RTRijil Thomas

Rijil Thomas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rijil Thomas has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Benchmarking dual-polarization silicon nitride photonic integrated circuits for trapped-ion quantum technologies

    by Carl-Frederik Grimpe, Anastasiia Lüßmann-Sorokina, Guochun Du, Pragya Sah, Steffen Sauer, Elena Jordan, Rijil Thomas, Pascal Gehrmann, Maksim Lipkin, Stephan Suckow, et al.

    Trapped ions are one of the most advanced platforms for quantum technologies, with applications ranging from quantum computing to precision timekeeping. A crucial step towards more compact and scalable systems involves integrating photonic integrated circuits (PICs) into surface ion traps to enable on-chip light delivery and optical addressing of individual ions. Currently, most implementations rely solely on transverse-electric (TE) mode grating couplers, where the emitted light is polarized in the plane of the chip. In this work, we design, fabricate and characterize key silicon nitride (Si 3 N 4 ) PIC components required for scaling trapped-ion based quantum systems to multiple operating zones, including incoupling structures, splitters, and grating couplers that support both TE and transverse-magnetic (TM) modes with comparable optical losses. We benchmark the PIC at 760 nm, which is a typical wavelength for Yb + -applications. The fabricated grating couplers enable the outcoupling of collimated free-space beams for both polarizations, exhibiting distinct emission angles. This dual-polarization capability gives more flexibility in polarization control and expands the accessible optical design space for trapped-ion quantum technologies.


  • Propagation loss of monolayer MoS 2 on Si 3 N 4 waveguides at wavelengths from 1520 nm to 1620 nm

    by Avinash Kumar, Stephan Suckow, Daniel Schneider, Bartos Chmielak, Rijil Thomas, Max C Lemme

    Monolayer molybdenum disulfide (1L MoS 2 ) is a two-dimensional (2D) semiconductor with a direct electronic bandgap of 1.88 eV and large nonlinear susceptibilities. Its second-order optical nonlinearity χ (2) leads to second-harmonic generation (SHG) and a Pockels electro-optic effect. Therefore, atomically thin 1L MoS 2 has been utilized in several on-chip integrated photonic devices. However, 1L MoS 2 must be sufficiently transparent under the wavelength of operation to be power efficient and not affect device performance. Previous literature reports 20 dB/cm to 43 dB/cm of excess propagation losses in silicon waveguides (WGs) covered with 1L MoS 2 , which is too high for most applications in the infrared spectrum. Here, we experimentally investigate the infrared propagation loss in 1L MoS 2 monolithically integrated on silicon nitride (Si 3 N 4 ) WGs and racetrack resonators (RTRs). We use linear regression to determine the propagation losses via RTR resonances. The excess propagation losses in wet-transferred 1L MoS 2 on Si 3 N 4 WG encapsulated by polymethyl methacrylate are measured as less than 2 dB/cm from 1520 nm to 1620 nm. This was achieved with an evanescent field fraction of 0.03% in the 1L MoS 2 . We provide evidence that this upper boundary of the loss is not an intrinsic material property and is instead dominated by defects arising from transfer, i.e., further loss reductions via process optimization are possible.

  • Open Access

    The Impact of Field Stitching on Optical Losses in SOI Waveguides Fabricated via Electron Beam Lithography

    by Maksim Lipkin, Jashanpreet Kaur, Grigory Vydrevich, Michael Möller, Lisa Ehlert, Jens Bolten, Rijil Thomas, Stephan Suckow, Max C. Lemme

  • Photoluminescence Enhancement at Telecom Wavelengths from PbS/CdS Quantum Dots coupled to a Plasmonic Crescent Metasurface

    by Areeg Al-Hamadani, Vaibhav Gupta, José Luis Montaño-Priede, Rijil Thomas, Alina Muravitskaya, Laurent Markey, Celine Roux-Byl, Thomas Pons, Mario Zapata-Herrera, Nerea Zabala, et al.


  • Open Access

    Hardware realization of neuromorphic computing with a 4–port photonic reservoir for modulation format identification

    by Enes Şeker, Rijil Thomas, Guillermo von Hünefeld, Stephan Suckow, Mahdi Kaveh, Gregor Ronniger, Pooyan Safari, Isaac Sackey, David Stahl, Colja Schubert, et al.

    The fields of machine learning and artificial intelligence drive researchers to explore energy-efficient, brain-inspired new hardware. Reservoir computing encompasses recurrent neural networks for sequential data processing and matches the performance of other recurrent networks with less training and lower costs. However, traditional software-based neural network (NN) require high energy due to computational demands and massive data transfer needs. A hybrid photonic–electronic reservoir computing (RC) system overcomes this challenge with neuromorphic photonic integrated circuits or NeuroPICs, combining passive photonic reservoirs with electronic readout layers. Here, we introduce a hybrid photonic–electronic RC solution for modulation format identification in C-band telecommunication network monitoring. The NeuroPIC is built on a silicon-on-insulator platform featuring a 4-port reservoir architecture. We discuss the NeuroPIC design, fabrication, experimental performance, and compare it with simulations. The system incorporates nonlinearity through a simple digital readout and achieves close to 100% accuracy in identifying quadrature amplitude modulation formats transmitted over 20 km of optical fiber at a 32 Gbaud symbol rate. The NeuroPIC performance is robust against fabrication imperfections like waveguide propagation loss, phase randomization, and delay line length variations. Experimental results surpassed simulations, attributed to enhanced ‘richness’ of signal interference in the physical system. By integrating an energy-efficient photonic analog processing with electronic readout, this hybrid system reduces the dependence on fully digital NNs, offering a pathway for high-speed temporal data processing in various applications. While system-level energy metrics require further exploration, our work highlights the potential of hybrid approaches to balance performance, fabrication tolerance, and computational efficiency in real-world applications.


  • Artificial Neural Network With Photonic Reservoir for Multiclass Modulation Format Identification

    by Guillermo von Hünefeld, Mahdi Kaveh, Joseph Hopfmüller, Pooyan Safari, Enes Şeker, Rijil Thomas, Mahtab Aghaeipour, David Stahl, Stephan Suckow, Peter Bienstman, et al.

    This paper builds upon our previous work on photonic reservoir computing, presenting an enhanced artificial neural network (NN) integrated on a photonic integrated circuit (PIC) for the intelligent monitoring of optical signals. The NN employs the reservoir computing paradigm on optical signals, with a photonic reservoir and a digital readout for modulation format identification (MFI). Our focus is on the identification of dual-polarized wavelength-division multiplexing (WDM) signals with symbol rates between 32 and 35 GBd, covering modulation formats including 4QAM, and 16QAM. Experimental results demonstrate the system's robust MFI capabilities, achieving high accuracy across various signal formats. These findings highlight the potential of integrated photonic NNs in enhancing the performance and efficiency of optical communication systems.


  • Nanomechanical Microfluidic Mixing and Rapid Labeling of Silica Nanoparticles using Allenamide-Thiol Covalent Linkage for Bioimaging

    by Sivaramapanicker Sreejith, Rahul Kishor, Ata Abbas, Rijil Thomas, Trifanny Yeo, Vivek Damodar Ranjan, Ramanathan Vaidyanathan, Yen Peng Seah, Bengang Xing, Zhenfeng Wang, et al.

    Rapid surface functionalization of nanomaterials using covalent linkage following ‘green chemistry’ remains challenging and the quest for developing simple protocols are persisting. We report a nanomechanical microfluidic approach for the coupling of allenamide functionalized organic derivatives on the surface of thiol modified silica nanoparticles using allenamide-thiol chemistry. The coupling principle involves the use of a microfluidic surface acoustic wave (SAW) device that generates acoustic streaming based chaotic fluid micromixing that enables mixing of laterally flowing fluids containing active components. This approach was used to demonstrate the direct surface labeling of thiol modified silica nanoparticles using a selected group of modified fluorescence tags containing allenamide handles and achieved a total efficiency of 83-90 %. This green approach enabled a highly efficient surface functionalization in aqueous conditions, with tunable control over the conjugation process via the applied field. The dye labelled silica particles were characterized using various analytical techniques and found to be biocompatible with a potential in live cell bioimaging. It is envisaged that this bioconjugation strategy will find numerous applications in the field of bioimaging and drug delivery.


  • Light intensity field enhancement (LIFE) induced localized edge abrasion of silica-coated silver nanoprisms

    by Rijil Thomas, Soo Zeng Fiona Phua, Sivaramapanicker Sreejith, Yanli Zhao, Cheong Boon Soh

    Silver nanoprisms (AgNPrs) exhibit localized surface plasmon resonance (LSPR) in the near infrared (NIR) region of the electromagnetic spectrum. LSPR-driven electric field enhancement around AgNPr edges has been investigated in various studies. A coating of dielectric materials such as silica on the surface of the AgNPrs is employed to extend the application of these nanoparticles under biocompatible conditions and to increase the thermal stability. Upon interactions with optical excitation (pulsed laser excitation), the AgNPrs undergo light intensity field enhancement (LIFE) at the corners. In the cases of hybrid hetero-structures of AgNPrs with silica coatings (AgNPr@SiO2), LIFE leads to nano-structural deformations. In this study, we demonstrate that, depending on the intensity of the light excitation, the medium properties and the geometrical sharpness of the corners of the prisms, LIFE could induce localized damage or abrasion at the edges of the immediate dielectric contact, which in this case was the silica coating. A theoretical study was conducted to establish the influence of the finite radius of curvature (ROC) of the corners on the plasmonic interactions to generate LIFE during optical excitation. Experiments were performed on AgNPr@SiO2 using nanosecond pulsed laser excitation at 900 nm and electron microscopic analysis of the nanostructures revealed the localized edge abrasion of the silica at the prism corners. To further study the effect of the direct plasmonic excitation during LIFE, pulsed laser excitation on ultra-thin graphene oxide (GO) wrapped AgNPr@SiO2 (GO-AgNPr@SiO2) was conducted. Due to the GO wrapping and subsequent changes in light absorption, the extent of the LIFE at the corners diminishes, which leads to structural stability and preservation of the hetero-structure morphology.


  • Classification of severity of mitral regurgitation patients using multifractal analysis

    by Rijil Thomas, Ling Lieng Hsi, Soh Cheong Boon, Erry Gunawan

    Owing to its efficiency and cost effectiveness, auscultation using a stethoscope is the primary diagnosis method preferred by most medical examiners for cardiovascular disease. Phonocardiography (PCG) is the next level of auscultation and an effective analysis technique in cardiology. This paper presents a method to quantify Mitral Regurgitation (MR) using PCG. MR is one of the most common cardiovascular diseases associated with a defect in mitral valve. We analyzed the multifractal nature of heart sounds with murmur followed by classification and clustering using Hurst exponents. Thus, we were able to project the difference between severities of MR patients by correlating the complexity of heart sounds from four major auscultation sites, using a complexity analysis tool called singularity spectra. The simulation results show that the method can quantify the severity of MR using PCG.


  • Heart sound segmentation using fractal decomposition

    by Rijil Thomas, Ling Lieng Hsi, Soh Cheong Boon, Erry Gunawan

    In order to assist cardiac diagnosis by phonocardiography, the automated identification of fundamental heart sounds for heart beat segmentation in a cardiac cycle plays a significant role in signal processing. Recent advancements in signal processing have also shown the potential of multifractality in biomedical applications. Hence, in this paper, the multifractal property of heart sounds is utilized to identify first and second heart sounds. The root mean square (rms) fluctuation used to obtain multifractal/singularity spectrum is used to decompose the heart sound into its own fractally-important components in time domain along with simultaneous Gaussianity test to filter out fundamental components. The performance is evaluated on an experimental database of 23 different heart sounds and 6 patients' recordings done in a real clinical environment. Simulation results have shown that it is a promising approach in Heart Sound Segmentation (HSS).