FDFenghua Ding

Fenghua Ding

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fenghua Ding has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Pressure-Induced Three- to Two-Dimensional Structural Transition in Light Lanthanide Trichlorides

    by Fenghua Ding, Qian Wang, Danilo Puggioni, Jacob Lafferty, Shohei Kawanishi, Tong Zhu, Zhen Wu, Zhang Lin, James M. Rondinelli, Hiroshi Kageyama

    Rare-earth chlorides exhibit three polymorphs at ambient pressure, among which the UCl3-type three-dimensional (3D) framework with 9-fold Ln coordination is the dominant structural motif for the light lanthanides. Here, we report the high-pressure synthesis and structural characterization of LnCl3 (Ln = La, Ce, Pr, Nd, Gd, and Y) obtained at 5 GPa and 1000 °C. All high-pressure polymorphs adopt the two-dimensional (2D) NdBr3-type structure (Cmcm) built from LnCl8 polyhedra. For YCl3, the ambient-pressure AlCl3-type phase (CN = 6) transforms into the NdBr3-type structure (CN = 8) under compression. In contrast, La-Gd trichlorides undergo an unusual reduction from CN = 9 to 8. This counterintuitive behavior is rationalized by pressure-induced Ln-Cl bond shortening, which maintains reasonable bond-valence sums, together with enhanced packing density arising from pronounced out-of-plane contraction, as supported by density functional theory (DFT) calculations. These results demonstrate that high pressure can stabilize recoverable 2D polymorphs, expanding the compositional space of NdBr3-type layered structures and offering opportunities for the exploration of functional van der Waals-type materials.

  • Te2-Regulated Black Arsenic Phosphorus Monocrystalline Film with Excellent Uniformity for High Performance Photodetection

    by Jiaqi Song, Yanjie Liang, Fenghua Ding, Yong Ke, Yun Li, Yunyan Wang, Xiangheng Liu, Zhenxing Liu, Xinting Lai, Jia Zhou, et al.

    Two-dimensional (2D) black arsenic phosphorus (b-AsP) material has been attracting considerable attention for its extraordinary properties. However, its application in large-scale device fabrication remains challenging due to the limited scale and irregular shape. Here, we found the special effect of Te2 upon growth of b-AsP and developed a novel Te2-regulated steady growth (Te-SG) strategy to obtain high-quality b-AsP single crystal. The large-scale b-AsP single crystal sheet with its full width at half-maximum (FWHM) being ≤0.05° was achieved for the first time. The b-AsP monocrystalline film with atomic-level flat surface was further fabricated by laser, which exhibits outstanding self-powered characteristics under various light illumination, including low dark current and peak room-temperature detectivity of 8.5 × 1010 cm Hz1/2 W-1. The excellent uniformity was also revealed through a large-plane b-AsP photodetector. This work paves a new way for the application of high-performance electronics and optoelectronics based on b-AsP.


  • Open Access

    The Crystal Structure of BaZn2Se2(OH)2 Featuring Brownmillerite‐Type Layers

    by Chi Zhang, Yiran Wang, Kendall R. Kamp, Lauren N. Walters, Fenghua Ding, James M. Rondinelli, Kenneth R. Poeppelmeier

    A bimetallic hydroxychalcogenide, BaZn2Se2(OH)2, was synthesized through hydrothermal pouch methods. The single crystal X‐ray diffraction and electron diffraction indicates that the phase crystallizes in the orthorhombic space group Pnma and is composed of anionic layers [ZnSe3/3(OH)1/1]− that are separated and charged balanced by Ba2+ cations. The [ZnSe3/3(OH)1/1]– layer comprises two unique Zn sites, which form interpenetrating zigzag chains with an in‐plane dipole moment and adopts a brownmillerite‐type structural motif. The adjacent layers contain tetrahedrally coordinated Zn chains of opposite handedness related by an inversion center, which cancel the microscopic dipoles to minimize the macroscopic electric polarization. The adoption of a brownmillerite structural motif in BaZn2Se2(OH)2 can be rationalized by the distinct charge difference between Se2− and OH− anions, which creates a sufficient dipole moment in the ZnSe3(OH) tetrahedra to allow the occurrence of twisted chains. FTIR spectroscopy confirms the existence of OH− anions and DFT calculations indicate that BaZn2Se2(OH)2 is a semiconductor with a direct band gap. This work expands the chemistry of the brownmillerite family from traditional homoanionic oxides to multianion hydroxychalcogenides, offering a new opportunity to explore tunable structural complexity for better design of functional materials.

  • Reinforced photoinduced behavior of a low-cost mechanochemical synthesized Fe-doped B12As2 nanocrystals

    by Zhenxing Liu, Zhan Hu, Faxiong Li, Xinting Lai, Yuan Zhou, Jiaqi Song, Zhihui Yang, Cong Peng, Fenghua Ding, Junfang Nan, et al.


  • Top Cited Papers

    NaRb6(B4O5(OH)4)3(BO2) Featuring Noncentrosymmetry, Chirality, and the Linear Anionic Group BO2–

    by Fenghua Ding, Kent J. Griffith, Weiguo Zhang, Shaoxin Cui, Chi Zhang, Yiran Wang, Kendall Kamp, Hongwei Yu, P. Shiv Halasyamani, Zhihua Yang, et al.

    Noncentrosymmetric (NCS) structures are of particular interest owing to their symmetry-dependent physical properties, e.g., pyroelectricity, ferroelectricity, piezoelectricity, and nonlinear optical (NLO) behavior. Among them, chiral materials exhibit polarization rotation and host topological properties. Borates often contribute to NCS and chiral structures via their triangular [BO3] and tetrahedral [BO4] units and their numerous superstructure motifs. However, no chiral compound with the linear [BO2] unit has been reported to date. Herein, an NCS and chiral mixed-alkali-metal borate, NaRb6(B4O5(OH)4)3(BO2), with a linear BO2- unit in the structure was synthesized and characterized. The structure features a combination of three types of basic building units (BBUs), [BO2], [BO3], and [BO4] with sp-, sp2-, and sp3-hybridization of boron atoms, respectively. It crystallizes in the trigonal space group R32 (No. 155), one of the 65 Sohncke space groups. Two enantiomers of NaRb6(B4O5(OH)4)3(BO2) were found, and their crystallographic relationships are discussed. These results not only expand the small family of NCS structures with the rare linear BO2- unit but also prompt recognition to the fact that NLO materials have generally overlooked the existence of two enantiomers in achiral Sohncke space groups.


  • Low Thermal Conductivity in Heteroanionic Materials with Layers of Homoleptic Polyhedra

    by Chi Zhang, Jiangang He, Rebecca McClain, Hongyao Xie, Songting Cai, Lauren N. Walters, Jiahong Shen, Fenghua Ding, Xiuquan Zhou, Christos D. Malliakas, et al.

    Although BiAgOSe, an analogue of a well-studied thermoelectric material BiCuOSe, is thermodynamically stable, its synthesis is complicated by the low driving force of formation from the stable binary and ternary intermediates. Here we have developed a “subtraction strategy” to suppress byproducts and produce pure phase BiAgOSe using hydrothermal methods. Electronic structure calculations and optical characterization show that BiAgOSe is an indirect bandgap semiconductor with a bandgap of 0.95 eV. The prepared sample exhibits lower lattice thermal conductivities (0.61 W·m–1·K–1 at room temperature and 0.35 W·m–1·K–1 at 650 K) than BiCuOSe. Lattice dynamical simulations and variable temperature diffraction measurements demonstrate that the low lattice thermal conductivity arises from both the low sound velocity and high phonon–phonon scattering rates in BiAgOSe. These in turn result primarily from the soft Ag–Se bonds in the edge-sharing AgSe4 tetrahedra and large sublattice mismatch between the quasi-two-dimensional [Bi2O2]2+ and [Ag2Se2]2– layers. These results highlight the advantages of manipulating the chemistry of homoleptic polyhedra in heteroanionic compounds for electronic structure and phonon transport control.


  • Open Access

    Enhancing the Anti-Oxidation of Vapor Crystallized Arsenic Crystals Via Introducing Iodine

    by Zhenxing Liu, Xinting Lai, Yuan Zhou, Fangjie Deng, Jiaqi Song, Zhihui Yang, Cong Peng, Fenghua Ding, Zhan Hu, Yanjie Liang

    Arsenic oxidation restricts applications of arsenic in high-performance electronic devices and functional materials. Herein, a removable iodine-regulated method is proposed for the first time to enhance the anti-oxidation of arsenic. In a gradient of 500 – 650℃, 0.6at% – 5.0at% of iodine is introduced into arsenic vapor to regulate arsenic crystal. The oxygen extent of regulated arsenic crystal is less than 2.5 at% after exposure under ambient conditions for 96h, lower by over 90% compared with the control group. Surface residual iodine suppresses the oxidation through the As-I 2 state barrier, even at ~0.3at%. First-principles calculation reveals that the adsorption As-I 2 state weakens the delocalization of lone-pair electrons and reduces the oxidation activity of the arsenic surface. The anti-oxidation is also related to the exposing facet characteristics of arsenic. Iodine regulation stabilizes the regulated crystal surface, predominant (003) or (012) facets with the surface energy of 22.4 meV and 47.6 meV, respectively. The iodine passivation on stabilized surfaces synergistically enhances the anti-oxidation of arsenic further. Moreover, heating treatment at 200℃ recovers the purity of regulated arsenic without variation of structure, leaving the surface iodine below 0.1at%. The improved anti-oxidation of arsenic preserves resources for further advanced applications.

  • Perovskite-like K3TiOF5 Exhibits (3 + 1)-Dimensional Commensurate Structure Induced by Octahedrally Coordinated Potassium Ions

    by Fenghua Ding, Nenian Charles, Jaye K. Harada, Christos D. Malliakas, Chi Zhang, Roberto dos Reis, Kent J. Griffith, Matthew L. Nisbet, Weiguo Zhang, P. Shiv Halasyamani, et al.

    Elpasolite- and cryolite-type oxyfluorides can be regarded as superstructures of perovskite and exhibit structural diversity. While maintaining a similar structural topology with the prototype structures, changes in the size, electronegativity, and charge of cation and/or anion inevitably lead to structural evolution. Therefore, the nominal one-to-one relation suggested by a doubled formula of perovskite does not guarantee a simple 2-fold superstructure for many cases. Herein, the commensurately modulated perovskite-like K3TiOF5 was refined at 100 K from single-crystal X-ray diffraction data by using a pseudotetragonal subcell with lattice parameters of a = b = 6.066(2) Å and c = 8.628(2) Å. The length of the modulation vector was refined to 0.3a* + 0.1b* + 0.25c*. In the commensurate supercell of K3TiOF5, the B-site Ti4+ and K+ cations in [TiOF5]3– and [KOF5]6– octahedral units were found to be significantly displaced from the average atomic positions refined in the subcell. The displacements of the K+ cations are ±0.76 Å, and those for the Ti4+ cations are approximately ±0.13 Å. One- and two-dimensional solid-state 19F NMR measurements revealed two tightly clustered groups of resonances in a ratio of ca. 4:1, assigned to equatorial and axial fluorine, respectively, consistent with local [TiOF5]3– units. S/TEM results confirmed the average structure. Electronic structure calculations of the idealized I4mm subcell indicate the instability to a modulated structure arises from soft optical modes that is controlled by the octahedrally coordinated B-site potassium ions in the cryolite-type structure.


  • Multimodal Structure Solution with 19F NMR Crystallography of Spin Singlet Molybdenum Oxyfluorides

    by Fenghua Ding, Kent J. Griffith, Can P. Koçer, Richard J. Saballos, Yiran Wang, Chi Zhang, Matthew L. Nisbet, Andrew J. Morris, James M. Rondinelli, Kenneth R. Poeppelmeier

    Complex crystal structures with subtle atomic-scale details are now routinely solved using complementary tools such as X-ray and/or neutron scattering combined with electron diffraction and imaging. Identifying unambiguous atomic models for oxyfluorides, needed for materials design and structure–property control, is often still a considerable challenge despite their advantageous optical responses and applications in energy storage systems. In this work, NMR crystallography and single-crystal X-ray diffraction are combined for the complete structure solution of three new compounds featuring a rare triangular early transition metal oxyfluoride cluster, [Mo3O4F9]5–. After framework identification by single-crystal X-ray diffraction, 1D and 2D solid-state 19F NMR spectroscopy supported by ab initio calculations are used to solve the structures of K5[Mo3O4F9]·3H2O (1), K5[Mo3O4F9]·2H2O (2), and K16[Mo3O4F9]2[TiF6]3·2H2O (3) and to assign the nine distinct fluorine sites in the oxyfluoride clusters. Furthermore, 19F NMR identifies selective fluorine dynamics in K16[Mo3O4F9]2[TiF6]3·2H2O. These dual scattering and spectroscopy methods are used to demonstrate the generality and sensitivity of 19F shielding to small changes in bond length, on the order of 0.01 Å or less, even in the presence of hydrogen bonding, metal–metal bonding, and electrostatic interactions. Starting from the structure models, the nature of chemical bonding in the molybdates is explained by molecular orbital theory and electronic structure calculations. The average Mo–Mo distance of 2.505 Å and diamagnetism in 1, 2, and 3 are attributed to a metal–metal bond order of unity along with a 1a21e4 electronic ground state configuration for the [Mo3O4F9]5− cluster, leading to a rare trimeric spin singlet involving d2 Mo4+ ions. The approach to structure solution and bonding analysis is a powerful strategy for understanding the structures and chemical properties of complex fluorides and oxyfluorides.


  • NaRb3B6O9(OH)3(HCO3): A Borate-Bicarbonate Nonlinear Optical Material

    by Fenghua Ding, Weilong Zhang, Matthew L. Nisbet, Weiguo Zhang, P. Shiv Halasyamani, Zhihua Yang, Shilie Pan, Kenneth R. Poeppelmeier

    A noncentrosymmetric mixed alkali metal borate–bicarbonate, NaRb3B6O9(OH)3(HCO3), was synthesized and characterized. The compound crystallizes in the monoclinic space group P21 (No. 4) with a = 8.988(3) Å, b = 8.889(2) Å, c = 10.068(4) Å, and β = 114.6(4)°. The structure features a combination of chains of boron–oxygen [B6O9 (OH)3]3– groups and isolated HCO3– groups, with charge compensation provided by Rb+ and Na+ cations. It exhibits a second harmonic generation response of about 0.5 × KDP. The UV–vis–NIR absorption spectrum indicated a transparency of about 40% at 200 nm. The IR spectrum confirms the coordination environments of anionic groups, and thermogravimetric measurements indicate the material is thermally stable up to approximately 320 °C. Additionally, first-principles calculations were performed in order to gain insight into the role of boron–oxygen and HCO3– groups with respect to the band structure and NLO properties.