Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiao Liu has a total of 105 co-authors. Here are the top co-authors by number of shared publications:

  • Jing Shi

    State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China

    27 shared publications
  • Huiqing Fan

    Northwestern Polytechnical University

    16 shared publications
  • Huiling Du

    School of Materials Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, People’s Republic of China

    11 shared publications
  • Wenchao Tian

    State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China

    11 shared publications
  • Jing Shi

    Xidian Univ, Sch Mechanoelect Engn, State Key Lab Electromech Integrated Mfg High Perf, Xian 710071, Peoples R China

    7 shared publications
  • Fangyuan Zhu

    Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China

    6 shared publications

Latest Publications

  • Non-precious metal-decorated BiFeO 3 ferroelectrics for polarization-driven efficient CO 2 photoreduction

    by Ximei Mao, Yuyin Wang, Jing Shi, Fangyuan Zhu, Chenxi Liu, Yanrui Li, Wenchao Tian, Weijia Wang, Laijun Liu, Xiao Liu

    Efficient and fully CO-selective CO 2 photoreduction are enabled by polarization-induced energy-band modulation and interfacial electron transfer over non-precious-metal-decorated BiFeO 3 ferroelectrics.

  • Defect Chemistry and Structural Heterogeneity Induced High Piezoelectric Performance of Nb 2 O 5 -Doped x PNN-(1 – x )PZ 0.49– y T 0.51+ y Solid Solutions near the Morphotropic Phase Boundary

    by Yiyi Wang, Jing Shi, Fangyuan Zhu, Chenxi Liu, Liting Wang, Changbai Long, Wenchao Tian, Laijun Liu, Tao Zhang, Dawei Yi, et al.

    In the field of actuators based on piezoelectric ceramics, it is extremely important to simultaneously achieve high piezoelectric coefficients (d33) and electromechanical coupling factors (kp). This study investigates ternary xPbNi1/3Nb2/3O3-(1 - x)PbZr0.49-yTi0.51+yO3 (PNN-PZT) piezoelectric solid solutions around the morphotropic phase boundary systematically. The anomalous polarization and conduction mechanisms of Nb2O5 doping in enhancing the piezoelectric performance are clarified by revealing the synergistic effects of defect chemistry and structural heterogeneity. Prominent integrated piezoelectric properties (d33 = 796 pC/N, kp = 0.82, and Tc = 169 °C) are obtained by introducing a moderate Nb2O5 donor dopant associated with preferential occupancy and a nonmonotonic phase transition. The distortion of the BO6 octahedra and the formation of localized nanodomain structures contribute to the softened B-O bond repulsion and promote domain wall motion. They are significantly affected by the interaction between the oxygen vacancy migration capacity and the generated lead vacancies, which are disclosed by complex impedance. The intrinsic and extrinsic contributions originated from lattice distortion and domain wall activity that facilitate the piezoelectric response are further learned by the domain structure and Rayleigh analyses. This study provides a new paradigm for designing high performance of d33 and kp in relaxor ferroelectrics through defect modulation with abnormal polarization behaviors.


  • Large strain with low hysteresis and its contributions in Sm-doped PYN-PMN-PT piezoceramics via MPB regulation

    by Pu Wang, Yiyi Wang, Laijun Liu, Wenchao Tian, Tao Zhang, Jing Shi, Xiao Liu

    Piezoelectric ceramics play a critical role in precision-driven applications; however, achieving high-strain performance often comes at the cost of increased hysteresis and compromised thermal stability. This study reports on 1.5 mol. % Sm3+-doped 0.16PYN-0.52PMN-0.32PT ceramics, with a phase structure situated near the morphotropic phase boundary, which exhibit significantly enhanced piezoelectric properties, including an enhanced piezoelectric coefficient (d33 = 710 pC/N), a large-signal piezoelectric coefficient (d33* = 885 pm/V), and an ultra-low strain hysteresis (H = 3.9%). Rayleigh analysis reveals that this optimization is primarily attributed to increased lattice distortion and a significant enhancement in the contribution of the reversible domain wall motion, accounting for 54% of the total piezoelectric response. This effectively suppresses irreversible domain wall motion, thereby reducing strain hysteresis. Furthermore, the ceramics maintain an ultrahigh unipolar strain of ≈0.22% and excellent thermal stability within the temperature range of 45–120 °C. This study systematically investigates the mechanisms underlying low-hysteresis strain behavior and proposes optimization strategies from the perspectives of phase structure regulation and domain wall behavior, offering insights for the design of high-performance piezoelectric ceramics in precision-driven applications.


  • Inductive effect of charge transfer in ferroelectrics and plasmonic Ag heterojunctions for enhanced CO2 photoreduction

    by Xiao Liu, Jicong Wang, Wenchao Tian, Yanrui Li, Jing Shi

    Converting carbon dioxide into fuel and chemicals by utilizing solar energy represents a cutting-edge approach to carbon recovery and energy renewal. The transfer behavior of photogenerated electrons and built-in electric field of photocatalysts greatly affect the efficiency of the photoreduction reaction. Herein, the heterostructures composed of bismuth sodium titanate (BNT) ferroelectrics and silver nanoparticles (Ag NPs) are constructed to promote the photocatalytic CO2 performance. The large spontaneous polarization of BNT optimizes the transfer dynamics of photoinduced electrons and holes and causes energy band bending with strong intrinsic electric field. With the aid of Ag NPs, the BNT@xAg heterojunctions exhibit intensified light absorption due to the phenomenon of localized surface plasmon resonance (LSPR), which extends the visible light absorption spectrum and strengthens charge transfer. The modified catalysts demonstrate improved charge separation capacity and notably prolonged electron lifetime up to 40.95 ns. The synergistic effect of LSPR and intrinsic polarization significantly boosts the photocatalytic efficiency together with ultrahigh CO product selectivity, which is outstanding among the ferroelectric and other representative photocatalysts. This study elucidates the photocatalytic enhancement mechanism of plasmonic Ag decorated BNT and offers an alternative route for the design of efficient catalysts.


  • Strong Interfacial Interaction in Polarized Ferroelectric Heterostructured Nanosheets for Highly Efficient and Selective Photocatalytic CO 2 Reduction

    by Xiao Liu, Yuyin Wang, Wenchao Tian, Fangyuan Zhu, Jicong Wang, Weijia Wang, Yanrui Li, Kaizhu Zeng, Jing Shi

    Heterojunctions are sustainable solutions for the photocatalytic CO 2 reduction reaction (CO 2 RR) by regulating charge separation behavior at the interface. However, their efficiency and product selectivity are severely hindered by the inflexible and weak built‐in electric field and the electronic structure of the two phases. Herein, ferroelectric‐based heterojunctions between polarized bismuth ferrite (BFO(P)) and CdS are constructed to enhance the interfacial interactions and catalytic activity. The intrinsic polarization field depending on the ferroelectric state causes significant electrostatic potential difference and energy‐band bending. This helps overcome the unsatisfactory redox potential that differs from the classical catalytic mechanism, and synergy from the heterostructure facilitates effective separation and transfer of photogenerated charges with an extended lifetime (>20 ns) and significantly enhanced photovoltage (1002 times that of BFO). The optimized charge carrier dynamics allow the heterojunction to achieve a much higher CO yield compared to state‐of‐the‐art ferroelectric‐based photocatalysts, and 85.46 and 23.47 times higher than those of pristine CdS and BFO, respectively. Moreover, it maintains an impressive 100% product selectivity together with excellent repeatability and cycling. This work not only sheds light on how a strong inherent polarity promotes the performance of heterojunction photocatalysts but also provides new insights for designing efficient photocatalytic CO 2 RR.


  • Structural insight into the multifunctionality of non-stoichiometric BNT ferroelectrics

    by Jing Shi, Jicong Wang, Fangyuan Zhu, Wenchao Tian, Weibo Hua, Huiqing Fan, Jing Yang, Laijun Liu, Xiao Liu

    The fine structural understanding and design route for the multifunctionality of non-stoichiometric BNT ferroelectrics are elaborated, including their ferroelectric, strain, and ionic conductivity performances.


  • Facile Synthesis of PtP2 Nanocrystals as Highly Active Electrocatalysts for Methanol Oxidation

    by Ruiyun Guo, Shangdong Ji, Yibin Liu, Xinbo Dong, Yanrui Li, Xiao Liu, Chenlu Yang, Yangzi Zheng, Mingshang Jin

    Although significant efforts have been made in the past few decades, the development of affordable, durable, and effective electrocatalysts for direct methanol fuel cells (DMFCs) remains a formidable challenge. Herein, we present a facile and efficient phosphorization approach for synthesizing PtP2 intermetallic nanocrystals and utilize them as electrocatalysts in the methanol oxidation reaction (MOR). Impressively, the synthesized PtP2 nanocatalysts exhibit a mass activity of 2.14 mA μg-1 and a specific activity of 6.28 mA cm-2, which are 5.1 and 9.5 times higher than those achieved by the current state-of-the-art commercial Pt/C catalyst, respectively. Moreover, the PtP2 nanocatalysts demonstrate improved stability toward acidic MOR by retaining 92.1% of its initial mass activity after undergoing 5000 potential cycles, far surpassing that of the commercial Pt/C (38%). Further DMFC tests present a 2.7 times higher power density than that of the commercial Pt/C, underscoring their potential for application in methanol fuel cells. Density functional theory calculations suggest that the accelerated MOR kinetics and improved CO tolerance on PtP2 can be attributed to the attenuated binding strength of CO intermediates and the enhanced stability due to strong Pt-P interaction. To our knowledge, this is the first report identifying the MOR performance on PtP2 intermetallic nanocrystals, highlighting their potential as highly active and stable nanocatalysts for DMFCs.


  • Surface oxygen vacancy engineering in weak Bi–O bonded ferroelectric bismuth sodium titanate for boosting the photocatalytic CO 2 reduction reaction

    by Xiao Liu, Jicong Wang, Fangyuan Zhu, Yanrui Li, Wenchao Tian, Weijia Wang, Ruiyun Guo, Laijun Liu, Jing Shi

    A novel ferroelectric photocatalyst modulated by the surface and polarization states is developed to promote the CO 2 reduction reaction, and the lattice distortion and elemental coordination environment are elaborated in detail.


  • Open Access

    Defect Dipole Behaviors on the Strain Performances of Bismuth Sodium Titanate-Based Lead-Free Piezoceramics

    by Yiyi Wang, Pu Wang, Laijun Liu, Yuyin Wang, Yingying Zhao, Wenchao Tian, Xiao Liu, Fangyuan Zhu, Jing Shi

    Bismuth sodium titanate (BNT)-based, lead-free piezoelectric materials have been extensively studied due to their excellent strain characteristics and environmental friendliness. In BNTs, the large strain (S) usually requires a relatively large electric field (E) excitation, resulting in a low inverse piezoelectric coefficient d33* (S/E). Moreover, the hysteresis and fatigue of strain in these materials have also been bottlenecks impeding the applications. The current common regulation method is chemical modification, which mainly focuses on forming a solid solution near the morphotropic phase boundary (MPB) by adjusting the phase transition temperature of the materials, such as BNT-BaTiO3, BNT-Bi0.5K0.5TiO3, etc., to obtain a large strain. Additionally, the strain regulation based on the defects introduced by the acceptor, donor, or equivalent dopant or the nonstoichiometry has proven effective, but its underlying mechanism is still ambiguous. In this paper, we review the generation of strain and then discuss it from the domain, volume, and boundary effect perspectives to understand the defect dipole behavior. The asymmetric effect caused by the coupling between defect dipole polarization and ferroelectric spontaneous polarization is expounded. Moreover, the defect effect on the conductive and fatigue properties of BNT-based solid solutions is described, which will affect the strain characteristics. The optimization approach is appropriately evaluated while there are still challenges in the full understanding of the defect dipoles and their strain output, in which further efforts are needed to achieve new breakthroughs in atomic-level insight.