Luc Lavier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luc Lavier has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- James Biemiller
U.S. Geological Survey, Geology, Minerals, Energy, and Geophysics Science Center, Portland, Oregon, U.S.A.
8 shared publications - Chase J. Shyu
Institute for Geophysics, Jackson School of Geosciences, University of Texas at Austin, Texas 78758, United States
5 shared publications - Eh Tan
Institute of Earth Sciences, Academia Sinica, Taipei 11529, Taiwan
5 shared publications Eunseo Choi
Center for Earthquake Research and Information, The University of Memphis, Tennessee 38152, United States
5 shared publicationsJaeyoon Keum
Department of Geology, Gyeongsang National University, Jinju 52828, Republic of Korea
5 shared publications- Mathilde Cannat
Institut de Physique du Globe de Paris UMR 7154 CNRS Université Paris Cité Paris France
5 shared publications
Latest Publications
- Open Access
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Reply on RC2
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessReply on RC2
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- Open Access
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Reply on RC1
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessReply on RC1
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- Open Access
- 26 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Comment on egusphere-2026-2922
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- 26 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessComment on egusphere-2026-2922
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- Open Access
- 19 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Comment on egusphere-2026-2922
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- 19 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-45
Open AccessComment on egusphere-2026-2922
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- Open Access
- 12 June 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-45
DynEarthSol v2.0: An Efficient Explicit Lagrangian Solver for Geodynamics, Surface Processes, and Earthquake-Cycle Dynamics
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- 12 June 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-45
Open AccessDynEarthSol v2.0: An Efficient Explicit Lagrangian Solver for Geodynamics, Surface Processes, and Earthquake-Cycle Dynamics
DynEarthSol version 2.0 (DES v2.0) provides a scalable two- and three-dimensional geodynamic modeling platform designed for multiphysical simulations across temporal and spatial scales. This release achieves high-performance execution by leveraging heterogeneous CPU-GPU architectures; and maintains computational consistency on unstructured meshes through a deterministic two-stage update algorithm, eliminating race conditions and ensuring bitwise reproducibility. The updated framework further expands physical realism through a staggered two-way coupling with the goSPL landscape evolution model, which we validated by simulating the development of a low-angle normal fault and the associated geomorphic signatures. Additionally, we integrated a Dieterich-Ruina rate-and-state friction formulation into the existing Mohr-Coulomb elastoplastic structure. By resolving state-variable evolution within finite-thickness shear zones, this approach enables the simulation of complex fault behaviors, from stable creep to stick-slip instabilities, with finite-thickness faults. The new friction model was verified against analytical benchmarks and applied to earthquake-cycle applications. DES v2.0 serves as a robust, GPU-accelerated, and unified platform for investigating the coupled system of tectonic deformation, surface processes, and seismic-cycle dynamics.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
High-resolution Coral Geodesy in the Solomon Islands
The classical earthquake cycle is commonly described as alternating between long periods (decades to centuries) of interseismic locking and brief episodes (seconds) of coseismic rupture. However, increasingly dense geodetic observations from recent megathrust earthquakes reveal a more complex spectrum of transient deformation processes that challenge this binary framework. The New Georgia Group in the Solomon Islands provides a unique natural laboratory to investigate these processes, where the Woodlark Basin subducts beneath the Solomon Arc and has generated large megathrust earthquakes, including the 1936 Mw 7.9 and 2007 Mw 8.1 events.The close proximity of the islands to the trench allows Porites corals to serve as high-resolution recorders of vertical ground motion. While coral morphology has long been used to identify coseismic uplift, we introduce a novel approach that combines coral morphology with stable isotope analysis (δ¹³C and δ¹⁸O) to quantify relative sea-level (RSL) variations at annual resolution. We first assess the robustness of the relationship between coral water depth and δ¹³C using 141 new samples collected across a range of depths formed within the same time interval. For depths between 170 and 110 cm below sea level, δ¹³C exhibits a strong linear correlation with water depth (R² = 0.982), while shallower samples display a non-linear response.We then apply this RSL proxy to a 692-sample coral time series spanning 1928–2012 and validate the reconstructed RSL against available tide-gauge records. The 2007 Mw 8.1 earthquake is clearly resolved, with coral morphology recording ~70 cm of coseismic uplift expressed as a pronounced die-down surface, accompanied by a δ¹³C excursion exceeding 2‰. The 1936 Mw 7.9 event is similarly captured by a distinct δ¹⁸O anomaly, with postseismic relaxation observed consistently along two independent drilling transects.Beyond discrete coseismic signals, the record reveals multi-year to decadal periods of uplift and subsidence that we interpret as complex interseismic deformation. In particular, we identify intervals consistent with slow slip activity during 1955–1964, 1977–1986, and 1999–2002. These results demonstrate that stable isotope measurements in corals provide a powerful bridge between instrumental geodesy and paleoseismology, enabling a continuous, high-resolution view of subduction-zone deformation and stress evolution across the full earthquake cycle.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessHigh-resolution Coral Geodesy in the Solomon Islands
The classical earthquake cycle is commonly described as alternating between long periods (decades to centuries) of interseismic locking and brief episodes (seconds) of coseismic rupture. However, increasingly dense geodetic observations from recent megathrust earthquakes reveal a more complex spectrum of transient deformation processes that challenge this binary framework. The New Georgia Group in the Solomon Islands provides a unique natural laboratory to investigate these processes, where the Woodlark Basin subducts beneath the Solomon Arc and has generated large megathrust earthquakes, including the 1936 Mw 7.9 and 2007 Mw 8.1 events.The close proximity of the islands to the trench allows Porites corals to serve as high-resolution recorders of vertical ground motion. While coral morphology has long been used to identify coseismic uplift, we introduce a novel approach that combines coral morphology with stable isotope analysis (δ¹³C and δ¹⁸O) to quantify relative sea-level (RSL) variations at annual resolution. We first assess the robustness of the relationship between coral water depth and δ¹³C using 141 new samples collected across a range of depths formed within the same time interval. For depths between 170 and 110 cm below sea level, δ¹³C exhibits a strong linear correlation with water depth (R² = 0.982), while shallower samples display a non-linear response.We then apply this RSL proxy to a 692-sample coral time series spanning 1928–2012 and validate the reconstructed RSL against available tide-gauge records. The 2007 Mw 8.1 earthquake is clearly resolved, with coral morphology recording ~70 cm of coseismic uplift expressed as a pronounced die-down surface, accompanied by a δ¹³C excursion exceeding 2‰. The 1936 Mw 7.9 event is similarly captured by a distinct δ¹⁸O anomaly, with postseismic relaxation observed consistently along two independent drilling transects.Beyond discrete coseismic signals, the record reveals multi-year to decadal periods of uplift and subsidence that we interpret as complex interseismic deformation. In particular, we identify intervals consistent with slow slip activity during 1955–1964, 1977–1986, and 1999–2002. These results demonstrate that stable isotope measurements in corals provide a powerful bridge between instrumental geodesy and paleoseismology, enabling a continuous, high-resolution view of subduction-zone deformation and stress evolution across the full earthquake cycle.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Magma-poor To Volcanic Margins: New Models
We use a newly developed model formulation to explore the potential structural evolution of a spectrum of margins from Volcanic to Magma-poor. We assume that the melt is incompressible, and we simulate melt migration as magmatic intrusions and volcanic extrusions as volume change and stress change in the brittle and ductile crust. We also model heat transfer generated by melt migration, latent heat of recrystallization, melt production and hydrothermal circulation. Based on our simulation and observations of passive margins, we propose models for the formation of volcanic and magma-poor margins. While magma-poor margins evolution follows well-known stages, we show that volcanic margins represent a wide spectrum of behavior from purely accretionary and volcanic to mixed extensional and volcanic. The nature and extent of seaward dipping reflectors (SDRs), the crustal composition and structure, the subsidence of the margins vary as a function of the mantle potential temperature in the asthenosphere and the initial geothermal signature of the lithosphere.We can resume our main findings which diverge strongly from existing models for volcanic margins: (1) For mantle potential temperatures (Tp) greater than 1400oC, we find that volcanic margins form through the accretion of intrusive magmatic and extrusive volcanic product of melt production in the asthenosphere. This system forms an accretionary center of thickness and width increasing with Tp. On both side of the accretionary axis, two symmetrical SDRs basins form. Subsidence of these basins increase with decreasing Tp. Increasing subsidence generated by far field extension leads to an increase in clastic sedimentation and controls SDRs composition. Decreasing Tp and increased subsidence leads to the formation of clastic rich SDRs while increasing Tp and decreased subsidence leads to formation of mainly volcanic/mafic SDRs. (2) The exhaustion of melt production leads to ridge jumps and the formation of eccentric accretionary center. When subsidence is more pronounced for a lower Tp we simulate periods of uplift and subsidence correlated with periods of higher and subdued melt production, respectively. This process may result in cyclical periods of mafic followed by clastic sedimentation. (3) For Tp lower than 1400oC, intermediate margins form with both volcanic and extensional processes occurring concurrently. This processes eventually lead to the asymmetric propagation of volcanic centers which may lead to seafloor spreading.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessMagma-poor To Volcanic Margins: New Models
We use a newly developed model formulation to explore the potential structural evolution of a spectrum of margins from Volcanic to Magma-poor. We assume that the melt is incompressible, and we simulate melt migration as magmatic intrusions and volcanic extrusions as volume change and stress change in the brittle and ductile crust. We also model heat transfer generated by melt migration, latent heat of recrystallization, melt production and hydrothermal circulation. Based on our simulation and observations of passive margins, we propose models for the formation of volcanic and magma-poor margins. While magma-poor margins evolution follows well-known stages, we show that volcanic margins represent a wide spectrum of behavior from purely accretionary and volcanic to mixed extensional and volcanic. The nature and extent of seaward dipping reflectors (SDRs), the crustal composition and structure, the subsidence of the margins vary as a function of the mantle potential temperature in the asthenosphere and the initial geothermal signature of the lithosphere.We can resume our main findings which diverge strongly from existing models for volcanic margins: (1) For mantle potential temperatures (Tp) greater than 1400oC, we find that volcanic margins form through the accretion of intrusive magmatic and extrusive volcanic product of melt production in the asthenosphere. This system forms an accretionary center of thickness and width increasing with Tp. On both side of the accretionary axis, two symmetrical SDRs basins form. Subsidence of these basins increase with decreasing Tp. Increasing subsidence generated by far field extension leads to an increase in clastic sedimentation and controls SDRs composition. Decreasing Tp and increased subsidence leads to the formation of clastic rich SDRs while increasing Tp and decreased subsidence leads to formation of mainly volcanic/mafic SDRs. (2) The exhaustion of melt production leads to ridge jumps and the formation of eccentric accretionary center. When subsidence is more pronounced for a lower Tp we simulate periods of uplift and subsidence correlated with periods of higher and subdued melt production, respectively. This process may result in cyclical periods of mafic followed by clastic sedimentation. (3) For Tp lower than 1400oC, intermediate margins form with both volcanic and extensional processes occurring concurrently. This processes eventually lead to the asymmetric propagation of volcanic centers which may lead to seafloor spreading.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Decadal to Centennial Vertical Paleogeodetic Record of the Seismic Cycle in the Western Solomons from Coral Paleogeodesy and Stable Isotopes
The extremely shallow location of the seismogenic megathrust in the western Solomons and the existence of significant island land area on the upper plate overlying the seismogenic zone enables us to use corals to obtain vertical motion history closer to the trench and lower plate than anywhere else in the world. In addition, coral paleogeodesy on Porites microatolls acting as long-term vertical positioning station may provide a relative sea level (RSL) change record spanning hundreds of years. Our goal is to develop a centennial record of sea level change and vertical tectonics from multiple Porites microatolls. By isolating the RSL record common to each microatolls, we can then derive a vertical tectonic record by removing the RSL variations from the raw time series recorded by the microatolls. To achieve that goal, we present recent work combining coral paleogedesy, annual δ13C record and modeling of coral morphology over the last 80 years in the western Solomons. The steps to obtain a long-term record of sea level change and vertical tectonics on samples of a ~80 year old Porites head collected in 2013 after the 2007 Mw 8.1 earthquake. We sampled the coral over 2 to 3 annual bands every ~2 months at various depths and times, performed a stable isotope analysis on each sample, cross-correlated each record and plotted the variation in δ13C versus water depth. Linear regressions show that the variation in accumulated δ13C as a function of water depth relative to the coral’s top water depth is 41 cm/‰ with a R2 coefficient of 0.98. We the sampled bimonthly stable isotopes along 80 annual bands. The span of each year is determined from correlating the annual banding and the seasonal cycles in δ13C and δ18O. Applying the linear relationship to the δ13C generates a raw record of relative sea level change. We then use the monthly tide gauge record in Honiara (Guadalcanal) to remove the effects of regional sea level change to the RSL time series obtain from the coral. The result is a record of the vertical tectonic motion of part of the Western Solomon before and after the Mw8.1 2007 earthquake. We analyze the results in terms of the yearly vertical record of the seismic cycle. Current geodetic records at subduction zones constrain at most deformation during one earthquake cycle while multiple earthquake cycles are needed to robustly constrain the physical state of a megathrust. We hope to be able to extend the coral paleogeodetic record in the Weatern Solomons over several hundred years over multiple seismic cycles. This would represent a critical data gap that hampers our understanding of subduction physics and our ability to forecast earthquakes.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessDecadal to Centennial Vertical Paleogeodetic Record of the Seismic Cycle in the Western Solomons from Coral Paleogeodesy and Stable Isotopes
The extremely shallow location of the seismogenic megathrust in the western Solomons and the existence of significant island land area on the upper plate overlying the seismogenic zone enables us to use corals to obtain vertical motion history closer to the trench and lower plate than anywhere else in the world. In addition, coral paleogeodesy on Porites microatolls acting as long-term vertical positioning station may provide a relative sea level (RSL) change record spanning hundreds of years. Our goal is to develop a centennial record of sea level change and vertical tectonics from multiple Porites microatolls. By isolating the RSL record common to each microatolls, we can then derive a vertical tectonic record by removing the RSL variations from the raw time series recorded by the microatolls. To achieve that goal, we present recent work combining coral paleogedesy, annual δ13C record and modeling of coral morphology over the last 80 years in the western Solomons. The steps to obtain a long-term record of sea level change and vertical tectonics on samples of a ~80 year old Porites head collected in 2013 after the 2007 Mw 8.1 earthquake. We sampled the coral over 2 to 3 annual bands every ~2 months at various depths and times, performed a stable isotope analysis on each sample, cross-correlated each record and plotted the variation in δ13C versus water depth. Linear regressions show that the variation in accumulated δ13C as a function of water depth relative to the coral’s top water depth is 41 cm/‰ with a R2 coefficient of 0.98. We the sampled bimonthly stable isotopes along 80 annual bands. The span of each year is determined from correlating the annual banding and the seasonal cycles in δ13C and δ18O. Applying the linear relationship to the δ13C generates a raw record of relative sea level change. We then use the monthly tide gauge record in Honiara (Guadalcanal) to remove the effects of regional sea level change to the RSL time series obtain from the coral. The result is a record of the vertical tectonic motion of part of the Western Solomon before and after the Mw8.1 2007 earthquake. We analyze the results in terms of the yearly vertical record of the seismic cycle. Current geodetic records at subduction zones constrain at most deformation during one earthquake cycle while multiple earthquake cycles are needed to robustly constrain the physical state of a megathrust. We hope to be able to extend the coral paleogeodetic record in the Weatern Solomons over several hundred years over multiple seismic cycles. This would represent a critical data gap that hampers our understanding of subduction physics and our ability to forecast earthquakes.
- Open Access
- 7 November 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (11)
Mantle Deformation Processes During the Rift‐To‐Drift Transition at Magma‐Poor Margins
The rift‐to‐drift transition at rifted margins is an area of active investigation due to an incomplete understanding of the spatial and temporal evolution of physical and chemical processes at the ocean‐continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing physical processes and observations relevant to rifted margin evolution. We synthesize results from geological observations of fossil OCTs preserved in ophiolites, a recent seismic experiment on the Ivorian margin, and numerical modeling to characterize mantle deformation and melt production for magma‐poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates, our model results show homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer that a hot, upwelling, melt‐rich asthenosphere is an important control on the local stress environment. During the exhumation phase, continentward‐dipping shear zones couple with seaward‐dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms core‐complex‐like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out‐of‐sequence continentward‐dipping detachment faults in the oceanic crust and subcontinental mantle.
- 7 November 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (11)
Open AccessMantle Deformation Processes During the Rift‐To‐Drift Transition at Magma‐Poor Margins
The rift‐to‐drift transition at rifted margins is an area of active investigation due to an incomplete understanding of the spatial and temporal evolution of physical and chemical processes at the ocean‐continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing physical processes and observations relevant to rifted margin evolution. We synthesize results from geological observations of fossil OCTs preserved in ophiolites, a recent seismic experiment on the Ivorian margin, and numerical modeling to characterize mantle deformation and melt production for magma‐poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates, our model results show homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer that a hot, upwelling, melt‐rich asthenosphere is an important control on the local stress environment. During the exhumation phase, continentward‐dipping shear zones couple with seaward‐dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms core‐complex‐like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out‐of‐sequence continentward‐dipping detachment faults in the oceanic crust and subcontinental mantle.
- Open Access
- 28 March 2023
- Published by Wiley in ESS Open Archive
Mantle Deformation Processes during the Rift-to-Drift Transition at Magma-Poor Margins
The rift-to-drift transition at rifted margins is an area of active investigation due to unresolved issues of the ocean-continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing observations within rifted margin evolution. In this article, we synthesize geological observations from fossil ocean-continent transitions preserved in ophiolites, a recent seismic experiment on the Ivorian Margin of West Africa, and GeoFLAC models to characterize mantle deformation and melt production for magma-poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates our model results show important homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer through changes in fault orientation that upwelling, melt-rich asthenosphere is an important control on the local stress environment. During the exhumation phase of rifting, continentward-dipping shear zones couple with seaward-dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms into core-complex-like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out-of-sequence, continentward-dipping detachment faults in the oceanic crust and subcontinental mantle.
- 28 March 2023
- Published by Wiley in ESS Open Archive
Open AccessMantle Deformation Processes during the Rift-to-Drift Transition at Magma-Poor Margins
The rift-to-drift transition at rifted margins is an area of active investigation due to unresolved issues of the ocean-continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing observations within rifted margin evolution. In this article, we synthesize geological observations from fossil ocean-continent transitions preserved in ophiolites, a recent seismic experiment on the Ivorian Margin of West Africa, and GeoFLAC models to characterize mantle deformation and melt production for magma-poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates our model results show important homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer through changes in fault orientation that upwelling, melt-rich asthenosphere is an important control on the local stress environment. During the exhumation phase of rifting, continentward-dipping shear zones couple with seaward-dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms into core-complex-like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out-of-sequence, continentward-dipping detachment faults in the oceanic crust and subcontinental mantle.