Yan-Xuan Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yan-Xuan Wen has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
Jing Su
40 shared publicationsYun-Fei Long
School of Chemistry and Chemical Engineering, Guangxi University, Nanning, China
25 shared publicationsXiao-Yan Lv
The New Rural Development Research Institute, Guangxi University, Nanning, China
23 shared publicationsXiaoyan Lv
16 shared publications- Jing Su
School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China
14 shared publications Fan Wang
Guangxi University
8 shared publications
Latest Publications
- Open Access
- 3 September 2026
- Published by Elsevier in SSRN Electronic Journal
Enhanced AOR performance through Fe alloying of PtZn by the second electronic structure regulation: Achieving continuous spontaneous reaction process
The direct ammonia fuel cell is a promising technology for clean energy conversion. However, its commercialization is hindered by the sluggish kinetics of the anodic ammonia oxidation reaction (AOR). While alloying Pt with transition metals mitigates poisoning and PtZn lowers the *NH2→*NH barrier, the impacts of ternary alloying require systematic investigation. In this study, we systematically investigate the effects of Fe and Co incorporation into PtZn-based ternary alloys with different compositions (Pt:Zn = 3:1, with Zn:Fe/Co substitution ratios of 7:1, 3:1, and 1:1). Thermodynamic calculations confirm that AOR over all catalysts predominantly follows the Gerischer–Mauerer (GM) mechanism. The introduction of Fe and Co induces significant charge enrichment on surface Pt atoms, with Pt48Zn12Fe4 and Pt48Zn12Co4 exhibiting optimal intermediate adsorption strengths. Notably, Pt48Zn12Fe4 reduces the potential-determining step (PDS) barrier to 0.41 eV and enables spontaneous steps from the third elementary step onward, indicating that AOR proceeds rapidly after overcoming the second dehydrogenation step (NH3 + *NH2 → 2*NH2). This work elucidates the mechanism of secondary electronic structure modulation induced by a third metal, providing a theoretical framework for the rational design of efficient Pt-based AOR electrocatalysts.
- 3 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEnhanced AOR performance through Fe alloying of PtZn by the second electronic structure regulation: Achieving continuous spontaneous reaction process
The direct ammonia fuel cell is a promising technology for clean energy conversion. However, its commercialization is hindered by the sluggish kinetics of the anodic ammonia oxidation reaction (AOR). While alloying Pt with transition metals mitigates poisoning and PtZn lowers the *NH2→*NH barrier, the impacts of ternary alloying require systematic investigation. In this study, we systematically investigate the effects of Fe and Co incorporation into PtZn-based ternary alloys with different compositions (Pt:Zn = 3:1, with Zn:Fe/Co substitution ratios of 7:1, 3:1, and 1:1). Thermodynamic calculations confirm that AOR over all catalysts predominantly follows the Gerischer–Mauerer (GM) mechanism. The introduction of Fe and Co induces significant charge enrichment on surface Pt atoms, with Pt48Zn12Fe4 and Pt48Zn12Co4 exhibiting optimal intermediate adsorption strengths. Notably, Pt48Zn12Fe4 reduces the potential-determining step (PDS) barrier to 0.41 eV and enables spontaneous steps from the third elementary step onward, indicating that AOR proceeds rapidly after overcoming the second dehydrogenation step (NH3 + *NH2 → 2*NH2). This work elucidates the mechanism of secondary electronic structure modulation induced by a third metal, providing a theoretical framework for the rational design of efficient Pt-based AOR electrocatalysts.
- 3 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9155-9168
Combined Bulk-Interfacial Engineering of Ultrahigh-Nickel LiNi 0.9 Co 0.05 Mn 0.05 O 2 to Regulate Electrochemical Kinetics and Phase Reversibility under Harsh Conditions
Severe thermodynamic lattice oxygen evolution and accelerated interfacial parasitic reactions significantly deteriorate the electrochemical reversibility of ultrahigh-Ni cathodes (LiNi0.9Co0.05Mn0.05O2, NCM90), particularly under harsh operational conditions (4.5 V, 55 °C, and 5 C). Herein, a combined dual-modification strategy integrating Mg2+/Al3+ bulk gradient doping and spinel MgAl2O4 (MA) interfacial coating is proposed to concurrently modulate the structural thermodynamics and interfacial kinetics of NCM90. Electrochemical phase transition tracking (dQ/dV) and kinetic analyses (galvanostatic intermittent titration technique and electrochemical impedance spectroscopy) reveal that the robust Al–O bonds and Mg2+ “pillaring” effect thermodynamically mitigate lattice oxygen loss and alleviate the irreversible H2–H3 phase transition. Simultaneously, the MA coating acts as a robust physical barrier, suppressing the aggressive oxidative decomposition of the electrolyte and minimizing the accumulation of the charge-transfer resistance (Rct). Benefiting from this integrated electrochemical tuning, the dual-modified MA-NCM90 exhibits robust kinetics, retaining 46.8% of its capacity after 300 cycles at 4.5 V and 55 °C (a 17.7% improvement over pristine NCM90, delivering an extra 35.2 mAh g−1), alongside a good fast-charging capability at 5 C. This study elucidates the fundamental mechanism of bulk/interface cooperative engineering in stabilizing the solid–liquid interface and internal phase transitions of Ni-rich cathodes under harsh conditions.
- 3 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (14) , 9155-9168
Combined Bulk-Interfacial Engineering of Ultrahigh-Nickel LiNi 0.9 Co 0.05 Mn 0.05 O 2 to Regulate Electrochemical Kinetics and Phase Reversibility under Harsh Conditions
Severe thermodynamic lattice oxygen evolution and accelerated interfacial parasitic reactions significantly deteriorate the electrochemical reversibility of ultrahigh-Ni cathodes (LiNi0.9Co0.05Mn0.05O2, NCM90), particularly under harsh operational conditions (4.5 V, 55 °C, and 5 C). Herein, a combined dual-modification strategy integrating Mg2+/Al3+ bulk gradient doping and spinel MgAl2O4 (MA) interfacial coating is proposed to concurrently modulate the structural thermodynamics and interfacial kinetics of NCM90. Electrochemical phase transition tracking (dQ/dV) and kinetic analyses (galvanostatic intermittent titration technique and electrochemical impedance spectroscopy) reveal that the robust Al–O bonds and Mg2+ “pillaring” effect thermodynamically mitigate lattice oxygen loss and alleviate the irreversible H2–H3 phase transition. Simultaneously, the MA coating acts as a robust physical barrier, suppressing the aggressive oxidative decomposition of the electrolyte and minimizing the accumulation of the charge-transfer resistance (Rct). Benefiting from this integrated electrochemical tuning, the dual-modified MA-NCM90 exhibits robust kinetics, retaining 46.8% of its capacity after 300 cycles at 4.5 V and 55 °C (a 17.7% improvement over pristine NCM90, delivering an extra 35.2 mAh g−1), alongside a good fast-charging capability at 5 C. This study elucidates the fundamental mechanism of bulk/interface cooperative engineering in stabilizing the solid–liquid interface and internal phase transitions of Ni-rich cathodes under harsh conditions.
- 28 October 2025
- Published by Springer Nature in Ionics
- Vol. 31 (12) , 12653-12667
Radical-oxidation coupled phosphate stabilization strategy: an aqueous and scalable route to mesoporous MnPO4∙H2O precursor for high-performance LiMnPO4 cathodes
- 28 October 2025
- Published by Springer Nature in Ionics
- Vol. 31 (12) , 12653-12667
Radical-oxidation coupled phosphate stabilization strategy: an aqueous and scalable route to mesoporous MnPO4∙H2O precursor for high-performance LiMnPO4 cathodes
Fabrication of a Rigid‐Flexible and Dual‐Conductive Interphase on an Aluminum Current Collector for Ultra‐Stable Anode‐Free Sodium Batteries
Anode‐free sodium batteries (AFSBs) guarantee enhanced energy density and safety; however, their practical applications are hindered by uncontrolled dendritic growth and fragile solid electrolyte interphase formation. Hence, a novel interface engineering strategy is adopted in the present work to construct an in situ 3D porous interphase with dual ion/electron conductive channels on aluminum (Al) foil. The interphase consisting of a fast ion‐conducting sodium aluminate (NaAlO 2 )framework, a highly conductive carbon nanotube network, and a flexible carboxymethyl cellulose binder is fabricated through a simple in situ chemical etching method. The unique architecture of the as‐prepared interface synergistically regulates the sodiophilic nature and the ion/electron flux distribution, dramatically reducing the sodium nucleation overpotential from 35 mV for bare Al to 15 mV, and enabling ultra‐stable sodium plating/stripping in the half cells for over 6000 h at 1 mA cm −2 with a low polarization of 30 mV. When the resultant anode‐free full cell is paired with a sodium vanadium phosphate (Na 3 V 2 (PO 4 ) 3 ) cathode, it yields impressive high‐rate cyclic stability with a retention capacity of 90.7% after 100 cycles at 1 C and a remarkable energy density of 314 Wh kg −1 . This work presents a scalable and effective method for stabilizing anode‐free configurations and offers valuable insights for next‐generation metal‐based battery fabrication.
Fabrication of a Rigid‐Flexible and Dual‐Conductive Interphase on an Aluminum Current Collector for Ultra‐Stable Anode‐Free Sodium Batteries
Anode‐free sodium batteries (AFSBs) guarantee enhanced energy density and safety; however, their practical applications are hindered by uncontrolled dendritic growth and fragile solid electrolyte interphase formation. Hence, a novel interface engineering strategy is adopted in the present work to construct an in situ 3D porous interphase with dual ion/electron conductive channels on aluminum (Al) foil. The interphase consisting of a fast ion‐conducting sodium aluminate (NaAlO 2 )framework, a highly conductive carbon nanotube network, and a flexible carboxymethyl cellulose binder is fabricated through a simple in situ chemical etching method. The unique architecture of the as‐prepared interface synergistically regulates the sodiophilic nature and the ion/electron flux distribution, dramatically reducing the sodium nucleation overpotential from 35 mV for bare Al to 15 mV, and enabling ultra‐stable sodium plating/stripping in the half cells for over 6000 h at 1 mA cm −2 with a low polarization of 30 mV. When the resultant anode‐free full cell is paired with a sodium vanadium phosphate (Na 3 V 2 (PO 4 ) 3 ) cathode, it yields impressive high‐rate cyclic stability with a retention capacity of 90.7% after 100 cycles at 1 C and a remarkable energy density of 314 Wh kg −1 . This work presents a scalable and effective method for stabilizing anode‐free configurations and offers valuable insights for next‐generation metal‐based battery fabrication.
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 70057-70067
The Cathode–Electrolyte Interface Constructed with Antioxidant Ascorbic Acid Guides LNMO to Achieve Stable Cycling Under High Voltage Conditions
LiNi0.5Mn1.5O4 (LNMO) is considered one of the most promising cathode materials for high-energy-density lithium-ion batteries (LIBs). However, free-radical-induced carbonate electrolyte decomposition is a key factor hindering the improvement of battery stability. Inspired by the antioxidative properties of ascorbic acid (AA) in scavenging free radicals, the addition of AA during the electrode fabrication process can effectively terminate free radical chain reactions within the cycling of LNMO. This action prevents severe electrolyte decomposition, thus stabilizing the cathode-electrolyte interface (CEI) and ultimately enhancing battery stability. The results demonstrate that LNMO||Li half-cell with the addition of AA show significantly improved cycling performance after 1000 cycles at 1 C, with a high capacity retention rate of 87.4%, surpassing the 43.6% retention rate achieved by batteries using PVDF alone as a binder. This work introduces an efficient and straightforward strategy for designing functional additives to stabilize phase interfaces, offering an economically efficient choice to enhance the electrochemical performance of the LNMO.
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 70057-70067
The Cathode–Electrolyte Interface Constructed with Antioxidant Ascorbic Acid Guides LNMO to Achieve Stable Cycling Under High Voltage Conditions
LiNi0.5Mn1.5O4 (LNMO) is considered one of the most promising cathode materials for high-energy-density lithium-ion batteries (LIBs). However, free-radical-induced carbonate electrolyte decomposition is a key factor hindering the improvement of battery stability. Inspired by the antioxidative properties of ascorbic acid (AA) in scavenging free radicals, the addition of AA during the electrode fabrication process can effectively terminate free radical chain reactions within the cycling of LNMO. This action prevents severe electrolyte decomposition, thus stabilizing the cathode-electrolyte interface (CEI) and ultimately enhancing battery stability. The results demonstrate that LNMO||Li half-cell with the addition of AA show significantly improved cycling performance after 1000 cycles at 1 C, with a high capacity retention rate of 87.4%, surpassing the 43.6% retention rate achieved by batteries using PVDF alone as a binder. This work introduces an efficient and straightforward strategy for designing functional additives to stabilize phase interfaces, offering an economically efficient choice to enhance the electrochemical performance of the LNMO.
- 12 November 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 627
Enhancement of K storage performance in K3V3-xLax(PO4)4/C cathode materials for potassium-ion batteries via La3+ gradient doping
- 12 November 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 627
Enhancement of K storage performance in K3V3-xLax(PO4)4/C cathode materials for potassium-ion batteries via La3+ gradient doping