DYDavid Y. Yang

David Y. Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David Y. Yang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:

  • Dan M. Frangopol

    Professor and the Fazlur R. Khan Endowed Chair of Structural Engineering and Architecture, Dept. of Civil and Environmental Engineering, Advanced Technology for Large Structural Systems Engineering Research Center, Lehigh Univ., 117 ATLSS Dr., Bethlehem, PA 18015-4729

    20 shared publications
  • Dan M. Frangopol

    Department of Civil and Environmental Engineering, ATLSS Center, Lehigh University

    9 shared publications
  • J.G. Teng

    4 shared publications
  • Liang Liu

    Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Advanced Technology for Large Structural Systems Engineering Research Center, Lehigh Univ., 117 ATLSS Dr., Bethlehem, PA 18015-4729

    3 shared publications
  • Xu Han

    3 shared publications
  • Jaap Bakker

    2 shared publications

Latest Publications

  • Open Access

    Understanding Structural Risk: Seismic Demand for Low-Fill Slender Fuel Tanks

    by David Yang, Sam Anderson

    Older fuel storage tanks, such as those in Oregon's CEI Hub, present significant seismic vulnerabilities, prompting proposals to limit storage capacity as a transitional risk mitigation measure before more permanent retrofitting actions. However, a critical knowledge gap exists regarding the applicability of standard analysis methods, like API 650, to low-fill conditions. This study utilizes the Veletsos-Yang iterative fluid-tank interaction procedure to evaluate the seismic demand of low-fill slender tanks. The analysis reveals that low-fill slender tanks exhibit slightly longer impulsive periods compared to fully-filled tanks with identical fill-height to radius ratios. Furthermore, the fixed roof mass of a low-fill tank (if available) can have a more substantial contribution to base shear and moment than the fully-filled counterpart (which has the same fill-height to radius ratio). As a result, while lowering fill levels effectively reduces overall seismic loads, current API 650 equations can underestimate the base moment for low-fill tanks by about 27% for the case study tank. These findings emphasize the need to re-evaluate existing mechanical analogs to accurately capture structural risk and inform fragility curve development for low-fill slender tanks.The presentation was given at the 13th National Conference on Earthquake Engineering (13NCEE), July 13-17, 2026, in Portland, Oregon.

  • Open Access

    Interpretable Deep Reinforcement Learning for Element-level Bridge Life-cycle Optimization

    by David Yang, Seyyed Amirhossein Moayyedi

    The new Specifications for the National Bridge Inventory (SNBI), in effect from 2022, emphasize the use of element-level condition states (CS) for risk-based bridge management. Instead of a general component rating, element-level condition data use an array of relative CS quantities (i.e., CS proportions) to represent the condition of a bridge. Although this greatly increases the granularity of bridge condition data, it introduces challenges to set up optimal life-cycle policies due to the expanded state space from one single categorical integer to four-dimensional probability arrays. This study proposes a new interpretable reinforcement learning (RL) approach to seek optimal life-cycle policies based on element-level state representations. Compared to existing RL methods, the proposed algorithm yields life-cycle policies in the form of oblique decision trees with reasonable amounts of nodes and depth, making them directly understandable and auditable by humans and easily implementable into current bridge management systems. To achieve near-optimal policies, the proposed approach introduces three major improvements to existing RL methods: (a) the use of differentiable soft tree models as actor function approximators, (b) a temperature annealing process during training, and (c) regularization paired with pruning rules to limit policy complexity. Collectively, these improvements can yield interpretable life-cycle policies in the form of deterministic oblique decision trees. The benefits and trade-offs from these techniques are demonstrated in both supervised and reinforcement learning settings. The resulting framework is illustrated in a life-cycle optimization problem for steel girder bridges. The presentation was given during the ASCE Engineering Mechanics Institute Conference (EMI 2026), June 2-5, 2026, at the University of Colorado Boulder, Boulder, Colorado.

  • Open Access

    Project Prioritization for Near-optimal Functionality Risk Reduction in Bridge Networks

    by David Yang, Seyyed Amirhossein Moayyedi

    Bridge retrofit prioritization is commonly guided by structural vulnerability, traffic conditions, or indirect consequences following a single bridge failure. However, these metrics often fail to identify retrofit projects that maximally reduce system-level functionality risk, because they do not account for the consequences of joint failures among multiple bridges. This presentation develops a mathematically rigorous, gradient-based approach to bridge retrofit prioritization for achieving a near-optimal reduction in functionality risk. This risk is formulated as the expected increase in total travel time given probabilistic bridge survival or failure under external stressors such as earthquakes. By reinterpreting risk as the evidence term in an auxiliary Bayesian updating problem, the marginal posterior failure probabilities are leveraged to construct an asset importance factor. This factor is shown to be proportional to the gradient of system-level functionality risk relative to the failure probability of an asset. Using this connection between the proposed importance factor and the risk gradient, risk minimization under budgetary constraints is approximated as a classical knapsack problem. Accordingly, a near-optimal set of retrofit projects can be selected using simple heuristics based on benefit-to-cost ratios, with benefit defined using the proposed importance factor. The new approach, as well as the associated novel importance factor, is validated on the Sioux Falls bridge network against ground-truth retrofit selections for risk minimization and those prioritized using several existing decision-making analytics. Results demonstrate that project prioritization based on the proposed importance factor consistently outperforms existing analytics and closely matches the exact optimal solutions across varying budget levels and retrofit effectiveness. The presentation was given during the ASCE Engineering Mechanics Institute Conference (EMI 2026), June 2-5, 2026, at the University of Colorado Boulder, Boulder, Colorado.

  • Proceedings of the 33rd United States – Japan Bridge Engineering Workshop

    by David Yang

    This report summarizes the 33rd United States–Japan Bridge Engineering Workshop, an event that convenes bridge engineers from both countries. The workshop serves as a platform to exchange innovative ideas and technologies, as well as to share crucial knowledge and lessons learned, all with the aim of advancing bridge engineering. The 33rd workshop specifically addressed transportation asset management and seismic retrofitting, two subjects of increasing importance to both the United States and Japan. The report details the workshop's discussions on topics relevant to bridge engineers.

  • Framework and Methodology for Risk-Based Bridge and Tunnel Asset Management: Risk-Based Asset Ranking and Corridor Prioritization

    by David Yang, Arash Khosravifar, Diane Moug, Avinash Unnikrishnan

    This report presents the results of Phase II of the project, "Framework and Methodology for Risk-based Bridge and Tunnel Asset Management". The research was carried out at Portland State University in collaboration with engineers and officials at the Oregon Department of Transportation (ODOT) and Federal Highway Administration (FHWA). Using the framework and methodology developed in Phase I of the project, the primary goal of Phase II is to showcase the practical application in risk-based asset management. In particular, the report includes the following two case studies: Case Study I — Weighted hazard scenarios for seismic risk assessment of Oregon Highway Bridges, and Case Study II — Accessibility risk assessment and corridor prioritization for Portland bridge network under a scenario Cascadia Subduction Zone (CSZ) earthquake. Each case study focuses on a specific method proposed in the Phase I of the project.

  • Open Access

    Risk-Based Methodology for Structural Evaluation of Bridge-Sized Culverts

    by Portland State University, David Yang, Kevin White, E.L. Robinson Engineering of Ohio, Timothy Wood

    This report presents the results of the project sponsored by the Federal Highway Administration (FHWA), “Risk Based Methodology for Structural Evaluation of Bridge-Sized Culverts”. The goal of this project was to develop general methodology to (a) quantify uncertainty, especially live load uncertainty, unique to bridge-sized RC box culverts and (b) analyze and calibrate reliability of culverts rated under different rating loads. Over 344 combinations of culvert designs and backfill depths were analyzed based on the AASHTO Manual for Bridge Evaluation as well as the three-dimensional finite element models (FEMs) of the soil-culvert systems. For each combination, a wide range of vehicle loads was examined including axle groups detected in weight-in-motion (WIM) data, the HL93 design loads, the AASHTO legal loads, and the FAST Act emergency vehicles as surrogate loads. The methodology laid out in this project was illustrated with analyses on the top slab of culverts, primarily focusing on the positive bending moment at midspan.

  • Open Access

    Performance-Based Risk Assessment for Large-Scale Transportation Networks Using the Transitional Markov Chain Monte Carlo Method

    by Anteneh Z. Deriba, David Y. Yang

    Accurately assessing failure risk due to asset deterioration and/or extreme events is essential for efficient transportation asset management. Traditional risk assessment is conducted for individual assets by either focusing on the economic risk to asset owners or relying on empirical proxies of systemwide consequences. Risk assessment directly based on system performance (e.g., network capacity) is largely limited due to (1) an exponentially increasing number of system states for accurate performance evaluation, (2) potential contribution of system states with low likelihood yet high consequences (i.e., "gray swan" events) to system state, and (3) lack of actionable information for asset management from risk assessment results. To address these challenges, this paper introduces a novel approach to performance-based risk assessment for large-scale transportation networks. The new approach is underpinned by the Transitional Markov Chain Monte Carlo (TMCMC) method, a sequential sampling technique originally developed for Bayesian updating. The risk assessment problem is reformulated such that (1) the system risk becomes the normalizing term (i.e., evidence) of a high-dimensional posterior distribution, and (2) the final posterior samples from TMCMC yield risk-based importance measures for different assets. Two types of analytical examples are developed to demonstrate the effectiveness and efficiency of the proposed approach as the number of assets increases and the influence of gray swan events grows. The new approach is further applied in a case study on the Oregon highway network, serving as a real-world example of large-scale transportation networks.

  • Open Access

    Objective risk assessment for bridge management

    by Seyyed Amirhossein Moayyedi, David Y. Yang

    Bridges are subjected to various natural and/or human-induced hazards with considerable uncertainties arising from hazard characteristics, structural vulnerabilities, and damage consequences. Quantifying the associated risk requires the evaluation of a risk integral. However, its computation is incompatible with the prevailing risk estimation methods currently used in many bridge management systems (BMSs). Inaccurate risk assessment may result in the misallocation of often limited resources for risk mitigation. This paper presents a novel tabulation approach for accurate risk assessment that is also compatible with common BMS implementation. The proposed approach is built on the rigorous formulation of risk integrals. Nonetheless, it uses Gaussian quadrature to derive a series of weighted hazard scenarios that can be tabulated in BMSs to accurately tally the total risk. As a result, the proposed approach fills in the gap between accurate risk assessment with risk integrals and practical implementation in bridge management. Results from this study show that with the same number of hazard scenarios, the novel approach can significantly improve the accuracy of risk assessment. The potential of this approach in a multi-hazard setting is also discussed.