SBSandra Bermejo

Sandra Bermejo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sandra Bermejo has a total of 114 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Novel interferential light-direction sensor exploiting the wave nature of light for elevation angle sensing

    by Michelle Cedeño Mata, Elisa García Menéndez, Juan J. Jiménez, Sandra Bermejo, Moises Garín

    Sun sensors are widely used in aerospace systems as attitude determination devices, providing accurate measurement of the direction of incident sunlight under stringent constraints on mass, volume, power consumption, and robustness. Conventional light-direction sensors are predominantly based on geometric optics, relying on apertures, slits, or shadow-casting structures to infer the angle of incidence from the irradiance distribution across photodetectors. Although these approaches are mature and widely deployed, they inherently involve trade-offs between angular resolution and field of view (FoV), while also requiring precise alignment and bulky optical structures [1-3].In this work, we present the analysis, design, fabrication, and experimental validation of a novel Interferential Light-Direction Sensor (ILDS) prototype for elevation angle sensing. Unlike conventional approaches, the proposed ILDS exploits the wave nature of light by encoding angular information directly into the spectral domain through the angle-dependent transmittance of a planar interferential filter [4]. The proposed architecture combines an interferential Bragg filter, two coloured absorptive filters, and two coplanar photodiodes in a compact and fully planar configuration, enabling high-resolution light-direction sensing without external optics or moving parts.Figure 1 illustrates the conceptual architecture and operating principle of the ILDS. The sensing mechanism relies on a multilayer interferential filter whose transmittance spectrum exhibits an angle-dependent spectral shift, encoding the direction of incoming light into a unique spectral signature. To detect this variation, the transmitted light is sampled using two coloured filters, each transmitting a different spectral region. The light reaching each channel is converted into electrical signals by two photodiodes (D1 and D2). As the incidence angle changes, the optical power transmitted through each filter varies differently, producing two distinct photocurrent responses. The acquired signals are processed to obtain the angular response of the sensor. To do that, a contrast function is calculated to quantify the differential behaviour between both sensing channels.C(θ)=(D1(θ)−D2(θ))/(D1(θ)+D2(θ))Where D1(θ) and D2(θ) correspond to the processed photocurrents at a given angle θ. This contrast function minimizes the influence of absolute illumination variations and enables the estimation of the incoming light direction from the relative response of both photodiodes.Figure 1: (a) Device structure. (b) Sensing mechanism based on the interaction between the angle-dependent interference filter response and the angle-independent coloured filters.The development of the ILDS began with the identification of the most suitable optical configuration capable of maximising angular sensitivity under Air Mass 0 (AM0) illumination conditions, which is representative of the extra-atmospheric solar spectrum expected in the space environment. To this end, a simulation-driven optimisation process was carried out, systematically evaluating the sensor response for all combinations within a set of 13 commercially available coloured filters, while independently optimising the thin-film interferential filter design for each configuration. The final configuration consists of a 11-layer Al2O3-TiO2-based Bragg filter with a total thickness of 1.03 µm, combined with BG39 and RG715 filters from Schott. Figures 2a, 2c, 2e, and 2g summarise the simulated responses of the coloured and interferential filters, the corresponding photodetector outputs, and the ILDS contrast response. Simulations of the complete optical stack predict an average sensitivity of 0.005 deg−1 over a field of view 0º to 85º. Moreover, the simulated response exhibits strong consistency under both AM0 and flat spectral illumination conditions.To experimentally validate the proposed concept, a prototype was fabricated and characterised under controlled illumination conditions. The interferential filter was fabricated by atomic layer deposition (ALD) through alternating deposition cycles of six TiO2 and five Al2O3 layers at 120 ºC. Optical characterization confirmed that the measured transmittance spectrum closely matched the target design (see Figures 2c and d). In parallel, the spectral responses of the coloured filters were experimentally verified (Figure 2b), showing good agreement with the manufacturer specifications.The complete ILDS prototype was finally assembled and electrically characterised using an experimental setup comprising a solar simulator providing a collimated beam with a planar wavefront and a solar-like spectral distribution, a motorised and monitored goniometer acting as the rotational stage, and dedicated photodiode readout electronics. As shown in Figure 2f, the experimental measurements revealed complementary responses between the both photodiodes and a clear dependence on the incidence angle. The resulting experimental contrast function (Figure 2h) exhibited a quasi-linear behaviour within an angular range between 25º and 50º, coinciding with the maximum sensitivity region of the device. Within this angular range, the experimental sensitivity reached 0.012 deg−1, while the angular precision was estimated at 0.014 deg when considering only electrical noise contributions. Overall, the experimental results demonstrate that the ILDS provides a measurable, monotonic, and robust angular response over a wide FoV, validating the feasibility of the proposed sensing approach.Figure 2: Comparison between simulated and experimental performance.In conclusion, the similarities between the trends revealed by simulations and experimental measurements validates the numerical modelling and confirms the viability of the ILDS concept as a novel wave-optics-based light-direction sensing approach. By combining an...

  • Open Access

    Spin-Coated Nanowire-Polymer Electrolyte for Low-Latency Humidity Sensing in CO2 Atmospheres

    by Abel Palomas, Michelle Cedeño, Xavier Manyosa, Stephen Garland, Andreas Lorek, Manuel Domínguez-Pumar, Sandra Bermejo

    Purpose of the workPrevious studies have demonstrated the efficacy of SiO2 composite ionic liquid gel polymer electrolyte (SiO2-CILGPE)-based capacitors as relative humidity (RH) sensors. These devices exhibit stable and unaltered electrical behaviours, specifically in their impedance module and phase, under both air and CO2 atmospheres, confirming their viability for planetary research applications such as Mars habitability studies. However, a critical limitation of the initial prototypes was their slow stabilization and response time. This was primarily attributed to the drop-casting fabrication method, which resulted in a relatively thick sensing layer of approximately 600 µm. To address this challenge, this work presents a refined fabrication technique utilizing spin coating to achieve a significantly thinner active layer. Furthermore, Al2O3 (alumina) nanowires have been incorporated into the polymer matrix. The primary purpose of this study is to evaluate, via electrochemical impedance spectroscopy (EIS), a technique chosen for its capability to comprehensively decouple the resistive and capacitive dynamics within the sensing layer, how this new composite and deposition method accelerates the sensor's dynamic response to humidity variations in controlled CO2 environments, overcoming the previous latency issues without compromising its established stability.Novelty of the work with respect to the state of the artWhile traditional relative humidity sensors often rely on rigid ceramics or standard conductive polymers, the use of a Composite Ionic Liquid Gel Polymer Electrolyte (CILGPE) provides a highly tuneable, cost-effective, and non-toxic platform for planetary environments. The primary novelty of this work lies in the structural and compositional engineering of this material. For the first time, we report the integration of alumina nanowires directly into an ultra-thin CILGPE layer. This unique architectural combination leverages the intrinsic ionic conductivity of the tailored gel alongside the massive surface-to-volume ratio introduced by the alumina nanowire network to create highly efficient diffusion pathways for water vapor molecules. Furthermore, these embedded alumina nanowires act as a structural scaffold, establishing interconnected routes that fundamentally enhance both the interaction dynamics and the charge transport throughout the sensing layer. This approach pioneers a new nanocomposite design in humidity sensing technologies, specifically targeted at overcoming the kinetic limitations of polymer-based sensors for rapid environmental monitoring.Results of the workInitial characterisation of the drop-casted SiO2-CILGPE sensors revealed prolonged stabilisation periods, which hindered their application for real-time atmospheric monitoring. The implementation of the newly engineered spin-coated nanocomposite is designed to drastically reduce this response latency. By replacing the bulk layer with an ultra-thin profile and integrating the alumina nanowire network, the sensor's stabilisation time is projected to shift from extended periods towards an optimal operational range. Furthermore, this architectural refinement aims to maintain the sensor's intrinsic stability. EIS measurements are expected to confirm that the device preserves its impedance module and phase curve trends under both air and controlled CO2 atmospheres. These advancements position the spin-coated alumina nanowire-CILGPE composite as a highly promising candidate for future humidity sensing in CO2-rich planetary environments, such as those encountered in Martian habitability studies.Figure 1. Z and phase responses of a SiO₂ CILGPE based capacitor under air and CO2 atmospheres at different pressures.Figure 2. Final capacitive humidity sensor with alumina nanowires.AcknowledgmentsThis work has been supported by the project PROD-UPC-2006-03, by the projects TED2021-131552B-C21/C22, by UPC-AGAUR 2026 and by the predoctoral program AGAUR-FI ajuts (2025 FI-1 01294) Joan Oró, which is backed by the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia, as well as the European Social Plus Fund.

  • Open Access

    Kramers–Kronig Diagnostic of Humidity-Induced Non-Idealities in Nanostructured Silica Capacitors

    by Bremnen Véliz, Sendey Vera, Sandra Bermejo, Albert Orpella, Manuel Domínguez-Pumar

    Metal–insulator–metal capacitors based on electrosprayed silica nanoparticles exhibit exceptionally high effective permittivity. However, their dielectric response is highly sensitive to ambient humidity, which can compromise data reliability. This study analyzes impedance characteristics of two silica nanoparticle-based MIM capacitors: (i) one measured under ambient conditions (0.1 Hz to 2 MHz) at 100/500 mV, and (ii) another under controlled relative humidity (RH) (40%, 70% and 90%) at 500 mV. Impedance consistency is rigorously assessed via Kramers–Kronig (KK) transforms. The first capacitor shows excellent KK consistency for real part Z′ (NRMSE = 3.3%), compatible with linear time-invariant assumptions. The second capacitor exhibits strong humidity-dependence deviations; NRMSE for Z′ rises from 14.5% at 40% RH to 141.2% at 90% RH, indicating linearity/causality breakdown from moisture-induced ionic conduction and interfacial polarization. These findings demonstrate that while increased humidity amplifies the effective dielectric response, it simultaneously introduces non-idealities that invalidate standard KK assumptions. Due to inherent microstructural variability between devices, humidity-dependent conclusions are derived from controlled intra-device analysis. Transmission Line Modeling confirms moisture enhances ionic network connectivity. Thus, KK analysis serves as a sensitive probe of environmental effects on nanostructured dielectrics, offering a framework to diagnose non-ideal behavior without a priori equivalent circuit models.

  • Open Access

    Physical Consistency of Giant Permittivity in Humid Nanostructured Silica Capacitors via Kramers-Kronig Analysis

    by Bremnen Véliz, Sendey Vera, Sandra Bermejo, Albert Orpella, Manuel Domínguez-Pumar

    Metal-Insulator-Metal (MIM) capacitors based on electrosprayed silica nanoparticles exhibit giant effective permittivity, making them attractive for miniaturized capacitive and sensing. However, their dielectrics response is highly sensitive to ambient humidity, which can compromise data reliability. This study analyzes impedance characteristics of two silica nanoparticles-based MIM capacitors: (i) one measured under ambient conditions across 0.1Hz to 2MHz at 100mV and 500mV excitation, and (ii) another characterized under controlled relative humidity (RH) conditions (40%, 70% and 90%). The physical consistency of the measured impedance is rigorously assessed via Kramers-Kronig (KK) transforms. The first capacitor shows excellent KK consistency for the real part of the impedance (NRMSE=3.3%), indicating behavior compatible with linear-invariant assumptions. In contrast, the second capacitor exhibits strong humidity dependence deviations, NRMSE for Z’ rises from 14.5% at 40%RH to 141.2% at 90%RH, suggesting a breakdown of linearity and causality due to moisture-induced ionic conduction and interfacial polarization processes. These findings demonstrate that while increased humidity amplifies the effective dielectric response, it simultaneously introduces non-ideal effects that invalidate standard KK assumptions. This work underscores the necessity of environmental control and provide critical insights for the design of humidity-sensitive devices and stable insulating capacitors.

  • Open Access

    Novel concept for light-direction sensors based on the wave nature of light

    by Michelle Cedeño Mata, Ignacio Arruego, Juan J. Jiménez, Sandra Bermejo, Moises Garin

    Sun sensors are designed to detect and measure both the intensity and direction of light. They play a key role in fields such as renewable energy, optics, and aerospace, where the ability to detect the angle of incidence of light has multiple applications. For example, in energy systems, the sun sensors are used in solar trackers to optimise the orientation of solar panels. In optics, they help align light beams within precision systems, and in the aerospace sector, light-angle sensors are used for attitude determination and control [1][2].Traditionally, conventional sun sensors work by relying on geometric principles, using the ray approximation of light to detect its direction [3]. In such systems, angular sensitivity is reached by projecting light through different occlusive elements onto photodetectors. The most basic approach employs a planar photodetector whose signal varies with the cosine of the incidence angle, providing only coarse resolution. More advanced designs include four-quadrant detectors or CMOS technology with internal walls that cast angle-dependent shadows [4][5], while digital alternatives use arrays of photodetectors that are exposed through aligned apertures or slits to determine direction [6][7]. Other methods include waveguides that react to both direction and wavelength, resonant filters based on diffraction, or microstructures that selectively block or transmit light [8]. Despite their wide use, conventional light-angle sensors face multiple limitations. Several sun sensors require bulky, precisely aligned optical components. Geometric method-based sun sensors present a trade-off between angular resolution and field of view, while digital sensors frequently underuse the active area. Resonant filter-based systems are usually sensitive to certain wavelengths, which restricts their applicability to broadband light sources. Consequently, current designs often reveal trade-offs between accuracy, reliability, compactness, and cost. In this view, this work presents the analysis and development of a novel light-angle sensor that addresses the limitations of traditional sun sensors by exploiting the wave nature of light [9]. The angular dependence of the transmittance spectrum through an interferent optical layer is the basis of the proposed concept. This effect can be attained through engineered structures such as diffraction braggs, gratings, metasurfaces, or rugate filters [10-13]. This angularly modulated spectral response enables compact and high-resolution sensing without the need for external optics.Figure 1: Representation of the measurement principle: a) angle dependence of transmission band in an interference filter, b) Transmission spectra sampled through different sensing elements featuring different coloured filters (angle-independent), and c) Representation of a device sensible to both, elevation and azimuth angles. The device would use an array of elements combining different coloured and interference filters. Figure 1 provides a conceptual illustration of the sensor, which consists of two main components: the interference filter and coloured absorptive filters. When source light interacts with the interferent layer, a specific transmittance pattern is generated, which varies as the angle of incidence changes. This modulated light then passes through the coloured filters, each of which transmits a specific wavelength band to a corresponding photodetector. Depending on the received transmittance distribution, the photodetectors generate different signal levels and, by comparing these signals, the system can accurately determine the direction of the incoming light. Therefore, the interferent filter is the primary sensing component, as it translates the angle of incidence into a unique spectral pattern, while coloured filters isolate specific wavelength regions, allowing each photodetector to respond differently depending on the incidence angle, converting angular information into measurable spectral variations. Figure 2 illustrates this principle through a simulated unpolarised transmittance spectrum of a TiO2-Al2O3 bragg-based structure, which clearly shows angle-dependent spectral features, and two commercial colour-filtered photodetectors. In particular, Figure 2a shows the transmittance as a function of wavelength and incidence angle, overlaid with the spectral response curves of red and blue filters. Based on the interaction of the generated transmittance spectrum and the sensitivity of each filter, Figure 2b displays the resulting electrical signals of the photodetectors. Finally, Figure 2c exhibits sensing response of the proposed sun sensor. In particular, this figure shows the relative change between both signals across the angular range, which reveals a monotonic response. The obtained behaviour confirms that the chosen combination of the bragg-based structure and coloured filters enables accurate, continuous, and high-resolution light-angle detection, validating the viability of the proposed sensor concept. Figure 2: Interferential light-angle sensor response: a) Real coloured-filters response vs. Unpolarized transmittance spectrum of a particular interference filter structure, b) Response of photodetectors to the interaction between coloured filters and the incidence-angle-dependent spectrum of the interferent element, and c) Relative change revealed by the complete sensor.In conclusion, this work presents a first insight into a new light-direction sensing approach based on wave optics. By combining an angle-sensitive interferent filter with colour-selective detection, the proposed sensor offers a promising balance of compactness, accuracy, robustness, cost-effectiveness, integration potential, and angle estimation without the need for bulky optics or complex alignment. Simulations confirm the feasibility of the concept and its potential for integration into next-generation light-direction detectors. Future work will focus on experimental...

  • Open Access

    Constant sensitivity operation of a sub-mHz MEMS magnetometer: mitigating small-scale thermal effects

    by X. Manyosa-Vilardell, J. Salazar-Ribera, J. Estany-Fernandez, S. Bermejo, J. Ramos-Castro, M. Dominguez-Pumar

  • Open Access

    Coupling electrochemical and spectroscopic methods for river water dissolved organic matter characterization

    by Stefan Platikanov, Abel Palomas, Michelle Cedeño Mata, Romà Tauler, Jorge Villar, Ramon Bragós, Sandra Bermejo, Joaquim Jaumot, Sílvia Lacorte

    Monitoring dissolved organic matter (DOM) in surface waters is essential for assessing ecosystem health and detecting pollution. However, conventional spectroscopic techniques often provide limited information about the electrochemical behavior of DOM. This study integrates electrochemical impedance spectroscopy (EIS) with classical methods such as UV–Vis absorption and fluorescence spectroscopies to improve DOM characterization in river water samples. In particular, this coupling provides additional insights into the electrochemical properties of DOM, which are not captured by conventional spectroscopic techniques. This study combined multiple data sources, including physicochemical parameters (e.g., water temperature, pH, conductivity), EIS spectral scores, fluorescence indices, and DOM fractions resolved by multivariate curve resolution–alternating least squares (MCR-ALS) applied to excitation-emission matrix (EEM) fluorescence data. The results from these different methods were then merged into a single dataset for a global principal component analysis (PCA), which allowed us to identify shared patterns and correlations across methods. The results revealed that low-altitude rivers showed the highest DOM content, followed by mid-altitude rivers, while high-altitude rivers presented the lowest. The PCA model indicated that low-frequency regions in the EIS spectra correlated with higher DOM content, whereas mid- to high-frequency regions were associated with lower DOM levels. These frequency-dependent patterns reflected differences in charge transfer and dielectric behavior of DOM in the river samples, which are not accessible through optical techniques. This highlights the potential of EIS as a complementary tool that provides electrochemical information on DOM composition for better water quality assessment.


  • Open Access

    Extension of the frequency range of thermal impedance measurements for the characterization of the thermophysical properties of regolith

    by Carlos Rosero-Pozo, Joan Pons-Nin, Suresh Kumar, Vicente Jimenez, Sandra Bermejo Broto, Manuel Dominguez-Pumar

  • Open Access

    Analysis and impedance modeling of silica and polystyrene nanoparticles in EMIM structures for humidity sensing applications

    by B. Véliz, A. Orpella, M. Dominguez-Pumar, S. Bermejo

    This work shows the fabrication technology details and a proposed impedance spectroscopy modeling of Electrosprayed-nanoparticles Metal Insulator Metal (EMIM) structures, and their potential as humidity sensors. The impedance measurement of two structures based on 255-nm silica and 295-nm polystyrene nanoparticles under different relative humidity levels (30-90 %RH) and scanning electron microscopy were carried out. A higher capacitance in silica than in polystyrene EMIM structure is attributed to the adsorption of moisture and the diffusion of charges through the Grotthus mechanism onto the nanoparticle surface. The Poole-Frenkel dielectric conductivity in the silica capacitor is interpreted, which increases with decreasing humidity. While the Ohmic dielectric conductivity in PS nanostructure decreases with decreasing humidity. The silica EMIM structure has a good linear capacitance dependence on the humidity of almost 95% and a maximum sensitivity of 6362%, defined as ΔC/C30%, is obtained, making these devices a promising novel nanostructure for humidity sensing applications.


  • Open Access

    Electrochemical impedance spectroscopy analysis of a SiO2 submicron-particles-based relative humidity sensor for planetary research applications

    by Michelle Cedeño, Abel Palomas, Xavier Manyosa, Ana Coloma, Manuel Domínguez-Pumar, Sandra Bermejo

    PurposeThis work presents the development and analysis of a SiO2 composite ionic liquid gel polymer electrolyte (SiO2-CILGPE)-based capacitor in air and carbon dioxide (CO2) atmospheres. The effectiveness of the proposed layer as a humidity-sensitive layer has been demonstrated in [1]. Its use as a humidity sensing layer not only stands out among other alternatives due to its sensing performance, but also because of its cost-effectiveness, scalability, and non-toxicity. In this realm, this study exhibits a brief comparison of the impedance characteristics of the proposed device under air and CO2 conditions, aiming to examine a first insight into the impact of CO2 onits electrical behaviour to evaluate its potential use as a relative humidity sensor for planetary research applications, such the ones carried out in Mars for habitability studies. Methodology Figure 1 illustrates the fabrication process of the SiO2 CILGPE. The fabrication starts by dissolving the host polymers (HPs) in deionised water at 70 ºC. Then, a blend of CH₃COONH₄ and 1-Butyl-3-methylimidazolium bromide is incorporated and stirred at 70 ºC. Afterwards, SiO₂ nanoparticles are embedded in the resultant ILGPE using an ultrasound bath until a homogenous mixture is achieved. Finally, the resulting electrolyte is deposited onto the active electrode area using drop-casting and subsequently cured, forming a layer with a thickness of around 600 μm and length and width of 0.4 mm and 1mm, respectively.The humidity sensing performance of the SiO2 CILGPE-based capacitor was evaluated using the electrochemical impedance spectroscopy (EIS) technique under different humidity conditions at atmospheric pressure. The impedimetric response has been obtained using the impedance module values, while the capacitance response has been calculated using Equation 1: C = -𝑍′′/( 2𝜋 𝑓𝑍2) (Eq. 1) Where 𝑍 and 𝑍′′ are the module and imaginary part of the impedance, respectively.Furthermore, EIS measurements under air and CO2 conditions at different pressures have been carried out and compared to evaluate its behaviour under a CO2 atmosphere. This evaluation starts with air evacuation until a partial vacuum, reducing the concentration of air. This first part of the process provides information about the impact of pressure variations on the electrical behaviour of the SiO2 CILGPE-based capacitor under air conditions. Once 0.1 mbar is reached, CO2 is injected in a controlled and gradual manner. This second step stimulates an increase in the internal pressure of the chamber and allows a preliminary analysis of how the quantity of CO2 can impact the impedimetric characteristics of the device. This methodology enables the characterisation of the SiO2-CILGPE-based capacitor under different conditions of pressure and gas composition, thereby providing initial insights into how the presence of different gases affects its performance. The exhibited EIS measurements can be fitted using the equivalent circuit (EC) displayed in Figure 4. The analysis of EIS data from ECs could allow a first insight into the understanding of the impact of CO2 on the sensing mechanism and performance of the SiO2 CILGPE-based capacitor. ResultsFigure 2 illustrates the obtained Z and capacitance humidity sensing responses. As can be noticed, the SiO2 CILGPE-based capacitor reveals changes in two parameters, increasing its reliability compared to other relative humidity sensors in the literature and offering more information that could facilitate the calibration process.Following the analysis of the EIS data, Figure 3 compares the obtained impedance module, phase, and capacitance spectra under air and CO2 atmospheres. It is noticeable that the curves of the three parameters of the SiO2 CILGPE-based capacitor exhibit the same trend under the presence of both gases, thereby suggesting the SiO2 CILGPE layer could work similarly under air and CO2.Nevertheless, the characterised parameters reveal opposite shifts in response to pressure variations. Firstly, under an air atmosphere, it can be noticed that a reduction in the pressure implies an increase in the impedance module and a decrease in the capacitance. This behaviour could be ascribed to a reduction of the water vapour molecules since reducing the pressure inside the measurement chamber also implies a reduction in the partial pressure of all gases, including water vapour [2]. Reducing the water molecules promotes a decrease in the number of charge carriers within the humidity-sensitive layer and, hence, an increase in the impedance and a decrease in the capacitance. Conversely, under a CO2 atmosphere, the SiO2 CILGPE-based capacitor depicts an increase in the impedance module values and a reduction in the capacitance when increasing the pressure. This finding might be attributed to the injection of CO2 into the vacuumed chamber. One possible explanation for such phenomena is that introducing CO2 into the chamber increases the pressure, thereby could reduce the water vapour concentration relative to the total gas, promoting a decrease in the relative humidity. Consequently, the obtained impedance spectra suggest that the SiO2 CILGPE-based capacitor could possess the same response to relative humidity variations under the presence of air and CO2. Further research should focus on investigating and analysing the impact of CO2 presence under different relative humidity levels. ConclusionsEIS measurements show that, under air and CO2 conditions, the SiO2 CILGPE-based capacitor exhibits similar impedance, phase, and capacitance curve trends, thereby suggesting the SiO2 CILGPE layer could operate following similar electrical behaviours under CO2. Additionally, this comparison shows that a reduction in the relative humidity could imply the same response under air and CO2 atmospheres. Therefore, it might suggest that CO2 does not alter...