Erica Ann Douglas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Erica Ann Douglas has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Fan Ren
Department of Chemical Engineering, University of Florida 3 , Gainesville, Florida 32611
9 shared publications - Stephen. J. Pearton
Material Science and Engineering, University of Florida 3 , Gainesville, Florida 32611
9 shared publications Andrew A. Allerman
Sandia National Laboratories , PO Box 5800, Albuquerque, New Mexico 87185-1085
7 shared publications- Albert G. Baca
Sandia National Laboratories, Albuquerque, NM, USA
6 shared publications Albert G. Baca
Sandia National Laboratories , Albuquerque, New Mexico 87123 USA
5 shared publicationsAndrew M. Armstrong
Sandia National Laboratories, Albuquerque, NM 87185
5 shared publications
Latest Publications
- Open Access
- 26 March 2023
- Published by Association for Computing Machinery (ACM)
- p. 78-79
Co-design for Heterogeneous Integration
As scaling for CMOS transistors asymptotically approaches the end of Moore's Law, the need to push into 3D integration schemes to innovate capabilities is gaining significant traction. Further, rapid development of new semiconductor solutions, such as heterogeneous integration, has turned the semiconductor industry's consistent march towards next generation products into new arenas. In 2018, the Department of Energy Office of Science (DOE SC) released their "Basic Research Needs for Microelectronics," communicating a strong push towards "parallel but intimately networked efforts to create radically new capabilities,"1 which they have coined as "co-design." Advanced packaging and heterogeneous integration, particularly with mixed semiconductor materials (e.g., CMOS FPGAs & GaN RF amplifiers) is a realm ripe for applicability towards DOE SC's co-design call to action. In theory, development occurring at all scales across the semiconductor ecosystem, particularly across disciplines that are not traditionally adjacent, should significantly accelerate innovation. In reality, co-design requires a paradigm shift in approach, requiring not only interconnected parallel development. Further, accurate ground truth data during learning cycles is critical in order to effectively and efficiently communicate across disparate disciplines and advise design iterations across the microelectronics ecosystem. This talk will outline three orthogonal facets towards co-design for HI: (1) on-going efforts towards development of materials characterization and failure analysis techniques to enable accurate evaluation of materials and heterogeneously integrated components, (2) development of artificial intelligence & machine learning algorithms for large scale, high throughput process development and characterization, and (3) development of capabilities for rapid communication and visualization of data across disparate disciplines.
- 26 March 2023
- Published by Association for Computing Machinery (ACM)
- p. 78-79
Open AccessCo-design for Heterogeneous Integration
As scaling for CMOS transistors asymptotically approaches the end of Moore's Law, the need to push into 3D integration schemes to innovate capabilities is gaining significant traction. Further, rapid development of new semiconductor solutions, such as heterogeneous integration, has turned the semiconductor industry's consistent march towards next generation products into new arenas. In 2018, the Department of Energy Office of Science (DOE SC) released their "Basic Research Needs for Microelectronics," communicating a strong push towards "parallel but intimately networked efforts to create radically new capabilities,"1 which they have coined as "co-design." Advanced packaging and heterogeneous integration, particularly with mixed semiconductor materials (e.g., CMOS FPGAs & GaN RF amplifiers) is a realm ripe for applicability towards DOE SC's co-design call to action. In theory, development occurring at all scales across the semiconductor ecosystem, particularly across disciplines that are not traditionally adjacent, should significantly accelerate innovation. In reality, co-design requires a paradigm shift in approach, requiring not only interconnected parallel development. Further, accurate ground truth data during learning cycles is critical in order to effectively and efficiently communicate across disparate disciplines and advise design iterations across the microelectronics ecosystem. This talk will outline three orthogonal facets towards co-design for HI: (1) on-going efforts towards development of materials characterization and failure analysis techniques to enable accurate evaluation of materials and heterogeneously integrated components, (2) development of artificial intelligence & machine learning algorithms for large scale, high throughput process development and characterization, and (3) development of capabilities for rapid communication and visualization of data across disparate disciplines.
- Open Access
- 7 April 2022
- Published by Office of Scientific and Technical Information (OSTI)
AI-Enhanced Co-Design for Next-Generation Microelectronics: Innovating Innovation [Workshop Report]
The U.S. Department of Energy's Office of Scientific and Technical Information
- 7 April 2022
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessAI-Enhanced Co-Design for Next-Generation Microelectronics: Innovating Innovation [Workshop Report]
The U.S. Department of Energy's Office of Scientific and Technical Information
- 23 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (4) , 044501
Residual stress analysis of aluminum nitride piezoelectric micromachined ultrasonic transducers using Raman spectroscopy
In this study, the Raman biaxial stress coefficients KII and strain-free phonon frequencies ω0 have been determined for the E2 (low), E2 (high), and A1 (LO) phonon modes of aluminum nitride, AlN, using both experimental and theoretical approaches. The E2 (high) mode of AlN is recommended for the residual stress analysis of AlN due to its high sensitivity and the largest signal-to-noise ratio among the studied modes. The E2 (high) Raman biaxial stress coefficient of −3.8 cm−1/GPa and strain-free phonon frequency of 656.68 cm−1 were then applied to perform both macroscopic and microscopic stress mappings. For macroscopic stress evaluation, the spatial variation of residual stress was measured across an AlN-on-Si wafer prepared by sputter deposition. A cross-wafer variation in residual stress of ∼150 MPa was observed regardless of the average stress state of the film. Microscopic stress evaluation was performed on AlN piezoelectric micromachined ultrasonic transducers (pMUTs) with submicrometer spatial resolution. These measurements were used to assess the effect of device fabrication on residual stress distribution in an individual pMUT and the effect of residual stress on the resonance frequency. At ∼20 μm directly outside the outer edge of the pMUT electrode, a large lateral spatial variation in residual stress of ∼100 MPa was measured, highlighting the impact of metallization structures on residual stress in the AlN film.
- 23 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (4) , 044501
Residual stress analysis of aluminum nitride piezoelectric micromachined ultrasonic transducers using Raman spectroscopy
In this study, the Raman biaxial stress coefficients KII and strain-free phonon frequencies ω0 have been determined for the E2 (low), E2 (high), and A1 (LO) phonon modes of aluminum nitride, AlN, using both experimental and theoretical approaches. The E2 (high) mode of AlN is recommended for the residual stress analysis of AlN due to its high sensitivity and the largest signal-to-noise ratio among the studied modes. The E2 (high) Raman biaxial stress coefficient of −3.8 cm−1/GPa and strain-free phonon frequency of 656.68 cm−1 were then applied to perform both macroscopic and microscopic stress mappings. For macroscopic stress evaluation, the spatial variation of residual stress was measured across an AlN-on-Si wafer prepared by sputter deposition. A cross-wafer variation in residual stress of ∼150 MPa was observed regardless of the average stress state of the film. Microscopic stress evaluation was performed on AlN piezoelectric micromachined ultrasonic transducers (pMUTs) with submicrometer spatial resolution. These measurements were used to assess the effect of device fabrication on residual stress distribution in an individual pMUT and the effect of residual stress on the resonance frequency. At ∼20 μm directly outside the outer edge of the pMUT electrode, a large lateral spatial variation in residual stress of ∼100 MPa was measured, highlighting the impact of metallization structures on residual stress in the AlN film.
- 9 April 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 38 (3) , 033202
High temperature operation to 500 °C of AlGaN graded polarization-doped field-effect transistors
AlGaN polarization-doped field-effect transistors were characterized by DC and pulsed measurements from room temperature to 500 °C in ambient. DC current-voltage characteristics demonstrated only a 70% reduction in on-state current from 25 to 500 °C and full gate modulation, regardless of the operating temperature. Near ideal gate lag measurement was realized across the temperature range that is indicative of a high-quality substrate and sufficient surface passivation. The ability for operation at high temperature is enabled by the high Schottky barrier height from the Ni/Au gate contact, with values of 2.05 and 2.76 eV at 25 and 500 °C, respectively. The high barrier height due to the insulatorlike aluminum nitride layer leads to an ION/IOFF ratio of 1.5 × 109 and 6 × 103 at room temperature and 500 °C, respectively. Transmission electron microscopy was used to confirm the stability of the heterostructure even after an extended high-temperature operation with only minor interdiffusion of the Ni/Au Schottky contact. The use of refractory metals in all contacts will be key to ensure a stable extended high-temperature operation.
- 9 April 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 38 (3) , 033202
High temperature operation to 500 °C of AlGaN graded polarization-doped field-effect transistors
AlGaN polarization-doped field-effect transistors were characterized by DC and pulsed measurements from room temperature to 500 °C in ambient. DC current-voltage characteristics demonstrated only a 70% reduction in on-state current from 25 to 500 °C and full gate modulation, regardless of the operating temperature. Near ideal gate lag measurement was realized across the temperature range that is indicative of a high-quality substrate and sufficient surface passivation. The ability for operation at high temperature is enabled by the high Schottky barrier height from the Ni/Au gate contact, with values of 2.05 and 2.76 eV at 25 and 500 °C, respectively. The high barrier height due to the insulatorlike aluminum nitride layer leads to an ION/IOFF ratio of 1.5 × 109 and 6 × 103 at room temperature and 500 °C, respectively. Transmission electron microscopy was used to confirm the stability of the heterostructure even after an extended high-temperature operation with only minor interdiffusion of the Ni/Au Schottky contact. The use of refractory metals in all contacts will be key to ensure a stable extended high-temperature operation.
- Open Access
- 17 January 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 38 (2) , 020803
Al-rich AlGaN based transistors
Research results for AlGaN-channel transistors are reviewed as they have progressed from low Al-content and long-channel devices to Al-rich and short-channel RF devices. Figure of merit (FOM) analysis shows encouraging comparisons relative to today’s state-of-the-art GaN devices for high Al-content and elevated temperatures. Critical electric field (EC), which fuels the AlGaN transistor FOM for high Al-composition, is not measured directly, but average gate-drain electric field at breakdown is substantially better in multiple reported AlGaN-channel devices compared to GaN. Challenges for AlGaN include the constraints arising from relatively low room temperature mobility dominated by ternary alloy scattering and the difficulty of making low-resistivity Ohmic contacts to high Al-content materials. Nevertheless, considerable progress has been made recently in the formation of low-resistivity Ohmic contacts to Al-rich AlGaN by using reverse compositional grading in the semiconductor, whereby a contact to a lower-Al alloy (or even to GaN) is made. Specific contact resistivity (ρc) approaching ρc ∼ 2 × 10−6 Ω cm2 to AlGaN devices with 70% Al-content in the channel has been reported. Along with scaling of the channel length and tailoring of the threshold voltage, this has enabled a dramatic increase in the current density, which has now reached 0.6 A/mm. Excellent ION/IOFF current ratios have been reported for Schottky-gated structures, in some cases exceeding 109. Encouraging RF performance in Al-rich transistors has been reported as well, with fT and fmax demonstrated in the tens of gigahertz range for devices with less than 150 nm gates. Al-rich transistors have also shown lesser current degradation over temperature than GaN in extreme high-temperature environments up to 500 °C, while maintaining ION/IOFF ratios of ∼106 at 500 °C. Finally, enhancement-mode devices along with initial reliability and radiation results have been reported for Al-rich AlGaN transistors. The Al-rich transistors promise to be a very broad and exciting field with much more progress expected in the coming years as this technology matures.
- 17 January 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 38 (2) , 020803
Open AccessAl-rich AlGaN based transistors
Research results for AlGaN-channel transistors are reviewed as they have progressed from low Al-content and long-channel devices to Al-rich and short-channel RF devices. Figure of merit (FOM) analysis shows encouraging comparisons relative to today’s state-of-the-art GaN devices for high Al-content and elevated temperatures. Critical electric field (EC), which fuels the AlGaN transistor FOM for high Al-composition, is not measured directly, but average gate-drain electric field at breakdown is substantially better in multiple reported AlGaN-channel devices compared to GaN. Challenges for AlGaN include the constraints arising from relatively low room temperature mobility dominated by ternary alloy scattering and the difficulty of making low-resistivity Ohmic contacts to high Al-content materials. Nevertheless, considerable progress has been made recently in the formation of low-resistivity Ohmic contacts to Al-rich AlGaN by using reverse compositional grading in the semiconductor, whereby a contact to a lower-Al alloy (or even to GaN) is made. Specific contact resistivity (ρc) approaching ρc ∼ 2 × 10−6 Ω cm2 to AlGaN devices with 70% Al-content in the channel has been reported. Along with scaling of the channel length and tailoring of the threshold voltage, this has enabled a dramatic increase in the current density, which has now reached 0.6 A/mm. Excellent ION/IOFF current ratios have been reported for Schottky-gated structures, in some cases exceeding 109. Encouraging RF performance in Al-rich transistors has been reported as well, with fT and fmax demonstrated in the tens of gigahertz range for devices with less than 150 nm gates. Al-rich transistors have also shown lesser current degradation over temperature than GaN in extreme high-temperature environments up to 500 °C, while maintaining ION/IOFF ratios of ∼106 at 500 °C. Finally, enhancement-mode devices along with initial reliability and radiation results have been reported for Al-rich AlGaN transistors. The Al-rich transistors promise to be a very broad and exciting field with much more progress expected in the coming years as this technology matures.
- Open Access
- 16 January 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 38 (2) , 020802
Plasma etching of wide bandgap and ultrawide bandgap semiconductors
The precise patterning of front-side mesas, backside vias, and selective removal of ternary alloys are all needed for power device fabrication in the various wide bandgap (AlGaN/GaN, SiC) and ultrawide bandgap (high Al-content alloys, boron nitride, Ga2O3, diamond) semiconductor technologies. The plasma etching conditions used are generally ion-assisted because of the strong bond strengths in these materials, and this creates challenges for the choice of masks in order to have sufficient selectivity over the semiconductor and to avoid mask erosion and micromasking issues. It can also be challenging to achieve practical etch rates without creating excessive damage in the patterned surface. The authors review the optimum choices for plasma chemistries for each of the semiconductors and acknowledge the pioneering work of John Coburn, who first delineated the ion-assisted etch mechanism.
- 16 January 2020
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 38 (2) , 020802
Open AccessPlasma etching of wide bandgap and ultrawide bandgap semiconductors
The precise patterning of front-side mesas, backside vias, and selective removal of ternary alloys are all needed for power device fabrication in the various wide bandgap (AlGaN/GaN, SiC) and ultrawide bandgap (high Al-content alloys, boron nitride, Ga2O3, diamond) semiconductor technologies. The plasma etching conditions used are generally ion-assisted because of the strong bond strengths in these materials, and this creates challenges for the choice of masks in order to have sufficient selectivity over the semiconductor and to avoid mask erosion and micromasking issues. It can also be challenging to achieve practical etch rates without creating excessive damage in the patterned surface. The authors review the optimum choices for plasma chemistries for each of the semiconductors and acknowledge the pioneering work of John Coburn, who first delineated the ion-assisted etch mechanism.
- 31 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 32 (4) , 473-477
Extreme Temperature Operation of Ultra-Wide Bandgap AlGaN High Electron Mobility Transistors
High Aluminum content channel (Al0.85Ga0.15N/Al-0.7Ga0.3N) High Electron Mobility Transistors (HEMTs) were operated from room temperature to 500∘C in ambient. The devices exhibited only moderate reduction, 58%, in on-state forward current. Gate lag measurements at 100 kHz and 10% duty only showed a slight reduction in pulsed current from DC at 500∘C and high gate voltages. Interfacial trap densities were 2 × 1011 over the range 25-300 ∘C and 3 × 1012 cm-2 from 300-500∘C from the subthreshold swing. These low interfacial trap densities and the near ideal gate lag measurement indicate high-quality epi layers. The insulating properties of the barrier layer led to low gate induced drain leakage current of 10-12 A/mm and 10-8 A/mm at 25 and 500∘C, respectively. Low leakage current was enabled by the high Schottky barrier of the Ni/Au gate, 1.1 eV and 3.3 eV at 25 and 500∘C, respectively. These properties of the AlGaN channel HEMTs demonstrate their potential for high power and high temperature operation.
- 31 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 32 (4) , 473-477
Extreme Temperature Operation of Ultra-Wide Bandgap AlGaN High Electron Mobility Transistors
High Aluminum content channel (Al0.85Ga0.15N/Al-0.7Ga0.3N) High Electron Mobility Transistors (HEMTs) were operated from room temperature to 500∘C in ambient. The devices exhibited only moderate reduction, 58%, in on-state forward current. Gate lag measurements at 100 kHz and 10% duty only showed a slight reduction in pulsed current from DC at 500∘C and high gate voltages. Interfacial trap densities were 2 × 1011 over the range 25-300 ∘C and 3 × 1012 cm-2 from 300-500∘C from the subthreshold swing. These low interfacial trap densities and the near ideal gate lag measurement indicate high-quality epi layers. The insulating properties of the barrier layer led to low gate induced drain leakage current of 10-12 A/mm and 10-8 A/mm at 25 and 500∘C, respectively. Low leakage current was enabled by the high Schottky barrier of the Ni/Au gate, 1.1 eV and 3.3 eV at 25 and 500∘C, respectively. These properties of the AlGaN channel HEMTs demonstrate their potential for high power and high temperature operation.
- Open Access
- 29 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 7 (1) , 444-452
Operation Up to 500 °C of Al0.85Ga0.15N/Al0.7Ga0.3N High Electron Mobility Transistors
- 29 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 7 (1) , 444-452
Open AccessOperation Up to 500 °C of Al0.85Ga0.15N/Al0.7Ga0.3N High Electron Mobility Transistors
- 18 March 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (11) , 112104
Enhancement-mode Al0.85Ga0.15N/Al0.7Ga0.3N high electron mobility transistor with fluorine treatment
Enhancement-mode Al0.7Ga0.3N-channel high electron mobility transistors (HEMTs) were achieved through a combination of recessed etching and fluorine ion deposition to shift the threshold voltage (VTH) relative to depletion-mode devices by +5.6 V to VTH = +0.5 V. Accounting for the threshold voltage shift (ΔVTH), current densities of approximately 30 to 35 mA/mm and transconductance values of 13 mS/mm were achieved for both the control and enhancement mode devices at gate biases of 1 V and 6.6 V, respectively. Little hysteresis was observed for all devices, with voltage offsets of 20 mV at drain currents of 1.0 × 10−3 mA/mm. Enhancement-mode devices exhibited slightly higher turn-on voltages (+0.38 V) for forward bias gate currents. Piecewise evaluation of a threshold voltage model indicated a ΔVTH of +3.3 V due to a gate recess etching of 12 nm and an additional +2.3 V shift due to fluorine ions near the AlGaN surface.
- 18 March 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 114 (11) , 112104
Enhancement-mode Al0.85Ga0.15N/Al0.7Ga0.3N high electron mobility transistor with fluorine treatment
Enhancement-mode Al0.7Ga0.3N-channel high electron mobility transistors (HEMTs) were achieved through a combination of recessed etching and fluorine ion deposition to shift the threshold voltage (VTH) relative to depletion-mode devices by +5.6 V to VTH = +0.5 V. Accounting for the threshold voltage shift (ΔVTH), current densities of approximately 30 to 35 mA/mm and transconductance values of 13 mS/mm were achieved for both the control and enhancement mode devices at gate biases of 1 V and 6.6 V, respectively. Little hysteresis was observed for all devices, with voltage offsets of 20 mV at drain currents of 1.0 × 10−3 mA/mm. Enhancement-mode devices exhibited slightly higher turn-on voltages (+0.38 V) for forward bias gate currents. Piecewise evaluation of a threshold voltage model indicated a ΔVTH of +3.3 V due to a gate recess etching of 12 nm and an additional +2.3 V shift due to fluorine ions near the AlGaN surface.
- 1 March 2019
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 37 (2)
Enhancement-mode AlGaN channel high electron mobility transistor enabled by p-AlGaN gate
This work exhibits the ability to shift the threshold voltage of an Al0.45Ga0.55N/Al0.3Ga0.7N high electron mobility transistor through the implementation of a 100 nm thick p-Al0.3Ga0.7N gate. A maximum threshold voltage of +0.3 V was achieved with a 3 μm gate length. In addition to achieving enhancement-mode operation, this work also shows the capability to obtain high saturated drain current (>50 mA/mm), no gate hysteresis, high ION,MAX/IOFF,MIN ratio of >109, and exceptionally low gate leakage current of 10−6 mA/mm even under high forward bias of Vgs = 8 V.
- 1 March 2019
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 37 (2)
Enhancement-mode AlGaN channel high electron mobility transistor enabled by p-AlGaN gate
This work exhibits the ability to shift the threshold voltage of an Al0.45Ga0.55N/Al0.3Ga0.7N high electron mobility transistor through the implementation of a 100 nm thick p-Al0.3Ga0.7N gate. A maximum threshold voltage of +0.3 V was achieved with a 3 μm gate length. In addition to achieving enhancement-mode operation, this work also shows the capability to obtain high saturated drain current (>50 mA/mm), no gate hysteresis, high ION,MAX/IOFF,MIN ratio of >109, and exceptionally low gate leakage current of 10−6 mA/mm even under high forward bias of Vgs = 8 V.