Jae-Seung Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jae-Seung Lee has a total of 453 co-authors. Here are the top co-authors by number of shared publications:
- Alexej Jerschow
Department of Chemistry, New York University, New York, NY, USA
20 shared publications - Ravinder Reddy Regatte
Department of Radiology New York University Grossman School of Medicine New York New York USA
16 shared publications A. K. Khitrin
Kent State University Department of Chemistry Kent, Ohio 44242-0001, USA
12 shared publications- Sang Do Lee
Department of Pulmonary and Critical Care Medicine, Asan Medical Center, University of Ulsan College of Medicine, Seoul 05505, Korea
7 shared publications - Yeon-Mok Oh
Department of Pulmonary and Critical Care Medicine Asan Medical Center University of Ulsan College of Medicine Seoul Korea
7 shared publications Jaehyun Kim
Department of Physics, Korea Advanced Institute of Science and Technology, 305-701, Daejeon, South Korea
6 shared publications
Latest Publications
- 6 May 2019
- Published by Wiley in NMR in Biomedicine
- Vol. 32 (7) , e4097
Magnetization transfer in liposome and proteoliposome samples that mimic the protein and lipid composition of myelin
Although magnetization transfer (MT) has been widely used in brain MRI, for example in brain inflammation and multiple sclerosis, the detailed molecular origin of MT effects and the role that proteins play in MT remain unclear. In this work, a proteoliposome model system was used to mimic the myelin environment and to examine the roles of protein, cholesterol, brain cerebrosides, and sphingomyelin embedded in the liposome matrix. Exchange parameters were determined using a double‐quantum filter experiment. The goal was to determine the relative contributions to exchange and MT of cerebrosides, sphingomyelin, cholesterol, and proteins in 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphocholine bilayers. The main finding was that cerebrosides produced the strongest exchange effects, and that these were even more pronounced than those found for proteins. Sphingomyelin (which also has exchangeable groups at the head of the fatty acid chains, albeit closer to the lipid acyl chains) and cholesterol showed only minimal transfer. Overall, the extracted exchange rates appeared much smaller than commonly assumed for ‐OH and ‐NH groups.
- 6 May 2019
- Published by Wiley in NMR in Biomedicine
- Vol. 32 (7) , e4097
Magnetization transfer in liposome and proteoliposome samples that mimic the protein and lipid composition of myelin
Although magnetization transfer (MT) has been widely used in brain MRI, for example in brain inflammation and multiple sclerosis, the detailed molecular origin of MT effects and the role that proteins play in MT remain unclear. In this work, a proteoliposome model system was used to mimic the myelin environment and to examine the roles of protein, cholesterol, brain cerebrosides, and sphingomyelin embedded in the liposome matrix. Exchange parameters were determined using a double‐quantum filter experiment. The goal was to determine the relative contributions to exchange and MT of cerebrosides, sphingomyelin, cholesterol, and proteins in 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphocholine bilayers. The main finding was that cerebrosides produced the strongest exchange effects, and that these were even more pronounced than those found for proteins. Sphingomyelin (which also has exchangeable groups at the head of the fatty acid chains, albeit closer to the lipid acyl chains) and cholesterol showed only minimal transfer. Overall, the extracted exchange rates appeared much smaller than commonly assumed for ‐OH and ‐NH groups.
- Open Access
- 27 August 2018
- Published by American Chemical Society (ACS) in ChemRxiv
The Role of the Chemical Shift Difference in a Two-Site Exchange Model Under an On-Resonance Spin-Lock RF Field
The manuscript investigates the role of the chemical shift difference between two exchanging pools under a spin-lock RF field. The results demonstrate that the width of the dispersion of R1rho is determined mainly by the chemical shift difference when the exchange is slow. This work may give a new insight into the spin dynamics under a spin-lock condition and the results may be relevant to the fields using the spin-lock technique, such as protein NMR and MRI contrast.
- 27 August 2018
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe Role of the Chemical Shift Difference in a Two-Site Exchange Model Under an On-Resonance Spin-Lock RF Field
The manuscript investigates the role of the chemical shift difference between two exchanging pools under a spin-lock RF field. The results demonstrate that the width of the dispersion of R1rho is determined mainly by the chemical shift difference when the exchange is slow. This work may give a new insight into the spin dynamics under a spin-lock condition and the results may be relevant to the fields using the spin-lock technique, such as protein NMR and MRI contrast.
- 31 May 2018
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 81 (1) , 573-582
Assessment of frequency drift on CEST MRI and dynamic correction: application to gagCEST at 7 T
Purpose: To investigate the effect of a frequency drift of the static magnetic field on 3D CEST MRI based on glycosaminoglycans (GAGs) of articular cartilage at 7 T and to introduce a retrospective correction method that uses the phase images of the gradient‐echo readout.Methods: Repeated gagCEST and B0 measurements were performed in a glucose model solution and in vivo in the knee joint of 3 healthy volunteers at 7 T. Phase images of the modified 3D rectangular spiral centric–reordered gradient‐echo CEST sequence were used to quantify and compensate the apparent frequency drift in repeated gagCEST measurements.Results: The frequency drift of the MRI scanner strongly influences the gagCEST signal in the articular cartilage of the human knee joint. The gagCEST signal in the articular cartilage is changed by 0.18%/Hz while an average drift of 0.7 ± 0.2 Hz/minute was observed. The proposed correction method can be applied retrospectively without the need of additional measurements and provides improved comparability and reproducibility for gagCEST studies. This correction method may also be of interest for other applications of CEST MRI.Conclusion: Prospective or retrospective correction of the frequency drift of the MRI scanner is essential for reproducible gagCEST measurements. The proposed retrospective correction method fulfills this requirement without the need of additional measurements.
- 31 May 2018
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 81 (1) , 573-582
Assessment of frequency drift on CEST MRI and dynamic correction: application to gagCEST at 7 T
Purpose: To investigate the effect of a frequency drift of the static magnetic field on 3D CEST MRI based on glycosaminoglycans (GAGs) of articular cartilage at 7 T and to introduce a retrospective correction method that uses the phase images of the gradient‐echo readout.Methods: Repeated gagCEST and B0 measurements were performed in a glucose model solution and in vivo in the knee joint of 3 healthy volunteers at 7 T. Phase images of the modified 3D rectangular spiral centric–reordered gradient‐echo CEST sequence were used to quantify and compensate the apparent frequency drift in repeated gagCEST measurements.Results: The frequency drift of the MRI scanner strongly influences the gagCEST signal in the articular cartilage of the human knee joint. The gagCEST signal in the articular cartilage is changed by 0.18%/Hz while an average drift of 0.7 ± 0.2 Hz/minute was observed. The proposed correction method can be applied retrospectively without the need of additional measurements and provides improved comparability and reproducibility for gagCEST studies. This correction method may also be of interest for other applications of CEST MRI.Conclusion: Prospective or retrospective correction of the frequency drift of the MRI scanner is essential for reproducible gagCEST measurements. The proposed retrospective correction method fulfills this requirement without the need of additional measurements.
- 19 December 2017
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 80 (2) , 641-647
Quadrupolar jump‐and‐return pulse sequence for fluid‐suppressed sodium MRI of the knee joint at 7T
Purpose: To demonstrate the feasibility of the so‐called quadrupolar jump‐and‐return (QJR) pulse sequence by assessing its performance on the contrast modification to knee cartilage and quality of fluid suppression in the knee joint in vivo at 7T.Methods: The right knee joints of five healthy volunteers (3 males: mean age = 32.4 ± 1.3 years; 2 females: mean age = 27.9 ± 1.0 years; mean age = 30.6 ± 2.7 years) were scanned on a 7T scanner with variation of the delay in the QJR sequence from 1 ms to 5 ms. For one healthy volunteer, the QJR scan with the delay of 3 ms and the inversion‐recovery (IR) scan were performed. Numerical simulations were conducted to evaluate the effects of B0‐ and B1‐field inhomogeneities and residual quadrupolar couplings on fluid suppression and tissue contrast, respectively.Results: The QJR sequence suppressed the fluid signal from the artery and produced the contrast of knee cartilage in vivo. Its performance was comparable to that of the conventional IR sequence. Numerical simulations suggested that the fluid suppression may not be affected much by field inhomogeneities but that a distribution of residual quadrupolar couplings and weak RF pulses may interfere with the clear interpretation of cartilage contrast.Conclusion: This preliminary work demonstrated that the QJR pulse sequence produces contrast for knee cartilage while suppressing the fluid signal from the artery. The knee cartilage contrast and quality of fluid suppression obtained from the QJR sequence were comparable to those of the IR sequence. Magn Reson Med 80:641–647, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
- 19 December 2017
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 80 (2) , 641-647
Quadrupolar jump‐and‐return pulse sequence for fluid‐suppressed sodium MRI of the knee joint at 7T
Purpose: To demonstrate the feasibility of the so‐called quadrupolar jump‐and‐return (QJR) pulse sequence by assessing its performance on the contrast modification to knee cartilage and quality of fluid suppression in the knee joint in vivo at 7T.Methods: The right knee joints of five healthy volunteers (3 males: mean age = 32.4 ± 1.3 years; 2 females: mean age = 27.9 ± 1.0 years; mean age = 30.6 ± 2.7 years) were scanned on a 7T scanner with variation of the delay in the QJR sequence from 1 ms to 5 ms. For one healthy volunteer, the QJR scan with the delay of 3 ms and the inversion‐recovery (IR) scan were performed. Numerical simulations were conducted to evaluate the effects of B0‐ and B1‐field inhomogeneities and residual quadrupolar couplings on fluid suppression and tissue contrast, respectively.Results: The QJR sequence suppressed the fluid signal from the artery and produced the contrast of knee cartilage in vivo. Its performance was comparable to that of the conventional IR sequence. Numerical simulations suggested that the fluid suppression may not be affected much by field inhomogeneities but that a distribution of residual quadrupolar couplings and weak RF pulses may interfere with the clear interpretation of cartilage contrast.Conclusion: This preliminary work demonstrated that the QJR pulse sequence produces contrast for knee cartilage while suppressing the fluid signal from the artery. The knee cartilage contrast and quality of fluid suppression obtained from the QJR sequence were comparable to those of the IR sequence. Magn Reson Med 80:641–647, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
- 30 November 2017
- Published by Journal of Advanced Marine Engineering and Technology in Journal of Advanced Marine Engineering and Technology
- Vol. 41 (9) , 943-951
Development of technology for collecting data regarding fuel consumption and greenhouse gas emissions by existing ships for MRV regulation
논문에서는 실연비데이터보고제도 대응을 위한 지원 시스템의 주요 기능 중 연료소모량과 온실가스 배출량 데이터 수집을 위한 데이터 수집 시스템을 개발하고 해사위성통신과 선박환경에서 시스템 성능 검증을 수행하였다. 데이터 수집 시스템은 선박에 설치된 주요 장비를 연동하여 배출량 데이터를 수집하는 자동보고 모듈과 선박에서 육상으로 보고되는 이메일 내용 또는 첨부파일을 통해 배출량 데이터를 수집하는 매뉴얼 모듈로 구성하였으며, 배출량 데이터 수집 방법에 따라 사용자가 선택할 수 있도록 시스템을 구현하였다. 개발된 데이터 수집 시스템을 해사위성통신 환경에서 시험한 결과 전 해역에서 데이터 통신이 가능하며 데이터 수집 시스템의 운용기능이 정상적으로 동작함을 확인하였다. 또한 해사위성환경에서 이메일 및 첨부파일을 통한 배출량 데이터 수집 성능 시험 결과 96.8%의 데이터가 일치하여 실연비데이터보고제도의 데이터 정확성 요구사항이 만족함을 확인하였다.
- 30 November 2017
- Published by Journal of Advanced Marine Engineering and Technology in Journal of Advanced Marine Engineering and Technology
- Vol. 41 (9) , 943-951
Development of technology for collecting data regarding fuel consumption and greenhouse gas emissions by existing ships for MRV regulation
논문에서는 실연비데이터보고제도 대응을 위한 지원 시스템의 주요 기능 중 연료소모량과 온실가스 배출량 데이터 수집을 위한 데이터 수집 시스템을 개발하고 해사위성통신과 선박환경에서 시스템 성능 검증을 수행하였다. 데이터 수집 시스템은 선박에 설치된 주요 장비를 연동하여 배출량 데이터를 수집하는 자동보고 모듈과 선박에서 육상으로 보고되는 이메일 내용 또는 첨부파일을 통해 배출량 데이터를 수집하는 매뉴얼 모듈로 구성하였으며, 배출량 데이터 수집 방법에 따라 사용자가 선택할 수 있도록 시스템을 구현하였다. 개발된 데이터 수집 시스템을 해사위성통신 환경에서 시험한 결과 전 해역에서 데이터 통신이 가능하며 데이터 수집 시스템의 운용기능이 정상적으로 동작함을 확인하였다. 또한 해사위성환경에서 이메일 및 첨부파일을 통한 배출량 데이터 수집 성능 시험 결과 96.8%의 데이터가 일치하여 실연비데이터보고제도의 데이터 정확성 요구사항이 만족함을 확인하였다.
- 20 November 2017
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 80 (1) , 413-419
Synthesized tissue‐equivalent dielectric phantoms using salt and polyvinylpyrrolidone solutions
Purpose: To explore the use of polyvinylpyrrolidone (PVP) for simulated materials with tissue‐equivalent dielectric properties.Methods: PVP and salt were used to control, respectively, relative permittivity and electrical conductivity in a collection of 63 samples with a range of solute concentrations. Their dielectric properties were measured with a commercial probe and fitted to a 3D polynomial in order to establish an empirical recipe. The material's thermal properties and MR spectra were measured.Results: The empirical polynomial recipe (available at https://www.amri.ninds.nih.gov/cgi-bin/phantomrecipe) provides the PVP and salt concentrations required for dielectric materials with permittivity and electrical conductivity values between approximately 45 and 78, and 0.1 to 2 siemens per meter, respectively, from 50 MHz to 4.5 GHz. The second‐ (solute concentrations) and seventh‐ (frequency) order polynomial recipe provided less than 2.5% relative error between the measured and target properties. PVP side peaks in the spectra were minor and unaffected by temperature changes.Conclusion: PVP‐based phantoms are easy to prepare and nontoxic, and their semitransparency makes air bubbles easy to identify. The polymer can be used to create simulated material with a range of dielectric properties, negligible spectral side peaks, and long T2 relaxation time, which are favorable in many MR applications. Magn Reson Med 80:413–419, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
- 20 November 2017
- Published by Wiley in Magnetic Resonance in Medicine
- Vol. 80 (1) , 413-419
Synthesized tissue‐equivalent dielectric phantoms using salt and polyvinylpyrrolidone solutions
Purpose: To explore the use of polyvinylpyrrolidone (PVP) for simulated materials with tissue‐equivalent dielectric properties.Methods: PVP and salt were used to control, respectively, relative permittivity and electrical conductivity in a collection of 63 samples with a range of solute concentrations. Their dielectric properties were measured with a commercial probe and fitted to a 3D polynomial in order to establish an empirical recipe. The material's thermal properties and MR spectra were measured.Results: The empirical polynomial recipe (available at https://www.amri.ninds.nih.gov/cgi-bin/phantomrecipe) provides the PVP and salt concentrations required for dielectric materials with permittivity and electrical conductivity values between approximately 45 and 78, and 0.1 to 2 siemens per meter, respectively, from 50 MHz to 4.5 GHz. The second‐ (solute concentrations) and seventh‐ (frequency) order polynomial recipe provided less than 2.5% relative error between the measured and target properties. PVP side peaks in the spectra were minor and unaffected by temperature changes.Conclusion: PVP‐based phantoms are easy to prepare and nontoxic, and their semitransparency makes air bubbles easy to identify. The polymer can be used to create simulated material with a range of dielectric properties, negligible spectral side peaks, and long T2 relaxation time, which are favorable in many MR applications. Magn Reson Med 80:413–419, 2018. © 2017 International Society for Magnetic Resonance in Medicine.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5704-5711
Bidirectional DC-DC converter utilizing magnetic and capacitive power transfer — 97.1% Efficiency at 1.2-MHz switching
A high-performance DC-DC converter is presented to improve the efficiency and modularity of the vehicular power system. The converter is capable of bidirectional power transfer between the isolated voltage sources. GaN semiconductor switches in the converter turn on and off softly by utilizing the energy stored in the leakage inductance of a transformer. A quasi-resonant operation is also explained which is suitable for low-power condition. The switches turn on at the valley of the drain-source waveform to secure soft switching. A 180-W prototype hardware was fabricated with a 63 mm × 31 mm printed circuit board (PCB) and 200-V GaN FET devices. Peak efficiency was 97.1% at 24-V/155-W output voltage/power and 1.2-MHz switching frequency. Another prototype converter demonstrated the quasi-resonant operation at 25-V/46.8-W output and 914-kHz switching frequency.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5704-5711
Bidirectional DC-DC converter utilizing magnetic and capacitive power transfer — 97.1% Efficiency at 1.2-MHz switching
A high-performance DC-DC converter is presented to improve the efficiency and modularity of the vehicular power system. The converter is capable of bidirectional power transfer between the isolated voltage sources. GaN semiconductor switches in the converter turn on and off softly by utilizing the energy stored in the leakage inductance of a transformer. A quasi-resonant operation is also explained which is suitable for low-power condition. The switches turn on at the valley of the drain-source waveform to secure soft switching. A 180-W prototype hardware was fabricated with a 63 mm × 31 mm printed circuit board (PCB) and 200-V GaN FET devices. Peak efficiency was 97.1% at 24-V/155-W output voltage/power and 1.2-MHz switching frequency. Another prototype converter demonstrated the quasi-resonant operation at 25-V/46.8-W output and 914-kHz switching frequency.
- 28 September 2017
- Published by Korean Society of Pediatric Nephrology in Childhood Kidney Diseases
- Vol. 21 (2) , 81-88
Therapeutic Plasma Exchange in Pediatric Kidney Disease: 23-year Experience at the Severance Children’s Hospital in Korea
- 28 September 2017
- Published by Korean Society of Pediatric Nephrology in Childhood Kidney Diseases
- Vol. 21 (2) , 81-88
Therapeutic Plasma Exchange in Pediatric Kidney Disease: 23-year Experience at the Severance Children’s Hospital in Korea
- 1 August 2017
- Published by Elsevier in Journal of Magnetic Resonance
- Vol. 281, 141-150
Magnetization transfer in a partly deuterated lyotropic liquid crystal by single- and dual-frequency RF irradiations
- 1 August 2017
- Published by Elsevier in Journal of Magnetic Resonance
- Vol. 281, 141-150
Magnetization transfer in a partly deuterated lyotropic liquid crystal by single- and dual-frequency RF irradiations
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 003836-003841
Management of technologies for electric vehicle efficiency towards optimizing range
With the demand and supply for electric vehicles (EVs) in rapid growth at a global scale, due to factors such as environmental awareness, tax and monetary incentives, government regulations, and technological advances, a range of technical issues in efficient EV design has been gaining great attention. With consumer concerns around EV range and battery degradation, several initiatives have been investigating technologies which could further address the above issues. Recognizing the need for increasing the driving range and decreasing the impact of scenarios that negatively affect it as prime design issues, one of the resulting areas of interest is to explore options on better managing energy for heating, ventilation and the air conditioning (HVAC) system, which can decrease the range of EVs by as much as 30% when in use. With key driver for identifying the most promising ideas and technologies worth extensive investigations, the objective is to develop a methodology for managing the selection of technologies during conceptual design, through assessing HVAC power demand effects and employing advanced energy management techniques. A methodology for identifying emerging technology concepts has been outlined and demonstrated in the context of a virtual electric vehicle system. As a result, MOTEVETOR, a portable, interactive multi-criteria decision making tool has been created which allows for performing trades between vehicle configurations carrying different technology packages, as part of supporting EV conceptual design.
- 9 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 003836-003841
Management of technologies for electric vehicle efficiency towards optimizing range
With the demand and supply for electric vehicles (EVs) in rapid growth at a global scale, due to factors such as environmental awareness, tax and monetary incentives, government regulations, and technological advances, a range of technical issues in efficient EV design has been gaining great attention. With consumer concerns around EV range and battery degradation, several initiatives have been investigating technologies which could further address the above issues. Recognizing the need for increasing the driving range and decreasing the impact of scenarios that negatively affect it as prime design issues, one of the resulting areas of interest is to explore options on better managing energy for heating, ventilation and the air conditioning (HVAC) system, which can decrease the range of EVs by as much as 30% when in use. With key driver for identifying the most promising ideas and technologies worth extensive investigations, the objective is to develop a methodology for managing the selection of technologies during conceptual design, through assessing HVAC power demand effects and employing advanced energy management techniques. A methodology for identifying emerging technology concepts has been outlined and demonstrated in the context of a virtual electric vehicle system. As a result, MOTEVETOR, a portable, interactive multi-criteria decision making tool has been created which allows for performing trades between vehicle configurations carrying different technology packages, as part of supporting EV conceptual design.