Diana Alejandra Estenoz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Diana Alejandra Estenoz has a total of 161 co-authors. Here are the top co-authors by number of shared publications:
Natalia Casis
Facultad de Ingeniería Química Universidad Nacional del Litoral (UNL) Santa Fe Argentina
12 shared publicationsMaría Eugenia Taverna
INTEC (Universidad Nacional del Litoral – CONICET), Santa Fe, Argentina
9 shared publications- Carlos Busatto
INTEC (UNL-CONICET)
8 shared publications - Graciela Morales
Centro de Investigación en Química Aplicada
8 shared publications - Maria Soledad Peresin
Sustainable Bio-Based Materials Laboratory, College of Forestry, Wildlife and Environment, Auburn University, Auburn, USA
8 shared publications - Junyong Zhu
USDA Forest Products Lab, Madison, WI 53726, USA
7 shared publications
Latest Publications
- 21 August 2026
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (11) , 8319-8333
Synthesis of New Polysilsesquioxane‐Reinforced Renewable Benzoxazine Hybrid Thermosets With Improved Thermal Performance
A novel renewable silane‐based tri‐functional benzoxazine (RES‐3aptms) was successfully obtained from resveratrol, 3‐aminopropyltrimethoxysilane and paraformaldehyde and characterized by Nuclear Magnetic Resonance Spectroscopy. The chemical reaction conditions for the hydrolysis and condensation of the alkoxysilane groups in RES‐3aptms were successfully optimized, enabling controlled sol–gel and oxazine ring‐opening processes. Subsequently, a series of novel silsesquioxane‐based renewable tri‐functional resin systems were prepared by combining the precursor with either a resveratrol‐based epoxy resin (RES‐ech) or a resveratrol‐ and furfurylamine‐based benzoxazine (RES‐fa) at a 1:1 molar ratio. The thermal and morphological properties of these materials were evaluated, showing a lamellar nano‐structural morphology of outstanding thermal resistance, high char yields (~80%, at 800°C under N 2 ), and glass transition temperatures (Tgs) around 300°C. Regarding contact angle measurements, the polybenzoxazines and the benzoxazine/benzoxazine copolymer revealed higher hydrophobic surfaces (around 85°) than the benzoxazine/epoxy copolymer (around 78°). The resveratrol‐based thermosets demonstrated that reactive incorporation of polysilsesquioxane structures improves char and thermal resistance integrity, suggesting potential applications for high‐performance components.
- 21 August 2026
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (11) , 8319-8333
Synthesis of New Polysilsesquioxane‐Reinforced Renewable Benzoxazine Hybrid Thermosets With Improved Thermal Performance
A novel renewable silane‐based tri‐functional benzoxazine (RES‐3aptms) was successfully obtained from resveratrol, 3‐aminopropyltrimethoxysilane and paraformaldehyde and characterized by Nuclear Magnetic Resonance Spectroscopy. The chemical reaction conditions for the hydrolysis and condensation of the alkoxysilane groups in RES‐3aptms were successfully optimized, enabling controlled sol–gel and oxazine ring‐opening processes. Subsequently, a series of novel silsesquioxane‐based renewable tri‐functional resin systems were prepared by combining the precursor with either a resveratrol‐based epoxy resin (RES‐ech) or a resveratrol‐ and furfurylamine‐based benzoxazine (RES‐fa) at a 1:1 molar ratio. The thermal and morphological properties of these materials were evaluated, showing a lamellar nano‐structural morphology of outstanding thermal resistance, high char yields (~80%, at 800°C under N 2 ), and glass transition temperatures (Tgs) around 300°C. Regarding contact angle measurements, the polybenzoxazines and the benzoxazine/benzoxazine copolymer revealed higher hydrophobic surfaces (around 85°) than the benzoxazine/epoxy copolymer (around 78°). The resveratrol‐based thermosets demonstrated that reactive incorporation of polysilsesquioxane structures improves char and thermal resistance integrity, suggesting potential applications for high‐performance components.
- Open Access
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32652-32665
Dual Functionality of Biobased Bacterial Nanocellulose as Polymer Additive for Drilling Operations and Post-Drilling Filter Cake Removal
This work explores bacterial nanocellulose (BNC) as a biobased and sustainable polymeric additive for water-based drilling fluids (WBMs). BNC was isolated from the cellulosic byproduct of kombucha tea production, yielding highly pure cellulose with high crystallinity and mechanical stability. WBMs prepared with BNC exhibited higher viscosities and similar pseudoplastic behavior compared with those formulated using xanthan gum (XGD). Thermal aging at 90 °C showed that BNC-based fluids retained around 80% of their initial viscosity, confirming superior thermal stability and longer service life. Although slightly higher filtrate volumes were recorded, the overall rheological performance was enhanced. Additionally, enzymatic treatment of BNC enables controlled viscosity reduction, which may facilitate fluid management during cementing operations. This dual functionality─high performance during drilling coupled with controlled postuse degradability─supports a circular materials strategy by reducing polymer consumption and minimizing waste generation. In this context, the proposed approach contributes to sustainable development goal (SDG) 12: Responsible Consumption and Production and SDG 9: Industry, Innovation and Infrastructure, through the development of sustainable materials for industrial applications. Overall, these results highlight BNC as a promising multifunctional polymer and provide initial insights for the development of alternative sustainable drilling fluid formulations.
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32652-32665
Open AccessDual Functionality of Biobased Bacterial Nanocellulose as Polymer Additive for Drilling Operations and Post-Drilling Filter Cake Removal
This work explores bacterial nanocellulose (BNC) as a biobased and sustainable polymeric additive for water-based drilling fluids (WBMs). BNC was isolated from the cellulosic byproduct of kombucha tea production, yielding highly pure cellulose with high crystallinity and mechanical stability. WBMs prepared with BNC exhibited higher viscosities and similar pseudoplastic behavior compared with those formulated using xanthan gum (XGD). Thermal aging at 90 °C showed that BNC-based fluids retained around 80% of their initial viscosity, confirming superior thermal stability and longer service life. Although slightly higher filtrate volumes were recorded, the overall rheological performance was enhanced. Additionally, enzymatic treatment of BNC enables controlled viscosity reduction, which may facilitate fluid management during cementing operations. This dual functionality─high performance during drilling coupled with controlled postuse degradability─supports a circular materials strategy by reducing polymer consumption and minimizing waste generation. In this context, the proposed approach contributes to sustainable development goal (SDG) 12: Responsible Consumption and Production and SDG 9: Industry, Innovation and Infrastructure, through the development of sustainable materials for industrial applications. Overall, these results highlight BNC as a promising multifunctional polymer and provide initial insights for the development of alternative sustainable drilling fluid formulations.
- Open Access
- 15 October 2025
- Published by MDPI AG in Pharmaceutics
- Vol. 17 (10) , 1335
Expanded Nanofibrous Polymeric Mats Incorporating Tetracycline-Loaded Silica Mesoporous Nanoparticles for Antimicrobial Applications
Background/Objectives: In this work, expanded electrospun poly(vinyl alcohol) (PVA) nanofiber mats incorporating tetracycline-loaded mesoporous silica nanoparticles (MSNs) were fabricated for antimicrobial wound dressing applications. Methods: MSNs with high surface area were synthesized and efficiently loaded with tetracycline, achieving sustained drug release. These nanoparticles were then embedded into both conventional (2D) and gas-expanded (3D) electrospun PVA mats. Results: The gas-foaming process significantly enhanced the mat’s thickness, promoting improved nanoparticle loading and diffusion properties. Physicochemical characterization confirmed the structural integrity, thermal stability, and successful drug incorporation within the hybrid scaffolds. Antimicrobial tests against Escherichia coli and Staphylococcus aureus demonstrated excellent bactericidal effects, with superior inhibition observed in 3D mats due to their higher drug loading capacity and faster drug release related to the expanded structure. Conclusions: These results highlight the potential of combining electrospinning, gas expansion, and nanocarriers to engineer advanced, drug-loaded fibrous scaffolds for wound healing.
- 15 October 2025
- Published by MDPI AG in Pharmaceutics
- Vol. 17 (10) , 1335
Open AccessExpanded Nanofibrous Polymeric Mats Incorporating Tetracycline-Loaded Silica Mesoporous Nanoparticles for Antimicrobial Applications
Background/Objectives: In this work, expanded electrospun poly(vinyl alcohol) (PVA) nanofiber mats incorporating tetracycline-loaded mesoporous silica nanoparticles (MSNs) were fabricated for antimicrobial wound dressing applications. Methods: MSNs with high surface area were synthesized and efficiently loaded with tetracycline, achieving sustained drug release. These nanoparticles were then embedded into both conventional (2D) and gas-expanded (3D) electrospun PVA mats. Results: The gas-foaming process significantly enhanced the mat’s thickness, promoting improved nanoparticle loading and diffusion properties. Physicochemical characterization confirmed the structural integrity, thermal stability, and successful drug incorporation within the hybrid scaffolds. Antimicrobial tests against Escherichia coli and Staphylococcus aureus demonstrated excellent bactericidal effects, with superior inhibition observed in 3D mats due to their higher drug loading capacity and faster drug release related to the expanded structure. Conclusions: These results highlight the potential of combining electrospinning, gas expansion, and nanocarriers to engineer advanced, drug-loaded fibrous scaffolds for wound healing.
- 9 July 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (26)
Thiol‐Ene Coupling Reaction for Functionalization of Nonactivated Alkenes: Mechanism and Mathematical Model
This article is a continuation of Polo et al. In that article, we investigated the synthesis of an aminated methyl oleate through a photoinitiated thiol‐ene coupling reaction between cysteamine hydrochloride and cis methyl oleate in the presence of a photoinitiator. The present article develops a mathematical model for simulating Experiment 11 of Polo et al. The new model extends the reaction mechanism proposed by Chatgilialoglu et al. to enable generation of high molar mass by‐products; and it contains 16 kinetic constants. Nine of that constants were directly adopted from literature, five other constants were estimated from reduced ad hoc experiments, and the last two constants were estimated by fitting the complete model predictions to the available measurements. The model adequately predicts the normalized 1 H‐NMR areas due to vinyl protons, the final weight‐average molar mass, and the final concentration of desired product. The simulation results suggest an almost constant concentration of dissolved cysteamine along the reaction, and a rapid isomerization of the cis methyl oleate reagent into the trans‐ isomer. The desired product is generated following an approximately zero‐order kinetics. The generation of both low‐ and high‐molar mass by‐products reduces the selectivity of the reaction toward the desired product.
- 9 July 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (26)
Thiol‐Ene Coupling Reaction for Functionalization of Nonactivated Alkenes: Mechanism and Mathematical Model
This article is a continuation of Polo et al. In that article, we investigated the synthesis of an aminated methyl oleate through a photoinitiated thiol‐ene coupling reaction between cysteamine hydrochloride and cis methyl oleate in the presence of a photoinitiator. The present article develops a mathematical model for simulating Experiment 11 of Polo et al. The new model extends the reaction mechanism proposed by Chatgilialoglu et al. to enable generation of high molar mass by‐products; and it contains 16 kinetic constants. Nine of that constants were directly adopted from literature, five other constants were estimated from reduced ad hoc experiments, and the last two constants were estimated by fitting the complete model predictions to the available measurements. The model adequately predicts the normalized 1 H‐NMR areas due to vinyl protons, the final weight‐average molar mass, and the final concentration of desired product. The simulation results suggest an almost constant concentration of dissolved cysteamine along the reaction, and a rapid isomerization of the cis methyl oleate reagent into the trans‐ isomer. The desired product is generated following an approximately zero‐order kinetics. The generation of both low‐ and high‐molar mass by‐products reduces the selectivity of the reaction toward the desired product.
- Open Access
- 7 June 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (12) , 879
Improvement in Heat Transfer in Hydrocarbon and Geothermal Energy Coproduction Systems Using Carbon Quantum Dots: An Experimental and Modeling Approach
The main objective of this study is to improve heat transfer in hydrocarbon- and geothermal-energy coproduction systems using carbon quantum dots (CQDs). Two types of 0D nanoparticles (synthesized and commercial CQDs) were used for the formulation of nanofluids to increase the heat transfer from depleted wells for the coproduction of oil and electrical energy. The synthesized and commercial CQDs were characterized in terms of their morphology, zeta potential, density, size, and heat capacity. The nanofluids were prepared using brine from an oil well of interest and two types of CQDs. The effect of the CQDs on the thermophysical properties of the nanofluids was evaluated based on their thermal conductivity. In addition, a mathematical model based on heat transfer principles to predict the effect of nanofluids on the efficiency of the organic Rankine cycle (ORC) was implemented. The synthesized and commercial CQDs had particle sizes of 25 and 16 nm, respectively. Similarly, zeta potential values of 36 and 48 mV were obtained. Both CQDs have similar functional groups and UV absorption, and the fluorescence spectra show that the study CQDs have a maximum excitation–emission signal around 360–460 nm. The characterization of the nanofluids showed that the addition of 100, 300, and 500 mg/L of CQDs increased the thermal conductivity by 40, 50, and 60 %, respectively. However, the 1000 mg/L incorporated decreased the thermal conductivities of the nanofluids. The observed behavior can be attributed to the aggregate size of the nanoparticles. Furthermore, a new thermal conductivity model for CQD-based nanofluids was developed considering brine salinity, particle size distribution, and agglomeration effects. The model showed a remarkable fit with the experimental data and predicted the effect of the nanofluid concentration on the thermal conductivity and cycle efficiency. Coupled with an ORC cycle model, CQD concentrations of approximately 550 mg/L increased the cycle efficiency by approximately 13.8% and 18.6% for commercial and synthesized CQDs, respectively.
- 7 June 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (12) , 879
Open AccessImprovement in Heat Transfer in Hydrocarbon and Geothermal Energy Coproduction Systems Using Carbon Quantum Dots: An Experimental and Modeling Approach
The main objective of this study is to improve heat transfer in hydrocarbon- and geothermal-energy coproduction systems using carbon quantum dots (CQDs). Two types of 0D nanoparticles (synthesized and commercial CQDs) were used for the formulation of nanofluids to increase the heat transfer from depleted wells for the coproduction of oil and electrical energy. The synthesized and commercial CQDs were characterized in terms of their morphology, zeta potential, density, size, and heat capacity. The nanofluids were prepared using brine from an oil well of interest and two types of CQDs. The effect of the CQDs on the thermophysical properties of the nanofluids was evaluated based on their thermal conductivity. In addition, a mathematical model based on heat transfer principles to predict the effect of nanofluids on the efficiency of the organic Rankine cycle (ORC) was implemented. The synthesized and commercial CQDs had particle sizes of 25 and 16 nm, respectively. Similarly, zeta potential values of 36 and 48 mV were obtained. Both CQDs have similar functional groups and UV absorption, and the fluorescence spectra show that the study CQDs have a maximum excitation–emission signal around 360–460 nm. The characterization of the nanofluids showed that the addition of 100, 300, and 500 mg/L of CQDs increased the thermal conductivity by 40, 50, and 60 %, respectively. However, the 1000 mg/L incorporated decreased the thermal conductivities of the nanofluids. The observed behavior can be attributed to the aggregate size of the nanoparticles. Furthermore, a new thermal conductivity model for CQD-based nanofluids was developed considering brine salinity, particle size distribution, and agglomeration effects. The model showed a remarkable fit with the experimental data and predicted the effect of the nanofluid concentration on the thermal conductivity and cycle efficiency. Coupled with an ORC cycle model, CQD concentrations of approximately 550 mg/L increased the cycle efficiency by approximately 13.8% and 18.6% for commercial and synthesized CQDs, respectively.
- 23 February 2025
- Published by Taylor & Francis in Journal of Liquid Chromatography & Related Technologies
- Vol. 48 (11-15) , 294-301
Hydroxymethylation of a sodium lignosulfonate: molar mass distributions by SEC with dual detection
- 23 February 2025
- Published by Taylor & Francis in Journal of Liquid Chromatography & Related Technologies
- Vol. 48 (11-15) , 294-301
Hydroxymethylation of a sodium lignosulfonate: molar mass distributions by SEC with dual detection
- 23 February 2025
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 34 (10) , 1665-1675
Hybrid silica–sodium lignosulfonate nanoparticles for the controlled release of azadirachtin
- 23 February 2025
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 34 (10) , 1665-1675
Hybrid silica–sodium lignosulfonate nanoparticles for the controlled release of azadirachtin
- 31 October 2024
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 13 (12)
Thiol‐Ene Coupling Reaction for Functionalization of Non‐Activated Alkenes: An Experimental Study on the Chemistry of the Methyl Oleate Amination
This work investigates the functionalization of molecules with non‐activated internal double bonds via thiol‐ene coupling (TEC) reaction. A comprehensive study of the reaction between cysteamine hydrochloride (CAHC) and methyl oleate (MO) was carried out. A series of reactions were conducted under different operating conditions in order to assess their effect on conversion and selectivity. Different conditions were considered like the type of atmospheres and solvents, a portionwise addition of CAHC, reagents concentrations, and excess of CAHC. Maximum conversion and selectivity were reached under inert atmosphere, diluted conditions, ethanol as solvent, and the addition of CAHC at the beginning of the reaction with a molar ratio of CAHC/MO of 3/1. This provides an approach for analyzing more complex reaction systems.
- 31 October 2024
- Published by Wiley in Asian Journal of Organic Chemistry
- Vol. 13 (12)
Thiol‐Ene Coupling Reaction for Functionalization of Non‐Activated Alkenes: An Experimental Study on the Chemistry of the Methyl Oleate Amination
This work investigates the functionalization of molecules with non‐activated internal double bonds via thiol‐ene coupling (TEC) reaction. A comprehensive study of the reaction between cysteamine hydrochloride (CAHC) and methyl oleate (MO) was carried out. A series of reactions were conducted under different operating conditions in order to assess their effect on conversion and selectivity. Different conditions were considered like the type of atmospheres and solvents, a portionwise addition of CAHC, reagents concentrations, and excess of CAHC. Maximum conversion and selectivity were reached under inert atmosphere, diluted conditions, ethanol as solvent, and the addition of CAHC at the beginning of the reaction with a molar ratio of CAHC/MO of 3/1. This provides an approach for analyzing more complex reaction systems.
- Open Access
- 27 September 2024
- Published by IntechOpen
Application of Nanotechnology in the Petroleum Industry: A View from Rheology
The objective of this chapter is to demonstrate the use of rheology as a fundamental tool for fluid characterization in processes of the oil industry assisted by nanotechnology. In more detail, the chapter will present three important processes in the oil and gas industry: (i) increase the mobility and transport conditions of heavy and extra-heavy crude oil, (ii) improve the performance of drilling fluids, and (iii) improve polymer injection technology in enhanced recovery (EOR) processes, through the use of nanomaterials. To this end, steady-state rheometry and dynamic rheology are incorporated to understand the phenomena and relate the performance and microstructure of the fluids used. The content of the chapter presents interesting results of a disruptive technology of great importance to the energy industry in general. It will be of great technical contribution to the readers of the book.
- 27 September 2024
- Published by IntechOpen
Open AccessApplication of Nanotechnology in the Petroleum Industry: A View from Rheology
The objective of this chapter is to demonstrate the use of rheology as a fundamental tool for fluid characterization in processes of the oil industry assisted by nanotechnology. In more detail, the chapter will present three important processes in the oil and gas industry: (i) increase the mobility and transport conditions of heavy and extra-heavy crude oil, (ii) improve the performance of drilling fluids, and (iii) improve polymer injection technology in enhanced recovery (EOR) processes, through the use of nanomaterials. To this end, steady-state rheometry and dynamic rheology are incorporated to understand the phenomena and relate the performance and microstructure of the fluids used. The content of the chapter presents interesting results of a disruptive technology of great importance to the energy industry in general. It will be of great technical contribution to the readers of the book.