Takuma Watanabe
Takuma Watanabe has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hiroyoshi Yamada
Smart Information Systems Program, Faculty of Engineering, Niigata University, Niigata, Japan
10 shared publications - Yoshihiko Akamine
Department of Electrical and Electronic Engineering, Tokyo Institute of Technology, Tokyo, Japan
2 shared publications Motofumi Arii
Mitsubishi Space Software Co., Ltd
1 shared publicationRyoichi Sato
Faculty of Education, Niigata University
1 shared publicationSang-Eun Park
Graduate School of Science and Technology, Niigata University
1 shared publication- Yasuyuki Oishi
Fujitsu Limited
1 shared publication
Latest Publications
- 20 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-13
Image-Based Radar Cross Section Synthesis for a Cluster of Multiple Static Targets
This study proposes a novel image-based method for radar cross-section (RCS) prediction of a cluster of multiple static targets by synthesizing replicas of an original radar image. In this approach, we first measured the near-field backscattering of a target and reconstructed a corresponding radar image. Subsequently, modified copies of this image with rotation, translation, and spatial filtering were generated according to the predefined desired arrangement, and they were coherently summed to create a single synthesized image in which all scattering contributions contained in the modified images were virtually included. Finally, the synthesized image was utilized to predict the far-field RCS of multiple targets based on the theory of image-based near-field-to-far-field transformation (NFFFT). By employing the proposed algorithm, we can avoid building multiple test targets, resulting in reduced production costs. Moreover, we can easily test several different experimental layouts for multiple targets without repeating real measurements. Numerical simulations and experiments are conducted to demonstrate the validity of the proposed image-based RCS synthesis. The measurement results show that the proposed approach is valid when the multiple scattering between targets can be ignored, and the shadowing, which refers to the effect that a target is masked by another target, is insignificant.
- 20 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-13
Image-Based Radar Cross Section Synthesis for a Cluster of Multiple Static Targets
This study proposes a novel image-based method for radar cross-section (RCS) prediction of a cluster of multiple static targets by synthesizing replicas of an original radar image. In this approach, we first measured the near-field backscattering of a target and reconstructed a corresponding radar image. Subsequently, modified copies of this image with rotation, translation, and spatial filtering were generated according to the predefined desired arrangement, and they were coherently summed to create a single synthesized image in which all scattering contributions contained in the modified images were virtually included. Finally, the synthesized image was utilized to predict the far-field RCS of multiple targets based on the theory of image-based near-field-to-far-field transformation (NFFFT). By employing the proposed algorithm, we can avoid building multiple test targets, resulting in reduced production costs. Moreover, we can easily test several different experimental layouts for multiple targets without repeating real measurements. Numerical simulations and experiments are conducted to demonstrate the validity of the proposed image-based RCS synthesis. The measurement results show that the proposed approach is valid when the multiple scattering between targets can be ignored, and the shadowing, which refers to the effect that a target is masked by another target, is insignificant.
- 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Low-Cost Radar Cross Section Measurement With a Resin-Made Model Coated With Conductive Paste
This study aims to provide practical information regarding the development of a cost-effective test model for low-cost radar cross-section (RCS) measurements. Two major possible approaches for reducing the manufacturing cost of a model are replacing the molding material with an inexpensive one and measuring a scaled-down model with a higher operating frequency. In this study, the former was achieved using a resin-made model coated with a conductive paste to imitate a complete metallic model. According to the scaling laws, the entire geometry, including the surface roughness of the model because of the conductive paint, must be appropriately scaled down. Because this roughness scaling is practically infeasible, we experimentally prove that, if an appropriate molding material is selected, shape-only scaling is valid without roughness scaling. As a preliminary study, two types of polyurethane resins with different densities were tested for their suitability for RCS measurements, and the resin with the higher density was shown to be appropriate for the RCS test model. Based on this preliminary study, 1/20- and 1/40-scale aircraft models were manufactured using aluminum or polyurethane resin, and their RCS values were measured to demonstrate that almost equivalent RCS patterns could be obtained. Therefore, low-cost RCS testing was achieved using the resin-made scaled model.
- 3 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Low-Cost Radar Cross Section Measurement With a Resin-Made Model Coated With Conductive Paste
This study aims to provide practical information regarding the development of a cost-effective test model for low-cost radar cross-section (RCS) measurements. Two major possible approaches for reducing the manufacturing cost of a model are replacing the molding material with an inexpensive one and measuring a scaled-down model with a higher operating frequency. In this study, the former was achieved using a resin-made model coated with a conductive paste to imitate a complete metallic model. According to the scaling laws, the entire geometry, including the surface roughness of the model because of the conductive paint, must be appropriately scaled down. Because this roughness scaling is practically infeasible, we experimentally prove that, if an appropriate molding material is selected, shape-only scaling is valid without roughness scaling. As a preliminary study, two types of polyurethane resins with different densities were tested for their suitability for RCS measurements, and the resin with the higher density was shown to be appropriate for the RCS test model. Based on this preliminary study, 1/20- and 1/40-scale aircraft models were manufactured using aluminum or polyurethane resin, and their RCS values were measured to demonstrate that almost equivalent RCS patterns could be obtained. Therefore, low-cost RCS testing was achieved using the resin-made scaled model.
- Open Access
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Image-Based Radar Cross-Section Synthesis for a Cluster of Multiple Static Targets
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. In this article, we propose a novel image-based method for radar cross-section (RCS) prediction of a cluster of multiple static targets by synthesizing replicas of an original radar image. In this approach, we first measure the near-field backscattering of a target and reconstruct a corresponding radar image. Then, modified copies of this image with rotation, translation, and spatial filtering, are generated according to the predefined desired arrangement, and they are coherently summed to create a single synthesized image in which all scattering contributions contained in the modified images are virtually included. Finally, the synthesized image is utilized to predict the far-field RCS of the multiple targets, based on the theory of image-based near-field-to-far-field transformation (NFFFT). By employing the proposed algorithm, we can avoid building multiple test targets, resulting in the reduction of the production costs of them. Moreover, we can easily test several different experimental layouts of the multiple targets without repeating a real measurement. Numerical simulations and experiments are provided to demonstrate the validity of the proposed image-based RCS synthesis.
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessImage-Based Radar Cross-Section Synthesis for a Cluster of Multiple Static Targets
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. In this article, we propose a novel image-based method for radar cross-section (RCS) prediction of a cluster of multiple static targets by synthesizing replicas of an original radar image. In this approach, we first measure the near-field backscattering of a target and reconstruct a corresponding radar image. Then, modified copies of this image with rotation, translation, and spatial filtering, are generated according to the predefined desired arrangement, and they are coherently summed to create a single synthesized image in which all scattering contributions contained in the modified images are virtually included. Finally, the synthesized image is utilized to predict the far-field RCS of the multiple targets, based on the theory of image-based near-field-to-far-field transformation (NFFFT). By employing the proposed algorithm, we can avoid building multiple test targets, resulting in the reduction of the production costs of them. Moreover, we can easily test several different experimental layouts of the multiple targets without repeating a real measurement. Numerical simulations and experiments are provided to demonstrate the validity of the proposed image-based RCS synthesis.
- Open Access
- 20 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Low-Cost Radar Cross-Section Measurement With a Resin-Made Model Coated With Conductive Paste
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. This article is intended to provide practical information about development of a cost-effective test model to achieve low-cost radar cross-section (RCS) measurement. To reduce the manufacturing cost of a model, two major possible approaches are: replacing the molding material with inexpensive one, and measuring a scaled-down model with a higher operating frequency. In this study, the former was achieved by using a resin-made model coated with conductive paste to imitate a complete metallic model. According to the scaling laws, the entire geometry, including the surface roughness of the model owing to the conductive paint, must be properly scaled down. As this roughness scaling is practically infeasible, we experimentally prove that the shape-only scaling is valid without the roughness scaling, provided that appropriate molding material is selected. As a preliminary study, two types of polyurethane resin with different density were tested for their suitability of the RCS measurement, and the resin with higher density was shown to be appropriate for the RCS test model. Based on this preliminary study, 1/20- and 1/40-scale aircraft models made with aluminum or polyurethane resin were manufactured, and their RCS were measured to demonstrate that the almost equivalent RCS patterns can be obtained; therefore, low-cost RCS testing was achieved by the resin-made scaled model.
- 20 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessLow-Cost Radar Cross-Section Measurement With a Resin-Made Model Coated With Conductive Paste
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. This article is intended to provide practical information about development of a cost-effective test model to achieve low-cost radar cross-section (RCS) measurement. To reduce the manufacturing cost of a model, two major possible approaches are: replacing the molding material with inexpensive one, and measuring a scaled-down model with a higher operating frequency. In this study, the former was achieved by using a resin-made model coated with conductive paste to imitate a complete metallic model. According to the scaling laws, the entire geometry, including the surface roughness of the model owing to the conductive paint, must be properly scaled down. As this roughness scaling is practically infeasible, we experimentally prove that the shape-only scaling is valid without the roughness scaling, provided that appropriate molding material is selected. As a preliminary study, two types of polyurethane resin with different density were tested for their suitability of the RCS measurement, and the resin with higher density was shown to be appropriate for the RCS test model. Based on this preliminary study, 1/20- and 1/40-scale aircraft models made with aluminum or polyurethane resin were manufactured, and their RCS were measured to demonstrate that the almost equivalent RCS patterns can be obtained; therefore, low-cost RCS testing was achieved by the resin-made scaled model.
- Open Access
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Far-Field Radar Cross-Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna Scanning Surfaces
This article has been accepted for publication in IEEE Transactions on Antennas and Propagation. Citation information: T. Watanabe and H. Yamada, “Far-Field Radar Cross-Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna-Scanning Surfaces,” IEEE Transactions on Antennas and Propagation, doi: 10.1109/TAP.2022.3161491. © 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. In this study, we propose a generalized algorithm for far-field radar cross-section determination by using 3-D synthetic aperture imaging with arbitrary antenna-scanning surfaces. This method belongs to a class of techniques called image-based near-field-to-far-field transformation. The previous image-based approaches have been formulated based on a specific antenna-scanning trajectory or surface, such as a line, plane, circle, cylinder, and sphere; majority of these approaches consider 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna-scanning surface and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We validate the proposed algorithm by performing numerical simulations and anechoic chamber measurements.
- 4 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessFar-Field Radar Cross-Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna Scanning Surfaces
This article has been accepted for publication in IEEE Transactions on Antennas and Propagation. Citation information: T. Watanabe and H. Yamada, “Far-Field Radar Cross-Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna-Scanning Surfaces,” IEEE Transactions on Antennas and Propagation, doi: 10.1109/TAP.2022.3161491. © 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. In this study, we propose a generalized algorithm for far-field radar cross-section determination by using 3-D synthetic aperture imaging with arbitrary antenna-scanning surfaces. This method belongs to a class of techniques called image-based near-field-to-far-field transformation. The previous image-based approaches have been formulated based on a specific antenna-scanning trajectory or surface, such as a line, plane, circle, cylinder, and sphere; majority of these approaches consider 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna-scanning surface and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We validate the proposed algorithm by performing numerical simulations and anechoic chamber measurements.
- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (7) , 5831-5840
Far-Field Radar Cross Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna-Scanning Surfaces
In this study, we propose a generalized algorithm for far-field radar cross-section determination by using 3-D synthetic aperture imaging with arbitrary antenna-scanning surfaces. This method belongs to a class of techniques called image-based near-field-to-far-field transformation. The previous image-based approaches have been formulated based on a specific antenna-scanning trajectory or surface, such as a line, plane, circle, cylinder, and sphere; majority of these approaches consider 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna-scanning surface and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We validate the proposed algorithm by performing numerical simulations and anechoic chamber measurements.
- 28 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (7) , 5831-5840
Far-Field Radar Cross Section Determination From Near-Field 3-D Synthetic Aperture Imaging With Arbitrary Antenna-Scanning Surfaces
In this study, we propose a generalized algorithm for far-field radar cross-section determination by using 3-D synthetic aperture imaging with arbitrary antenna-scanning surfaces. This method belongs to a class of techniques called image-based near-field-to-far-field transformation. The previous image-based approaches have been formulated based on a specific antenna-scanning trajectory or surface, such as a line, plane, circle, cylinder, and sphere; majority of these approaches consider 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna-scanning surface and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We validate the proposed algorithm by performing numerical simulations and anechoic chamber measurements.
- Open Access
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Unified Approach For Multiscale Radar Cross-Section Measurement by Synthetic Aperture Imaging
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.In this study, we present an improved and unified approach for image-based radar cross-section (RCS) measurement by 2-D synthetic aperture radar (SAR) imaging with an arbitrary curved antenna scanning trajectory. Because RCS is a quantity defined in the far-field distance of an object under test, direct RCS measurement of an electrically large target is often infeasible owing to the spatial limitation of the measurement facility. The method proposed in this study belongs to the class of techniques referred to as the image-based near-field to far-field transformation (NFFFT) to convert the near-field data of scattering experiment into the far-field RCS. In a previous study, we have developed an NFFFT based on 3-D SAR imaging with an arbitrary antenna scanning surface. However, the previous approach is only applicable to the surface scanning which is impossible for a certain case such as measurement using airborne SAR or vehicle-borne SAR. Therefore, one requires an alternative method that can accommodate an arbitrary scanning curve, which is the subject of this study. We derive a generalized correction factor for image-based NFFFT which is designed to ensure the integral transformation in the image reconstruction process be self-consistent for electrically small scatterers. We provide a series of numerical simulations, an indoor experiment, and an airborne SAR experiment to validate that the proposed scheme can be utilized for various situations ranging from near-field to far-field distance.
- 29 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessUnified Approach For Multiscale Radar Cross-Section Measurement by Synthetic Aperture Imaging
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.In this study, we present an improved and unified approach for image-based radar cross-section (RCS) measurement by 2-D synthetic aperture radar (SAR) imaging with an arbitrary curved antenna scanning trajectory. Because RCS is a quantity defined in the far-field distance of an object under test, direct RCS measurement of an electrically large target is often infeasible owing to the spatial limitation of the measurement facility. The method proposed in this study belongs to the class of techniques referred to as the image-based near-field to far-field transformation (NFFFT) to convert the near-field data of scattering experiment into the far-field RCS. In a previous study, we have developed an NFFFT based on 3-D SAR imaging with an arbitrary antenna scanning surface. However, the previous approach is only applicable to the surface scanning which is impossible for a certain case such as measurement using airborne SAR or vehicle-borne SAR. Therefore, one requires an alternative method that can accommodate an arbitrary scanning curve, which is the subject of this study. We derive a generalized correction factor for image-based NFFFT which is designed to ensure the integral transformation in the image reconstruction process be self-consistent for electrically small scatterers. We provide a series of numerical simulations, an indoor experiment, and an airborne SAR experiment to validate that the proposed scheme can be utilized for various situations ranging from near-field to far-field distance.
- Open Access
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Spherical Scanning 3-D Microwave Imaging of Near-field Scatterers Mutually Coupled With an Antenna Array
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.In this article, we propose a 3-D synthetic aperture imaging method with spherical antenna scanning to identify scatterers located close to an antenna array, such as fixtures or support of the antenna. Previous studies have shown that 2-D and 3-D synthetic aperture imaging techniques with planar, circular, and cylindrical scanning can successfully reconstruct spatial images of near-field scatterers. The spherical scanning approach considered in this article is expected to improve the 3-D image resolution because more angular diversity can be achieved in the elevation direction. However, as we show in this study, simple extension of the previous techniques to the spherical case results in undesired blur artifacts in the reconstructed image. To overcome this problem, we introduce a correction factor in the image reconstruction. The proposed imaging algorithm is validated by numerical electromagnetic simulation based on the method of moments.
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessSpherical Scanning 3-D Microwave Imaging of Near-field Scatterers Mutually Coupled With an Antenna Array
*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.In this article, we propose a 3-D synthetic aperture imaging method with spherical antenna scanning to identify scatterers located close to an antenna array, such as fixtures or support of the antenna. Previous studies have shown that 2-D and 3-D synthetic aperture imaging techniques with planar, circular, and cylindrical scanning can successfully reconstruct spatial images of near-field scatterers. The spherical scanning approach considered in this article is expected to improve the 3-D image resolution because more angular diversity can be achieved in the elevation direction. However, as we show in this study, simple extension of the previous techniques to the spherical case results in undesired blur artifacts in the reconstructed image. To overcome this problem, we introduce a correction factor in the image reconstruction. The proposed imaging algorithm is validated by numerical electromagnetic simulation based on the method of moments.
- 1 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Communications Express
- Vol. 10 (11) , 870-874
Microwave 3D imaging of near-field scatterers mutually coupled with an antenna array
In this study, we propose a three-dimensional (3D) imaging method for near-field scatterers that are mutually coupled with an antenna array, such as the support structure or fixtures of the antenna, based on bistatic microwave synthetic aperture imaging. This method can be used to evaluate the effectiveness of the antenna design with irremovable near-field scatterers. Numerical simulation and measurement results show the validity of the proposed imaging scheme.
- 1 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Communications Express
- Vol. 10 (11) , 870-874
Microwave 3D imaging of near-field scatterers mutually coupled with an antenna array
In this study, we propose a three-dimensional (3D) imaging method for near-field scatterers that are mutually coupled with an antenna array, such as the support structure or fixtures of the antenna, based on bistatic microwave synthetic aperture imaging. This method can be used to evaluate the effectiveness of the antenna design with irremovable near-field scatterers. Numerical simulation and measurement results show the validity of the proposed imaging scheme.
- 22 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-14
Orientation Estimation of Surface Cracks in Metals Based on Intensity Maximization of Polarimetric Circular Synthetic Aperture Radar Images
In this article, we propose a novel method of estimation of crack orientation on a metallic surface using linearly polarized circular synthetic aperture radar (SAR) imaging. We modeled a crack using a thin linear scatterer and considered the rotation of polarization basis vectors that were designed to match a predefined orientation vector corresponding to a temporary estimate of the orientation of the linear scatterer. The radar image intensity was expected to be a maximum when the specified orientation vector exactly matched the true scatterer orientation angle; therefore, to estimate the orientation of the scatterer, we aimed to obtain the maximum intensity of the image by varying the orientation vector. We validated the proposed scheme of estimation via a numerical electromagnetic simulation using the method of moments (MoM) and laboratory measurements carried out in an anechoic chamber. In this experiment, a metallic plate with slits was used as a simple surface crack model and the root mean square error and maximum error of the angular estimation were 1.9-degree and 5.1-degree, respectively.
- 22 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-14
Orientation Estimation of Surface Cracks in Metals Based on Intensity Maximization of Polarimetric Circular Synthetic Aperture Radar Images
In this article, we propose a novel method of estimation of crack orientation on a metallic surface using linearly polarized circular synthetic aperture radar (SAR) imaging. We modeled a crack using a thin linear scatterer and considered the rotation of polarization basis vectors that were designed to match a predefined orientation vector corresponding to a temporary estimate of the orientation of the linear scatterer. The radar image intensity was expected to be a maximum when the specified orientation vector exactly matched the true scatterer orientation angle; therefore, to estimate the orientation of the scatterer, we aimed to obtain the maximum intensity of the image by varying the orientation vector. We validated the proposed scheme of estimation via a numerical electromagnetic simulation using the method of moments (MoM) and laboratory measurements carried out in an anechoic chamber. In this experiment, a metallic plate with slits was used as a simple surface crack model and the root mean square error and maximum error of the angular estimation were 1.9-degree and 5.1-degree, respectively.