in order to determine the chemical and physical composition of the nanoparticles of fly ash. The nano fly ash concrete (NFAC) have been undergone for the durability tests of acid, sulphate and chloride attack. The concrete with 23% of nano fly ash replaced with cement performs well against these adverse conditions. The comparison has been made between the conventional (CC), raw fly ash (RFAC) and NFAC. Nano fly ash makes concrete much denser and more resistant to cracking. So the durability behaviour of NFAC is much better than CC and RFAC. The percentage of reduction in strength after durability aspects is varies from 0.03% to 10.75% for the NFAC.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 28  (4) , e20230281
Open AccessCharacterization of nano fly ash and study on durability properties of nano fly ash embedded concrete
Fly ash is used partially as a replacement to cement to make the concrete. Fly ash contains SiO2 and Al2O3, which contribute to increase the strength of concrete. In the current investigation, fly ash has been replaced with varying percentages of nanosize in concrete, and the strength of the resulting hardened concrete has been evaluated. The production of nanosized fly ash has been made by the ball milling process and the analyses has been completed using scanning electron microscope (SEM) and X-ray diffraction (XRD), in order to determine the chemical and physical composition of the nanoparticles of fly ash. The nano fly ash concrete (NFAC) have been undergone for the durability tests of acid, sulphate and chloride attack. The concrete with 23% of nano fly ash replaced with cement performs well against these adverse conditions. The comparison has been made between the conventional (CC), raw fly ash (RFAC) and NFAC. Nano fly ash makes concrete much denser and more resistant to cracking. So the durability behaviour of NFAC is much better than CC and RFAC. The percentage of reduction in strength after durability aspects is varies from 0.03% to 10.75% for the NFAC.
- Open Access
- 16 July 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-7
Performance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution
The thermal properties of polymer fibers namely polyvinyl alcohol fiber (PVA) and polypropylene fiber (PP) have been taken for study to carry out this present work. Simulated pore solution (SPS) is prepared by using the combination of chemicals NaOH, KOH, and Ca(OH)2 with distilled water to study the effect of C-S-H gel formation on fibers. The fibers are dipped in the solution for 35 days. The thermal properties of raw and SPS-dipped fibers are fetched out by performing various tests such as Fourier transform infrared (FTIR) analysis, thermo gravimetric analysis (TGA), differential scanning calorimetry analysis, and scanning electron microscopy (SEM). On analysis, the thermal properties of SPS-dipped fiber have better properties when compared with raw fiber. In FTIR analysis the first broad peak of both raw and SPS-dipped fibers are observed between 3000cm−1 to 2800cm−1 indicating that fibers have strong bond. In TGA analysis noted that the residual mass of raw fiber (77.19) is higher than SPS-dipped fiber (52.33) due to the formation of C-S-H gel formation. DSC analysis showed both endothermic and exothermic reaction under N2 atmosphere.
- 16 July 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-7
Open AccessPerformance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution
The thermal properties of polymer fibers namely polyvinyl alcohol fiber (PVA) and polypropylene fiber (PP) have been taken for study to carry out this present work. Simulated pore solution (SPS) is prepared by using the combination of chemicals NaOH, KOH, and Ca(OH)2 with distilled water to study the effect of C-S-H gel formation on fibers. The fibers are dipped in the solution for 35 days. The thermal properties of raw and SPS-dipped fibers are fetched out by performing various tests such as Fourier transform infrared (FTIR) analysis, thermo gravimetric analysis (TGA), differential scanning calorimetry analysis, and scanning electron microscopy (SEM). On analysis, the thermal properties of SPS-dipped fiber have better properties when compared with raw fiber. In FTIR analysis the first broad peak of both raw and SPS-dipped fibers are observed between 3000cm−1 to 2800cm−1 indicating that fibers have strong bond. In TGA analysis noted that the residual mass of raw fiber (77.19) is higher than SPS-dipped fiber (52.33) due to the formation of C-S-H gel formation. DSC analysis showed both endothermic and exothermic reaction under N2 atmosphere.