Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ernesto Oyervides‐Muñoz has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis, characterization and formulation of a sodium polyaspartate derivative incorporated with wetting agents as an efficient dust suppressant for the mining industry

    by Luis Carlos Mata‐Gómez, Eric Pollet, Claudia Magdalena López‐Badillo, Corazón Giovanna Morales‐Amaya, Francisco Javier Enríquez‐Medrano, Samuel Alejandro Lozano‐Morales, Iván de Jesús Zapata‐González, Luc Avérous, Nancy Verónica Pérez‐Aguilar, Ernesto Oyervides‐Muñoz

    Dust emissions generated during mining operations represent an important environmental and occupational health concern due to their adverse effects on air quality, human health, and surrounding ecosystems. Although water spraying is commonly applied for dust control, its limited retention capacity and short‐term effectiveness have promoted the development of environmentally friendly chemical suppressants. In this study, a pyridinium modified sodium polyaspartate derivative (PAsp‐D) was synthesized through grafting of a quaternary ammonium salt onto sodium polyaspartate and evaluated as a dust suppressant for mining applications. The synthesized material was characterized by FTIR, 1 H‐NMR, and SEM. Dust suppression performance was assessed through water retention, contact angle, mechanical compression resistance, and thermo‐mechanical analysis. In addition, glycerol was incorporated at different concentrations as a wetting/plasticizing agent to evaluate its influence on the physicochemical and mechanical properties of the treated dust samples. The modified polymer exhibited improved water retention and enhanced wettability compared to water‐treated samples and unmodified polyaspartate. Formulations containing moderate glycerol concentrations showed improved elastic stability and thermal dimensional stability, whereas excessive glycerol addition reduced compressive strength and partially diminished the hydrophilic effect. SEM analysis revealed the formation of a polymer‐glycerol film surrounding dust particles and promoting particle agglomeration. The results demonstrate that quaternary ammonium‐modified polyaspartate combined with glycerol provides a tunable balance between moisture retention, elasticity, and mechanical stabilization, highlighting its potential as an environmentally friendly dust suppressant for mining applications.

  • Open Access

    Desarrollo de talco antibacterial a partir de almidón residual enriquecido con Larrea Tridentata

    by Eder Iván Martínez-Mora, Sonia Yesenia Silva-Belmares, Alejandro Zugasti-Cruz, Alberto Nuncio, Joel Fabrizzio Ramos-Rodríguez, Ernesto Oyervides Muñoz

    La Larrea tridentata, comúnmente conocida como ‘gobernadora’ o ‘creosota’ es una planta endémica de la familia Zygophyllaceae muy abundante en el norte de México. Debido a su toxicidad sus derivados no tienen muchos usos en materiales con contacto humano, por lo que, en busca de nuevas aplicaciones, la investigación se desarrolló en 2024. El trabajo se enfocó en realizar un proceso para extraer y procesar gobernadora y almidón de papa residual de la región sureste de Coahuila, en el norte de México para obtener un talco antibacterial. El producto obtenido mediante un proceso de molienda y mezclado fue caracterizado por espectrometría infrarroja, análisis termogravimétrico, se realizó una prueba de hemólisis para conocer su compatibilidad con la sangre humana y se probó sus propiedades antibacteriales mediante pruebas de antibiograma con cepas Gram-positivas de S. aureus (ATCC 6538 y ATCC 33591) obteniéndose un producto con aplicaciones como talco antibacterial por sus propiedades absorbentes de humedad, antibacteriales y de biocompatibilidad con eritrocitos de sangre humana.

  • Nanostructured Polyurethane‐Collagen Hydrogels: Bioactive Crosslinked Networks for Enhanced Wound Healing

    by María I. León‐Campos, Jesús A. Claudio‐Rizo, Luis E. Cobos‐Puc, Denis A. Cabrera‐Munguía, Anilú Rubio‐Rios, Ernesto Oyervides‐Muñoz, Angélica Velázquez‐Arrellano

    Nanostructured polyurethanes (nPUs) are promising materials for biomedical applications due to their mechanical strength, controlled degradation, and bioactivity. In this study, collagen‐based hydrogels were developed using nPUs synthesized from ethoxylated glycerol and either hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI), functionalized with L‐tyrosine (T). These nPUs were incorporated at 15% and 30% by weight into porcine dermis collagen. The HDI‐based nPUs (HDI‐T), with particle sizes between 6 and 58 nm, achieved high crosslinking densities (> 90%) and superabsorbent capacities (> 6000%), which accelerated gelation under physiological conditions. The resulting hydrogels showed enhanced elasticity and resistance to deformation—critical for wound healing. Structural analysis revealed semi‐crystalline and rough surfaces. Hydrogels crosslinked with HDI‐T (P(HDI‐T)) exhibited excellent hydrolytic stability at pH 8.5 and in simulated body fluids (SBF), as well as reduced enzymatic degradation. These systems allowed for sustained release of methylene blue at both physiological and acidic pH, while ketorolac release was more pronounced in acidic conditions. Biologically, the hydrogels were non‐hemolytic and biocompatible, promoting monocyte and fibroblast metabolic activity. Notably, P(HDI‐T30) hydrogels stimulated the release of Interleukin‐10 (IL‐10), contributing to inflammation modulation. In addition, they exhibited potent antibacterial activity, inhibiting Escherichia coli ( E. coli ) growth by up to 150% and Staphylococcus aureus ( S. aureus ) by 60% compared to controls. In vivo, complete wound closure was observed by Day 17, with regenerated tissue rich in collagen. These findings demonstrate the potential of nPU–collagen hydrogels as multifunctional biomaterials for advanced wound healing, combining mechanical integrity, controlled drug release, antibacterial efficacy, and immune modulation.


  • Anticancer and antimicrobial potential of novel xanthan gum derivatives synthesized via quaternary ammonium grafting

    by Karen Onofre-Rentería, Luis Enrique Cobos-Puc, Sonia Yesenia Silva-Belmares, Alejandro Zugasti-Cruz, Francisco Javier Enríquez-Medrano, Denis Aidee Cabrera-Munguia, Ernesto Oyervides-Muñoz


  • Special issue. Antimicrobial biopolymers: from synthesis to application

    by Ernesto Oyervides‐Muñoz, Eder Iván Martínez‐Mora

  • Xanthan Gum Production and Its Modifications to Obtain Novel Applications: A Review

    by Karen Onofre‐Rentería, Denis Aidée Cabrera‐Munguía, Luis Enrique Cobos‐Puc, Jesús Alejandro Claudio‐Rizo, Lourdes Morales‐Oyervides, Ernesto Oyervides‐Muñoz

    Biopolymers are molecules widely used in many industries because they are biodegradable and have a natural origin. Therefore, they can be obtained from renewable resources and organisms such as animals, plants, or microorganisms. Among the best‐known biopolymers, xanthan gum is an anionic biopolymer composed of glucose, mannose, glucuronic acid, pyruvic acid, and acetyl groups. It can be obtained by fermentation with bacteria of the genus Xanthomonas, has good physicochemical properties, and it is biocompatible with human cells. However, it has disadvantages as it is very susceptible to microbial contamination. Therefore, various physical, chemical, or enzymatic modification methods have been developed to improve its physicochemical and biological properties. Modifications in the backbone of the xanthan gum chains have made it possible to create xanthan gum derivatives with new uses, such as drug delivery systems and improving absorption methods in the pharmaceutical industry to enhance the efficacy of several treatments or therapeutic processes, to promote cell proliferation for tissue engineering as biomedical applications when used in systems such as hydrogels or films. They are also used in food products, in cosmetics, to recover oil from water or ground, to treat wastewater, or granting soil with good conditions to promote plant and vegetables growth. Hence, it is important to know and develop new modification methods to improve and impart new properties to obtain novel applications of xanthan gum.


  • Preparation of a starch derivative bearing chloroaniline groups and the evaluation of its hemolytic, cytotoxic and antibacterial activities

    by María Fernanda Valdez‐Valdés, Francisco Javier Enríquez‐Medrano, Alejandro Zugasti‐Cruz, Crystel Aleyvick Sierra‐Rivera, Eder Iván Martínez‐Mora, Gerardo de Jesús Sosa‐Santillán, Ernesto Oyervides‐Muñoz

    A new starch derivative with antibacterial properties and non‐hemolytic effect was synthesized through the chemical grafting of 4‐chloroaniline onto the backbone of potato starch. In a first step, starch was extracted from potatoes grown in the region of Coahuila, Mexico, using the water steeping method. The hydroxyl groups (C5‐C6) of the native starch were oxidized using sodium periodate. The resulting dialdehyde was then chemically modified through a Schiff base reaction with 4‐chloroaniline. The chemical structure of this starch derivative was confirmed by Fourier transform infrared and 1H NMR spectroscopies, the thermal properties were analyzed by thermogravimetric analysis without finding significant changes and the product showed antibacterial activity against Gram‐negative E. coli and Gram‐positive S. aureus strains. Finally, the hemolytic and cytotoxic effects of native starch and its derivative were studied, showing no hemolytic effect on isolated human red blood cells and no cytotoxic effect; therefore, it can be considered biocompatible. © 2024 Society of Chemical Industry.


  • Collagen‐polyurethane‐dextran hydrogels enhance wound healing by inhibiting inflammation and promoting collagen fibrillogenesis

    by Hilda Aguayo‐Morales, Luis E. Cobos‐Puc, Claudia M. Lopez‐Badillo, Ernesto Oyervides‐Muñoz, Gonzalo Ramírez‐García, Jesús A. Claudio‐Rizo

    Diabetic foot ulcers are a serious complication of uncontrolled diabetes, emphasizing the need to develop wound healing strategies that are not only effective but also biocompatible, biodegradable, and safe. We aimed to create biomatrices composed of semi‐interpenetrated polymer networks of collagen, polyurethane, and dextran, to enhance the wound healing process. The hydrogels were extensively characterized by various analytical techniques, including analysis of their structure, crystallinity, thermal properties, gelation process, reticulation, degradation, cell proliferation, and healing properties, among others. Semi‐interpenetrated hydrogels containing dextran at levels of 10%, 20%, and 30% exhibited porous interconnections between collagen fibers and entrapped dextran granules, with a remarkable crosslinking index of up to 94% promoted by hydrogen bonds. These hydrogels showed significant improvements in mechanical properties, swelling, and resistance to proteolytic and hydrolytic degradation. After 24 h, there was a significant increase in the viability of several cell types, including RAW 264.7 cells, human peripheral blood mononuclear cells, and dermal fibroblasts. In addition, these hydrogels demonstrated an increased release of interleukin‐10 and transforming growth factor‐beta1 while inhibiting the release of monocyte chemotactic protein‐1 and tumor necrosis factor‐alpha after 72 h. Furthermore, these hydrogels accelerated the wound healing process in diabetic rats after topical application. Notably, the biomaterial with 20% dextran (D20) facilitated wound closure in only 21 days. These results highlight the potential of the D20 hydrogel, which exhibits physicochemical and biological properties that enhance wound healing by inhibiting inflammation and fibrillogenesis while remaining safe for application to the skin.


  • Chitin and Chitosan Nanocomposites: From the Synthesis to the Application

    by E. Oyervides-Muñoz, Oyervides- Muñoz, M. A., M. A. Garcia-Lobato


  • Antimicrobial and anticancer potential of novel polyaspartate derivatives synthesized via quaternary ammonium grafting

    by Alejandro Torres‐Rodriguez, Luc Avérous, Eric Pollet, Gerardo de Jesús Sosa‐Santillán, Alejandro Zugasti‐Cruz, Crystel Aleyvick Sierra‐Rivera, Nancy Verónica Pérez‐Aguilar, Marco Antonio Garcia‐Lobato, Ernesto Oyervides‐Muñoz

    Three novel polyaspartate derivatives with antibacterial properties and low hemolytic effects are synthesized by the reaction of sodium polyaspartate (PAspNa) with different quaternary ammonium salts with a carboxylic end‐group, subsequently these are tested in vitro against different cancer and normal cell lines. 1‐(carboxypentyl) pyridinium bromide, 1‐(carboxypentyl) benzalkonium bromide, and 1‐(carboxypentyl) quinolinium bromide are synthesized from a quaternization reaction between 6‐bromohexanoic acid and the respective tertiary amines (pyridine, N,N‐dimethylbenzylamine, and quinoline). Then, these ammonium salts are chemically grafted along the sodium polyaspartate macromolecular chains through an acid–base reaction. Three different polyaspartate derivatives are obtained and their chemical structures analyzed and confirmed by FT‐IR and 1H NMR, the corresponding thermal stability is analyzed by thermogravimetric analysis. The antibacterial efficiency of these PAspNa derivatives against Escherichia coli is determined by measuring the minimum inhibitory concentration and the minimum bactericidal concentration. Hemolysis assays are performed on isolated human erythrocytes and finally the cell proliferation is studied by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) analysis. All the PAspNa derivatives show antibacterial activities, low hemolytic effects, and antiproliferative effect in some concentrations evaluated in murine fibroblast (3T3), and cancer cell lines of cervix (HeLa), breast (4T1), and liver (HepG2) cells lines.