Konstantin Victorovich Muzalevskiy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Konstantin Victorovich Muzalevskiy has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Zdenek Ruzicka
Laboratory of Radiophysics of Remote Sensing, Kirensky Institute of Physics Federal Research Center KSC Siberian Branch Russian Academy of Sciences, Siberian Federal University, Krasnoyarsk, Russia
22 shared publications Alexander Vasiliev
Laboratory for Cartographic Modeling and Forecasting the State of Permafrost Geosystems, Earth Cryosphere Institute, Tyumen Scientific Centre, Siberian Branch of the Russian Academy of Sciences, Tyumen, Russia
11 shared publicationsAlexandre Roy
Département des Sciences de l’Environnement, Université du Québec à Trois-Rivières (UQTR), Trois-Rivières, Centre d’étude Nordique, Québec, Canada
10 shared publications- Igor V. Savin
Kirensky Institute of Physics SB RAS
10 shared publications - Michael M. Loranty
Department of Geography Colgate University Hamilton NY USA
10 shared publications V.L. Mironov
Kirensky Institute of Physics SB RAS
10 shared publications
Latest Publications
- 1 July 2026
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2026 (7)
Direct problem of subsurface radar location of pipe leaks in seasonally frozen arctic soils by the modified method of auxiliary sources
This article investigates the capabilities of the modified method of auxiliary sources (MAS) for solving the direct problem of subsurface radar sounding of layered inhomogeneous media of Arctic soils, including cylindrical doubly-connected dielectrically inhomogeneous regions. In this modification of MAS, the fields of auxiliary sources (AS) are represented as a superposition of zero-order Bessel functions, zero-order Hankel functions of the first kind, and their derivatives with respect to the normal direction to the level line, which made it possible to solve the boundary value problem with open interfaces of a plane-layered inhomogeneous medium. The time-domain waveforms calculated by MAS were verified using the finite-difference method (coefficient of determination 0.998, root-mean-square deviation less than 6 V/m). It is shown that the modified MAS provides a reliable solution to the direct problem of subsurface radar sounding over a wide range of soil properties, including seasonally frozen soils, and can be used in algorithms for processing ground-penetrating radar data for monitoring pipelines and road structures in permafrost regions.
- 1 July 2026
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2026 (7)
Direct problem of subsurface radar location of pipe leaks in seasonally frozen arctic soils by the modified method of auxiliary sources
This article investigates the capabilities of the modified method of auxiliary sources (MAS) for solving the direct problem of subsurface radar sounding of layered inhomogeneous media of Arctic soils, including cylindrical doubly-connected dielectrically inhomogeneous regions. In this modification of MAS, the fields of auxiliary sources (AS) are represented as a superposition of zero-order Bessel functions, zero-order Hankel functions of the first kind, and their derivatives with respect to the normal direction to the level line, which made it possible to solve the boundary value problem with open interfaces of a plane-layered inhomogeneous medium. The time-domain waveforms calculated by MAS were verified using the finite-difference method (coefficient of determination 0.998, root-mean-square deviation less than 6 V/m). It is shown that the modified MAS provides a reliable solution to the direct problem of subsurface radar sounding over a wide range of soil properties, including seasonally frozen soils, and can be used in algorithms for processing ground-penetrating radar data for monitoring pipelines and road structures in permafrost regions.
- 1 August 2025
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2025 (8)
Application of the auxiliary sources method in the inverse problem of localization of a cylindrical impedance scatterer
In this article, based on the Method of Auxiliary Sources (MAS), an algorithm is proposed for localizing cylindrical scatterers filled with a medium characterized by a complex permittivity varying across a wide range of values. The cylinder was coaxially excited by a monochromatic electric current filament. The direct problem was solved using MAS with impedance boundary conditions applied to the surface of the cylinders. The method for solving the inverse problem is based on determining the amplitudes of auxiliary sources (AS), whose fields are expressed as the Green's function of the problem (specifically, Hankel and Bessel functions of zero order). The complex amplitudes of AS were determined from the boundary conditions matching the tangential components of the electromagnetic field in the air region along the spatial observation curve of the field scattered by the cylinder. The final amplitudes of AS were employed for numerically extending the wave fields from the observed scattered-field curve into the surrounding space. It is demonstrated that the proposed method enables reliable localization of cylindrical objects with variable surface impedance covering a broad range of values. Importantly, the distance between the field observation point and the localized cylinders must remain within 3–5 wavelengths.
- 1 August 2025
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2025 (8)
Application of the auxiliary sources method in the inverse problem of localization of a cylindrical impedance scatterer
In this article, based on the Method of Auxiliary Sources (MAS), an algorithm is proposed for localizing cylindrical scatterers filled with a medium characterized by a complex permittivity varying across a wide range of values. The cylinder was coaxially excited by a monochromatic electric current filament. The direct problem was solved using MAS with impedance boundary conditions applied to the surface of the cylinders. The method for solving the inverse problem is based on determining the amplitudes of auxiliary sources (AS), whose fields are expressed as the Green's function of the problem (specifically, Hankel and Bessel functions of zero order). The complex amplitudes of AS were determined from the boundary conditions matching the tangential components of the electromagnetic field in the air region along the spatial observation curve of the field scattered by the cylinder. The final amplitudes of AS were employed for numerically extending the wave fields from the observed scattered-field curve into the surrounding space. It is demonstrated that the proposed method enables reliable localization of cylindrical objects with variable surface impedance covering a broad range of values. Importantly, the distance between the field observation point and the localized cylinders must remain within 3–5 wavelengths.
- 1 May 2025
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2025 (5)
Measurement of agrosoils moisture under barley, wheat and oats crops by electromagnetic impulses from an unmanned aerial vehicle
During long-term experiments, the feasibility of remote sensing the moisture content of agrosoils under barley, oats, and wheat using electromagnetic pulses from an unmanned aerial vehicle (UAV), both during natural moistening and drying of crops, was demonstrated. The test fields were situated within the territory of the Minino Experimental Farm (located near Minino village, Krasnoyarsk Krai). Sensing impulses were synthesized based on spectral measurements (using a Caban R60 vector network analyzer) of the reflection coefficient at the input terminals of the log-periodic transmitting and receiving antenna. Soil moisture was determined by solving the inverse problem of minimizing the norm of the discrepancy between the modules of the reflection coefficient, calculated using the Fresnel formula (for a dielectrically homogeneous half-space) and the average values of those measured in the MHz frequency range at various hovering heights of the UAV above the test fields. The advantages and disadvantages of the proposed method, as well as the prospects for the development of technology for remote sensing of soil moisture using multi-rotor UAVs are discussed.
- 1 May 2025
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2025 (5)
Measurement of agrosoils moisture under barley, wheat and oats crops by electromagnetic impulses from an unmanned aerial vehicle
During long-term experiments, the feasibility of remote sensing the moisture content of agrosoils under barley, oats, and wheat using electromagnetic pulses from an unmanned aerial vehicle (UAV), both during natural moistening and drying of crops, was demonstrated. The test fields were situated within the territory of the Minino Experimental Farm (located near Minino village, Krasnoyarsk Krai). Sensing impulses were synthesized based on spectral measurements (using a Caban R60 vector network analyzer) of the reflection coefficient at the input terminals of the log-periodic transmitting and receiving antenna. Soil moisture was determined by solving the inverse problem of minimizing the norm of the discrepancy between the modules of the reflection coefficient, calculated using the Fresnel formula (for a dielectrically homogeneous half-space) and the average values of those measured in the MHz frequency range at various hovering heights of the UAV above the test fields. The advantages and disadvantages of the proposed method, as well as the prospects for the development of technology for remote sensing of soil moisture using multi-rotor UAVs are discussed.
- Open Access
- 4 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (21) , 9606
Mapping Soil Surface Moisture of an Agrophytocenosis via a Neural Network Based on Synchronized Radar and Multispectral Optoelectronic Data of SENTINEL-1,2—Case Study on Test Sites in the Lower Volga Region
In this article, the authors developed a novel method for the moisture mapping of the soil surface of agrophytocenosis using a neural network based on synchronized radar and multispectral optoelectronic data from Sentinel-1,2. The significance of this research lies in its potential to enhance precision farming practices, which are increasingly vital in addressing global agricultural challenges such as water scarcity and the need for sustainable resource management. To verify the developed method, data from two experimental plots were utilized. These plots were located on irrigated soybean crops, with the first plot situated on the right bank (plot No. 1) and the second on the left bank (plot No. 2) of the lower Volga River. Two experimental soil moisture geodatasets were created through measurements and geo-referencing points using the gravimetric method (for plot No. 1) and the proximal sensing method (for plot No. 2) employing the Soil Moisture Sensor ML3-KIT (THETAKIT, Delta). The soil moisture retrieval algorithm was based on the use of a neural network to predict the reflection coefficient of an electro-magnetic wave from the soil surface, followed by inversion into soil moisture using a dielectric model that takes into account the soil texture. The input parameter of the neural network was the ratio of the microwave radar vegetation index (calculated based on Sentinel-1 data) to the index (calculated based on the data of multispectral optoelectronic channels 8 and 11 of Sentinel-2). The retrieved soil moisture values were compared with in situ measurements, showing a determination coefficient of 0.44–0.65 and a standard deviation of 2.4–4.2% for plot No. 1 and similar metrics for plot No. 2. The conducted research laid the groundwork for developing a new technology for remote sensing of soil moisture content in agrophytocenosis, serving as a crucial component of precision farming systems and agroecology. The integration of this technology promotes sustainable agricultural practices by minimizing water consumption while maximizing crop productivity. This aligns with broader environmental goals of conserving natural resources and reducing agricultural runoff. On a larger scale, data derived from such studies can inform policy decisions related to water resource management, guiding regulations that promote efficient water use in agriculture.
- 4 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (21) , 9606
Open AccessMapping Soil Surface Moisture of an Agrophytocenosis via a Neural Network Based on Synchronized Radar and Multispectral Optoelectronic Data of SENTINEL-1,2—Case Study on Test Sites in the Lower Volga Region
In this article, the authors developed a novel method for the moisture mapping of the soil surface of agrophytocenosis using a neural network based on synchronized radar and multispectral optoelectronic data from Sentinel-1,2. The significance of this research lies in its potential to enhance precision farming practices, which are increasingly vital in addressing global agricultural challenges such as water scarcity and the need for sustainable resource management. To verify the developed method, data from two experimental plots were utilized. These plots were located on irrigated soybean crops, with the first plot situated on the right bank (plot No. 1) and the second on the left bank (plot No. 2) of the lower Volga River. Two experimental soil moisture geodatasets were created through measurements and geo-referencing points using the gravimetric method (for plot No. 1) and the proximal sensing method (for plot No. 2) employing the Soil Moisture Sensor ML3-KIT (THETAKIT, Delta). The soil moisture retrieval algorithm was based on the use of a neural network to predict the reflection coefficient of an electro-magnetic wave from the soil surface, followed by inversion into soil moisture using a dielectric model that takes into account the soil texture. The input parameter of the neural network was the ratio of the microwave radar vegetation index (calculated based on Sentinel-1 data) to the index (calculated based on the data of multispectral optoelectronic channels 8 and 11 of Sentinel-2). The retrieved soil moisture values were compared with in situ measurements, showing a determination coefficient of 0.44–0.65 and a standard deviation of 2.4–4.2% for plot No. 1 and similar metrics for plot No. 2. The conducted research laid the groundwork for developing a new technology for remote sensing of soil moisture content in agrophytocenosis, serving as a crucial component of precision farming systems and agroecology. The integration of this technology promotes sustainable agricultural practices by minimizing water consumption while maximizing crop productivity. This aligns with broader environmental goals of conserving natural resources and reducing agricultural runoff. On a larger scale, data derived from such studies can inform policy decisions related to water resource management, guiding regulations that promote efficient water use in agriculture.
- 4 October 2024
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 45 (24) , 9221-9234
Interaction of a UWB impulse with a layer of sandy soil, having a rough upper boundary
- 4 October 2024
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 45 (24) , 9221-9234
Interaction of a UWB impulse with a layer of sandy soil, having a rough upper boundary
- Open Access
- 24 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (19) , 3547
Measuring Biophysical Parameters of Wheat Canopy with MHz- and GHz-Frequency Range Impulses Employing Contactless GPR
In this paper, the advantages of the joint use of MHz- and GHz-frequency band impulses when employing contactless ground penetration radar (GPR) for the remote sensing of biomass, the height of the wheat canopy, and underlying soil moisture were experimentally investigated. A MHz-frequency band nanosecond impulse with a duration of 1.2 ns (average frequency of 750 MHz and spectrum bandwidth of 580 MHz, at a level of –6 dB) was emitted and received by a GPR OKO-3 equipped with an AB-900 M3 antenna unit. A GHz-frequency band sub-nanosecond impulse with a duration of 0.5 ns (average frequency of 3.2 GHz and spectral bandwidth of 1.36 GHz, at a level of −6 dB) was generated using a horn antenna and a Keysight FieldFox N9917B 18 GHz vector network analyzer. It has been shown that changes in the relative amplitudes and time delays of nanosecond impulses, reflected from a soil surface covered with wheat at a height from 0 to 87 cm and fresh above-ground biomass (AGB) from 0 to 1.5 kg/m2, do not exceed 6% and 0.09 ns, respectively. GPR nanosecond impulses reflected/scattered by the wheat canopy have not been detected. In this research, sub-nanosecond impulses reflected/scattered by the wheat canopy have been confidently identified and make it possible to measure the wheat height (fresh AGB up to 2.3 kg/m2 and height up to 104 cm) with a determination coefficient (R2) of ~0.99 and a bias of ~−7 cm, as well as fresh AGB where R2 = 0.97, with a bias = −0.09 kg/m2, and a root-mean-square error of 0.1 kg/m2. The joint use of impulses in two different MHz- and GHz-frequency bands will, in the future, make it possible to create UAV-based reflectometers for simultaneously mapping the soil moisture, height, and biomass of vegetation for precision farming systems.
- 24 September 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (19) , 3547
Open AccessMeasuring Biophysical Parameters of Wheat Canopy with MHz- and GHz-Frequency Range Impulses Employing Contactless GPR
In this paper, the advantages of the joint use of MHz- and GHz-frequency band impulses when employing contactless ground penetration radar (GPR) for the remote sensing of biomass, the height of the wheat canopy, and underlying soil moisture were experimentally investigated. A MHz-frequency band nanosecond impulse with a duration of 1.2 ns (average frequency of 750 MHz and spectrum bandwidth of 580 MHz, at a level of –6 dB) was emitted and received by a GPR OKO-3 equipped with an AB-900 M3 antenna unit. A GHz-frequency band sub-nanosecond impulse with a duration of 0.5 ns (average frequency of 3.2 GHz and spectral bandwidth of 1.36 GHz, at a level of −6 dB) was generated using a horn antenna and a Keysight FieldFox N9917B 18 GHz vector network analyzer. It has been shown that changes in the relative amplitudes and time delays of nanosecond impulses, reflected from a soil surface covered with wheat at a height from 0 to 87 cm and fresh above-ground biomass (AGB) from 0 to 1.5 kg/m2, do not exceed 6% and 0.09 ns, respectively. GPR nanosecond impulses reflected/scattered by the wheat canopy have not been detected. In this research, sub-nanosecond impulses reflected/scattered by the wheat canopy have been confidently identified and make it possible to measure the wheat height (fresh AGB up to 2.3 kg/m2 and height up to 104 cm) with a determination coefficient (R2) of ~0.99 and a bias of ~−7 cm, as well as fresh AGB where R2 = 0.97, with a bias = −0.09 kg/m2, and a root-mean-square error of 0.1 kg/m2. The joint use of impulses in two different MHz- and GHz-frequency bands will, in the future, make it possible to create UAV-based reflectometers for simultaneously mapping the soil moisture, height, and biomass of vegetation for precision farming systems.
- 1 September 2024
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2024 (9)
Using the modified method of auxiliary sources in the diffraction problem of an electromagnetic impulse on a subsurface impedance cylinder
In contrast to the classical method of auxiliary sources (MAS) with the location of discrete sources (DS) on a closed additional contour, this article investigates the use of a complete system of functions for describing DS fields localized on an open curve in a modified MAS (MMAS). The MMAS was applied to solve a two-dimensional diffraction problem of a broadband electromagnetic impulse on an impedance cylinder located in free space and in the subsurface. The electric thread was a source of external current, excited by an impulse of 1.6 ns duration with a spectrum width from 122 MHz to 726 MHz (at the level of -6 dB). In various combinations, fresh water, thawed and frozen soil, air, and ice were used as the filling medium of the cylinder and the dielectric half-space. The complete system of functions for describing the fields of DS was constructed based on the Hankel functions of the first kind of zero order, the corresponding Green's function for the layered medium problem, and their derivatives in the direction of normal to the curve on which the DS was placed. When compared with the finite difference time domain method (FDTD), it is shown that the MMAS, using Leontovich impedance boundary conditions, can describe impulse fields, scattered by a dielectric cylinder with practically significant accuracy. It has been established that in the case of an elliptical cylinder, the MMAS requires approximately half as many auxiliary DSs compared to the classical MAS while achieving the same accuracy of the solution. In general, this article confirms the possibility of using a complete system of functions to describe the fields of DSs, localized on an open curve for the solving of impulse diffraction problems on subsurface impedance cylinders.
- 1 September 2024
- Published by Kotelnikov Institute of Radioengineering and Electronics of Russian Academy of Sciences in Journal of Radio Electronics
- Vol. 2024 (9)
Using the modified method of auxiliary sources in the diffraction problem of an electromagnetic impulse on a subsurface impedance cylinder
In contrast to the classical method of auxiliary sources (MAS) with the location of discrete sources (DS) on a closed additional contour, this article investigates the use of a complete system of functions for describing DS fields localized on an open curve in a modified MAS (MMAS). The MMAS was applied to solve a two-dimensional diffraction problem of a broadband electromagnetic impulse on an impedance cylinder located in free space and in the subsurface. The electric thread was a source of external current, excited by an impulse of 1.6 ns duration with a spectrum width from 122 MHz to 726 MHz (at the level of -6 dB). In various combinations, fresh water, thawed and frozen soil, air, and ice were used as the filling medium of the cylinder and the dielectric half-space. The complete system of functions for describing the fields of DS was constructed based on the Hankel functions of the first kind of zero order, the corresponding Green's function for the layered medium problem, and their derivatives in the direction of normal to the curve on which the DS was placed. When compared with the finite difference time domain method (FDTD), it is shown that the MMAS, using Leontovich impedance boundary conditions, can describe impulse fields, scattered by a dielectric cylinder with practically significant accuracy. It has been established that in the case of an elliptical cylinder, the MMAS requires approximately half as many auxiliary DSs compared to the classical MAS while achieving the same accuracy of the solution. In general, this article confirms the possibility of using a complete system of functions to describe the fields of DSs, localized on an open curve for the solving of impulse diffraction problems on subsurface impedance cylinders.
- 19 February 2024
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 45 (5) , 1498-1521
On the use of dual-polarized multi-angular observations of P-band brightness temperature for soil moisture profile retrieval in thawed mineral soil
- 19 February 2024
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 45 (5) , 1498-1521
On the use of dual-polarized multi-angular observations of P-band brightness temperature for soil moisture profile retrieval in thawed mineral soil
- 12 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-11
The Effect of Dielectric Relaxation Processes on the Complex Dielectric Permittivity of Soils at Frequencies From 10 kHz to 8 GHz—Part II: Broadband Analysis
This paper is the second in a series evaluating the effect of dielectric relaxation processes on the relative effective complex dielectric permittivity (RCP) of soils. Part II is based on the results of experimental measurements in the frequency range 10 kHz to 8-20 GHz. The broadband dielectric spectrum model includes the high-frequency part as a model of the dielectric mixture and the relaxation part as the sum of three relaxation processes modeled by the Debye and Cole-Cole formulas. For modeling the high-frequency part of the spectrum, the Dobson and Mironov models were considered as possible options. As stated in Part I, the influence of relaxation processes on the imaginary part of the RCP extends up to frequencies of a units of gigahertz. The increase in the imaginary part in these models was compensated by unrealistically high values of the specific electrical conductivity of free and bound water. We examined the correspondence of these models to experimental data at frequencies above 2-5 GHz, assuming that the conductivity of bound and free water is zero. The parameters of relaxation processes were found while solving the least-square optimization problem using the technique for determining the continuous distribution of relaxation times. Found process parameters depend on the content of clay, organic carbon and moisture of the samples. The more clay is in the soil, the greater the strength of these processes is. The influence of organic carbon with the conditions being equal consists in reduction of the real and imaginary parts of RCP.
- 12 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-11
The Effect of Dielectric Relaxation Processes on the Complex Dielectric Permittivity of Soils at Frequencies From 10 kHz to 8 GHz—Part II: Broadband Analysis
This paper is the second in a series evaluating the effect of dielectric relaxation processes on the relative effective complex dielectric permittivity (RCP) of soils. Part II is based on the results of experimental measurements in the frequency range 10 kHz to 8-20 GHz. The broadband dielectric spectrum model includes the high-frequency part as a model of the dielectric mixture and the relaxation part as the sum of three relaxation processes modeled by the Debye and Cole-Cole formulas. For modeling the high-frequency part of the spectrum, the Dobson and Mironov models were considered as possible options. As stated in Part I, the influence of relaxation processes on the imaginary part of the RCP extends up to frequencies of a units of gigahertz. The increase in the imaginary part in these models was compensated by unrealistically high values of the specific electrical conductivity of free and bound water. We examined the correspondence of these models to experimental data at frequencies above 2-5 GHz, assuming that the conductivity of bound and free water is zero. The parameters of relaxation processes were found while solving the least-square optimization problem using the technique for determining the continuous distribution of relaxation times. Found process parameters depend on the content of clay, organic carbon and moisture of the samples. The more clay is in the soil, the greater the strength of these processes is. The influence of organic carbon with the conditions being equal consists in reduction of the real and imaginary parts of RCP.