Yi-Cheng Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yi-Cheng Lin has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Yao-Wen Hsu
Graduate Institute of Communication Engineering, National Taiwan University, Taipei, Taiwan
4 shared publications - Hsin-Chia Lu
Graduate Institute of Electronics Engineering and Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan
3 shared publications - Kun-You Lin
Graduate Institute of Communication Engineering, National Taiwan University, Taipei, Taiwan
3 shared publications Shih-Kai Lin
Graduate Institute of Communication Engineering, National Taiwan University, Taipei, Taiwan
3 shared publicationsYu-Chun Lu
Graduate Institute of Communication Engineering, National Taiwan University, Taipei, Taiwan
3 shared publicationsHsueh-Jyh Li
Graduate Institute of Communication Engineering, Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan
2 shared publications
Latest Publications
- Open Access
- 27 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 4221-4230
A Printed Balun-Fed Dipole Antenna and Its Simple Design for Dual-Polarized Operations
This paper presents comprehensive study on a novel compact balun-fed dipole antenna (BFDA) and its simple PCB design for dual-polarized operations. Unlike conventional printed baluns that only function as feed transitions, the proposed embedded balun is electromagnetically coupled to the radiators and actively participates in the resonance formation and bandwidth enhancement. The antenna integrates a balun-based feed with printed dipole patches through connecting vias, enabling a compact form factor, wide impedance bandwidth, and promising radiation performance. The working principle of the balun-embedded feed and its effects on impedance bandwidth, port isolation, and polarization purity is provided. For dual-polarized operations, two orthogonally oriented BFDAs are simply co-located within the same aperture, achieving a very miniature area without compromising the isolation. The fabricated prototype exhibits a port-to-port isolation exceeding 40 dB across 12 GHz to 15 GHz. The impedance bandwidth is above 23% under a compact antenna volume of 0.36λ0× 0.36λ0 × 0.09λ0. The measured radiation patterns exhibit stable and broadband characteristics, where the co-polarization levels have a good agreement with simulations while some discrepancies for the cross-polarization levels are observed. A figure of merit (FoM) that combines antenna volume, impedance bandwidth, and port isolation is introduced to facilitate comparison among dual-polarized antennas with similar design objectives. These results demonstrate that the presented antenna has great practical potential for space-constrained, high-performance, and cost-effective wireless applications.
- 27 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 4221-4230
Open AccessA Printed Balun-Fed Dipole Antenna and Its Simple Design for Dual-Polarized Operations
This paper presents comprehensive study on a novel compact balun-fed dipole antenna (BFDA) and its simple PCB design for dual-polarized operations. Unlike conventional printed baluns that only function as feed transitions, the proposed embedded balun is electromagnetically coupled to the radiators and actively participates in the resonance formation and bandwidth enhancement. The antenna integrates a balun-based feed with printed dipole patches through connecting vias, enabling a compact form factor, wide impedance bandwidth, and promising radiation performance. The working principle of the balun-embedded feed and its effects on impedance bandwidth, port isolation, and polarization purity is provided. For dual-polarized operations, two orthogonally oriented BFDAs are simply co-located within the same aperture, achieving a very miniature area without compromising the isolation. The fabricated prototype exhibits a port-to-port isolation exceeding 40 dB across 12 GHz to 15 GHz. The impedance bandwidth is above 23% under a compact antenna volume of 0.36λ0× 0.36λ0 × 0.09λ0. The measured radiation patterns exhibit stable and broadband characteristics, where the co-polarization levels have a good agreement with simulations while some discrepancies for the cross-polarization levels are observed. A figure of merit (FoM) that combines antenna volume, impedance bandwidth, and port isolation is introduced to facilitate comparison among dual-polarized antennas with similar design objectives. These results demonstrate that the presented antenna has great practical potential for space-constrained, high-performance, and cost-effective wireless applications.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3166-3179
A Novel Design of 60-GHz Full-Polarimetric Radar for Miniature Sensor Applications
This article presents the design, implementation, and validation of a novel 60-GHz full-polarimetric radar module tailored for miniature radar sensors. Existing 60-GHz radar sensors detect targets through co-polarized antennas that may overlook crucial cross-polarized backscattered signals. A polarimetric radar is superior on the polarization diversity, but it suffers from the cost and the design complexity in a larger form factor. Compact design of a short-range radar sensor with full-polarimetric operation is highly desirable while full of challenges. In this study, we propose a novel design for 60-GHz radar sensors enabling the full-polarimetric operation within a compact 7.6 $\times$ 5.1 mm antenna footprint. The design relies on co-located dual-polarized antennas and a simplest 2 Tx and 2 Rx configuration. The proposed antenna module was fabricated and measured, demonstrating excellent performance in radiation pattern stability, polarization discrimination, and port isolation. For radar system design and implementation, we incorporate a commercial radar SoC and the self-developed processing algorithms to capture a complete four-channel scattering matrix. System measurements are conducted and validated through range-Doppler (RD) maps and Krogager decomposition. The results demonstrate the ability to distinguish between different target scattering mechanisms, achieving a decent confidence level of recognition rate. The proposed full-polarimetric radar module design offers a robust and feasible solution for 60-GHz radar sensors, paving the way for advancements in radar polarimetry of compact sensor technologies.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3166-3179
A Novel Design of 60-GHz Full-Polarimetric Radar for Miniature Sensor Applications
This article presents the design, implementation, and validation of a novel 60-GHz full-polarimetric radar module tailored for miniature radar sensors. Existing 60-GHz radar sensors detect targets through co-polarized antennas that may overlook crucial cross-polarized backscattered signals. A polarimetric radar is superior on the polarization diversity, but it suffers from the cost and the design complexity in a larger form factor. Compact design of a short-range radar sensor with full-polarimetric operation is highly desirable while full of challenges. In this study, we propose a novel design for 60-GHz radar sensors enabling the full-polarimetric operation within a compact 7.6 $\times$ 5.1 mm antenna footprint. The design relies on co-located dual-polarized antennas and a simplest 2 Tx and 2 Rx configuration. The proposed antenna module was fabricated and measured, demonstrating excellent performance in radiation pattern stability, polarization discrimination, and port isolation. For radar system design and implementation, we incorporate a commercial radar SoC and the self-developed processing algorithms to capture a complete four-channel scattering matrix. System measurements are conducted and validated through range-Doppler (RD) maps and Krogager decomposition. The results demonstrate the ability to distinguish between different target scattering mechanisms, achieving a decent confidence level of recognition rate. The proposed full-polarimetric radar module design offers a robust and feasible solution for 60-GHz radar sensors, paving the way for advancements in radar polarimetry of compact sensor technologies.
- 16 October 2024
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 59 (10)
Realizing Orthogonal Modes in Compact Cavity‐Backed Dual‐Polarized Antenna Through Simple Feeding Structures for Millimeter‐Wave AiP Applications
This paper presents a dual‐polarized cavity‐backed antenna designed for mm‐wave applications, featuring simple feeding structures with a high‐isolation for 60 GHz compact AiP applications. The dual‐polarization design relies on two separate feed ports that excite two orthogonal modes within the same resonant cavity, achieving very high port isolation of up to 40 dB over the entire band. We conducted a detail analysis of the antenna, including its working principles and parametric studies. For verification, we fabricated an antenna test kit using standard printed process on substrates and measured the kit from the back‐side of a GSG probing platform. The proposed antenna demonstrates a wide impedance bandwidth, stable radiation patterns, very low cross‐polarization levels, and a high radiation efficiency. The co‐located cavity‐backed design ensures the compactness and facilitates easy integration with ICs in a very small AiP module. These features make the proposed antenna highly suitable for 60 GHz AiP applications, such as high‐data‐rate wireless communication and mmW polarimetric radar systems.
- 16 October 2024
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 59 (10)
Realizing Orthogonal Modes in Compact Cavity‐Backed Dual‐Polarized Antenna Through Simple Feeding Structures for Millimeter‐Wave AiP Applications
This paper presents a dual‐polarized cavity‐backed antenna designed for mm‐wave applications, featuring simple feeding structures with a high‐isolation for 60 GHz compact AiP applications. The dual‐polarization design relies on two separate feed ports that excite two orthogonal modes within the same resonant cavity, achieving very high port isolation of up to 40 dB over the entire band. We conducted a detail analysis of the antenna, including its working principles and parametric studies. For verification, we fabricated an antenna test kit using standard printed process on substrates and measured the kit from the back‐side of a GSG probing platform. The proposed antenna demonstrates a wide impedance bandwidth, stable radiation patterns, very low cross‐polarization levels, and a high radiation efficiency. The co‐located cavity‐backed design ensures the compactness and facilitates easy integration with ICs in a very small AiP module. These features make the proposed antenna highly suitable for 60 GHz AiP applications, such as high‐data‐rate wireless communication and mmW polarimetric radar systems.
- Open Access
- 1 September 2024
- Published by American Physiological Society in Advances in Physiology Education
- Vol. 48 (3) , 446-454
A partially flipped physiology classroom improves the deep learning approach of medical students
In this article, we compare the impact of the partially flipped classroom (PFC) and the traditional lecture classroom (TLC) in a physiology course on medical students’ learning approaches. We found that the PFC benefited students by significantly enhancing their deep learning motive, strategy, and approach, which was good for them. However, the TLC model only improved the surface learning motive and approach.
- 1 September 2024
- Published by American Physiological Society in Advances in Physiology Education
- Vol. 48 (3) , 446-454
Open AccessA partially flipped physiology classroom improves the deep learning approach of medical students
In this article, we compare the impact of the partially flipped classroom (PFC) and the traditional lecture classroom (TLC) in a physiology course on medical students’ learning approaches. We found that the PFC benefited students by significantly enhancing their deep learning motive, strategy, and approach, which was good for them. However, the TLC model only improved the surface learning motive and approach.
- 4 July 2024
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 98, 441-471
The mystic role of high-entropy designs in rechargeable metal-ion batteries: A review
- 4 July 2024
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 98, 441-471
The mystic role of high-entropy designs in rechargeable metal-ion batteries: A review
- 18 April 2022
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 147, 106722
Study on Na-Ga-F compound in CIGSSe absorber prepared by CuGa-NaF target
- 18 April 2022
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 147, 106722
Study on Na-Ga-F compound in CIGSSe absorber prepared by CuGa-NaF target
- Top Cited Papers
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 980-999
38-GHz Phased Array Transmitter and Receiver Based on Scalable Phased Array Modules With Endfire Antenna Arrays for 5G MMW Data Links
This article presents the 38-GHz phased array 32-element Tx and 16-element Rx with 2-GHz IF and 5-GHz LO for fifth-generation (5G) millimeter-wave (MMW) communications. The Tx and Rx beamformers and upconverters/downconverters are fabricated in 65-nm CMOS. The PAs and LNAs near antenna ends are fabricated in 0.15-μm GaAs pHEMT. The eight-element Tx and four-element Rx phased array printed circuit board (PCB) modules integrated with multiple integrated circuits (ICs) and endfire antennas are implemented as unit cells. Four pieces of Tx modules are vertically stacked to construct an 8 x 4 brick array (planar array), while four Rx modules are to construct a 4 x 4 array. According to 38-GHz over-the-air (OTA) measurements, the 32-element Tx shows 47.5-dBm equivalent isotropic radiated power (EIRP) at OP1 dB with -35.2-dB image rejection ratio (IMRR) and -37.4-dB x8 LORR. The 16-element Rx at 38 GHz shows -4-dBm OP1 dB with -28-dB IMRR and -36.6-dB LORR. The Tx and Rx support the beam scanning around ±60° azimuth and ±30° elevation planes. The Tx-to-Rx wireless data link demonstrates 64 quadrature amplitude modulation (QAM)/400 M-BR, 256 QAM/200 M-BR, and 512 QAM/100 M-BR in 20 m. To the best of our knowledge, this work is the first 5G 37-/39-GHz phased array Tx/Rx using the scalable brick array configuration and demonstrating competitive performances compared with previous works.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 980-999
Top Cited Papers38-GHz Phased Array Transmitter and Receiver Based on Scalable Phased Array Modules With Endfire Antenna Arrays for 5G MMW Data Links
This article presents the 38-GHz phased array 32-element Tx and 16-element Rx with 2-GHz IF and 5-GHz LO for fifth-generation (5G) millimeter-wave (MMW) communications. The Tx and Rx beamformers and upconverters/downconverters are fabricated in 65-nm CMOS. The PAs and LNAs near antenna ends are fabricated in 0.15-μm GaAs pHEMT. The eight-element Tx and four-element Rx phased array printed circuit board (PCB) modules integrated with multiple integrated circuits (ICs) and endfire antennas are implemented as unit cells. Four pieces of Tx modules are vertically stacked to construct an 8 x 4 brick array (planar array), while four Rx modules are to construct a 4 x 4 array. According to 38-GHz over-the-air (OTA) measurements, the 32-element Tx shows 47.5-dBm equivalent isotropic radiated power (EIRP) at OP1 dB with -35.2-dB image rejection ratio (IMRR) and -37.4-dB x8 LORR. The 16-element Rx at 38 GHz shows -4-dBm OP1 dB with -28-dB IMRR and -36.6-dB LORR. The Tx and Rx support the beam scanning around ±60° azimuth and ±30° elevation planes. The Tx-to-Rx wireless data link demonstrates 64 quadrature amplitude modulation (QAM)/400 M-BR, 256 QAM/200 M-BR, and 512 QAM/100 M-BR in 20 m. To the best of our knowledge, this work is the first 5G 37-/39-GHz phased array Tx/Rx using the scalable brick array configuration and demonstrating competitive performances compared with previous works.
- 1 March 2019
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 779, 347-359
Interfacial reactions in In/Bi2Se3, In/Bi2Te3 and In/Bi2(Se0.2Te0.8)3 couples
- 1 March 2019
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 779, 347-359
Interfacial reactions in In/Bi2Se3, In/Bi2Te3 and In/Bi2(Se0.2Te0.8)3 couples
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1196-1199
A K-band area-saving marchand balun integrated with low-noise amplifier in 0.18-μm CMOS
A new topology of Marchand balun with a compact area is demonstrated in 0.18-μm CMOS technology. The lengths of coupled windings are reduced significantly from quarter wavelength compared to the conventional ones. The coupling coefficient between windings is designed for specific impedance matching. The S-parameters of the differential outputs are tested. The proposed balun is first fabricated without and with matching networks to verify the properties, and later integrated with a single-input differential-output low-noise amplifier (SIDO LNA). It is shown that the proposed balun is well suited to integrate with an amplifier that it not only serves as a DC-block but also provides a compact impedance matching. The balun shows an insertion loss within 6 dB from 20-30 GHz, amplitude and phase imbalances within 0.4 dB and 4 o , respectively. The LNA shows a differential gain of 15.8 dB and noise figure (NF) of 6.4 dB at 25 GHz.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1196-1199
A K-band area-saving marchand balun integrated with low-noise amplifier in 0.18-μm CMOS
A new topology of Marchand balun with a compact area is demonstrated in 0.18-μm CMOS technology. The lengths of coupled windings are reduced significantly from quarter wavelength compared to the conventional ones. The coupling coefficient between windings is designed for specific impedance matching. The S-parameters of the differential outputs are tested. The proposed balun is first fabricated without and with matching networks to verify the properties, and later integrated with a single-input differential-output low-noise amplifier (SIDO LNA). It is shown that the proposed balun is well suited to integrate with an amplifier that it not only serves as a DC-block but also provides a compact impedance matching. The balun shows an insertion loss within 6 dB from 20-30 GHz, amplitude and phase imbalances within 0.4 dB and 4 o , respectively. The LNA shows a differential gain of 15.8 dB and noise figure (NF) of 6.4 dB at 25 GHz.
- 31 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (12) , 6282-6289
Dual-Polarized Quasi Yagi–Uda Antennas With Endfire Radiation for Millimeter-Wave MIMO Terminals
This paper presents a novel design of compact dualpolarized multi-input and multi-output (MIMO) antennas with endfire radiation for millimeter-wave wireless applications. The low-cost printed circuit board process serves as the basis for the design, fabrication, and measurement of the proposed dualpolarized quasi Yagi-Uda antennas. Addressing the potential antenna locations in a mobile terminal, this paper investigates both the corner and the lateral design of antenna modules. Each design incorporates dual-port dual-polarized antennas co-located in a compact area. The lateral design is further extended to a linear 1×4 array for high-gain and phased-scanning operation. Experimental results show that the proposed compact dual-polarized quasi Yagi-Uda antennas are very suitable for MIM terminals of next-generation (5G) mobile communications.
- 31 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (12) , 6282-6289
Dual-Polarized Quasi Yagi–Uda Antennas With Endfire Radiation for Millimeter-Wave MIMO Terminals
This paper presents a novel design of compact dualpolarized multi-input and multi-output (MIMO) antennas with endfire radiation for millimeter-wave wireless applications. The low-cost printed circuit board process serves as the basis for the design, fabrication, and measurement of the proposed dualpolarized quasi Yagi-Uda antennas. Addressing the potential antenna locations in a mobile terminal, this paper investigates both the corner and the lateral design of antenna modules. Each design incorporates dual-port dual-polarized antennas co-located in a compact area. The lateral design is further extended to a linear 1×4 array for high-gain and phased-scanning operation. Experimental results show that the proposed compact dual-polarized quasi Yagi-Uda antennas are very suitable for MIM terminals of next-generation (5G) mobile communications.