Shinyu Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shinyu Kim has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Tae Hee Lee
BK21 Four Educational and Research Program for Automotive-Software Convergence, Hanyang University, Seoul, South Korea
8 shared publications - Kihan Kwon
Jeonbuk National University
4 shared publications Namhee Ryu
4 shared publicationsSeungjae Min
4 shared publications- Hansu Kim
Department of Automotive Engineering, Hanyang University, Seoul, Republic of Korea
3 shared publications Junyong Jang
Department of Automotive Engineering, Hanyang University, Seoul, Republic of Korea
3 shared publications
Latest Publications
- Open Access
- 1 July 2022
- Published byย KEAI Publishingย inย Defence Technology
- Vol.ย 18 ย (7) , 1205-1218
Topology optimization of reactive material structures for penetrative projectiles
- 1 July 2022
- Published byย KEAI Publishingย inย Defence Technology
- Vol.ย 18 ย (7) , 1205-1218
Open AccessTopology optimization of reactive material structures for penetrative projectiles
- 1 May 2020
- Published byย Elsevierย inย Mechanical Systems and Signal Processing
- Vol.ย 139
Efficient uncertainty quantification for integrated performance of complex vehicle system
- 1 May 2020
- Published byย Elsevierย inย Mechanical Systems and Signal Processing
- Vol.ย 139
Efficient uncertainty quantification for integrated performance of complex vehicle system
- 15 February 2020
- Published byย Springer Natureย inย Structural and Multidisciplinary Optimization
- Vol.ย 62 ย (1) , 193-207
Optimum target stiffness allocation for design of a reinforcing member on an existing structure
- 15 February 2020
- Published byย Springer Natureย inย Structural and Multidisciplinary Optimization
- Vol.ย 62 ย (1) , 193-207
Optimum target stiffness allocation for design of a reinforcing member on an existing structure
- 1 December 2018
- Published byย Elsevierย inย Advances in Engineering Software
- Vol.ย 126, 34-45
Efficient design optimization of complex system through an integrated interface using symbolic computation
- 1 December 2018
- Published byย Elsevierย inย Advances in Engineering Software
- Vol.ย 126, 34-45
Efficient design optimization of complex system through an integrated interface using symbolic computation
- 30 April 2018
- Published byย The Korean Society of Mechanical Engineersย inย Transactions of the Korean Society of Mechanical Engineers - A
- Vol.ย 42 ย (4) , 353-361
Construction of an Integrated Interface for Design Optimization of a Combat Vehicle System Using Maple Symbolic Computation
๊ณ ์ถฉ์ค๋ ๋ชจ๋ธ์ ์ฌ์ฉํ์ฌ ์์ฉ ํตํฉ์ต์ ์ค๊ณ ์ํํธ์จ์ด๋ฅผ ํตํ ์์ธ์ค๊ณ ์ฌ๋ก๊ฐ ์ฆ๊ฐํ๊ณ ์๋ค. ํ์ง๋ง, ์ ํฌ์ฐจ๋๊ณผ ๊ฐ์ด ๋ณต์กํ ์์คํ ์ ์ค๊ณํ๊ธฐ ์ํด์๋ ์ธ์ด ๊ธฐ๋ฐ ๋ชจ๋ธ์ ์ฌ์ฉํ ์ฒด๊ณ ์์ค์ ์ ๊ทผ์ด ํ์ํ๋ค. ๋ํ, ์์น ์ฐ์ฐ์ ์ด์ฉํ ์์ฉ ์ต์ ํ ์๊ณ ๋ฆฌ์ฆ์ ํตํด ๊ฒฝ์ฌ๋ ๊ณ์ฐ ์, ๊ณ์ฐ ๋น์ฉ์ด ์ฆ๊ฐํ๊ณ ํ๋ ฌ ์ฐ์ฐ ๊ณผ์ ์ ์ํด ์ต์ ํ ์๊ฐ์ด ํ๋น๋ ์ ์๋ค. ๋ฐ๋ผ์, ๋ณธ ๋ ผ๋ฌธ์์๋ ์ธ์ด ๊ธฐ๋ฐ ๋ชจ๋ธ์ ์ด์ฉํ ๊ฐ๋ ์ค๊ณ์ ์ด์ ์ ๋ง์ถ์ด ํตํฉ ์ธํฐํ์ด์ค๋ฅผ ๊ตฌ์ถํ๊ณ , ๊ธฐํธ ์ฐ์ฐ์ ๋์ ํ์ฌ ํจ์จ์ ์ผ๋ก ์ต์ ํ๋ฅผ ์ํํ์๋ค. ํตํฉ ์ธํฐํ์ด์ค์ ๊ธฐํธ ์ฐ์ฐ์ ํจ์ฉ์ฑ์ ๋ณด์ด๊ธฐ ์ํด ์ ํฌ์ฐจ๋์ฒด๊ณ ์ต์ ์ค๊ณ๋ฅผ ์ํํ์์ผ๋ฉฐ, ๊ธฐํธ ์ฐ์ฐ์ ํตํด ์ต์ ํ ์๊ฐ์ด ๋งค์ฐ ํฌ๊ฒ ๊ฐ์ํ์๋ค.
- 30 April 2018
- Published byย The Korean Society of Mechanical Engineersย inย Transactions of the Korean Society of Mechanical Engineers - A
- Vol.ย 42 ย (4) , 353-361
Construction of an Integrated Interface for Design Optimization of a Combat Vehicle System Using Maple Symbolic Computation
๊ณ ์ถฉ์ค๋ ๋ชจ๋ธ์ ์ฌ์ฉํ์ฌ ์์ฉ ํตํฉ์ต์ ์ค๊ณ ์ํํธ์จ์ด๋ฅผ ํตํ ์์ธ์ค๊ณ ์ฌ๋ก๊ฐ ์ฆ๊ฐํ๊ณ ์๋ค. ํ์ง๋ง, ์ ํฌ์ฐจ๋๊ณผ ๊ฐ์ด ๋ณต์กํ ์์คํ ์ ์ค๊ณํ๊ธฐ ์ํด์๋ ์ธ์ด ๊ธฐ๋ฐ ๋ชจ๋ธ์ ์ฌ์ฉํ ์ฒด๊ณ ์์ค์ ์ ๊ทผ์ด ํ์ํ๋ค. ๋ํ, ์์น ์ฐ์ฐ์ ์ด์ฉํ ์์ฉ ์ต์ ํ ์๊ณ ๋ฆฌ์ฆ์ ํตํด ๊ฒฝ์ฌ๋ ๊ณ์ฐ ์, ๊ณ์ฐ ๋น์ฉ์ด ์ฆ๊ฐํ๊ณ ํ๋ ฌ ์ฐ์ฐ ๊ณผ์ ์ ์ํด ์ต์ ํ ์๊ฐ์ด ํ๋น๋ ์ ์๋ค. ๋ฐ๋ผ์, ๋ณธ ๋ ผ๋ฌธ์์๋ ์ธ์ด ๊ธฐ๋ฐ ๋ชจ๋ธ์ ์ด์ฉํ ๊ฐ๋ ์ค๊ณ์ ์ด์ ์ ๋ง์ถ์ด ํตํฉ ์ธํฐํ์ด์ค๋ฅผ ๊ตฌ์ถํ๊ณ , ๊ธฐํธ ์ฐ์ฐ์ ๋์ ํ์ฌ ํจ์จ์ ์ผ๋ก ์ต์ ํ๋ฅผ ์ํํ์๋ค. ํตํฉ ์ธํฐํ์ด์ค์ ๊ธฐํธ ์ฐ์ฐ์ ํจ์ฉ์ฑ์ ๋ณด์ด๊ธฐ ์ํด ์ ํฌ์ฐจ๋์ฒด๊ณ ์ต์ ์ค๊ณ๋ฅผ ์ํํ์์ผ๋ฉฐ, ๊ธฐํธ ์ฐ์ฐ์ ํตํด ์ต์ ํ ์๊ฐ์ด ๋งค์ฐ ํฌ๊ฒ ๊ฐ์ํ์๋ค.
- 15 December 2016
- Published byย Springer Natureย inย Journal of Mechanical Science and Technology
- Vol.ย 30 ย (12) , 5577-5586
Robust target cascading for improving firing accuracy of combat vehicle
- 15 December 2016
- Published byย Springer Natureย inย Journal of Mechanical Science and Technology
- Vol.ย 30 ย (12) , 5577-5586
Robust target cascading for improving firing accuracy of combat vehicle
- 6 August 2016
- Published byย SAGE Publicationsย inย Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol.ย 230 ย (10) , 1314-1323
Reliability-based design optimization of an automotive structure using a variable uncertainty
Reliability-based design optimization is an optimization technique based on the stochastic approach. Many studies using this approach assume the uncertainty in the design variable to be constant. However, when the uncertainty depends on the values of the design variable, this assumption results in the wrong conclusions. Therefore, the uncertainty should be considered as a variable in reliability-based design optimization. The uncertainty in the thickness during optimization, such as the tolerance, had been assumed to be a constant in automotive structures. However, in practice, the tolerance of the thickness depends on the nominal thickness. Hence, in this paper, reliability-based design optimization of an automotive structure such as an engine cradle and a body-in-white with a variable uncertainty is carried out. General Motors Korea provides the tolerance guide which defines the dependence between the nominal thickness and the tolerance. The information is adopted to define the variable uncertainty. Thus, the variable uncertainty can modify the uncertainty with respect to the design point, resulting in an accurate reliability estimation. Finally, reliability-based design optimization with a variable uncertainty is performed using the Akaike information criterion method which determines the fittest distribution of the performance based on the maximum likelihood estimation of the candidate distributions. Consequently, the automotive structures are optimized to reduce the mass while still satisfying the target reliabilities of the performances when considering a variable uncertainty.
- 6 August 2016
- Published byย SAGE Publicationsย inย Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol.ย 230 ย (10) , 1314-1323
Reliability-based design optimization of an automotive structure using a variable uncertainty
Reliability-based design optimization is an optimization technique based on the stochastic approach. Many studies using this approach assume the uncertainty in the design variable to be constant. However, when the uncertainty depends on the values of the design variable, this assumption results in the wrong conclusions. Therefore, the uncertainty should be considered as a variable in reliability-based design optimization. The uncertainty in the thickness during optimization, such as the tolerance, had been assumed to be a constant in automotive structures. However, in practice, the tolerance of the thickness depends on the nominal thickness. Hence, in this paper, reliability-based design optimization of an automotive structure such as an engine cradle and a body-in-white with a variable uncertainty is carried out. General Motors Korea provides the tolerance guide which defines the dependence between the nominal thickness and the tolerance. The information is adopted to define the variable uncertainty. Thus, the variable uncertainty can modify the uncertainty with respect to the design point, resulting in an accurate reliability estimation. Finally, reliability-based design optimization with a variable uncertainty is performed using the Akaike information criterion method which determines the fittest distribution of the performance based on the maximum likelihood estimation of the candidate distributions. Consequently, the automotive structures are optimized to reduce the mass while still satisfying the target reliabilities of the performances when considering a variable uncertainty.
- 13 July 2016
- Published byย Springer Natureย inย Structural and Multidisciplinary Optimization
- Vol.ย 54 ย (6) , 1671-1688
Nonparametric approach for uncertainty-based multidisciplinary design optimization considering limited data
- 13 July 2016
- Published byย Springer Natureย inย Structural and Multidisciplinary Optimization
- Vol.ย 54 ย (6) , 1671-1688
Nonparametric approach for uncertainty-based multidisciplinary design optimization considering limited data
- 1 June 2016
- Published byย The Korean Society of Mechanical Engineersย inย Transactions of the Korean Society of Mechanical Engineers - A
- Vol.ย 40 ย (6) , 587-593
An Efficient Constraint Boundary Sampling Method for Sequential RBDO Using Kriging Surrogate Model
- 1 June 2016
- Published byย The Korean Society of Mechanical Engineersย inย Transactions of the Korean Society of Mechanical Engineers - A
- Vol.ย 40 ย (6) , 587-593
An Efficient Constraint Boundary Sampling Method for Sequential RBDO Using Kriging Surrogate Model
- 1 December 2014
- Published byย Society for Computational Design and Engineeringย inย Korean Journal of Computational Design and Engineering
- Vol.ย 19 ย (4) , 324-331
Model-Driven Design Framework for Future Combat Vehicle Development based on Firepower and Mobility: (2) Integrated Design Optimization
In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.
- 1 December 2014
- Published byย Society for Computational Design and Engineeringย inย Korean Journal of Computational Design and Engineering
- Vol.ย 19 ย (4) , 324-331
Model-Driven Design Framework for Future Combat Vehicle Development based on Firepower and Mobility: (2) Integrated Design Optimization
In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.