River Tin-Ho Li
Research Subjects
Research Interests
River Tin-Ho Li has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Carl Ngai Man Ho
Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB, Canada
4 shared publications - Ken King Man Siu
Department of Electrical Engineering, University of North Texas, Denton, TX, USA
3 shared publications Eric-Xu Chen
Jilin University, Changchun, China
1 shared publication- Henry Shu-Hung Chung
City University of Hong Kong
1 shared publication - Jalal Dadkhah
RIGA Lab, Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB, Canada
1 shared publication Max Chen
Hong Kong Applied Science Research Institute (ASTRI),Department of Smart Power Electronic Systems,Hong Kong SAR,China
1 shared publication
Latest Publications
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 1241-1252
A Design of Cost-Efficient Solid-State Circuit Breaker for LVDC Grid Applications
A naturally cooled direct current (dc) solid-state circuit breaker (SSCB) is proposed for residential and commercial dc buildings applications, where cost, acoustic noise, and energy efficiency are critical concerns. By using the matrix connected low voltage mosfets to handle the main current, the proposed SSCB achieved 99.90%+ efficiency from 25% load and retained the ultrafast circuit breaking performance. Design is optimized between BoM cost, efficiency, thermal performance, and current interruption capability. Performance of the proposed SSCB has been evaluated analytically. Experimental verification was performed on a 400 V dc / 40A prototype.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 1241-1252
A Design of Cost-Efficient Solid-State Circuit Breaker for LVDC Grid Applications
A naturally cooled direct current (dc) solid-state circuit breaker (SSCB) is proposed for residential and commercial dc buildings applications, where cost, acoustic noise, and energy efficiency are critical concerns. By using the matrix connected low voltage mosfets to handle the main current, the proposed SSCB achieved 99.90%+ efficiency from 25% load and retained the ultrafast circuit breaking performance. Design is optimized between BoM cost, efficiency, thermal performance, and current interruption capability. Performance of the proposed SSCB has been evaluated analytically. Experimental verification was performed on a 400 V dc / 40A prototype.
- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 617-622
Novel Plug-Socket DC Connector Based on Solid-State Switch for DC Building Applications
This paper proposes a novel plug-socket connector for DC power applications. Two slots are uniquely designed for the socket contact pins so that the positive and negative conductors are separated into two parts including main and auxiliary contacts, respectively. The conductors of the socket are shorted by the plug pins when transferring DC power. During the plug-out process, the DC current is channeled to the solid-state switch automatically before the switch is turned off instantly to stop the DC current. No electric arc is induced. Additionally, when no plug is inserted into the socket the auxiliary supply is physically disconnected from the bus voltage $(V_{\text{dc}})$ due to the galvanic isolation of the two slots. Thus, no standby power is needed when the socket is not in use. Experimental results are given to verify the proposed socket-plug connector in achieving full-load (400 V, 10 A) disconnection arc-lessly.- 10 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 617-622
Novel Plug-Socket DC Connector Based on Solid-State Switch for DC Building Applications
This paper proposes a novel plug-socket connector for DC power applications. Two slots are uniquely designed for the socket contact pins so that the positive and negative conductors are separated into two parts including main and auxiliary contacts, respectively. The conductors of the socket are shorted by the plug pins when transferring DC power. During the plug-out process, the DC current is channeled to the solid-state switch automatically before the switch is turned off instantly to stop the DC current. No electric arc is induced. Additionally, when no plug is inserted into the socket the auxiliary supply is physically disconnected from the bus voltage $(V_{\text{dc}})$ due to the galvanic isolation of the two slots. Thus, no standby power is needed when the socket is not in use. Experimental results are given to verify the proposed socket-plug connector in achieving full-load (400 V, 10 A) disconnection arc-lessly.- 7 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (12) , 14926-14943
Magnetic Components Reduction in a Three-Phase PFC Converter by Using a Reconfigurable LCL Filter
Three-phase power factor correction (PFC) converters are the front-end stage of the power conversion that are required to be connected to the grid with a proper filter to meet international standards. A high-order LCL filter is a widely used solution to reduce the component size of the filter although it requires six inductors. In this article, a novel reconfigurable LCL filter that consists of only three inductors is proposed. The principle of the reconfigurable filter is to fully utilize the converter-side inductors by changing their position from the converter side to the grid side and vice versa. The filter is reconfigured by using three low-frequency (LF) bidirectional switches. The ultimate goal of the proposed topology is to reduce the magnetic components by half and achieve comparable grid current quality as the conventional topology. The proposed PFC topology is verified by a 1-kW experimental prototype. All the experimental results agree with the theoretical concepts and prove that the grid current quality of the proposed topology is comparable with the conventional topology.
- 7 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (12) , 14926-14943
Magnetic Components Reduction in a Three-Phase PFC Converter by Using a Reconfigurable LCL Filter
Three-phase power factor correction (PFC) converters are the front-end stage of the power conversion that are required to be connected to the grid with a proper filter to meet international standards. A high-order LCL filter is a widely used solution to reduce the component size of the filter although it requires six inductors. In this article, a novel reconfigurable LCL filter that consists of only three inductors is proposed. The principle of the reconfigurable filter is to fully utilize the converter-side inductors by changing their position from the converter side to the grid side and vice versa. The filter is reconfigured by using three low-frequency (LF) bidirectional switches. The ultimate goal of the proposed topology is to reduce the magnetic components by half and achieve comparable grid current quality as the conventional topology. The proposed PFC topology is verified by a 1-kW experimental prototype. All the experimental results agree with the theoretical concepts and prove that the grid current quality of the proposed topology is comparable with the conventional topology.
- 13 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (3) , 1899-1909
A Four-Quadrant Single-Phase Grid-Connected Converter With Only Two High-Frequency Switches
- 13 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (3) , 1899-1909
A Four-Quadrant Single-Phase Grid-Connected Converter With Only Two High-Frequency Switches
- 13 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (4) , 3921-3936
Advanced Digital Controller for Improving Input Current Quality of Integrated Active Virtual Ground-Bridgeless PFC
The paper presents a new digital control scheme for Active Virtual Ground-Bridgeless PFC (AVG-BPFC) which is able to obtain an optimized solution between the system efficiency and Electromagnetic Interference (EMI) performance in the PFC stage. However, a resonant characteristic is generating from the input LCL filter structure of the converter. In addition, there is a phase difference between two inductor currents which also leads the controller design in the AVG-BPFC to become challenging, especially on the system stability and the current quality. Thus, a triple loop control's architecture together with an integrated state machine is proposed as the control methodology of the AVG-BPFC. Under the simple control structure in the digital platform, a stable system is achieved together with a precise grid current tracking function. Such control scheme was implemented digitally on a 1.5 kW prototype. In the paper, theoretical models of the whole system were analysed and the system performance was successfully verified in both steady state and transient state conditions. The experimental results showed a good agreement with the theoretical knowledge.
- 13 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (4) , 3921-3936
Advanced Digital Controller for Improving Input Current Quality of Integrated Active Virtual Ground-Bridgeless PFC
The paper presents a new digital control scheme for Active Virtual Ground-Bridgeless PFC (AVG-BPFC) which is able to obtain an optimized solution between the system efficiency and Electromagnetic Interference (EMI) performance in the PFC stage. However, a resonant characteristic is generating from the input LCL filter structure of the converter. In addition, there is a phase difference between two inductor currents which also leads the controller design in the AVG-BPFC to become challenging, especially on the system stability and the current quality. Thus, a triple loop control's architecture together with an integrated state machine is proposed as the control methodology of the AVG-BPFC. Under the simple control structure in the digital platform, a stable system is achieved together with a precise grid current tracking function. Such control scheme was implemented digitally on a 1.5 kW prototype. In the paper, theoretical models of the whole system were analysed and the system performance was successfully verified in both steady state and transient state conditions. The experimental results showed a good agreement with the theoretical knowledge.
- 30 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 33 (2) , 1335-1346
Active Virtual Ground— Single-Phase Transformerless Grid-Connected Voltage Source Inverter Topology
An efficient single-phase Transformerless grid-connected voltage source inverter topology by using the proposed active virtual ground (AVG) technique is presented. With the AVG, the conventional output L filter can be reconfigured to LCL structure without adding additional inductor. High-frequency differential mode current ripple can be significantly suppressed comparing to the available single-phase grid-connected inverter topologies. Additionally, strong attenuation to the high-frequency common-mode current is achieved. It is particularly important for some applications such as photovoltaic and motor drives. High efficiency can be achieved due to fewer components involved in the conduction loss. Cost of the magnetic device can be reduced since the required inductance of the filter becomes smaller. Performance of the proposed inverter has been evaluated analytically. Experimental verification is performed on a 1-kW, 400-V input, and 110-V/60-Hz output prototype.
- 30 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 33 (2) , 1335-1346
Active Virtual Ground— Single-Phase Transformerless Grid-Connected Voltage Source Inverter Topology
An efficient single-phase Transformerless grid-connected voltage source inverter topology by using the proposed active virtual ground (AVG) technique is presented. With the AVG, the conventional output L filter can be reconfigured to LCL structure without adding additional inductor. High-frequency differential mode current ripple can be significantly suppressed comparing to the available single-phase grid-connected inverter topologies. Additionally, strong attenuation to the high-frequency common-mode current is achieved. It is particularly important for some applications such as photovoltaic and motor drives. High efficiency can be achieved due to fewer components involved in the conduction loss. Cost of the magnetic device can be reduced since the required inductance of the filter becomes smaller. Performance of the proposed inverter has been evaluated analytically. Experimental verification is performed on a 1-kW, 400-V input, and 110-V/60-Hz output prototype.