MSMxolisi Brendon Shongwe

Mxolisi Brendon Shongwe

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mxolisi Brendon Shongwe has a total of 169 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multiscale Experimental Techniques for Evaluating Hydrogen Resistance in Structural Alloys for Energy Systems

    by Samson Olaitan Jeje, Nicholus Malatji, Lehlogonolo Rudolf Kanyane, Mxolisi Brendon Shongwe

    The reliable qualification of structural alloys for hydrogen energy applications demands experimental frameworks capable of resolving hydrogen‐induced degradation across multiple length scales, from atomic hydrogen‐lattice interactions to macroscopic fracture. This review provides a critical assessment of experimental techniques for evaluating hydrogen resistance in structural alloys, examining their capabilities, limitations, and relevance to hydrogen energy infrastructure. The principal degradation mechanisms, hydrogen‐enhanced localized plasticity, hydrogen‐enhanced decohesion, and hydride‐induced embrittlement, are examined alongside their experimental signatures, with attention to unresolved discrepancies between permeation‐ and desorption‐derived transport data. Macroscale mechanical testing, transport characterization, microstructural and nanoscale methods, and operando approaches are evaluated against recently codified fatigue design curves and qualification standards, revealing that fragmented, single‐technique application continues to limit translation into reliable material selection criteria. A multiscale experimental framework is proposed, linking degradation mechanisms to technique selection, cross‐scale data integration, and machine‐learning‐assisted qualification across four hydrogen energy contexts: pipelines, pressure vessels, turbines, and fuel cell systems. Infrastructure gaps, unharmonized transport‐testing protocols, and characterization challenges posed by emerging systems, including high‐entropy alloys and engineered barrier coatings, are identified as principal barriers, and a shared, structured hydrogen‐materials data repository is argued as a prerequisite for accelerated, responsible deployment of hydrogen energy technologies.

  • Open Access

    Phosphate Adsorption–Desorption Performance of Fe–Co–Zn Mixed Oxide Nanocomposite: Structural Features and Environmental Applications

    by Endazenaw Bizuneh Chemere, Wakshuma Yadesa Mergo, Lemma Temesgen, Mapula Lucey Mavhungu, Washington Mhike, Mxolisi Brendon Shongwe, Abolanle Saheed Adekunle

    Phosphorus scarcity and pollution pose dual global challenges, necessitating advanced sorbent materials for sustainable remediation. In this study, a Fe–Co–Zn mixed oxide nanocomposite (MONC) was synthesized via co-precipitation and comprehensively characterized using XRD, FTIR, SEM, and BET analyses. The composite exhibited a mesoporous framework with a surface area above 16 m 2 /g, heterogeneous morphology, and abundant active sites. The point of zero charge (pHpzc = 7.1) confirmed amphoteric behavior, enabling effective phosphate uptake under acidic conditions. Batch adsorption experiments identified the 2:3:1 Fe–Co–Zn ratio as optimal, achieving a maximum capacity of 6.58 mg/g at 25 °C. Kinetic modeling followed a pseudo-second-order model (R 2 = 0.99273), validating chemisorption as the rate-controlling mechanism. Isotherm modeling across 25–50 °C strongly favored the Langmuir model (R 2 = 0.99626–0.99693), indicating monolayer adsorption and finite site saturation. Thermodynamic analysis revealed endothermic behavior, with stronger sorbate–sorbent interactions at elevated temperatures. Soil sorption–desorption experiments demonstrated increased phosphate release with higher initial concentrations (10–50 mg/kg), yet desorption efficiency remained consistently lower than adsorption, indicating strong binding and partial irreversibility. These findings highlight the Fe–Co–Zn MONC’s structural stability, high adsorption efficiency, and environmental relevance, positioning it as a promising candidate for scalable phosphate recovery and pollution mitigation in aqueous and soil systems.


  • Innovative Approaches in Spark Plasma Sintering of Titanium Alloys: Bridging Traditional and Emerging Applications

    by Samson Olaitan Jeje, Ezinne Igbokwe, Mxolisi Brendon Shongwe

    This review explores the recent innovations and advancements in Spark Plasma Sintering (SPS) technology and its impact on the development and application of titanium alloys. SPS is a versatile sintering technique known for its ability to produce high-density materials with exceptional properties through rapid heating and high-pressure processing. The review highlights key innovations, including the development of gradient structures, nanostructuring techniques, and hybrid approaches that integrate SPS with additive manufacturing. These advancements have significantly enhanced the mechanical properties, performance, and manufacturing capabilities of titanium alloys. Additionally, the review examines the impact of these innovations on industry and research. In industry, the advancements in SPS and titanium alloys have led to improvements in product performance and the production of complex, high-performance components for aerospace, biomedical, and energy applications. Research has been enriched by the exploration of novel sintering additives, advanced alloy compositions, and sustainable practices, driving further discoveries and practical solutions. The review concludes with a discussion of the current challenges and opportunities associated with SPS and titanium alloy technologies. It emphasizes the importance of addressing these challenges to fully realize the potential of SPS and titanium alloys in modern engineering applications. By bridging traditional manufacturing methods with emerging technologies, SPS continues to offer transformative solutions and unlock new possibilities in material science and manufacturing.

  • Effect of alkali-metal substitution on hydrogen storage properties of NaMgH3 hydride perovskites: DFT insights

    by Kefyalew Wagari Guji, Tesfaye Abebe Geleta, Kuo-Long Pan, Mxolisi Brendon Shongwe, Lehlogonolo Rudolf Kanyane, Nicholus Malatji

  • Microstructural and Electrochemical Properties of CoNiV/Nb/Cr Medium Entropy Alloys

    by Nicholus Malatji, Lehlogonolo Rudolf Kanyane, Praise Mpofu, Mxolisi Brendon Shongwe

    Face-centered cubic (FCC) medium-entropy alloys (MEAs) are known for their excellent ductility and fracture toughness, but they suffer from relatively low mechanical strength. Alloying elements are added in FCC MEA matrix to promote the formation of hard secondary phase or intermetallic compounds that improve the mechanical performance of the alloys. In this study, the effect of chromium (Cr) and niobium (Nb) additions on the microstructural and corrosion characteristics of the CoNiV MEA matrix was investigated. A scanning electron microscope coupled with energy dispersive spectroscopy was used to analyse the microstructure and composition of the developed alloys. The corrosion properties of the alloys were evaluated using linear polarization. The alloys exhibited a dendritic microstructure with the presence of secondary phases, which is consistent with slow cooling associated with arc melting and the presence of elements with large atomic radii that upset the crystal lattice. Alloy containing Cr possessed better anti-corrosive properties than its Nb counterpart, signalling formation of a more stable Cr 2 O 3 passive film. This layer creates a boundary between the corrosive medium and the alloy substrate to prevent further interaction.

  • Heat-Treatment Induced Phase Stability and High-Temperature Corrosion Behavior of AlCrFeCuNi-NbX High Entropy Alloy

    by Lehlogonolo Rudolf Kanyane, Nicholas Malatji, Mbongeni Tlou, Mxolisi Brendon Shongwe

    This research investigates the impact of heat treatment and high-temperature oxidation on the phase transformation and performance of AlCrFeCuNi-Nb high-entropy alloys (HEAs). The alloys were produced using laser deposition and methodically heat-treated to enhance their structural stability. X-ray diffraction (XRD) was employed for phase analysis to examine phase alterations resulting from Nb addition and thermal exposure. Results indicate that Nb boosts phase stability, facilitates the production of protective oxide layers, and increases resistance to high-temperature oxidation. The enhanced alloy demonstrated exceptional oxidation resistance and mechanical properties. These findings underscore the promise of Nb-doped HEAs for engineering applications that necessitate resilient, high-performance materials capable of enduring harsh temperatures and corrosive conditions.

  • Open Access

    Fabrication and Characterization of Co‐Based Medium‐Entropy Alloys for Structural and Functional Applications: A Comprehensive Review

    by Kazeem Oladiti Sanusi, Nicholus Malatji, Samson Olaitan Jeje, Lehlogonolo Rudolf Kanyane, Mxolisi Brendon Shongwe

    Co‐based medium‐entropy alloys (MEAs) have attracted considerable interest in materials science due to their excellent mechanical properties, thermal stability, and superior resistance to oxidation, corrosion, and wear. These alloys, characterized by a balanced composition of multiple principal elements, exhibit remarkably high‐temperature strength, making them suitable for aerospace, energy, and biomedical applications. Various synthesis methods, including arc melting, powder metallurgy, additive manufacturing, and mechanical alloying, have been explored to optimize their microstructure and enhance performance. Despite their promising advantages, Co‐based MEAs face several challenges, such as high material and processing costs, limited ductility, and difficulties in large‐scale manufacturing. Additionally, sustainability concerns related to cobalt extraction and alloy recyclability require further research to develop eco‐friendly processing and recovery methods. This review comprehensively analyzes the fabrication techniques, microstructural characteristics, mechanical and thermophysical properties, and potential applications of Co‐based MEAs. Furthermore, it discusses the existing challenges and future research directions, including alloy design strategies, advanced processing techniques, and sustainable manufacturing approaches. By addressing these challenges, Co‐based MEAs have the potential to revolutionize high‐performance materials for next‐generation structural and functional applications.


  • Open Access

    Nanoindentation Properties of Ti‐ y Al‐Mo Fabricated via Plasma Activated Sintering

    by Samson Olaitan Jeje, Mxolisi Brendon Shongwe

    Titanium alloys are widely used in aerospace, biomedical and energy applications, but the low hardness and limited plastic deformation resistance of commercially pure titanium (CP‐Ti) remain key limitations. In this study, Ti‐ y Al‐1Mo ( y = 3, 5 and 7 wt.%) alloys were fabricated via plasma‐activated sintering and evaluated using instrumented nanoindentation. All alloys achieved near‐full densification and exhibited predominantly α ‐Ti with minor β ‐Ti and localised Mo‐rich regions, consistent with composition‐driven phase evolution. Nanoindentation revealed a strong composition‐dependent improvement in mechanical response: at 100 mN, hardness and elastic modulus increased from 2.5396 GPa and 113.6 GPa (CP‐Ti) to 5.4139 GPa and 149.8 GPa for Ti‐7Al‐1Mo. A similar trend persisted at 200 mN, with a slight hardness reduction attributed to the indentation size effect. Yield strain and yield pressure values further confirmed enhanced plastic deformation resistance. One‐way ANOVA verified that these improvements are statistically significant. The combined α ‐stabilising and β ‐stabilising effects of Al and Mo highlight the effectiveness of dual alloying in tailoring the nanomechanical properties of near‐α titanium alloys.

  • Open Access

    Effects of Niobium Addition on Face‐Centered Cubic Crystal‐Structured High‐Entropy Alloys

    by Thapelo Mogakane, Fainah Madewu, Nicholas Malatji, Lehlogonolo Rudolf Kanyane, Mxolisi Brendon Shongwe, Monnamme Tlotleng

    High‐entropy alloys (HEAs) represent a new approach in alloy design. Unlike traditional alloys, HEAs are made by combining several main elements in almost equal amounts, which results in unique mechanical and structural properties. One element that has gained a lot of attention for its role in HEAs is niobium (Nb). This is because Nb can enhance the alloy’s resistance to harsh environments, help control its structure and phases, and improve its strength. This review looks closely at how adding Nb to face‐centered cubic (FCC) HEAs affects various properties, such as how the alloy changes phases, its grain structure, strength, and resistance to oxidation and corrosion. It also discusses how different methods of producing these alloys, like vacuum arc melting, powder metallurgy, and 3D printing, can impact their structure and properties. The review further discusses the latest research on modeling HEAs, processing techniques, and the potential uses of Nb‐containing HEAs in different industries.


  • Hot Corrosion, Phase Stability and Compressive Strength of AlCrFeNiCu-Nb High Entropy Alloy Fabricated via Additive Manufacturing

    by Lehlogonolo Rudolf Kanyane, Nicholas Malatji, Mxolisi Brendon Shongwe

    This work examines the phase stability during hot corrosion and the compressive strength of the AlCrFeNiCu-Nb high entropy alloy (HEA) produced using laser additive manufacturing, emphasizing its prospective uses in energy materials. The alloy's distinctive composition was chosen for its capacity to endure severe environments, including elevated temperatures and corrosive conditions, essential for energy-related applications. Phase stability was evaluated by X-ray diffraction, demonstrating remarkable preservation of critical phases despite high-temperature oxidation exposure. Compressive strength tests revealed the alloy's exceptional mechanical capabilities, underscoring its significant resistance to deformation. The AlCrFeNiCu-Nb HEA demonstrates significant promise for application in rigorous energy sectors, encompassing components for advanced power generation systems, high-temperature reactors, and corrosive conditions inside energy infrastructure.