NTNils Tippkötter

Nils Tippkötter

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nils Tippkötter has a total of 160 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    From Batch to Pilot Scale: Continuous Biohydrogen Production from Potato Peel Residues by Thermotoga neapolitana

    by Fabian Moll, Julian Tix, Felix Pohl, Nils Tippkötter

    The transition to a sustainable hydrogen economy requires renewable production processes based on biomass and industrial waste streams. Thermophilic dark fermentation using the microorganism Thermotoga neapolitana is a promising approach because it can achieve hydrogen yields close to the theoretical maximum. This microorganism can also utilize starchy waste materials, such as potato peels, without extensive pretreatment. In this study, potato peel residues with a combined starch plus cellulose content of approximately 64% on a dry-matter basis were used as substrate for biohydrogen production. During scale-up from a 1 L laboratory reactor to a 50 L pilot-scale reactor, comparable fermentation profiles were obtained at both reactor scales. A substrate specific yield of 297 ± 11 NL H2·kg−1 dm (26.5 ± 1.0 g H2·kg−1 dm) of potato peel residues was produced. Furthermore, continuous operation at laboratory-scale demonstrated that the peak performance observed in batch fermentation could be maintained over an extended period. Taken together, these results demonstrate the potential for scale-up and continuous biohydrogen production from starch-rich waste streams such as potato peel residues.

  • Open Access

    The Evolution of Cellulose Crystallinity During the Entire Wheat Straw Organosolv Biorefinery Process and Its Relationship with Enzymatic Hydrolysis

    by Tianyi Guo, Luisa Alzer, Tong Niu, Christian Dirksen, Nils Tippkötter

    Cellulose crystallinity is frequently associated with lignocellulosic biomass digestibility, yet its development during multistep biorefinery processing and its relationship with enzymatic hydrolysis remain difficult to isolate. This study investigated the evolution of cellulose crystallinity in wheat straw (Triticum aestivum) during Hot-Water Pretreatment (HWP), Water Pretreatment (WP), Organosolv extraction, sequential washing, and drying, and related these changes to enzymatic glucose yield. Crystallinity was determined using X-ray diffraction and an ATR-FTIR-based PLS model, while enzymatic hydrolysis was evaluated by HPLC-based glucose quantification. HWP caused a temperature-dependent decrease in crystallinity from 47.5 ± 1.3% in untreated straw to 27.0 ± 2.2% at 120 °C, whereas WP at room temperature caused no significant change. However, without subsequent Organosolv extraction, both pretreatments alone resulted in low glucose yields of approximately 10%, indicating that cellulose crystallinity is only one of several factors governing enzymatic hydrolysis efficiency. During washing after Organosolv extraction, crystallinity increased from 40.6 ± 2.1% to 54.2 ± 1.3%, whereas, under the tested conditions, glucose yield was more closely associated with the estimated residual ethanol concentration than with the change in crystallinity. Drying had the strongest effect, increasing crystallinity by up to 53.6% relative to the wet state. Overall, cellulose crystallinity should be considered as one of several interacting factors governing enzymatic digestibility, and sample moisture history must be carefully controlled when comparing crystallinity data.

  • Open Access

    The Evolution of Cellulose Crystallinity During the Entire Wheat Straw Organosolv Biorefinery Process and Its Relationship with Enzymatic Hydrolysis

    by Tianyi Guo, Luisa Alzer, Tong Niu, Christian Dirksen, Nils Tippkötter

    Cellulose crystallinity is frequently associated with lignocellulosic biomass digestibility, yet its development during multistep biorefinery processing and its relationship with enzymatic hydrolysis remain difficult to isolate. This study investigated the evolution of cellulose crystallinity in wheat straw (Triticum aestivum) during Hot-Water Pretreatment (HWP), Water Pretreatment (WP), Organosolv extraction, sequential washing, and drying, and related these changes to enzymatic glucose yield. Crystallinity was determined using X-ray diffraction and an ATR-FTIR-based PLS model, while enzymatic hydrolysis was evaluated by HPLC-based glucose quantification. HWP caused a temperature-dependent decrease in crystallinity from 47.5 ± 1.3% in untreated straw to 27.0 ± 2.2% at 120 °C, whereas WP at room temperature caused no significant change. However, without subsequent Organosolv extraction, both pretreatments alone resulted in low glucose yields of approximately 10%, indicating that cellulose crystallinity is only one of several factors governing enzymatic hydrolysis efficiency. During washing after Organosolv extraction, crystallinity increased from 40.6 ± 2.1% to 54.2 ± 1.3%, while glucose yield was more closely associated with residual ethanol under the tested conditions rather than by crystallinity changes. Drying had the strongest effect, increasing crystallinity by up to 53,6% relative to the wet state. Overall, cellulose crystallinity should be considered as one of several interacting factors governing enzymatic digestibility, and sample moisture history must be carefully controlled when comparing crystallinity data.

  • Open Access

    Water-Based Pretreatment Combined with Severity-Optimized Organosolv Enables Near-Complete Enzymatic Hydrolysis of Wheat Straw at Reduced Energy Demand

    by Tianyi Guo, David Thielen, Malik Aydin, Nils Tippkötter

    Wheat straw is an abundant agricultural residue with high potential for carbohydrate-based bioconversion, yet its efficient utilization is limited by lignocellulosic recalcitrance. This study systematically investigated Organosolv extraction of wheat straw (Triticum aestivum) with the goal of achieving near-complete enzymatic hydrolysis at minimized process severity and energy demand. Process severity was evaluated using the P-Factor concept. In preliminary screening, acid catalysts and liquor ratios were assessed. Strong acids clearly outperformed weak acids: at comparable severity, 5% (w/w, DM) H2SO4 or p-toluenesulfonic acid (PTSA) yielded glucose yields of 83 ± 2.4% and 81 ± 6.2%, respectively, whereas weak acids (phosphoric, lactic, acetic) and a catalyst-free control resulted in only ~20–41% glucose yield. Liquor ratio strongly affected extraction performance; a ratio of 1:19 provided the highest glucose yield (85 ± 1.4%) and robust mixing compared to 1:12–1:15 (67–68%). Two novel pretreatment strategies applied prior to Organosolv extraction, namely Hot-Water Pretreatment (HWP) and Water Pretreatment (WP), significantly increased hydrolysability compared to untreated straw (58 ± 3%), reaching 79 ± 2% for HWP and 86 ± 5% for WP. DoE-based experiments (135–170 °C; P-Factor 3.0–4.0) showed that increasing temperature from 135 to 150 °C markedly improved hydrolysability (e.g., WP: 74 ± 3% to 96 ± 3%), while further increasing to 170 °C provided no additional benefit. Response-surface modeling predicted a maximum hydrolysability of approximately 88% for HWP but complete hydrolysis for WP within 152–170 °C, indicating a broad operational window. Overall, combining simple Water-based Pretreatment with severity-optimized Organosolv extraction enables energy-efficient, near-complete hydrolysis at lower operating temperatures, reducing both energy demand and pressure requirements, and thereby offering advantages in process cost and scalability.


  • Open Access

    Water-Based Pretreatment Combined with Severity-Optimized Organosolv Enables Near-Complete Enzymatic Hydrolysis of Wheat Straw at Reduced Energy Demand

    by Tianyi Guo, David Thielen, Malik Aydin, Nils Tippkötter

    Wheat straw is an abundant agricultural residue with high potential for carbohydrate-based bioconversion, yet its efficient utilization is limited by lignocellulosic recalcitrance. This study systematically investigated Organosolv extraction of German wheat straw with the goal of achieving near-complete enzymatic hydrolysis at minimized process severity and energy demand. Process severity was evaluated using the P-Factor concept. In preliminary screening, acid catalysts and liquor ratios were assessed. Strong acids clearly outperformed weak acids: at comparable severity, 5% (w/w, DM) H2SO4 or p-toluenesulfonic acid (PTSA) yielded glucose yields of 83 ± 2.4% and 81 ± 6.2%, respectively, whereas weak acids (phosphoric, lactic, acetic) and a catalyst-free control resulted in only ~20–41% glucose yield. Liquor ratio strongly affected extraction performance; a ratio of 1:19 provided the highest glucose yield (85 ± 1.4%) and robust mixing compared to 1:12–1:15 (67–68%). Two novel pretreatment strategies applied prior to Organosolv extraction, namely hot-water pretreatment (HWP) and water pretreatment (WP), significantly increased hydrolysability compared to untreated straw (58 ± 3%), reaching 79 ± 2% for HWP and 86 ± 5% for WP. DOE-based experiments (135–170 °C; P-Factor 3.0–4.0) showed that increasing temperature from 135 to 150 °C markedly improved hydrolysability (e.g., WP: 74 ± 3% to 96 ± 3%), while further increase to 170 °C provided no additional benefit. Response-surface modeling predicted a maximum hydrolysability of approximately 88% for HWP but complete hydrolysis for WP within 152–170 °C, indicating a broad operational window. Overall, combining simple pretreatment with severity-optimized Organosolv extraction enables energy-efficient, near-complete enzymatic hydrolysis of wheat straw.


  • Open Access

    Enhanced Succinate Production in Actinobacillus succinogenes via Neutral Red Bypass Reduction in a Novel Bioelectrochemical System

    by Julian Tix, Fernando Pedraza, Roland Ulber, Nils Tippkötter

    Carbon capture and power-to-X are becoming increasingly relevant in the context of decarbonization and supply security. Actinobacillus succinogenes is capable of transforming CO2 into succinate, whereby product formation is significantly limited by the availability of NADH. The aim of this work was to further develop a bioelectrochemical system (BES) in order to provide additional reduction equivalents and thus increase yield and titer. To this end, a new BES configuration was established. A conventional stirred tank reactor (STR) is coupled via a bypass to an H-cell, in which the redox mediator neutral red (NR) is electrochemically reduced and then returned back to the bioreactor. The indirect electron transfer decouples the electrochemical reduction from the biology and results in increased intracellular availability of NADH. The present approach resulted in an increase in yield from 0.64 g·g−1 to 0.76 g·g−1, corresponding to an increase of 18%. At the same time, a titer of 16.48 ± 0.19 g·L−1 was achieved in the BES, compared to 12.05 ± 0.18 g·L−1 in the control. The results show that the mediator-assisted, partially decoupled BES architecture significantly improves CO2-based succinate production and opens up a scalable path to the use of renewable electricity as a reduction source in power-to-X processes.


  • Open Access

    Enhanced Biohydrogen Production Through Continuous Fermentation of Thermotoga neapolitana: Addressing By-Product Inhibition and Cell Viability in Different Bioreactor Modes

    by Fabian Moll, Leon Hansen, Julian Tix, Nils Tippkötter

    This study investigates the efficient biogenic production of hydrogen via the thermophilic bacterium Thermotoga neapolitana, focusing on optimising process configurations to maximise yield and productivity. To determine optimal conditions, a 1 L anaerobic bioreactor with online gas analytics was designed and tested for batch, fed-batch and continuous fermentation. A maximum hydrogen production rate of 96.1 ± 1.7 Nml·L−1·h−1 was observed in the continuous reactor. The optimal dilution rate was 0.07 h−1. Each dilution rate was kept for ≥56 h fermentation time and resulted in yields of 2.7–3.0 molH2·molglucose−1. A consistently high cell viability (97%) was also observed across various dilution rates. A detailed carbon balance indicates acetate as the main by-product, closely linked to the hydrogen production pathway. Compared to fed batch and batch, the hydrogen production rate could be increased and remain constant over a longer time. In this way the continuous reactor design showed an additional method to produce hydrogen to the established ones. Fermentative hydrogen production is particularly promising when using carbohydrate containing biomass and biowaste, as it can be considered carbon dioxide neutral.


  • Open Access

    Enhanced Biohydrogen Production Through Continuous Fermentation of Thermotoga neapolitana: Addressing By-Product Inhibition and Cell Viability in Different Bioreactor Modes

    by Fabian Moll, Leon Hansen, Julian Tix, Nils Tippkötter

    Hydrogen has emerged as a leading candidate due to its high energy density and potential for climate-friendly production. Unlike fossil fuels, hydrogen can be produced sustainably and without direct greenhouse gas emissions. This study investigates the efficient biogenic production of hydrogen via the thermophilic bacterium Thermotoga neapolitana, focusing on optimising process configurations to maximise yield and productivity. To determine optimal conditions, a 1 l anaerobic bioreactor with online gas analytics was designed. The evaluated processing modes included continuous, fed batch and batch. A maximum hydrogen production rate of 96.1 ± 1.7 Nml·l−1·h−1 was observed in the continuous reactor. The optimal dilution rate was 0.07 h−1. A consistently high cell viability (97%) was also observed across various dilution rates. A detailed carbon balance indicates acetate as the main by-product, closely linked to the hydrogen production pathway. Compared to fed batch and batch, the hydrogen production rate could be increased and hold over longer time. In this way the continuous reactor design showed an additional method to produce hydrogen to the established ones. Fermentative hydrogen production is particularly promising when using carbohydrate containing biomass and biowaste, as it can be considered carbon dioxide neutral.


  • Open Access

    Actinobacillus succinogenes in Bioelectrochemical Systems: Influence of Electric Potentials and Carbon Fabric Electrodes on Fermentation Performance

    by Julian Tix, Jan-Niklas Hengsbach, Joshua Bode, Fernando Pedraza, Julia Willer, Sei Jin Park, Kenneth F. Reardon, Roland Ulber, Nils Tippkötter

    The fermentation of Actinobacillus succinogenes in bioelectrochemical systems offers a promising approach to enhance biotechnological succinate production by shifting the redox balance towards succinate and simultaneously enabling CO2 utilization. Key process parameters include the applied electric potential, electrode material, and reactor design. This study investigates the influence of various carbon fabric electrodes and applied potentials on product distribution during fermentation of A. succinogenes. Building on prior findings that potentials between −600 mV and –800 mV increase succinate production, recent data reveal that more negative potentials, beyond the water electrolysis threshold, trigger electrochemical side reactions, altering product yields. Specifically, succinate decreased from 19.76 ± 0.41 g∙L−1 to 14.1 ± 1.6 g∙L−1, while lactate rose from 0.59 ± 0.12 g∙L−1 to 3.12 ± 0.21 g∙L−1. Contrary to common assumptions, the shift is not primarily driven by oxygen formation. Instead, the results indicate that the intracellular redox potential is affected by both the applied potential and hydrogen evolution, which alters metabolic pathways to maintain redox balance. These findings demonstrate that more negative applied potentials in electro-fermentation processes can impair succinate yields, emphasizing the importance of fine-tuning electrochemical conditions in the system for optimized biotechnological succinate production.