Jing Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jing Hu has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Xuedong Zhang
Department of Geotechnical Engineering China Institute of Water Resources and Hydropower Research Beijing China
7 shared publicationsZitao Zhang
Department of Geotechnical Engineering China Institute of Water Resources and Hydropower Research Beijing China
4 shared publications- Zitao Zhang
State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin, China Institute of Water Resources and Hydropower Research Beijing China
4 shared publications Ge Song
1 College of Field Engineering, PLA Army Engineering University, Nanjing, China
2 shared publicationsJianHui Liang
China Institute of Water Resources and Hydropower Research
2 shared publicationsJianhui Liang
Senior Engineer, Dept. of Geotechnical Engineering, China Institute of Water Resources and Hydropower Research, Beijing 100048, China
2 shared publications
Latest Publications
- 25 November 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (2) , 1091-1110
Dynamic strength criterion of concrete utilizing dynamic coordinates
The effects of strain rate on the strength of concrete should be considered when analyzing the dynamic responses of concrete structures subjected to earthquakes or explosions. This paper shows that the effect of strain rate on strength characteristics can be attributed to an increase in cohesion. Notably, the effects of friction, hydrostatic pressure, and intermediate principal stress tend to remain rate‐independent under the appropriate reference system. Consequently, a dynamic coordinate system is established to account for the effects of strain rate on isotropic tensile strength. In this dynamic coordinate system, the strength envelopes for concrete closely resemble those in quasi‐static conditions under varying strain rates, as defined in the unified strength criterion. Using this proposed dynamic strength criterion, this paper explores the dynamic characteristics of different stress paths, including uniaxial, biaxial, and triaxial compression and tension. The predictions, both in terms of tendencies and magnitudes, are consistent with test results. The proposed method enables the extension of most strength criteria to dynamic scenarios by introducing two additional parameters with clear physical interpretations. This advancement enhances the current understanding of dynamic strength characteristics and provides a theoretical foundation for dynamic response analysis.
- 25 November 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (2) , 1091-1110
Dynamic strength criterion of concrete utilizing dynamic coordinates
The effects of strain rate on the strength of concrete should be considered when analyzing the dynamic responses of concrete structures subjected to earthquakes or explosions. This paper shows that the effect of strain rate on strength characteristics can be attributed to an increase in cohesion. Notably, the effects of friction, hydrostatic pressure, and intermediate principal stress tend to remain rate‐independent under the appropriate reference system. Consequently, a dynamic coordinate system is established to account for the effects of strain rate on isotropic tensile strength. In this dynamic coordinate system, the strength envelopes for concrete closely resemble those in quasi‐static conditions under varying strain rates, as defined in the unified strength criterion. Using this proposed dynamic strength criterion, this paper explores the dynamic characteristics of different stress paths, including uniaxial, biaxial, and triaxial compression and tension. The predictions, both in terms of tendencies and magnitudes, are consistent with test results. The proposed method enables the extension of most strength criteria to dynamic scenarios by introducing two additional parameters with clear physical interpretations. This advancement enhances the current understanding of dynamic strength characteristics and provides a theoretical foundation for dynamic response analysis.
- 20 September 2022
- Published by Springer Nature
- p. 2245-2252
Examining the Seismic Behavior of Rock-Fill Dams Using DEM Simulations
- 20 September 2022
- Published by Springer Nature
- p. 2245-2252
Examining the Seismic Behavior of Rock-Fill Dams Using DEM Simulations
- Open Access
- 9 June 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-16
Experimental Characterization of the Seismic Responses of Silt-Interlayered Stratified Sandy Tailings Slopes Using Centrifuge Shaking Table Tests
This study aims to characterize the seismic responses of silt-interlayered stratified sandy tailings slopes. In order to achieve this, a series of model tests were carried out in an advanced centrifuge shaking table. The experimental results demonstrate that sandy tailings slopes interlayered with silts are more prone to flow failure compared with homogeneous slopes. The failure process of a steep silt-interlayered sandy slope is further elaborated in detail, and two modes of tailings release have been identified. The initial loading cycles may only lead to localized deformation near the relatively shallow silty layer; however, there is continuous build-up of excess pore water pressure in deeper sandy tailings. With increasing the number of loading cycles, more sandy tailings start to spread laterally, and ejection of tailings may occur. After ejection, the excess pore pressure turns to dissipate, while the tailings near slope crest become liquefied and then flow toward the downstream direction layer by layer, leading to tailings release. This is the first mode of tailings release. Due to the continuous lateral spreading, the displaced tailings eventually arrive at the crest of the starter dam and then flow along its slope at the downstream side, leading to tailings release. This is the second mode of tailings release. Those unique and invaluable observations can be used to improve the seismic design of tailings impoundments and to validate associated numerical methods.
- 9 June 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-16
Open AccessExperimental Characterization of the Seismic Responses of Silt-Interlayered Stratified Sandy Tailings Slopes Using Centrifuge Shaking Table Tests
This study aims to characterize the seismic responses of silt-interlayered stratified sandy tailings slopes. In order to achieve this, a series of model tests were carried out in an advanced centrifuge shaking table. The experimental results demonstrate that sandy tailings slopes interlayered with silts are more prone to flow failure compared with homogeneous slopes. The failure process of a steep silt-interlayered sandy slope is further elaborated in detail, and two modes of tailings release have been identified. The initial loading cycles may only lead to localized deformation near the relatively shallow silty layer; however, there is continuous build-up of excess pore water pressure in deeper sandy tailings. With increasing the number of loading cycles, more sandy tailings start to spread laterally, and ejection of tailings may occur. After ejection, the excess pore pressure turns to dissipate, while the tailings near slope crest become liquefied and then flow toward the downstream direction layer by layer, leading to tailings release. This is the first mode of tailings release. Due to the continuous lateral spreading, the displaced tailings eventually arrive at the crest of the starter dam and then flow along its slope at the downstream side, leading to tailings release. This is the second mode of tailings release. Those unique and invaluable observations can be used to improve the seismic design of tailings impoundments and to validate associated numerical methods.
- 1 February 2022
- Published by IOP Publishing in Chinese Physics B
- Vol. 31 (3) , 034302
Nonlinear oscillation characteristics of magnetic microbubbles under acoustic and magnetic fields
Microbubbles loaded with magnetic nanoparticles (MMBs) have attracted increasing interests in multimode imaging and drug/gene delivery and targeted therapy. However, the dynamic behaviors generated in diagnostic and therapeutic applications are not clear. In the present work, a novel theoretical model of a single MMB was developed, and the dynamic responses in an infinite viscous fluid were investigated under simultaneous exposure to magnetic and acoustic fields. The results showed that the amplitude reduces and the resonant frequency increases with the strength of the applied steady magnetic field and the susceptibility of the magnetic shell. However, the magnetic field has a limited influence on the oscillating. It is also noticed that the responses of MMB to a time-varying magnetic field is different from a steady magnetic field. The subharmonic components increase firstly and then decrease with the frequency of the magnetic field and the enhanced effect is related to the acoustic driving frequency. It is indicated that there may be a coupling interaction effect between the acoustic and magnetic fields.
- 1 February 2022
- Published by IOP Publishing in Chinese Physics B
- Vol. 31 (3) , 034302
Nonlinear oscillation characteristics of magnetic microbubbles under acoustic and magnetic fields
Microbubbles loaded with magnetic nanoparticles (MMBs) have attracted increasing interests in multimode imaging and drug/gene delivery and targeted therapy. However, the dynamic behaviors generated in diagnostic and therapeutic applications are not clear. In the present work, a novel theoretical model of a single MMB was developed, and the dynamic responses in an infinite viscous fluid were investigated under simultaneous exposure to magnetic and acoustic fields. The results showed that the amplitude reduces and the resonant frequency increases with the strength of the applied steady magnetic field and the susceptibility of the magnetic shell. However, the magnetic field has a limited influence on the oscillating. It is also noticed that the responses of MMB to a time-varying magnetic field is different from a steady magnetic field. The subharmonic components increase firstly and then decrease with the frequency of the magnetic field and the enhanced effect is related to the acoustic driving frequency. It is indicated that there may be a coupling interaction effect between the acoustic and magnetic fields.
- 1 December 2021
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 151
Centrifuge shaking table tests on offshore wind turbine bucket foundation in mildly inclined liquefiable seabed
- 1 December 2021
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 151
Centrifuge shaking table tests on offshore wind turbine bucket foundation in mildly inclined liquefiable seabed
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (4) , 04021023
Physical Modeling on Dynamic Responses of Gravity Dams by Underwater Explosion in a Centrifuge
Gravity dams are important infrastructures, and their failure can affect public security. In this work, physical modeling was conducted to determine the dynamic responses and types of damage to gravity dams subjected to underwater explosions. Five tests under different impoundment levels, centrifugal accelerations, standoff distances, detonation depth, and equivalent weights were performed in a centrifuge. The mechanism of dynamic responses of the dam was analyzed. The peak strain and displacement by the shock wave and bubble pulse were both reached when the impulses of the dynamic loads were maximum. Different failure modes and degrees of damage were observed in the tests. When the explosive detonated in shallow water, a more substantial structural bending moment was generated by the shock wave to cause structural failure by bending. When the impoundment level was reduced, the dynamic responses were reduced due to the decrease in shock energy or impulse on the structure. However, new deformation or failure mode can be induced when the impoundment level is lower. Better understanding of the dynamic mechanism and proper control of the impoundment level would be helpful for dam protection.
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (4) , 04021023
Physical Modeling on Dynamic Responses of Gravity Dams by Underwater Explosion in a Centrifuge
Gravity dams are important infrastructures, and their failure can affect public security. In this work, physical modeling was conducted to determine the dynamic responses and types of damage to gravity dams subjected to underwater explosions. Five tests under different impoundment levels, centrifugal accelerations, standoff distances, detonation depth, and equivalent weights were performed in a centrifuge. The mechanism of dynamic responses of the dam was analyzed. The peak strain and displacement by the shock wave and bubble pulse were both reached when the impulses of the dynamic loads were maximum. Different failure modes and degrees of damage were observed in the tests. When the explosive detonated in shallow water, a more substantial structural bending moment was generated by the shock wave to cause structural failure by bending. When the impoundment level was reduced, the dynamic responses were reduced due to the decrease in shock energy or impulse on the structure. However, new deformation or failure mode can be induced when the impoundment level is lower. Better understanding of the dynamic mechanism and proper control of the impoundment level would be helpful for dam protection.
- 1 December 2020
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 21 (12) , 976-991
Bending failure of a concrete gravity dam subjected to underwater explosion
Dam structures are prime targets during wars, and a tragedy is likely to happen in a populated area downstream of a dam exposed to explosions. However, exp
- 1 December 2020
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 21 (12) , 976-991
Bending failure of a concrete gravity dam subjected to underwater explosion
Dam structures are prime targets during wars, and a tragedy is likely to happen in a populated area downstream of a dam exposed to explosions. However, exp
- 1 October 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 146 (10) , 04020220
Investigation of a New Shock Factor to Assess an Air-Backed Structure Subjected to a Spherical Wave Caused by an Underwater Explosion
As a complex process, an underwater explosion is affected by different factors. Shock factors are variables used to characterize the severity of a shock based on scaling laws, which are conventionally used to designate the effect of an underwater explosion on a target. To reveal the mechanism involved in the dynamic response of an air-backed plate induced by underwater explosion, this study established a new shock factor to explain the dynamic mechanism of an underwater explosion. The shock factor was defined as the total energy impacting a structure that is subjected to a spherical wave. To validate the effectiveness of the shock factor, both numerical and centrifugal modeling were adopted. The numerical results indicate that changes in the standoff distances, defined as the distance between explosives and the upstream surface of a structure, and the eccentric distances, defined as the distance between explosives and the centroid of the structure wet surface, have almost no influence on the strain energy, kinetic energy, or total energy of the air-backed plate, at constant shock factor. Then the centrifugal test results were used to assess the dynamic responses under different explosive weights, standoff distances, and water depths. The results show that both near- and far-field underwater explosions were effectively assessed using shock factors. The shock factor with clear physical significance unifies the effects of explosive weight, explosive position, and structure dimension. The shock environment could be simply evaluated by the shock factor when subjected to an underwater explosion, which could also be useful in designing model tests based on scaling laws.
- 1 October 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 146 (10) , 04020220
Investigation of a New Shock Factor to Assess an Air-Backed Structure Subjected to a Spherical Wave Caused by an Underwater Explosion
As a complex process, an underwater explosion is affected by different factors. Shock factors are variables used to characterize the severity of a shock based on scaling laws, which are conventionally used to designate the effect of an underwater explosion on a target. To reveal the mechanism involved in the dynamic response of an air-backed plate induced by underwater explosion, this study established a new shock factor to explain the dynamic mechanism of an underwater explosion. The shock factor was defined as the total energy impacting a structure that is subjected to a spherical wave. To validate the effectiveness of the shock factor, both numerical and centrifugal modeling were adopted. The numerical results indicate that changes in the standoff distances, defined as the distance between explosives and the upstream surface of a structure, and the eccentric distances, defined as the distance between explosives and the centroid of the structure wet surface, have almost no influence on the strain energy, kinetic energy, or total energy of the air-backed plate, at constant shock factor. Then the centrifugal test results were used to assess the dynamic responses under different explosive weights, standoff distances, and water depths. The results show that both near- and far-field underwater explosions were effectively assessed using shock factors. The shock factor with clear physical significance unifies the effects of explosive weight, explosive position, and structure dimension. The shock environment could be simply evaluated by the shock factor when subjected to an underwater explosion, which could also be useful in designing model tests based on scaling laws.
- 1 May 2020
- Published by Elsevier in International Journal of Impact Engineering
- Vol. 139
The influence of free water content on ballistic performances of concrete targets
- 1 May 2020
- Published by Elsevier in International Journal of Impact Engineering
- Vol. 139
The influence of free water content on ballistic performances of concrete targets
- 24 January 2020
- Published by ASME International in Journal of Fluids Engineering
- Vol. 142 (4)
Modeling Bubble Motions by Underwater Explosion in a Centrifuge
Bubble oscillations generated by underwater explosions (UNDEX) can cause considerable damage to nearby marine vehicles or hydraulic structures as the energy inside the bubble is comparable to that of a shock wave. Since both compressibility and gravity affect the bubble impulse, it is not easy to reproduce the pulse pressure by experiments in vacuum tanks or pressurized tanks. This study presents the promising prospect of using a centrifuge to model bubble motion. Primarily, the influence of gravitational acceleration on bubble oscillation and migration is studied. Hypergravity is not only a necessary condition to satisfy the similarity of the Mach and Froude numbers but can also reduce the boundary effects and corresponding errors when modeling a bubble in a confined container. The scaling laws derived from the physical processes of bubble dynamics and the similarities in bubble shapes and migration are validated. Moreover, the main sources of possible errors for an UNDEX in a centrifuge are discussed to show the reliability of the results followed by suggestions for reducing the error in the physical modeling of an UNDEX event.
- 24 January 2020
- Published by ASME International in Journal of Fluids Engineering
- Vol. 142 (4)
Modeling Bubble Motions by Underwater Explosion in a Centrifuge
Bubble oscillations generated by underwater explosions (UNDEX) can cause considerable damage to nearby marine vehicles or hydraulic structures as the energy inside the bubble is comparable to that of a shock wave. Since both compressibility and gravity affect the bubble impulse, it is not easy to reproduce the pulse pressure by experiments in vacuum tanks or pressurized tanks. This study presents the promising prospect of using a centrifuge to model bubble motion. Primarily, the influence of gravitational acceleration on bubble oscillation and migration is studied. Hypergravity is not only a necessary condition to satisfy the similarity of the Mach and Froude numbers but can also reduce the boundary effects and corresponding errors when modeling a bubble in a confined container. The scaling laws derived from the physical processes of bubble dynamics and the similarities in bubble shapes and migration are validated. Moreover, the main sources of possible errors for an UNDEX in a centrifuge are discussed to show the reliability of the results followed by suggestions for reducing the error in the physical modeling of an UNDEX event.