Sandip Das
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sandip Das has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Riya Sen
Geetanjali Institute of Technical Studies, Udaipur, India
5 shared publications Soumitra Kumar Mandal
Electrical Engineering, National Institute of Technical Teachers’ Training & Research, Kolkata, India
4 shared publicationsBiswajit Jana
Electronics and Communication Engineering, University of Engineering & Management, Jaipur, India
3 shared publicationsRiya Sen
Dept. Of Electronics & Communication Engg., University of Engineering & Management, Jaipur, India
3 shared publicationsShopan Dey
University of Engineering and Management
3 shared publicationsAyon Roy
Department of Electronics and Communication Engineering, University of Engineering and Management., Jaipur, Rajasthan, India
2 shared publications
Latest Publications
- 1 July 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13) , 135342
Arithmetic-aware quantum neural networks using fault-tolerant BCD-Excess-3 encoding
Fault-tolerant quantum neural networks (QNNs) require architectures that balance learning capability with stringent non-Clifford resource constraints. This work proposes an arithmetic-aware QNN architecture that integrates a validity-controlled binary-coded decimal (BCD)-to-Excess-3 transformation as a fault-tolerant preprocessing stage prior to variational learning. The arithmetic module is realized entirely within the Clifford+T gate set and incorporates explicit BCD validity detection, enabling conditional arithmetic execution while introducing only four additional T / T † gates beyond the underlying arithmetic core. The proposed architecture is combined with a COBYLA-optimized variational ansatz and compared against a baseline QNN of identical trainable complexity. While both models achieve identical classification accuracy of 100% on the benchmark single-digit task, the arithmetic-aware architecture demonstrates superior robustness under realistic hardware noise, achieving a robustness integral of 0.080 compared to 0.071 for the baseline model. Furthermore, curvature analysis reveals a substantially flatter optimization landscape, reducing the mean curvature from 36.85 to 27.21 and indicating that the arithmetic transformation acts as an effective inductive bias that stabilizes the learning process. To evaluate scalability, an additional four-class multi-digit (00–99) classification experiment was conducted, achieving an overall accuracy of 70%. These results demonstrate that fault-tolerant arithmetic preprocessing can enhance QNN robustness and stability while maintaining bounded non-Clifford overhead, highlighting the potential of arithmetic-aware representations for robust quantum machine learning.
- 1 July 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (13) , 135342
Arithmetic-aware quantum neural networks using fault-tolerant BCD-Excess-3 encoding
Fault-tolerant quantum neural networks (QNNs) require architectures that balance learning capability with stringent non-Clifford resource constraints. This work proposes an arithmetic-aware QNN architecture that integrates a validity-controlled binary-coded decimal (BCD)-to-Excess-3 transformation as a fault-tolerant preprocessing stage prior to variational learning. The arithmetic module is realized entirely within the Clifford+T gate set and incorporates explicit BCD validity detection, enabling conditional arithmetic execution while introducing only four additional T / T † gates beyond the underlying arithmetic core. The proposed architecture is combined with a COBYLA-optimized variational ansatz and compared against a baseline QNN of identical trainable complexity. While both models achieve identical classification accuracy of 100% on the benchmark single-digit task, the arithmetic-aware architecture demonstrates superior robustness under realistic hardware noise, achieving a robustness integral of 0.080 compared to 0.071 for the baseline model. Furthermore, curvature analysis reveals a substantially flatter optimization landscape, reducing the mean curvature from 36.85 to 27.21 and indicating that the arithmetic transformation acts as an effective inductive bias that stabilizes the learning process. To evaluate scalability, an additional four-class multi-digit (00–99) classification experiment was conducted, achieving an overall accuracy of 70%. These results demonstrate that fault-tolerant arithmetic preprocessing can enhance QNN robustness and stability while maintaining bounded non-Clifford overhead, highlighting the potential of arithmetic-aware representations for robust quantum machine learning.
- 4 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (22) , 225511
Interpretable AI-assisted multi-objective optimization of a dual-channel PCF-SPR sensor for early jaundice detection
An artificial intelligence (AI)-assisted multi-objective optimization framework is presented for the systematic enhancement of a dual-channel photonic crystal fibre surface plasmon resonance biosensor designed for early-stage jaundice detection. The proposed structure employs symmetric elliptical analyte channels integrated within a microstructured cladding and coated with a gold–graphene bilayer to promote strong plasmonic confinement and enhanced biomolecular interaction. Finite element method (FEM) simulations were performed over a physiologically relevant refractive index range (1.333–1.365) corresponding to urine and serum samples with varying bilirubin concentrations. To overcome the limitations of exhaustive parametric scanning, a machine-learning framework combining Gaussian process surrogate modelling, SHapley Additive exPlanations-based interpretability analysis, and Non-dominated Sorting Genetic Algorithm II multi-objective optimization was implemented to explore the high-dimensional design space. The optimized configuration exhibits a FEM-validated wavelength sensitivity of 1892 nm RIU − 1 , compared to 1200 nm RIU − 1 and 600 nm RIU − 1 for urine and serum in the baseline design. The enhanced structure further achieves a figure of merit approaching 41 RIU − 1 with near-perfect linearity ( R 2 = 0.999 994 ). The reported performance improvement originates from optimized geometric parameters identified through the AI-assisted framework, rather than from the AI model itself. By enabling efficient exploration of the high-dimensional design space, the proposed AI-physics integration yields over 57 % sensitivity enhancement for urine samples and more than a threefold improvement for serum conditions, while preserving spectral sharpness. These findings demonstrate a scalable and interpretable optimization strategy for high-performance plasmonic biosensors, establishing a systematic pathway for AI-guided photonic device engineering.
- 4 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (22) , 225511
Interpretable AI-assisted multi-objective optimization of a dual-channel PCF-SPR sensor for early jaundice detection
An artificial intelligence (AI)-assisted multi-objective optimization framework is presented for the systematic enhancement of a dual-channel photonic crystal fibre surface plasmon resonance biosensor designed for early-stage jaundice detection. The proposed structure employs symmetric elliptical analyte channels integrated within a microstructured cladding and coated with a gold–graphene bilayer to promote strong plasmonic confinement and enhanced biomolecular interaction. Finite element method (FEM) simulations were performed over a physiologically relevant refractive index range (1.333–1.365) corresponding to urine and serum samples with varying bilirubin concentrations. To overcome the limitations of exhaustive parametric scanning, a machine-learning framework combining Gaussian process surrogate modelling, SHapley Additive exPlanations-based interpretability analysis, and Non-dominated Sorting Genetic Algorithm II multi-objective optimization was implemented to explore the high-dimensional design space. The optimized configuration exhibits a FEM-validated wavelength sensitivity of 1892 nm RIU − 1 , compared to 1200 nm RIU − 1 and 600 nm RIU − 1 for urine and serum in the baseline design. The enhanced structure further achieves a figure of merit approaching 41 RIU − 1 with near-perfect linearity ( R 2 = 0.999 994 ). The reported performance improvement originates from optimized geometric parameters identified through the AI-assisted framework, rather than from the AI model itself. By enabling efficient exploration of the high-dimensional design space, the proposed AI-physics integration yields over 57 % sensitivity enhancement for urine samples and more than a threefold improvement for serum conditions, while preserving spectral sharpness. These findings demonstrate a scalable and interpretable optimization strategy for high-performance plasmonic biosensors, establishing a systematic pathway for AI-guided photonic device engineering.
- 12 February 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Differential evolution-optimized Ni–graphene metasurface solar absorber
This paper presents a Differential Evolution (DE)-optimized Ni–graphene–AlN metasurface solar absorber designed for efficient light trapping across the 300–850[ ]THz (visible–NIR) range. The multilayer architecture, consisting of nickel rod resonators, an aluminum nitride dielectric spacer, and a graphene interlayer, was optimized using a DE algorithm that simultaneously tuned the thicknesses of all layers to maximize broadband absorption. The optimized design achieves an average absorption of 98.17%, representing a 10.17% improvement over the initial configuration. Electric field analysis reveals hybrid plasmonic coupling between localized surface plasmons in the Ni rod resonators and surface plasmon polaritons in graphene, leading to strong field confinement and impedance matching. The absorber exhibits polarization-insensitive and angularly robust performance up to [ ] and achieves approximately 45% lower computational cost than exhaustive parametric sweeps, demonstrating both high efficiency and optimization scalability.
- 12 February 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Differential evolution-optimized Ni–graphene metasurface solar absorber
This paper presents a Differential Evolution (DE)-optimized Ni–graphene–AlN metasurface solar absorber designed for efficient light trapping across the 300–850[ ]THz (visible–NIR) range. The multilayer architecture, consisting of nickel rod resonators, an aluminum nitride dielectric spacer, and a graphene interlayer, was optimized using a DE algorithm that simultaneously tuned the thicknesses of all layers to maximize broadband absorption. The optimized design achieves an average absorption of 98.17%, representing a 10.17% improvement over the initial configuration. Electric field analysis reveals hybrid plasmonic coupling between localized surface plasmons in the Ni rod resonators and surface plasmon polaritons in graphene, leading to strong field confinement and impedance matching. The absorber exhibits polarization-insensitive and angularly robust performance up to [ ] and achieves approximately 45% lower computational cost than exhaustive parametric sweeps, demonstrating both high efficiency and optimization scalability.
- Open Access
- 4 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 124 (1) , 18
Design of a Fault-Tolerant BCD to Excess-3 Code Converter Using Clifford+T Quantum Gates
Quantum computing has the potential to transform modern computation by offering exponential advantages in areas such as cryptography, optimization, and intelligent data processing. To effectively realize these advantages, particularly in fault-tolerant and Noisy Intermediate-Scale Quantum (NISQ) environments, quantum circuits must be both resource-efficient and error-resilient. This paper presents a novel Binary-Coded Decimal (BCD) to Excess-3 code converter designed exclusively using the Clifford+T gate set, which is widely supported by fault-tolerant quantum hardware. The proposed design eliminates conventional 4-bit reversible adder-based implementations and instead employs an optimized logic structure based on Clifford+T-decomposed Peres gates. By leveraging Temporary Logical-AND gates and CNOT operations, the circuit achieves reduced T-count, circuit depth, and quantum cost as key metrics in fault-tolerant quantum computation. Functional correctness is verified through IBM Qiskit, Version 2.1 simulations for all valid BCD inputs. The proposed converter serves as a scalable and hardware-compatible arithmetic building block for resource-aware and AI-oriented quantum architectures.
- 4 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 124 (1) , 18
Open AccessDesign of a Fault-Tolerant BCD to Excess-3 Code Converter Using Clifford+T Quantum Gates
Quantum computing has the potential to transform modern computation by offering exponential advantages in areas such as cryptography, optimization, and intelligent data processing. To effectively realize these advantages, particularly in fault-tolerant and Noisy Intermediate-Scale Quantum (NISQ) environments, quantum circuits must be both resource-efficient and error-resilient. This paper presents a novel Binary-Coded Decimal (BCD) to Excess-3 code converter designed exclusively using the Clifford+T gate set, which is widely supported by fault-tolerant quantum hardware. The proposed design eliminates conventional 4-bit reversible adder-based implementations and instead employs an optimized logic structure based on Clifford+T-decomposed Peres gates. By leveraging Temporary Logical-AND gates and CNOT operations, the circuit achieves reduced T-count, circuit depth, and quantum cost as key metrics in fault-tolerant quantum computation. Functional correctness is verified through IBM Qiskit, Version 2.1 simulations for all valid BCD inputs. The proposed converter serves as a scalable and hardware-compatible arithmetic building block for resource-aware and AI-oriented quantum architectures.
- 20 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (3)
SimCLR-Enhanced Transformer for Smooth and Robust Indoor VLP Trajectory Estimation
A SimCLR-Enhanced Transformer, referred to as a Contrastive Temporal Transformer (CTT), is proposed for smooth and robust indoor trajectory estimation using visible light positioning (VLP). The framework combines contrastive pretraining to learn stable received signal strength (RSS) embeddings with a Transformer-based temporal regressor to jointly optimize point-wise localization accuracy and trajectory smoothness. Experiments conducted in a controlled 5 m × 5 m × 3 m synthetic indoor environment modeled using visible light communication (VLC) channel characteristics achieve an RMSE of 0.046 m and a mean absolute error (MAE) of 0.037 m, while reducing trajectory jitter by more than 99% compared to GRU-based baselines. Robustness is evaluated under receiver orientation perturbations and first-order multipath effects, demonstrating that the proposed method maintains smooth and stable trajectories under non-ideal channel conditions, albeit with increased localization error in the presence of strong multipath. These results indicate that the CTT framework provides a promising foundation for practical VLP systems, subject to further validation using ray-traced and experimentally measured channels.
- 20 January 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (3)
SimCLR-Enhanced Transformer for Smooth and Robust Indoor VLP Trajectory Estimation
A SimCLR-Enhanced Transformer, referred to as a Contrastive Temporal Transformer (CTT), is proposed for smooth and robust indoor trajectory estimation using visible light positioning (VLP). The framework combines contrastive pretraining to learn stable received signal strength (RSS) embeddings with a Transformer-based temporal regressor to jointly optimize point-wise localization accuracy and trajectory smoothness. Experiments conducted in a controlled 5 m × 5 m × 3 m synthetic indoor environment modeled using visible light communication (VLC) channel characteristics achieve an RMSE of 0.046 m and a mean absolute error (MAE) of 0.037 m, while reducing trajectory jitter by more than 99% compared to GRU-based baselines. Robustness is evaluated under receiver orientation perturbations and first-order multipath effects, demonstrating that the proposed method maintains smooth and stable trajectories under non-ideal channel conditions, albeit with increased localization error in the presence of strong multipath. These results indicate that the CTT framework provides a promising foundation for practical VLP systems, subject to further validation using ray-traced and experimentally measured channels.
- 9 July 2024
- Published by Springer Nature in Plasmonics
- p. 1-11
Design and Numerical Analysis of a Fractal Tree Shaped Graphene Based Metasurface Solar Absorber
- 9 July 2024
- Published by Springer Nature in Plasmonics
- p. 1-11
Design and Numerical Analysis of a Fractal Tree Shaped Graphene Based Metasurface Solar Absorber
- 13 January 2024
- Published by Springer Nature in Plasmonics
- Vol. 19 (5) , 2565-2580
Design and Numerical Analysis of a PCF-SPR Sensor for Early-stage Malaria Detection
- 13 January 2024
- Published by Springer Nature in Plasmonics
- Vol. 19 (5) , 2565-2580
Design and Numerical Analysis of a PCF-SPR Sensor for Early-stage Malaria Detection
- Open Access
- 21 November 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 56 (1) , 153
Design of Photonic Crystal Fiber for 5G Communication Using COMSOL Multiphysics
Photonic crystal fibers (PCFs) have emerged as promising candidates for enabling high-performance 5G communication systems, attributed to their low loss and wide bandwidth characteristics. In this research, we leverage the capabilities of COMSOL Multiphysics v5.6 software to meticulously design a novel photonic crystal fiber (PCF) design based on Topas, featuring a rectangular air gap core with integrated slots, surrounded by a cladding composed of circular and octagon air holes. The circular air holes are arranged in square and octagon lattice structures, while the octagon air holes form a rhombic lattice. The proposed structure exhibits a high birefringence of 0.05 and low effective material loss (EML) of 0.059 cm−1 and 0.057 cm−1 at 2 THz for x and y polarization mode, respectively. Moreover, the proposed waveguide also has a low confinement loss of 10−10 and 10−11 cm−1 for x and y polarization mode. Thus, the proposed PCF structure exhibits significant potential for facilitating 5G requirements.
- 21 November 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 56 (1) , 153
Open AccessDesign of Photonic Crystal Fiber for 5G Communication Using COMSOL Multiphysics
Photonic crystal fibers (PCFs) have emerged as promising candidates for enabling high-performance 5G communication systems, attributed to their low loss and wide bandwidth characteristics. In this research, we leverage the capabilities of COMSOL Multiphysics v5.6 software to meticulously design a novel photonic crystal fiber (PCF) design based on Topas, featuring a rectangular air gap core with integrated slots, surrounded by a cladding composed of circular and octagon air holes. The circular air holes are arranged in square and octagon lattice structures, while the octagon air holes form a rhombic lattice. The proposed structure exhibits a high birefringence of 0.05 and low effective material loss (EML) of 0.059 cm−1 and 0.057 cm−1 at 2 THz for x and y polarization mode, respectively. Moreover, the proposed waveguide also has a low confinement loss of 10−10 and 10−11 cm−1 for x and y polarization mode. Thus, the proposed PCF structure exhibits significant potential for facilitating 5G requirements.
- 3 August 2023
- Published by Springer Nature in Plasmonics
- Vol. 19 (1) , 65-74
Photonic Crystal Fibre–Based Plasmon Sensor for Glucose Level Detection in Urine
- 3 August 2023
- Published by Springer Nature in Plasmonics
- Vol. 19 (1) , 65-74
Photonic Crystal Fibre–Based Plasmon Sensor for Glucose Level Detection in Urine