Tomasz Staszewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tomasz Staszewski has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Malgorzata Borowko
Department of Theoretical Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, Poland
36 shared publications - S. Sokołowski
Department of Theoretical Chemistry, Maria Curie-Skłodowska University, Lublin 20-614, Gliniana 33, Poland
24 shared publications - Wojciech Rżyskoa
Department of Theoretical Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria-Curie-Sklodowska University in Lublin, Pl. M Curie-Sklodowskiej 3, 20-031 Lublin, Poland
10 shared publications Małgorzata Borówko
Department of Theoretical Chemistry, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, 20-031 Lublin, Poland
5 shared publications- Orest Pizio
Instituto de de Química, Universidad Nacional Autónoma de México, Circuito Exterior, 04510, Cd. Mx., México
2 shared publications A. Patrykiejew
1 shared publication
Latest Publications
- Open Access
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (27) , 6955-6964
The Adsorption Behavior of Surfactants on Hydrophobic Surfaces: Dissipative Particle Dynamics Study
We study the behavior of a model surfactant that mimics sodium dodecyl sulfate (SDS) near a hydrophobic surface. We focus on the surfactant adsorption over a wide range of surfactant concentrations. The obtained adsorption isotherm is consistent with the experimental results. We explore the mechanism of surfactant adsorption on the solid surface and the interplay between the adsorption of surfactants and their aggregation both on the substrate and in the bulk solution. The self-assembly of surfactant molecules is analyzed in detail. We found that adsorption of whole micelles (rather than single molecules) from the solution is the dominant mechanism for surfactant accumulation on surfaces.
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (27) , 6955-6964
Open AccessThe Adsorption Behavior of Surfactants on Hydrophobic Surfaces: Dissipative Particle Dynamics Study
We study the behavior of a model surfactant that mimics sodium dodecyl sulfate (SDS) near a hydrophobic surface. We focus on the surfactant adsorption over a wide range of surfactant concentrations. The obtained adsorption isotherm is consistent with the experimental results. We explore the mechanism of surfactant adsorption on the solid surface and the interplay between the adsorption of surfactants and their aggregation both on the substrate and in the bulk solution. The self-assembly of surfactant molecules is analyzed in detail. We found that adsorption of whole micelles (rather than single molecules) from the solution is the dominant mechanism for surfactant accumulation on surfaces.
- Open Access
- 30 March 2026
- Published by Yukhnovskii Institute for Condensed Matter Physics in Condensed Matter Physics
- Vol. 29 (1) , 13401
Surfactant solutions confined in homogeneous and Janus-like slits
We study the behavior of aqueous surfactant solutions in the bulk phase and in slit-like pores by molecular dynamics. Adsorption and self-assembly of nonionic surfactants C7E3 that mimic alkyl poly(ethylene oxide) molecules are investigated. We consider pores with the same walls and Janus-like slits. The individual walls are inert, hydrophilic, or hydrophobic. We focus on the morphology of the surfactant solution confined in different slits. The influence of a pore type and its width is discussed. The aggregative adsorption of surfactants was found. Our simulations show that in slits surfactants assemble into structures that do not occur in the bulk phases.
- 30 March 2026
- Published by Yukhnovskii Institute for Condensed Matter Physics in Condensed Matter Physics
- Vol. 29 (1) , 13401
Open AccessSurfactant solutions confined in homogeneous and Janus-like slits
We study the behavior of aqueous surfactant solutions in the bulk phase and in slit-like pores by molecular dynamics. Adsorption and self-assembly of nonionic surfactants C7E3 that mimic alkyl poly(ethylene oxide) molecules are investigated. We consider pores with the same walls and Janus-like slits. The individual walls are inert, hydrophilic, or hydrophobic. We focus on the morphology of the surfactant solution confined in different slits. The influence of a pore type and its width is discussed. The aggregative adsorption of surfactants was found. Our simulations show that in slits surfactants assemble into structures that do not occur in the bulk phases.
- Open Access
- 23 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (26) , 6701-6713
Molecular Dynamics Simulations of Oil Detachment from Hydrophobic Surfaces by Using Janus Nanoparticles
Janus particles composed of two parts with different chemical properties can be used for enhanced oil recovery. We investigated the role of Janus dimers in the process of detachment of oil aggregates from hydrophobic solid surfaces using molecular dynamics. Large-scale simulations were performed for different sets of parameters characterizing the system. The effects of interactions between Janus particles and a solid surface and with an oil droplet were considered. We found two main mechanisms of enhanced oil removal: the "kidnaping" of oil aggregates by Janus nanoparticles from the substrate and the competitive adsorption of nanoparticles at the solid surface. In the case of weak affinity of Janus particles with the substrate, the first mechanism dominated, whereas when the affinity was strong, the second mechanism played an important role. We showed how the amphiphilicity of Janus particles and their concentration influence the shape and internal structure of oil aggregates adsorbed on a hydrophobic surface. The high amphiphilicity of Janus particles and their increased concentration promote the process of removing oil from the surface. We analyzed the time evolution of the system after the addition of Janus particles in detail. In the "kidnaping" process, the flat oil aggregate left the surface as a large, sandwich-like aggregate, while the adsorption of Janus particles on the surface caused it to break up into small pieces that left the surface as nearly spherical droplets.
- 23 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (26) , 6701-6713
Open AccessMolecular Dynamics Simulations of Oil Detachment from Hydrophobic Surfaces by Using Janus Nanoparticles
Janus particles composed of two parts with different chemical properties can be used for enhanced oil recovery. We investigated the role of Janus dimers in the process of detachment of oil aggregates from hydrophobic solid surfaces using molecular dynamics. Large-scale simulations were performed for different sets of parameters characterizing the system. The effects of interactions between Janus particles and a solid surface and with an oil droplet were considered. We found two main mechanisms of enhanced oil removal: the "kidnaping" of oil aggregates by Janus nanoparticles from the substrate and the competitive adsorption of nanoparticles at the solid surface. In the case of weak affinity of Janus particles with the substrate, the first mechanism dominated, whereas when the affinity was strong, the second mechanism played an important role. We showed how the amphiphilicity of Janus particles and their concentration influence the shape and internal structure of oil aggregates adsorbed on a hydrophobic surface. The high amphiphilicity of Janus particles and their increased concentration promote the process of removing oil from the surface. We analyzed the time evolution of the system after the addition of Janus particles in detail. In the "kidnaping" process, the flat oil aggregate left the surface as a large, sandwich-like aggregate, while the adsorption of Janus particles on the surface caused it to break up into small pieces that left the surface as nearly spherical droplets.
- Open Access
- 29 October 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (21) , 11627
Attachment and Detachment of Oil Droplets on Solid Surfaces: Insights from Molecular Simulations
The behavior of oil droplets at solid surfaces is a key aspect of oil production and environmental protection. In this paper, the mechanisms of attachment and detachment of oil aggregates are studied via molecular dynamics simulations. The influence of oil–surface interactions on the shape and structure of adsorbed clusters is discussed. Using selected shape metrics, we prove quantitatively that the shape of oil aggregates changes from almost spherical droplets, through multilayer structures, to monolayer films. The oil detachment from solid surfaces plays a major role in enhanced oil recovery. Here, we investigated oil droplet detachment from the solid surface immersed in Janus nanoparticle suspensions. The nanoparticle is modeled as a dimer built of segments that exhibit different affinities to oil and solvent molecules. Our results indicated that the adsorption of Janus dimers on the surface of oil droplets played an essential role in the oil removal processes. Stronger adsorption causes faster detachment of the oil droplet. Based on our findings, suspensions of Janus dimers can be considered to be high-performance agents in removing oil droplets from solid surfaces.
- 29 October 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (21) , 11627
Open AccessAttachment and Detachment of Oil Droplets on Solid Surfaces: Insights from Molecular Simulations
The behavior of oil droplets at solid surfaces is a key aspect of oil production and environmental protection. In this paper, the mechanisms of attachment and detachment of oil aggregates are studied via molecular dynamics simulations. The influence of oil–surface interactions on the shape and structure of adsorbed clusters is discussed. Using selected shape metrics, we prove quantitatively that the shape of oil aggregates changes from almost spherical droplets, through multilayer structures, to monolayer films. The oil detachment from solid surfaces plays a major role in enhanced oil recovery. Here, we investigated oil droplet detachment from the solid surface immersed in Janus nanoparticle suspensions. The nanoparticle is modeled as a dimer built of segments that exhibit different affinities to oil and solvent molecules. Our results indicated that the adsorption of Janus dimers on the surface of oil droplets played an essential role in the oil removal processes. Stronger adsorption causes faster detachment of the oil droplet. Based on our findings, suspensions of Janus dimers can be considered to be high-performance agents in removing oil droplets from solid surfaces.
- Open Access
- 21 April 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (8) , 4550
Molecular Dynamics Simulations of Different Nanoparticles at Substrates
We report the results of large-scale molecular dynamics simulations of adsorption nanoparticles on solid surfaces. The particles were modeled as stiff aggregates of spherical segments. Three types of particles were studied: rods, rectangles, and triangles built of the same number of segments. We show how the particle shape affects the adsorption, the structure of the surface layer, and the degree of the removal of particles from the solvent. The systems with different segment–segment and segment–surface interactions and different concentrations of particles were investigated. The ordered structures formed in adsorption monolayers were also analyzed. The results are consistent with experimental observations.
- 21 April 2024
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 25 (8) , 4550
Open AccessMolecular Dynamics Simulations of Different Nanoparticles at Substrates
We report the results of large-scale molecular dynamics simulations of adsorption nanoparticles on solid surfaces. The particles were modeled as stiff aggregates of spherical segments. Three types of particles were studied: rods, rectangles, and triangles built of the same number of segments. We show how the particle shape affects the adsorption, the structure of the surface layer, and the degree of the removal of particles from the solvent. The systems with different segment–segment and segment–surface interactions and different concentrations of particles were investigated. The ordered structures formed in adsorption monolayers were also analyzed. The results are consistent with experimental observations.
- Open Access
- 28 March 2024
- Published by Yukhnovskii Institute for Condensed Matter Physics in Condensed Matter Physics
- Vol. 27 (1) , 13602
Shape changes of a single hairy particle with mobile ligands at a liquid-liquid interface
We investigate rearrangements of a single hairy particle at a liquid-liquid interface using coarse-grained molecular dynamics simulations. We consider the particles with the same (symmetrical interactions) and different (asymmetrical interactions) affinity to the liquids. We show how ligand mobility affects the behavior of the hairy particle at the liquid-liquid interface. We found that such a hairy particle can take various shapes at the interface. For example, a Janus-like snowman consisting of a segment cluster and a bare part of the core, Saturn-like structures, and the core with a wide “plume” on one side. A configuration of the particle at the interface is characterized by the vertical displacement distance and the orientation of the particle relative to the phase boundary. The selected descriptors are used to characterize the shape of the segment cloud. We found that the shape of a particle and its localization at the interface can be determined by tuning the interactions with the liquids.
- 28 March 2024
- Published by Yukhnovskii Institute for Condensed Matter Physics in Condensed Matter Physics
- Vol. 27 (1) , 13602
Open AccessShape changes of a single hairy particle with mobile ligands at a liquid-liquid interface
We investigate rearrangements of a single hairy particle at a liquid-liquid interface using coarse-grained molecular dynamics simulations. We consider the particles with the same (symmetrical interactions) and different (asymmetrical interactions) affinity to the liquids. We show how ligand mobility affects the behavior of the hairy particle at the liquid-liquid interface. We found that such a hairy particle can take various shapes at the interface. For example, a Janus-like snowman consisting of a segment cluster and a bare part of the core, Saturn-like structures, and the core with a wide “plume” on one side. A configuration of the particle at the interface is characterized by the vertical displacement distance and the orientation of the particle relative to the phase boundary. The selected descriptors are used to characterize the shape of the segment cloud. We found that the shape of a particle and its localization at the interface can be determined by tuning the interactions with the liquids.
- Open Access
- 29 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (22) , 5150-5161
Janus Ligand-Tethered Nanoparticles at Liquid–Liquid Interfaces
We investigate the structural properties of Janus ligand-tethered nanoparticles at liquid-liquid interfaces using coarse-grained molecular dynamics simulations. The effect of interactions between different chains and liquids is discussed. We consider the Janus particles with symmetrical interactions with the liquids which correspond to supplementary wettability and particles with uncorrelated interactions. Simulation results indicate that the Janus hairy particles trapped in the interface region have different configurations characterized by the vertical displacement distance, the orientation of the Janus line relative to the interface, and the particle shape. The Janus hairy particles present abundant morphologies, including dumbbell-like and typical core-shell, at the interface. The shape of adsorbed particles is analyzed in detail. The simulation data are compared with those predicted by a simple phenomenological approach. This work can promote the applications of Janus hairy particles in nanotechnology.
- 29 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (22) , 5150-5161
Open AccessJanus Ligand-Tethered Nanoparticles at Liquid–Liquid Interfaces
We investigate the structural properties of Janus ligand-tethered nanoparticles at liquid-liquid interfaces using coarse-grained molecular dynamics simulations. The effect of interactions between different chains and liquids is discussed. We consider the Janus particles with symmetrical interactions with the liquids which correspond to supplementary wettability and particles with uncorrelated interactions. Simulation results indicate that the Janus hairy particles trapped in the interface region have different configurations characterized by the vertical displacement distance, the orientation of the Janus line relative to the interface, and the particle shape. The Janus hairy particles present abundant morphologies, including dumbbell-like and typical core-shell, at the interface. The shape of adsorbed particles is analyzed in detail. The simulation data are compared with those predicted by a simple phenomenological approach. This work can promote the applications of Janus hairy particles in nanotechnology.
- Open Access
- 26 February 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (5) , 4564
Hybrid Nanoparticles at Fluid–Fluid Interfaces: Insight from Theory and Simulation
Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid–fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.
- 26 February 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (5) , 4564
Open AccessHybrid Nanoparticles at Fluid–Fluid Interfaces: Insight from Theory and Simulation
Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid–fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.
- Open Access
- 18 July 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (14) , 7919
Shape Transformations and Self-Assembly of Hairy Particles under Confinement
Molecular dynamics simulations are used to investigate the behavior of polymer-tethered nanoparticles between two inert or attractive walls. The confinement in pores creates new possibilities for controlling the shape transformation of individual hairy particles and their self-organization. We introduce a minimalistic model of the system; only chain-wall interactions are assumed to be attractive, while the others are softly repulsive. We show how the shape of isolated particles can be controlled by changing the wall separation and the strength of the interaction with the surfaces. For attractive walls, we found two types of structures, “bridges” and “mounds”. The first structures are similar to flanged spools in which the chains are connected with both walls and form bridges between them. We observed various bridges, symmetrical and asymmetrical spools, hourglasses, and pillars. The bridge-like structures can be “nano-oscillators” in which the cores jump from one wall to the other. We also study the self-assembly of a dense fluid of hairy particles in slit-like pores and analyze how the system morphology depends on interactions with the surfaces and the wall separation. The hairy particles form layers parallel to the walls. Different ordered structures, resembling two-dimensional crystalline lattices, are reported. We demonstrate that hairy particles are a versatile soft component forming a variety of structures in the slits.
- 18 July 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (14) , 7919
Open AccessShape Transformations and Self-Assembly of Hairy Particles under Confinement
Molecular dynamics simulations are used to investigate the behavior of polymer-tethered nanoparticles between two inert or attractive walls. The confinement in pores creates new possibilities for controlling the shape transformation of individual hairy particles and their self-organization. We introduce a minimalistic model of the system; only chain-wall interactions are assumed to be attractive, while the others are softly repulsive. We show how the shape of isolated particles can be controlled by changing the wall separation and the strength of the interaction with the surfaces. For attractive walls, we found two types of structures, “bridges” and “mounds”. The first structures are similar to flanged spools in which the chains are connected with both walls and form bridges between them. We observed various bridges, symmetrical and asymmetrical spools, hourglasses, and pillars. The bridge-like structures can be “nano-oscillators” in which the cores jump from one wall to the other. We also study the self-assembly of a dense fluid of hairy particles in slit-like pores and analyze how the system morphology depends on interactions with the surfaces and the wall separation. The hairy particles form layers parallel to the walls. Different ordered structures, resembling two-dimensional crystalline lattices, are reported. We demonstrate that hairy particles are a versatile soft component forming a variety of structures in the slits.
- Open Access
- 3 February 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (6) , 1341-1351
Adsorption of Polymer-Tethered Particles on Solid Surfaces
We explore the behavior of polymer-tethered particles on solid surfaces using coarse-grained molecular dynamics simulations. Segment–segment, segment–core, and core–core interactions are assumed to be purely repulsive, while the segment–substrate interactions are attractive. We analyze changes in the internal structure of single hairy particles on the surfaces with the increasing strength of the segment–substrate interactions. For this purpose, we calculate the density profiles along the x, y, z axes and the mass dipole moments. The adsorbed hairy particles are found to be symmetrical in a plane parallel to the substrate but strongly asymmetric in the vertical direction. On stronger adsorbents, the particle canopies become flattened and the cores lie closer to the wall. We consider the adsorption of hairy nanoparticles dispersed in systems of different initial particle densities. We show how the strength of segment–substrate interactions affects the structure of the adsorbed phase, the particle–wall potential of the average force, the excess adsorption isotherms, and the real adsorption isotherms.
- 3 February 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 126 (6) , 1341-1351
Open AccessAdsorption of Polymer-Tethered Particles on Solid Surfaces
We explore the behavior of polymer-tethered particles on solid surfaces using coarse-grained molecular dynamics simulations. Segment–segment, segment–core, and core–core interactions are assumed to be purely repulsive, while the segment–substrate interactions are attractive. We analyze changes in the internal structure of single hairy particles on the surfaces with the increasing strength of the segment–substrate interactions. For this purpose, we calculate the density profiles along the x, y, z axes and the mass dipole moments. The adsorbed hairy particles are found to be symmetrical in a plane parallel to the substrate but strongly asymmetric in the vertical direction. On stronger adsorbents, the particle canopies become flattened and the cores lie closer to the wall. We consider the adsorption of hairy nanoparticles dispersed in systems of different initial particle densities. We show how the strength of segment–substrate interactions affects the structure of the adsorbed phase, the particle–wall potential of the average force, the excess adsorption isotherms, and the real adsorption isotherms.