DSDana B. Sulas-Kern

Dana B. Sulas-Kern

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dana B. Sulas-Kern has a total of 175 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Extended Accelerated Stress Testing of Lamination-Free Edge-Sealed Photovoltaic Minimodules

    by Steve Johnston, Ryan Ruhle, Dana B. Kern, Kent Terwilliger, David Durney, Walajabad Sampath

  • Open Access

    Optical Durability of Contemporary PV Encapsulants Through Artificial UV Weathering

    by Dennice M. Roberts, Xavier Hanna, David C. Miller, Rachael L. Arnold, Jimmy M. Newkirk, Kent Terwilliger, Steve Johnston, Rebecca B. Wai, Peter Hacke, Dana B. Kern

    Modern c‐Si photovoltaic (PV) cells provide high performance but can be vulnerable to ultraviolet light induced degradation (UV‐ID). Encapsulants, if chosen correctly, can mitigate UV‐ID of the PV cell. Here, we explore performance and durability of 14 commercial encapsulant materials before, during, and after irradiation with UV‐containing light. Materials include contemporary, polymer‐based encapsulants with a base polymer of poly (ethylene co‐vinyl acetate) (EVA), polyethylene‐α‐olefin (POE), or their composite (EPE). Polymers contain additives that induce UV‐blocking, UV‐transmitting, or UV‐downshifting properties. We use test coupons to study degradation in a chamber held at 65°C under a xenon light source for up to 4000 h of exposure, corresponding to a cumulative dose of 11.5 MJ/m 2 at 340 nm. We examine optical properties including spectral transmittance, yellowness index and spectral fluorescence, considering changes to both the encapsulant and glass as a function of weathering time. Degradation modes identified include discoloration, changes to UV cutoff wavelength, changes to solar‐weighted transmittance, and most notably a change to the UV‐managing properties of some additives. We propose the use of solar‐weighted transmittance in the 300‐ to 400‐nm range to better track performance changes in the UV region associated with the UV‐related additive. This is especially relevant for the emerging class of UV‐downshifting additives, as metrics like UV‐cutoff can understate the degree of degradation or change in these materials. While most encapsulants show very little change after weathering, some show significant changes that directly impact how much UV light would reach an underlying cell.


  • Open Access

    Using Explainable Artificial Intelligence to Predict Perovskite Solar Cell Electrical Metastability from Operando Photoluminescence Images in Accelerated Stress Testing

    by Jackson W. Schall, Leidong Xu, Andrew Glaws, Ambarish Nag, Dana B. Kern, Juliette Ugirumurera

    Metal halide perovskite (MHP) solar cells exhibit a metastable response to bias governed by coupled ionic–electronic processes, complicating the conventional reciprocity relation between luminescence intensity and device open‐circuit voltage ( V oc ). This limits the use of luminescence as a diagnostic for device screening or accelerated stress testing, motivating new approaches that can interpret photoluminescence (PL) signals under nonequilibrium conditions. From the artificial intelligence perspective, we develop an explainable deep learning framework that integrates convolutional neural networks (CNN), long short‐term memory (LSTM) layers, and an attention mechanism to learn spatiotemporal features from operando photoluminescence PL image sequences. The model achieves a mean absolute error of ±0.027 V in predicting open‐circuit voltage transients and reduces extreme‐tail errors by up to 78% compared to physics‐based reciprocity calculations. Gradient‐weighted Class Activation Mapping (Grad‐CAM) provides interpretability by highlighting physically meaningful regions such as electrode edges and emergent defect features. From the engineering application perspective, this framework enables accurate, contactless prediction of device V oc and identification of degradation‐relevant features during accelerated aging of perovskite solar cells. This approach demonstrates how explainable AI can enhance operando diagnostics and reliability analysis in photovoltaic devices under nonequilibrium conditions.


  • Open Access

    Multiscale Characterization of Electrode-Induced Degradation in Perovskite Solar Cells

    by Goutam Paul, Jackson W. Schall, Harvey L. Guthrey, Marc Migliozzi, Robert Tirawat, Dennice M. Roberts, Steven W. Johnston, Mowafak M. Al-Jassim, Chun-Sheng Jiang, Axel F. Palmstrom, et al.

    The stability of metal-halide-perovskite (MHP) solar cells must be understood and improved for the commercial viability of MHP technologies. Here, we apply multiscale characterization methods to study degradation modes, specifically electrode corrosion, for p-i-n MHP partial device stacks and full devices that are stored in the dark under an inert atmosphere. Our multiscale characterization approaches include full-device electro-optical performance using current–voltage (JV) curves and spatial imaging with electroluminescence (EL) and photoluminescence (PL). We further correlate interface properties using cross-sectional Kelvin probe force microscopy, which maps the nanoscale electric field properties, and electron microscopy, which demonstrates structural and chemical features. Devices stored as a full device stack degrade primarily by metal (Ag) electrode diffusion into the absorber, with formation of AgI byproducts and Ag accumulation near the indium tin oxide (ITO) contact. This causes decomposition of the perovskite absorber domains, loss of the potential drop at the electron transport layer (ETL)/perovskite interface near the metal contact, and increased equivalent resistance at the perovskite/hole transport layer (HTL) interface near the ITO contact. The devices stored without metal show a different degradation pathway dominated by corrosion of the ITO, creating voids at the ITO electrode surface with diffusion of In and Sn into the absorber. We conclude that metal electrode-induced degradation is the most severe degradation pathway under dark storage, but that ITO corrosion and absorber instability must also be mitigated. We further demonstrate mitigation of these degradation pathways by changes to the device stack, including a SnO x blocking layer at the ETL side and replacing ITO with FTO at the HTL side. These results provide a useful demonstration of specific dark degradation pathways at each electrode interface, as well as a unique multiscale example that links degradation of chemical, structural, and electrical interface properties to the full-device electro-optical characteristics.


  • Photovoltaic Module Backsheet Burns Attributed to Misaligned Busbar Wires

    by Steve Johnston, Dana B. Kern, Rebecca B. Wai, Harvey Guthrey, Steven P. Harvey, Ingrid L. Repins

    A photovoltaic module in an outdoor single-axis tracking, utility-scale field experienced a backsheet burn that exposed the rear of the cells and started a grass fire. The opening in the backsheet developed due to increased heating where the busbar wires stringing the cells together were offset from their original solder pad locations. Several other examples of similar backsheet burns were found at this installation, and some cases also show that thermal stress caused the front glass to crack and shatter. Photoluminescence, electroluminescence, and thermal imaging techniques document the module performance and cell damage. Ultraviolet fluorescence provides time-dependent information to distinguish an older cell crack that developed with the backsheet melting from a newer crack that formed during the arc flash fire event and a scrape likely from handling to remove and transport the module. Microscopy analysis identifies the metal composition of the solder as tin/lead and not a bismuth-containing low-temperature variety. Laser isolation of a cell contact area with misaligned wire shows intermittent contact quality, suggesting the module likely passed factory screening and showed no high contact resistance prior to aging in the field.

  • UV‐Induced Degradation and Associated Metastability in TOPCon Photovoltaic Modules: Understanding Kinetics and Cell Variance

    by Dana B. Kern, Rebecca Wai, Kent Terwilliger, Steve Johnston

    Tunnel oxide passivated contact (TOPCon) silicon photovoltaic (PV) modules are dominating the PV market, but they may be susceptible to degradation under ultraviolet (UV)‐containing light. Quantifying the impacts of UV‐induced degradation (UVID) is complicated by an associated metastability causing further degradation under dark storage and rapid recovery under sunlight. Here, we study modules that have −2.3% to −3.2% nonrecoverable UVID loss after 60 kWh/m 2 dose of 340 nm light and additional recoverable loss under dark storage. We use in situ electroluminescence (EL) imaging to characterize the post‐UVID metastability at the module level. The cell‐by‐cell dark degradation and recovery kinetics span a wide range from +6% to −70% changes in EL intensity after 520 h of dark storage, which returns to ± 4% of the initial post‐UVID EL intensity after illumination. The kinetics follow double exponential rates with dark storage degradation time constants of 345 and 45 h, and UV light recovery time constants of 5 min and 36 s. We propose that this is consistent with prior reports of kinetics for light‐soaking metastability in Al 2 O 3 passivation. Finally, we further show that cells having high UVID also have injection‐dependent effective carrier lifetimes and significant intra‐cell variance, suggesting possible origins of processing inconsistency.


  • Uncovering Degradation Mechanisms in Bifacial PV Modules: Insights From Five Years of Field Operation

    by Silvana Ovaitt, Dana B. Kern, Chris Deline, Dirk Jordan, Heather Mirletz, Yazan J. K. Musleh, Elizabeth Palmiotti, Peter Hacke, Steve Johnston

  • Open Access

    PV Durability at Scale: Assessing Bifacial and TOPCon Field Performance

    by Chris Deline, Silvana Ovaitt, Dirk Jordan, Dana Kern, Josh Parker, Bill Sekulic

  • Open Access

    Screening Metal Halide Perovskite Solar Modules for Premature Field Failures

    by Nicholas P. Irvin, Byron McDanold, Jackson Schall, Joshua Parker, Kent Terwilliger, Rachael Arnold, Sona Uličná, Xiaoqiang Shi, Chengbin Fei, Xinwen Zhang, et al.

    Developing metal halide perovskite (MHP) photovoltaic (PV) devices into reliable large-area solar modules could accelerate global solar energy deployment. Many MHP devices are susceptible to degradation under light and elevated temperature (LT). Published research on LT testing is limited at the module level, and LT testing has not yet been developed for qualification testing of commercial PV products. This report assesses whether results of LT testing at moderately elevated temperatures correlate with those of field-tested modules from the same batch. Six batches of samples from four manufacturers are assessed. It is shown that modules with a robust package that can maintain over 80% of their peak efficiency during LT testing at 55 °C for 100 h are more likely to retain over 80% of their peak efficiency during outdoor operation for 10 weeks. This finding is a step towards developing a validated test protocol that could be incorporated into a qualification standard for the commercialization of MHP PV technologies.