Ihor Melnyk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ihor Melnyk has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Volodymyr Partuta
Lviv Polytechnic National University, Ministry of Education and Science of Ukraine, Lviv, Ukraine
4 shared publications - Myron Hohol
Lviv Polytechnic National University
3 shared publications - Olexander P. Maksymenko
Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, Lviv, Ukraine
3 shared publications - Yaroslav Ivanytskyi
Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, Lviv, Ukraine
3 shared publications - Dmytro Sydorak
Lviv Polytechnic National University
2 shared publications - Mykhailo Hrynenko
Karpenko Physico-Mechanical Institute, National Academy of Sciences of Ukraine, Lviv, Ukraine
2 shared publications
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
A review of methods for masonry structures strengthening using high-strength composites
The relevance of this study stems from the need to preserve and extend the service life of a large number of existing masonry buildings. This applies both to civil structures with brick walls and to historical monuments of architectural heritage. During prolonged use, such structures are subjected to destructive atmospheric influences, leading to the degradation of bricks and mortar and a reduction in their strength. Furthermore, seismic loads pose a serious threat to their structural stability, inducing shear forces in load-bearing elements. In recent years, many buildings with masonry structures in Ukraine have been damaged as a result of massive rocket strikes, accompanied by powerful explosive loads and shock waves. In this view, the development of effective methods for strengthening masonry is an extremely important engineering task. The main objective of this work is to review and analyse structural and technological approaches to the reinforcement of masonry structures in order to select the most effective solutions for further experimental and theoretical research. The article examines current trends in the transition from traditional strengthening methods to the use of the latest composite materials. A comparative analysis of various technologies for walls, columns, piers and beams strengthening and retrofitting has been carried out. Based on the literature reviewed, it has been demonstrated that the use of conventional fibre-reinforced polymers based on epoxy resins has a number of operational drawbacks. Organic resins prevent natural air exchange within walls due to their extremely low accumulation and debonding of the TRM (textile reinforced mortar). They are also flammable and possess excessive stiffness, which is poorly compatible with the flexible old masonry. To address these issues, the use of a state-of-the-art strengthening system based on mineral components is justified. This technology involves replacing polymer resins with a highly plastic polymer-cement mortar, into which a reinforcing mesh is embedded. This solution radically changes the structural behaviour of the structure: instead of dangerous brittle failure, controlled plastic deformation is ensured thanks to the uniform distribution of stresses. It has been proven that the use of an inorganic matrix guarantees excellent compatibility with historical materials, offers high fire resistance and allows work to be carried out even on damp substrates.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
Open AccessA review of methods for masonry structures strengthening using high-strength composites
The relevance of this study stems from the need to preserve and extend the service life of a large number of existing masonry buildings. This applies both to civil structures with brick walls and to historical monuments of architectural heritage. During prolonged use, such structures are subjected to destructive atmospheric influences, leading to the degradation of bricks and mortar and a reduction in their strength. Furthermore, seismic loads pose a serious threat to their structural stability, inducing shear forces in load-bearing elements. In recent years, many buildings with masonry structures in Ukraine have been damaged as a result of massive rocket strikes, accompanied by powerful explosive loads and shock waves. In this view, the development of effective methods for strengthening masonry is an extremely important engineering task. The main objective of this work is to review and analyse structural and technological approaches to the reinforcement of masonry structures in order to select the most effective solutions for further experimental and theoretical research. The article examines current trends in the transition from traditional strengthening methods to the use of the latest composite materials. A comparative analysis of various technologies for walls, columns, piers and beams strengthening and retrofitting has been carried out. Based on the literature reviewed, it has been demonstrated that the use of conventional fibre-reinforced polymers based on epoxy resins has a number of operational drawbacks. Organic resins prevent natural air exchange within walls due to their extremely low accumulation and debonding of the TRM (textile reinforced mortar). They are also flammable and possess excessive stiffness, which is poorly compatible with the flexible old masonry. To address these issues, the use of a state-of-the-art strengthening system based on mineral components is justified. This technology involves replacing polymer resins with a highly plastic polymer-cement mortar, into which a reinforcing mesh is embedded. This solution radically changes the structural behaviour of the structure: instead of dangerous brittle failure, controlled plastic deformation is ensured thanks to the uniform distribution of stresses. It has been proven that the use of an inorganic matrix guarantees excellent compatibility with historical materials, offers high fire resistance and allows work to be carried out even on damp substrates.
- 15 July 2025
- Published by Springer Nature
- p. 133-141
Parametric Optimization of Combined Steel Trusses
- 1 May 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (6) , 702-709
Determination of concrete deformations on the surface of cross-compressed reinforced concrete beams using the digital image correlation method
- 1 May 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (6) , 702-709
Determination of concrete deformations on the surface of cross-compressed reinforced concrete beams using the digital image correlation method
- 1 March 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (5) , 565-569
A method for assessing the stress-strain state of shell structural elements under loading in the hydrogen environment
- 1 March 2025
- Published by Springer Nature in Materials Science
- Vol. 60 (5) , 565-569
A method for assessing the stress-strain state of shell structural elements under loading in the hydrogen environment
- Open Access
- 5 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (1 (133)) , 73-81
Determining the effect of reinforcing asphalt-concrete coating with synthetic nets on its performance indicators
The object of this study is an asphalt concrete cover, the upper layer of which is reinforced with the synthetic material GlasGrid. The subject of research is the performance indicators of asphalt concrete coating. Experimental studies on the effect of reinforced asphalt concrete with synthetic nets on the evolution of rutting and bond strength between layers have been conducted. It has been established that reinforcing the asphalt concrete coating with synthetic nets reduces rutting. At 10,000 load cycles and a temperature of 50 °C, the average value of the rut depth in slab samples without a reinforcing joint was 3.8 mm, and at a temperature of 60 °C – 3.7 mm. In the case of reinforcing the upper layer with a GlasGrid®GG100 net, the depth of the rut at an operating temperature of 50 °C was 3.3, and at an operating temperature of 60 °C – 2.6 mm. With a total number of 20,000 load cycles, the average value of the rut depth without reinforcement of the slab sample is 7.5 mm, and with reinforcement – 5.9 mm. It was established that the rutting resistance of slab samples with reinforcing synthetic nets, in comparison with slab samples without reinforcing material, after the first stage of testing was 13.2 % and 29.7 % after the second stage of testing. It has been established that the maximum vertical shear force that occurs during the destruction of asphalt concrete layers without reinforcement is higher than asphalt concrete layers reinforced with a synthetic mesh. The values of the vertical shear forces without reinforcing the samples are 21.63 kN and 18.46 kN when the samples are reinforced with a synthetic mesh. At the same time, the maximum shear stresses between layers of asphalt concrete core samples without reinforcement are 1.169 MPa, and with reinforcement – 0.988 MPa. Reinforcing the upper layer of the asphalt concrete coating with synthetic meshes will lead to an increase in the durability of the asphalt concrete coating along road sections
- 5 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (1 (133)) , 73-81
Open AccessDetermining the effect of reinforcing asphalt-concrete coating with synthetic nets on its performance indicators
The object of this study is an asphalt concrete cover, the upper layer of which is reinforced with the synthetic material GlasGrid. The subject of research is the performance indicators of asphalt concrete coating. Experimental studies on the effect of reinforced asphalt concrete with synthetic nets on the evolution of rutting and bond strength between layers have been conducted. It has been established that reinforcing the asphalt concrete coating with synthetic nets reduces rutting. At 10,000 load cycles and a temperature of 50 °C, the average value of the rut depth in slab samples without a reinforcing joint was 3.8 mm, and at a temperature of 60 °C – 3.7 mm. In the case of reinforcing the upper layer with a GlasGrid®GG100 net, the depth of the rut at an operating temperature of 50 °C was 3.3, and at an operating temperature of 60 °C – 2.6 mm. With a total number of 20,000 load cycles, the average value of the rut depth without reinforcement of the slab sample is 7.5 mm, and with reinforcement – 5.9 mm. It was established that the rutting resistance of slab samples with reinforcing synthetic nets, in comparison with slab samples without reinforcing material, after the first stage of testing was 13.2 % and 29.7 % after the second stage of testing. It has been established that the maximum vertical shear force that occurs during the destruction of asphalt concrete layers without reinforcement is higher than asphalt concrete layers reinforced with a synthetic mesh. The values of the vertical shear forces without reinforcing the samples are 21.63 kN and 18.46 kN when the samples are reinforced with a synthetic mesh. At the same time, the maximum shear stresses between layers of asphalt concrete core samples without reinforcement are 1.169 MPa, and with reinforcement – 0.988 MPa. Reinforcing the upper layer of the asphalt concrete coating with synthetic meshes will lead to an increase in the durability of the asphalt concrete coating along road sections
- 21 October 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 60 (5) , 26-30
A method for assessing the stress-strain state of shell structural elements under load in a hydrogen environment
A method for assessing the stress-strain state in cylindrical shells was developed, taking into account the effect of external force loads and the influence of absorbed hydrogen. This influence promotes an increase in internal damage to the metal and a significant rise in the concentration of absorbed hydrogen, leading to the overall embrittlement of the metal. As a result of reduction of the specific fracture energy the material damage resistance decreases. The finite element method and the digital image correlation method was employed to analyze the distribution of axial, tangential, and radial stresses in the walls of cylindrical shells, as well as their effect on the overall deformability of the structures. Special attention was paid to the influence of prior material deformation and hydrogen degradation on the material resistance to fracture. The results showed that hydrogenation could significantly reduce critical strain, accelerating the fracture process, especially at high hydrogen concentration. Pri-strain plastic deformation contributes to an increase in internal damage in the metal and a substantial rise in the concentration of absorbed hydrogen, leading to the overall embrittlement of the metal and the specific fracture energy decrease.
- 21 October 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Physicochemical Mechanics of Materials
- Vol. 60 (5) , 26-30
A method for assessing the stress-strain state of shell structural elements under load in a hydrogen environment
A method for assessing the stress-strain state in cylindrical shells was developed, taking into account the effect of external force loads and the influence of absorbed hydrogen. This influence promotes an increase in internal damage to the metal and a significant rise in the concentration of absorbed hydrogen, leading to the overall embrittlement of the metal. As a result of reduction of the specific fracture energy the material damage resistance decreases. The finite element method and the digital image correlation method was employed to analyze the distribution of axial, tangential, and radial stresses in the walls of cylindrical shells, as well as their effect on the overall deformability of the structures. Special attention was paid to the influence of prior material deformation and hydrogen degradation on the material resistance to fracture. The results showed that hydrogenation could significantly reduce critical strain, accelerating the fracture process, especially at high hydrogen concentration. Pri-strain plastic deformation contributes to an increase in internal damage in the metal and a substantial rise in the concentration of absorbed hydrogen, leading to the overall embrittlement of the metal and the specific fracture energy decrease.
- Open Access
- 28 June 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 8,p. 315-327
FEATURES OF THE CONSTRUCTION AND STRESS-STRAIN STATE OF CROSS REINFORCED CONCRETE BEAMS
The article substantiates the relevance and necessity of experimental and theoretical studies of reinforced concrete structures under biaxial compression.To address this task, three main types of test specimens with intersecting beam arrangements were designed, manufactured, and studied. Additionally, four types of regular beams, which make up the intersecting beams, as well as cubes and prisms for determining the actual deformation and strength characteristics of concrete, were produced.In the central part of the beams in the pure bending zone, only the lower working reinforcement was provided, which was determined based on verification calculations to ensure failure occurs in the compressed concrete. Outside the pure bending zone, upper and transverse reinforcement was provided to prevent failure in inclined sections.The geometric dimensions of the test specimens were determined considering the design of the existing power stand and the technical characteristics of the testing equipment.The behavior of the test specimens was also modeled using the "LIRA" software suite. The experimental deflection values were compared with the deflections in the percentage load range obtained in the "LIRA" software suite. The comparison shows satisfactory convergence between the experimental deflection values and those obtained in the "LIRA" software suite.The main results of the research are as follows:For the first time, experimental studies of intersecting reinforced concrete beams were conducted. Experimental deflection values (as an integral measure of deformations) of linear and intersecting beams were obtained. The stress-strain state of the test specimens was modeled using volumetric elements and the actual mechanical characteristics of concrete and reinforcement. The "LIRA" software suite provides satisfactory convergence with the experimental deflection values, which is an important integral measure of the overall deformations of bent reinforced concrete specimens. Biaxial compression affects the deformation characteristics of concrete.
- 28 June 2024
- Published by Kyiv National University of Construction and Architecture in Spatial development
- No. 8,p. 315-327
Open AccessFEATURES OF THE CONSTRUCTION AND STRESS-STRAIN STATE OF CROSS REINFORCED CONCRETE BEAMS
The article substantiates the relevance and necessity of experimental and theoretical studies of reinforced concrete structures under biaxial compression.To address this task, three main types of test specimens with intersecting beam arrangements were designed, manufactured, and studied. Additionally, four types of regular beams, which make up the intersecting beams, as well as cubes and prisms for determining the actual deformation and strength characteristics of concrete, were produced.In the central part of the beams in the pure bending zone, only the lower working reinforcement was provided, which was determined based on verification calculations to ensure failure occurs in the compressed concrete. Outside the pure bending zone, upper and transverse reinforcement was provided to prevent failure in inclined sections.The geometric dimensions of the test specimens were determined considering the design of the existing power stand and the technical characteristics of the testing equipment.The behavior of the test specimens was also modeled using the "LIRA" software suite. The experimental deflection values were compared with the deflections in the percentage load range obtained in the "LIRA" software suite. The comparison shows satisfactory convergence between the experimental deflection values and those obtained in the "LIRA" software suite.The main results of the research are as follows:For the first time, experimental studies of intersecting reinforced concrete beams were conducted. Experimental deflection values (as an integral measure of deformations) of linear and intersecting beams were obtained. The stress-strain state of the test specimens was modeled using volumetric elements and the actual mechanical characteristics of concrete and reinforcement. The "LIRA" software suite provides satisfactory convergence with the experimental deflection values, which is an important integral measure of the overall deformations of bent reinforced concrete specimens. Biaxial compression affects the deformation characteristics of concrete.
- 6 March 2024
- Published by Springer Nature
- p. 107-114
Trends of Development of Combined Steel Trusses of the New Generation
- 6 March 2024
- Published by Springer Nature
- p. 107-114
Trends of Development of Combined Steel Trusses of the New Generation
- 7 August 2022
- Published by Springer Nature
- p. 277-288
Research of Concrete Blocks Optimized by Cavity Formation
- 7 August 2022
- Published by Springer Nature
- p. 277-288
Research of Concrete Blocks Optimized by Cavity Formation
- Open Access
- 20 November 2020
- Published by Lviv Polytechnic National University in Theory and Building Practice
- Vol. 2020 (2) , 119-126
LOAD BEARING CAPACITY AND CRACKING RESISTANCE TO OFF-CENTER COMPRESSION OF HOLLOW CONCRETE BLOCKS
The research is about concrete hollow blocks that have been and still are used widely in basement wall construction. It shows that only 10… 30% of their strength is used even for mid and high-rise construction. Therefore massive foundation blocks should be made with hollows. By design, optimized blocks can be combined into the following groups: with large cavities, open from below, with vertical closed and through cavities, horizontal cavities and ribbed. The developed designs of effective blocks of walls of basements potentially give the chance to facilitate them considerably and to save concrete. However, almost of the proposed solutions have not been widely used in practice - mainly due to technological problems. It is necessary to continue the search for effective structural and technological solutions of basement wall blocks and their research. The article shows the result of experimental and theoretic research of two types of concrete blocks: FBH-1 with two top opened hollows and FBH-2 with 4 enclosed hollows. FBH-2 block has hollows with arbolite insertions. His type is efficient for basement external wall due superior thermal performance. The blocks were texted as a part of 3-storey masonry of 1.8 m height applying off-centric loads to it. Those texts allowed to get its actual strength capacity as well as cracking resistance. The load bearing capacity and cracking resistance have been calculated using a deformation method according to current codes. The method takes into account an idealized diagram of concrete stretching.The calculations according to developed method showed satisfactory matching with experimental data of load bearing capacity and cracking resistance.
- 20 November 2020
- Published by Lviv Polytechnic National University in Theory and Building Practice
- Vol. 2020 (2) , 119-126
Open AccessLOAD BEARING CAPACITY AND CRACKING RESISTANCE TO OFF-CENTER COMPRESSION OF HOLLOW CONCRETE BLOCKS
The research is about concrete hollow blocks that have been and still are used widely in basement wall construction. It shows that only 10… 30% of their strength is used even for mid and high-rise construction. Therefore massive foundation blocks should be made with hollows. By design, optimized blocks can be combined into the following groups: with large cavities, open from below, with vertical closed and through cavities, horizontal cavities and ribbed. The developed designs of effective blocks of walls of basements potentially give the chance to facilitate them considerably and to save concrete. However, almost of the proposed solutions have not been widely used in practice - mainly due to technological problems. It is necessary to continue the search for effective structural and technological solutions of basement wall blocks and their research. The article shows the result of experimental and theoretic research of two types of concrete blocks: FBH-1 with two top opened hollows and FBH-2 with 4 enclosed hollows. FBH-2 block has hollows with arbolite insertions. His type is efficient for basement external wall due superior thermal performance. The blocks were texted as a part of 3-storey masonry of 1.8 m height applying off-centric loads to it. Those texts allowed to get its actual strength capacity as well as cracking resistance. The load bearing capacity and cracking resistance have been calculated using a deformation method according to current codes. The method takes into account an idealized diagram of concrete stretching.The calculations according to developed method showed satisfactory matching with experimental data of load bearing capacity and cracking resistance.