Esperanza Mateos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Esperanza Mateos has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Leyre Ormaetxea
Department of Mathematics, Faculty of Science and Technology, University of the Basque Country UPV/EHU, Barrio Sarriena S/N, 48940 Leioa, Spain
4 shared publications A. Elias
1 shared publication- Astrid Barona
University of the Basque Country (UPV/EHU)
1 shared publication - Florencio Garrido
Department of Applied Mathematics, University of the Basque Country UPV/EHU, Rafael Moreno ’Pitxitxi’, n 3. 48013 Bilbao, Spain
1 shared publication - Francisco Rodríguez-Puerta
IuFOR, EiFAB, Universidad de Valladolid
1 shared publication - Gabriel Ibarra-Berastegi
Department of NE and Fluid Mechanics, University of the Basque Country (UPV/EHU), Alda, Urkijo, 48013 Bilbao, Spain
1 shared publication
Latest Publications
- Open Access
- 15 January 2019
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1420
Study on the Potential of Forest Biomass Residues for Bio-Energy
The Kyoto protocol officially recognised the role of forests as carbon sinks in the mitigation of global climate change factors, basically by reducing the atmospheric concentrations of CO2. The utilization of forest biomass residues for bio-energy can help meet the need for renewable energy production. The aim of this research work is the development of a methodology to quantify and yield cartography of the prospective energy production of residual biomass from the most representative forest species of Biscay, province of the Autonomous Community of the Basque Country (ACBC, Spain), using a Geographic Information System (GIS) computer tool. A model of indirect estimation has been used in order to estimate the evolution of forest masses throughout in any area of Biscay. In the study area, residues from forest represent a large biomass potential. The stock of total forest biomass (aboveground and underground) (TB) existing in the forests of the province of Biscay in the year 2016 amounted to 16.380 Tg of dry material, which implies a sequestration of 29.874 Tg of CO2. The results obtained after the statistical analyses of the data showed that the amount of mean forest biomass residue achieved with a 95% confidence interval was 73,216.7 Mg year−1. The estimation of biomass quantities that may generate forest activity will allow us to accomplish its planned exploitation, taking into account both economic and environmental aspects, with the aim of determining which the optimum location for setting up an energy production plant is.
- 15 January 2019
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1420
Open AccessStudy on the Potential of Forest Biomass Residues for Bio-Energy
The Kyoto protocol officially recognised the role of forests as carbon sinks in the mitigation of global climate change factors, basically by reducing the atmospheric concentrations of CO2. The utilization of forest biomass residues for bio-energy can help meet the need for renewable energy production. The aim of this research work is the development of a methodology to quantify and yield cartography of the prospective energy production of residual biomass from the most representative forest species of Biscay, province of the Autonomous Community of the Basque Country (ACBC, Spain), using a Geographic Information System (GIS) computer tool. A model of indirect estimation has been used in order to estimate the evolution of forest masses throughout in any area of Biscay. In the study area, residues from forest represent a large biomass potential. The stock of total forest biomass (aboveground and underground) (TB) existing in the forests of the province of Biscay in the year 2016 amounted to 16.380 Tg of dry material, which implies a sequestration of 29.874 Tg of CO2. The results obtained after the statistical analyses of the data showed that the amount of mean forest biomass residue achieved with a 95% confidence interval was 73,216.7 Mg year−1. The estimation of biomass quantities that may generate forest activity will allow us to accomplish its planned exploitation, taking into account both economic and environmental aspects, with the aim of determining which the optimum location for setting up an energy production plant is.
- Open Access
Sustainable Renewable Energy by Means of Using Residual Forest Biomass
The substitution of energy based on fossil fuel by bioenergy could be an effective solution to reduce external energy dependency, thereby promoting sustainable development. This article details a study of the use of biomass residues produced in the forestry sector as a consequence of field operations of the two predominant forest species (Pinus radiata D. Don and Ecualyptus globulus Labill) of Biscay (Spain). The potential of forest residues is estimated to be 66,600 dry Mg year . These residues would provide 1307 TJ year . Energy parameters, ultimate and proximate analyses, and the level of emissions of the forest residues are performed in order to estimate their characteristics as fuel. The research done has shown very similar values in terms of the net calorific value of the residues of P. radiata (19.45 MJ kg ) and E. globulus (19.48 MJ kg ). The determined emission factors indicate a reduction in gas emissions: CO (23–25%), CO (22–25%), SO (87–91%) and dust (11–38%) and an increase of 11–37% in NO compared to hard coal. Estimation of the emission factors of the residual biomass allows the environmental impacts, that are potentially produced by biofuel, to be estimated.Open AccessSustainable Renewable Energy by Means of Using Residual Forest Biomass
The substitution of energy based on fossil fuel by bioenergy could be an effective solution to reduce external energy dependency, thereby promoting sustainable development. This article details a study of the use of biomass residues produced in the forestry sector as a consequence of field operations of the two predominant forest species (Pinus radiata D. Don and Ecualyptus globulus Labill) of Biscay (Spain). The potential of forest residues is estimated to be 66,600 dry Mg year . These residues would provide 1307 TJ year . Energy parameters, ultimate and proximate analyses, and the level of emissions of the forest residues are performed in order to estimate their characteristics as fuel. The research done has shown very similar values in terms of the net calorific value of the residues of P. radiata (19.45 MJ kg ) and E. globulus (19.48 MJ kg ). The determined emission factors indicate a reduction in gas emissions: CO (23–25%), CO (22–25%), SO (87–91%) and dust (11–38%) and an increase of 11–37% in NO compared to hard coal. Estimation of the emission factors of the residual biomass allows the environmental impacts, that are potentially produced by biofuel, to be estimated. - Open Access
Spatial Distribution of Biomass and Woody Litter for Bio-Energy in Biscay (Spain)
Forest management has been considered a subject of interest, because they act as carbon (C) sinks to mitigate CO emissions and also as producers of woody litter (WL) for bio-energy. Overall, a sustainably managed system of forests and forest products contributes to carbon mitigation in a positive, stable way. With increasing demand for sustainable production, the need to effectively utilise site-based resources increases. The utilization of WL for bio-energy can help meet the need for renewable energy production. The objective of the present study was to investigate biomass production (including C sequestration) from the most representative forestry species (Pinus radiata D. Don and Ecualyptus globulus Labill) of Biscay (Spain). Data from the third and fourth Spanish Forest Inventories (NFI3-2005 and NFI4-2011) were used. We also estimated the potential WL produced in the forest activities. Our findings were as follows: Forests of Biscay stored 12.084 Tg of biomass (dry basis), with a mean of 147.34 Mg ha in 2005 and 14.509 Tg of biomass (dry basis), with a mean of 179.82 Mg ha in 2011. The total equivalent CO in Biscay’s forests increased by 1.629 Tg year between 2005 and 2011. The study shows that the energy potential of carbon accumulated in the WL amounted to 1283.2 million MJ year . These results suggest a considerable potential for energy production.Open AccessSpatial Distribution of Biomass and Woody Litter for Bio-Energy in Biscay (Spain)
Forest management has been considered a subject of interest, because they act as carbon (C) sinks to mitigate CO emissions and also as producers of woody litter (WL) for bio-energy. Overall, a sustainably managed system of forests and forest products contributes to carbon mitigation in a positive, stable way. With increasing demand for sustainable production, the need to effectively utilise site-based resources increases. The utilization of WL for bio-energy can help meet the need for renewable energy production. The objective of the present study was to investigate biomass production (including C sequestration) from the most representative forestry species (Pinus radiata D. Don and Ecualyptus globulus Labill) of Biscay (Spain). Data from the third and fourth Spanish Forest Inventories (NFI3-2005 and NFI4-2011) were used. We also estimated the potential WL produced in the forest activities. Our findings were as follows: Forests of Biscay stored 12.084 Tg of biomass (dry basis), with a mean of 147.34 Mg ha in 2005 and 14.509 Tg of biomass (dry basis), with a mean of 179.82 Mg ha in 2011. The total equivalent CO in Biscay’s forests increased by 1.629 Tg year between 2005 and 2011. The study shows that the energy potential of carbon accumulated in the WL amounted to 1283.2 million MJ year . These results suggest a considerable potential for energy production. - Open Access
- 30 December 2017
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Forest Systems
- Vol. 26 (3) , e019
Use of LiDAR data during multi-annual periods for estimating forestry variables
Aim of study: To test the use of LiDAR data from a single acquisition in order to estimate volume overbark variations ina 5-yr period of Pinus radiata D. Don.Area of study: Province of Bizkaia in the Autonomous Community of the Basque Country (Spain).Material and methods: Two field plot measurements were made in 2011 and 2015 and two wood volume models (one for each year) were fitted using the metric variables of the 2012 LiDAR points cloud. The models were applied to a 26.59 m raster covering the study area and the increase in volume at each pixel was calculated by subtraction.Main results: The increase in estimated wood volume, when added to the volume of timber extracted in the area during the 5-yr period under consideration, yielded an average increase of 13.74 m3 ha-1 yr-1, which corresponds to the average growth of the P. radiata in that area. The harvest area estimated using this procedure largely coincides with the actual harvest area in the same period. The value of R2 (85%) of the wood volume model for 2011 is similar to that obtained in other studies. However, as expected, the one obtained for the wood volume model for 2015 (80%) is significantly lower.Research highlights: The increase in wood volume can be estimated using a single LiDAR flight and field data from the 5-yr period provided that data from plots subjected to this kind of harvest is included in the models.
- 30 December 2017
- Published by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) in Forest Systems
- Vol. 26 (3) , e019
Open AccessUse of LiDAR data during multi-annual periods for estimating forestry variables
Aim of study: To test the use of LiDAR data from a single acquisition in order to estimate volume overbark variations ina 5-yr period of Pinus radiata D. Don.Area of study: Province of Bizkaia in the Autonomous Community of the Basque Country (Spain).Material and methods: Two field plot measurements were made in 2011 and 2015 and two wood volume models (one for each year) were fitted using the metric variables of the 2012 LiDAR points cloud. The models were applied to a 26.59 m raster covering the study area and the increase in volume at each pixel was calculated by subtraction.Main results: The increase in estimated wood volume, when added to the volume of timber extracted in the area during the 5-yr period under consideration, yielded an average increase of 13.74 m3 ha-1 yr-1, which corresponds to the average growth of the P. radiata in that area. The harvest area estimated using this procedure largely coincides with the actual harvest area in the same period. The value of R2 (85%) of the wood volume model for 2011 is similar to that obtained in other studies. However, as expected, the one obtained for the wood volume model for 2015 (80%) is significantly lower.Research highlights: The increase in wood volume can be estimated using a single LiDAR flight and field data from the 5-yr period provided that data from plots subjected to this kind of harvest is included in the models.
- Open Access
Soil Erosion and Forests Biomass as Energy Resource in the Basin of the Oka River in Biscay, Northern Spain
The aim of this work has been the development of a methodology for the evaluation of residual forest biomass in Biscay, a province in northern Spain. The study area is located in the Oka river basin, an area of great ecological value qualified by UNESCO (United Nations Educational Scientific and Cultural Organization) in 1984 as a Biosphere Reserve. The project tries to determine the potential, available and usable as energy resource, residual forests biomass, after the treatments of forest species in the area. Soil erosion was modeled using the USLE (Universal Soil Loss Equation) and MUSLE (Modified USLE) methods by estimating rainfall erosivity factor (R), the soil erodibility factor (K), the topographic factors (L and S), cropping factor (C), and the conservation practice factor (P). By means of these models, it will be possible to determine the current soil erosion rate and its potential evolution due to different forest treatments. Soil erodibility, slope of the terrain and the loss of SOC (Soil Organic Carbon) were the restrictive indicators for the bioenergy use of forest biomass, taking into account principles of sustainability. The amount of residual forestry biomass useable for energy purposes has been estimated at 4858.23 Mg year−1.
Open AccessSoil Erosion and Forests Biomass as Energy Resource in the Basin of the Oka River in Biscay, Northern Spain
The aim of this work has been the development of a methodology for the evaluation of residual forest biomass in Biscay, a province in northern Spain. The study area is located in the Oka river basin, an area of great ecological value qualified by UNESCO (United Nations Educational Scientific and Cultural Organization) in 1984 as a Biosphere Reserve. The project tries to determine the potential, available and usable as energy resource, residual forests biomass, after the treatments of forest species in the area. Soil erosion was modeled using the USLE (Universal Soil Loss Equation) and MUSLE (Modified USLE) methods by estimating rainfall erosivity factor (R), the soil erodibility factor (K), the topographic factors (L and S), cropping factor (C), and the conservation practice factor (P). By means of these models, it will be possible to determine the current soil erosion rate and its potential evolution due to different forest treatments. Soil erodibility, slope of the terrain and the loss of SOC (Soil Organic Carbon) were the restrictive indicators for the bioenergy use of forest biomass, taking into account principles of sustainability. The amount of residual forestry biomass useable for energy purposes has been estimated at 4858.23 Mg year−1.
- Open Access
Assessment of Biomass Energy Potential and Forest Carbon Stocks in Biscay (Spain)
The aim of this research is to identify, quantify and characterize the potential available forest biomass of Pinus radiata D. Don and Eucalyptus globulus Labill. across Biscay province in northern Spain. In order to do this, we have used information from the National Inventories of Spain to quantify the amount of carbon dioxide accumulated in the forests of Biscay by means of stratum-species-based forestry statistics. The total biomass and biomass fractions have been estimated using two different methods: allometric biomass equations (ABE) and biomass expansion factors (BEF). The second objective is to develop a methodology to quantify and produce a cartography of the prospective energy production of residual biomass from the most representative forest species of Biscay. For this purpose, we have used a Geographic Information System (GIS) computer tool. We have found that the stock of carbon accumulated in the main forest species in Biscay in 2014 amounts to 8.2 Tg (ABE) and 6.63 Tg (BEF) equivalent to 30 and 24.3 Tg of CO2, respectively. The quantity of forestry biomass residue (FBR) obtained has been estimated as 52,214 Mg·year-1 dry matter. This amount means a prospective energy supply of 947,000 GJ·year-1.
Open AccessAssessment of Biomass Energy Potential and Forest Carbon Stocks in Biscay (Spain)
The aim of this research is to identify, quantify and characterize the potential available forest biomass of Pinus radiata D. Don and Eucalyptus globulus Labill. across Biscay province in northern Spain. In order to do this, we have used information from the National Inventories of Spain to quantify the amount of carbon dioxide accumulated in the forests of Biscay by means of stratum-species-based forestry statistics. The total biomass and biomass fractions have been estimated using two different methods: allometric biomass equations (ABE) and biomass expansion factors (BEF). The second objective is to develop a methodology to quantify and produce a cartography of the prospective energy production of residual biomass from the most representative forest species of Biscay. For this purpose, we have used a Geographic Information System (GIS) computer tool. We have found that the stock of carbon accumulated in the main forest species in Biscay in 2014 amounts to 8.2 Tg (ABE) and 6.63 Tg (BEF) equivalent to 30 and 24.3 Tg of CO2, respectively. The quantity of forestry biomass residue (FBR) obtained has been estimated as 52,214 Mg·year-1 dry matter. This amount means a prospective energy supply of 947,000 GJ·year-1.
- 27 August 2015
- Published by Taylor & Francis
- p. 133-138
Estimation of residue biomass in the Oka river basin (Spain)
- 27 August 2015
- Published by Taylor & Francis
- p. 133-138
Estimation of residue biomass in the Oka river basin (Spain)
- 30 April 2015
- Published by Cultech Publishing Sdn. Bhd. in Renewable Energy and Power Quality Journal
- Vol. 13 (6)
Assessment of biomass potential for Power Production
The aim of this research Project is to develop a methodology to evaluate forest biomass for calculating energy production and resources cartography by means of the use of GIS (Geographic Information System) in the Urdaibai (Biscay). The project tries to determine the potential, available, and usable as energy resource, residual forest biomass, after the treatments of forest species in the area. The first part of the project aims at validating the ground map of the Urdaibai (Spain) obtained in the last Inventario Forestal Nacional (IFN3). In order to complete this part of the project, it is necessary to carry out a study on the ground composition in the area by sampling and subsequent laboratory analysis. In this inventory phase, the use of U.S.L.E/R.U.S.LE (Universal Soil Loss Equation) for calculating soil loss is suggested, since this equation is one of the main tools able to estimate the mean erosive rate of a territory. By means of this empiric model, it will be possible to determine the current soil erosion rate and its potential evolution due to different forest treatments that are characteristic of the most representative forest species in the area.
- 30 April 2015
- Published by Cultech Publishing Sdn. Bhd. in Renewable Energy and Power Quality Journal
- Vol. 13 (6)
Assessment of biomass potential for Power Production
The aim of this research Project is to develop a methodology to evaluate forest biomass for calculating energy production and resources cartography by means of the use of GIS (Geographic Information System) in the Urdaibai (Biscay). The project tries to determine the potential, available, and usable as energy resource, residual forest biomass, after the treatments of forest species in the area. The first part of the project aims at validating the ground map of the Urdaibai (Spain) obtained in the last Inventario Forestal Nacional (IFN3). In order to complete this part of the project, it is necessary to carry out a study on the ground composition in the area by sampling and subsequent laboratory analysis. In this inventory phase, the use of U.S.L.E/R.U.S.LE (Universal Soil Loss Equation) for calculating soil loss is suggested, since this equation is one of the main tools able to estimate the mean erosive rate of a territory. By means of this empiric model, it will be possible to determine the current soil erosion rate and its potential evolution due to different forest treatments that are characteristic of the most representative forest species in the area.
- 30 March 2011
- Published by UK Zhende Publishing Limited Company in Renewable Energy and Power Quality Journal
- Vol. 9 (1)
Energy valuing of forest biomass residues in Bizkaia
The aim of this research work is the development of a methodology to quantify and yield cartography of the prospective energy production of residual biomass from the most representative forest species of Bizkaia, using a Geographic Information System (GIS) computer tool. A model of indirect estimation has been used in order to estimate the evolution of forest masses throughout in any area of Bizkaia. Arboreal species have timber-yielding utility, and this is the reason why the remains obtained after the forest treatments carried out for the preservation and improvement of arboreal masses, are those quantified in this work as energy production biomass (EPB). After analyzing statistically the results obtained, 52,214 metric tons of residual forest biomass per year are estimated. This means a potential energy supply of 32,011 toe per year. The estimation of biomass quantities that may generate forest activity will allow us to accomplish its planned exploitation, taking into account both economic and environmental aspects, with the aim of determining which the optimum location for setting up an energy production plant is.
- 30 March 2011
- Published by UK Zhende Publishing Limited Company in Renewable Energy and Power Quality Journal
- Vol. 9 (1)
Energy valuing of forest biomass residues in Bizkaia
The aim of this research work is the development of a methodology to quantify and yield cartography of the prospective energy production of residual biomass from the most representative forest species of Bizkaia, using a Geographic Information System (GIS) computer tool. A model of indirect estimation has been used in order to estimate the evolution of forest masses throughout in any area of Bizkaia. Arboreal species have timber-yielding utility, and this is the reason why the remains obtained after the forest treatments carried out for the preservation and improvement of arboreal masses, are those quantified in this work as energy production biomass (EPB). After analyzing statistically the results obtained, 52,214 metric tons of residual forest biomass per year are estimated. This means a potential energy supply of 32,011 toe per year. The estimation of biomass quantities that may generate forest activity will allow us to accomplish its planned exploitation, taking into account both economic and environmental aspects, with the aim of determining which the optimum location for setting up an energy production plant is.
- 1 April 2010
- Published by Cultech Publishing Sdn. Bhd. in Renewable Energy and Power Quality Journal
- Vol. 1 (08) , 1514-1518
Biomass Utilisation in Energy Process
- 1 April 2010
- Published by Cultech Publishing Sdn. Bhd. in Renewable Energy and Power Quality Journal
- Vol. 1 (08) , 1514-1518
Biomass Utilisation in Energy Process