Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiao Fu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Novel Time Delay Estimation Algorithm for 5G Vehicle Positioning in Urban Canyon Environments

    by Zhongliang Deng, Xinyu Zheng, Hanhua Wang, Xiao Fu, Lu Yin, Wen Liu

    Vehicle positioning with 5G can effectively compensate for the lack of vehicle positioning based on GNSS (Global Navigation Satellite System) in urban canyons. However, there is also a large ranging error in the non-line of sight (NLOS) propagation of 5G. Aiming to solve this problem, we consider a new time delay estimation algorithm called non-line of sight cancellation multiple signal classification (NC-MUSIC). This algorithm uses cross-correlation to identify and cancel the NLOS signal. Then, an unsupervised multipath estimation method is used to estimate the number of multipaths and extract the noise subspace. The MUSIC spectral function can be calculated by the noise subspace. Finally, the time delay of the direct path is estimated by searching the peak of MUSIC spectral function. This paper adopts the 5G channel model developed by 3GPP TR38.901 for simulation experiments. The experiment results demonstrated that the proposed algorithm has obvious advantages in terms of NLOS propagation for urban canyon environments. It provided a high-precision time delay estimation algorithm for observed time difference of arrival (OTDOA), joint angle of arrival (AOA) ranging, and other positioning methods in the 5G vehicle positioning method, which can effectively improve the positioning accuracy of 5G vehicle positioning in urban canyon environments.


  • Open Access

    A Fine Fast Acquisition Scheme for a Communication and Navigation Fusion System

    by Zhongliang Deng, Buyun Jia, Shihao Tang, Xiao Fu

    A novel communication and navigation fusion system (CNFS) based on cellular communication system is developed to realize high-accuracy localization. Because of the small signal coverage of every transmitter and the fluctuation of received signal and noise, the CNFS positioning receiver requires fast processing of signal and stable performance. As the first operation performed by receiver, signal acquisition with fast speed and stable detection performance should be realized. This paper proposed a novel fast acquisition method with fine detection performance using search space reduction (SSR) and DD-MAX/TC-CACFAR techniques. SSR method is utilized to reduce the size and number of search space in the cross ambiguity function (CAF) evaluation stage. DD-MAX/TC-CACFAR method is employed to realize fine and stable detection performance in signal detection stage. The expressions of acquisition time are then derived considering the size and number of search space and the detection performance. Theoretical performance analysis and Monte Carlo simulation, which contain the comparison with other acquisition method, are presented to demonstrate the effectiveness of proposed method. Simulation and analysis results show that the proposed method can realize fast acquisition with fine and stable detection performance.


  • Open Access

    Indoor NLOS Positioning System Based on Enhanced CSI Feature with Intrusion Adaptability

    by Ke Han, Lingjie Shi, Zhongliang Deng, Xiao Fu, Yun Liu

    With the wide deployment of commercial WiFi devices, the fine-grained channel state information (CSI) has received widespread attention with broad application domain including indoor localization and intrusion detection. From the perspective of practicality, dynamic intrusion may be confused under non-line-of-sight (NLOS) conditions and the continuous operation of passive positioning system will bring much unnecessary computation. In this paper, we propose an enhanced CSI-based indoor positioning system with pre-intrusion detection suitable for NLOS scenarios (C-InP). It mainly consists of two modules: intrusion detection and positioning estimation. The introduction of detection module is a prerequisite for positioning module. In order to improve the discrimination of features under NLOS conditions, we propose a modified calibration method for phase transformation while the amplitude outliers are filtered by the variance distribution with the median sequence. In addition, binary and improved multiple support vector classification (SVC) models are established to realize NLOS intrusion detection and high-discrimination fingerprint localization, respectively. Comprehensive experimental verification is carried out in typical indoor scenarios. Experimental results show that C-InP outperforms the existing system in NLOS environments, where the mean distance error (MDE) reached 0.49 m in the integrated room and 0.81 m in the complex garage, respectively.


  • Open Access

    A Closed-Form Localization Algorithm and GDOP Analysis for Multiple TDOAs and Single TOA Based Hybrid Positioning

    by Zhongliang Deng, Hanhua Wang, Xinyu Zheng, Xiao Fu, Lu Yin, Shihao Tang, Fuxing Yang

    Cellular communication systems support mobile phones positioning function for Enhanced-911 (E-911) location requirements, but the positioning accuracy is poor. The fifth-generation (5G) cellular communication system can use indoor distribution systems to provide accurate multiple time-difference-of-arrival (TDOA) and single time-of-arrival (TOA) measurements, which could significantly improve the indoor positioning ability. Unlike iterative localization algorithms for TDOA or TOA, the existing closed-form algorithms, such as the Chan-Ho algorithm, do not have convergence problems, but can only estimate position based on one kind of measurement. This paper proposes a closed-form localization algorithm for multiple TDOAs and single TOA measurements. The proposed algorithm estimates the final position result using three-step weighted least squares (WLSs). The first WLS provides an initial position for the last two steps. Then the algorithm uses two WLSs to estimate position based on heteroscedastic TDOA and TOA measurements. In addition, the geometric dilution of precision (GDOP) of the proposed hybrid TDOA and TOA positioning has been derived. The analysis of GDOP shows that the proposed hybrid positioning has lower GDOP than TDOA-only positioning, which means the proposed hybrid positioning has a higher accuracy limitation than TDOA-only positioning. The simulation shows that the proposed localization algorithm could have better performance than closed-form TDOA-only positioning methods, and the positioning accuracy could approximate Cramer-Rao lower bound (CRLB) when the TDOA measurement errors are small.


  • Open Access

    Fine Frequency Acquisition Scheme in Weak Signal Environment for a Communication and Navigation Fusion System

    by Zhongliang Deng, Buyun Jia, Shihao Tang, Xiao Fu, Jun Mo

    A novel communication and navigation fusion system (CNFS) was developed to realized high accuracy positioning in constrained conditions. Communication and navigation fusion signal transmitted by base stations are in the same time and frequency band but are allocated different power levels. The positioning receiver of CNFS requires signal coverage of at least four base stations to realize positioning. The improvement of receiver sensitivity is an important way to expand signal coverage of base station. As an essential stage of signal processing in CNFS positioning receiver, signal acquisition requires a trade-off between improvement of acquisition frequency accuracy and reduction in computational load. A new acquisition algorithm called PMF-FC-BA-FFT method is proposed to acquire the carrier frequency accurately with lower computational load in a weak signal environment. The received signal is firstly filtered by partially matched filters (PMF) with local replica pseudorandom noise (PRN) sequences being coefficients to strip off the PRN code in the signal. Frequency compensation (FC) was performed to avoid the large attenuation in block accumulation (BA) and generate a series of signals with a small frequency offset step. Block accumulation was then executed. Finally, the acquisition detection was performed based on a series of fast Fourier transformation (FFT) outputs to obtain acquisition results with fine frequency estimation. Simulations and experimental tests results show that the proposed method can realize high accuracy frequency acquisition in a weak signal environment with fewer computational resources compared with existing acquisition methods.


  • Open Access

    CC-DTW: An Accurate Indoor Fingerprinting Localization Using Calibrated Channel State Information and Modified Dynamic Time Warping

    by Zhongliang Deng, Xiao Fu, Qianqian Cheng, Lingjie Shi, Wen Liu

    Indoor wireless local area network (WLAN) based positioning technologies have boomed recently because of the huge demands of indoor location-based services (ILBS) and the wide deployment of commercial Wi-Fi devices. Channel state information (CSI) extracted from Wi-Fi signals could be calibrated and utilized as a fine-grained positioning feature for indoor fingerprinting localization. One of the main factors that would restrict the positioning accuracy of fingerprinting systems is the spatial resolution of fingerprints (SRF). This paper mainly focuses on the improvement of SRF for indoor CSI-based positioning and a calibrated CSI feature (CCF) with high SRF is established based on the preprocess of both measured amplitude and phase. In addition, a similarity calculation metric for the proposed CCF is designed based on modified dynamic time warping (MDTW). An indoor fingerprinting method based on CCF and MDTW, named CC-DTW, is then proposed to improve the positioning accuracy in indoors. Experiments are conducted in two indoor office testbeds, and the performances of the proposed CC-DTW, one time-reversal (TR) based approach and one Euclidean distance (ED) based approach are evaluated and discussed. The results show that the SRF of CC-DTW outperforms the TR-based one and the ED-based one in both two testbeds in terms of the receiver operating characteristic (ROC) curve metric, and the area under curve (AUC) metric.


  • Open Access

    An IMU-Aided Body-Shadowing Error Compensation Method for Indoor Bluetooth Positioning

    by Zhongliang Deng, Xiao Fu, Hanhua Wang

    Research on indoor positioning technologies has recently become a hotspot because of the huge social and economic potential of indoor location-based services (ILBS). Wireless positioning signals have a considerable attenuation in received signal strength (RSS) when transmitting through human bodies, which would cause significant ranging and positioning errors in RSS-based systems. This paper mainly focuses on the body-shadowing impairment of RSS-based ranging and positioning, and derives a mathematical expression of the relation between the body-shadowing effect and the positioning error. In addition, an inertial measurement unit-aided (IMU-aided) body-shadowing detection strategy is designed, and an error compensation model is established to mitigate the effect of body-shadowing. A Bluetooth positioning algorithm with body-shadowing error compensation (BP-BEC) is then proposed to improve both the positioning accuracy and the robustness in indoor body-shadowing environments. Experiments are conducted in two indoor test beds, and the performance of both the BP-BEC algorithm and the algorithms without body-shadowing error compensation (named no-BEC) is evaluated. The results show that the BP-BEC outperforms the no-BEC by about 60.1% and 73.6% in terms of positioning accuracy and robustness, respectively. Moreover, the execution time of the BP-BEC algorithm is also evaluated, and results show that the convergence speed of the proposed algorithm has an insignificant effect on real-time localization.


  • Open Access

    Coordinate-Based Clustering Method for Indoor Fingerprinting Localization in Dense Cluttered Environments

    by Wen Liu, Xiao Fu, Zhongliang Deng

    Indoor positioning technologies has boomed recently because of the growing commercial interest in indoor location-based service (ILBS). Due to the absence of satellite signal in Global Navigation Satellite System (GNSS), various technologies have been proposed for indoor applications. Among them, Wi-Fi fingerprinting has been attracting much interest from researchers because of its pervasive deployment, flexibility and robustness to dense cluttered indoor environments. One challenge, however, is the deployment of Access Points (AP), which would bring a significant influence on the system positioning accuracy. This paper concentrates on WLAN based fingerprinting indoor location by analyzing the AP deployment influence, and studying the advantages of coordinate-based clustering compared to traditional RSS-based clustering. A coordinate-based clustering method for indoor fingerprinting location, named Smallest-Enclosing-Circle-based (SEC), is then proposed aiming at reducing the positioning error lying in the AP deployment and improving robustness to dense cluttered environments. All measurements are conducted in indoor public areas, such as the National Center For the Performing Arts (as Test-bed 1) and the XiDan Joy City (Floors 1 and 2, as Test-bed 2), and results show that SEC clustering algorithm can improve system positioning accuracy by about 32.7% for Test-bed 1, 71.7% for Test-bed 2 Floor 1 and 73.7% for Test-bed 2 Floor 2 compared with traditional RSS-based clustering algorithms such as K-means.


  • Smallest enclosing circle-based fingerprint clustering and modified-WKNN matching algorithm for indoor positioning

    by Wen Liu, Xiao Fu, Zhongliang Deng, Lianming Xu, Jichao Jiao

    Methods to cluster fingerprints based on Smallest-Enclosing-Circle (SEC) and to modify Weighted-K-Nearest-Neighbor (WKNN) matching algorithm for indoor fingerprint positioning system are proposed. Based on the approach to computing the smallest k-enclosing circle, the method proposed clusters fingerprints in database by introducing reference points' coordinates, instead of their received signal strength (RSS). This approach performs higher accuracy of positioning areas compared to conventional clustering algorithms, which are based on RSS. Meanwhile, this paper analyses the transmission characteristics of wireless signals in dense cluttered environments, and derives a novel path-loss-model-based weight computational method for WKNN matching algorithm. A modified-WKNN (M-WKNN) matching algorithm for indoor fingerprint positioning system is proposed and experiments are implemented in China National Grand Theatre. Results show that the location area accuracy using the proposed clustering algorithm is improved by 30% compared to that using K-means algorithm, and the positioning accuracy of M-WKNN is 11.9% and 29.1% higher than that of WKNN and KNN, respectively.