Sang-Hun Jeong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sang-Hun Jeong has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
Byung-Teak Lee
19 shared publicationsNam-Ho Lee
8 shared publicationsJae-Keun Kim
Chonnam National University
7 shared publicationsIl-Soo Kim
6 shared publicationsSeong-Ik Cho
6 shared publicationsHoang Ba Cuong
5 shared publications
Latest Publications
- 15 September 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 32 (49) , 495602
Efficient and additive-free synthesis of morphology variant iron oxyhydroxide nanostructures for phosphate adsorption application
Iron oxyhydroxide (FeOOH) nanostructures of different shapes were successfully synthesized on flexible textile cloth of polyester using a novel and simple technique based on hydrolysis method. The technique used herein is newly designed specifically to improve the efficiency in terms of energy, simplicity and cost involved in large scale synthesis of nanostructured thin films. Additionally, the morphology of nano-sized iron oxyhydroxide could be tuned into different shapes through variation in the type of precursors used for synthesis. The uniformity and adhesion of the depositions were also found to be excellent as examined by qualitative techniques. The as-deposited samples exhibited monoclinic and orthorhombic structures of FeOOH. A significant variation in the shape of as-deposited FeOOH nanostructures with change in precursor was observed through morphological studies, which displayed lance-shaped, rounded clusters and rod-like growth features in different cases. The nanocrystalline FeOOH can be directly applied to attract and trap phosphate from water reservoirs, thus contributing to environmental solutions. The proposed technique can also be utilized to deposit larger areas, which could be suitable for practical applications.
- 15 September 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 32 (49) , 495602
Efficient and additive-free synthesis of morphology variant iron oxyhydroxide nanostructures for phosphate adsorption application
Iron oxyhydroxide (FeOOH) nanostructures of different shapes were successfully synthesized on flexible textile cloth of polyester using a novel and simple technique based on hydrolysis method. The technique used herein is newly designed specifically to improve the efficiency in terms of energy, simplicity and cost involved in large scale synthesis of nanostructured thin films. Additionally, the morphology of nano-sized iron oxyhydroxide could be tuned into different shapes through variation in the type of precursors used for synthesis. The uniformity and adhesion of the depositions were also found to be excellent as examined by qualitative techniques. The as-deposited samples exhibited monoclinic and orthorhombic structures of FeOOH. A significant variation in the shape of as-deposited FeOOH nanostructures with change in precursor was observed through morphological studies, which displayed lance-shaped, rounded clusters and rod-like growth features in different cases. The nanocrystalline FeOOH can be directly applied to attract and trap phosphate from water reservoirs, thus contributing to environmental solutions. The proposed technique can also be utilized to deposit larger areas, which could be suitable for practical applications.
- Open Access
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 7 (2) , 470-476
The surface hybridization of diamond with vertical graphene: a new route to diamond electronics
Herein a method is proposed for engineering the electronic properties (including the band structure) of diamond via surface hybridization with graphene. Graphene layers (5–50 nm in thickness) were grown vertically onto a polished 〈110〉 textured polycrystalline diamond plate (1 × 1 cm2) (vGr-diamond) at ∼1300 °C via hydrogen plasma etching in a chemical vapor deposition (CVD) chamber. Due to the crystallographic relationship, the graphene layers embed at an angle of 30° to the diamond surface comprising the (110) planes. The epitaxial relationship is demonstrated via low angle X-ray diffraction (XRD), the XRD rocking curve, Raman and scanning electron microscopy. With hybridization, the diamond sample reveals a strong photoluminescent (PL) signal at ∼2.78 eV (∼450 nm). The peak was assigned to the ‘interface defects’ of the vGr-diamond hybrid structure, which are a type of ‘surface defect’ of the CVD diamond that generates a peak at ∼2.69 eV. The blue shift (∼90 meV) of the interface defects is due to the compressive strain of ∼3% applied to the interface atoms. Simulations indicate that the hybrid structures possess a finite band gap of 1.85–0.25 eV, which decreases upon increasing the thickness of the graphene layers to ∼1.4 nm. The appearance of a small band gap was attributed to the compressive strain. These findings may provide a route for diamond to become a platform for next generation and extreme electronic devices.
- 14 November 2019
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 7 (2) , 470-476
Open AccessThe surface hybridization of diamond with vertical graphene: a new route to diamond electronics
Herein a method is proposed for engineering the electronic properties (including the band structure) of diamond via surface hybridization with graphene. Graphene layers (5–50 nm in thickness) were grown vertically onto a polished 〈110〉 textured polycrystalline diamond plate (1 × 1 cm2) (vGr-diamond) at ∼1300 °C via hydrogen plasma etching in a chemical vapor deposition (CVD) chamber. Due to the crystallographic relationship, the graphene layers embed at an angle of 30° to the diamond surface comprising the (110) planes. The epitaxial relationship is demonstrated via low angle X-ray diffraction (XRD), the XRD rocking curve, Raman and scanning electron microscopy. With hybridization, the diamond sample reveals a strong photoluminescent (PL) signal at ∼2.78 eV (∼450 nm). The peak was assigned to the ‘interface defects’ of the vGr-diamond hybrid structure, which are a type of ‘surface defect’ of the CVD diamond that generates a peak at ∼2.69 eV. The blue shift (∼90 meV) of the interface defects is due to the compressive strain of ∼3% applied to the interface atoms. Simulations indicate that the hybrid structures possess a finite band gap of 1.85–0.25 eV, which decreases upon increasing the thickness of the graphene layers to ∼1.4 nm. The appearance of a small band gap was attributed to the compressive strain. These findings may provide a route for diamond to become a platform for next generation and extreme electronic devices.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Effect of growth variables on properties of gallium oxide thin films grown by sputtering
The development of high-quality beta gallium oxide thin film is essential for successful application. We investigated effects of growth variables on gallium oxide thin films by RF magnetron sputtering. The results showed that high quality beta gallium oxide thin films are formed at high temperature but the quality degrades at the low temperature. Effects of growth variables such as growth temperature, power and gas composition will be discussed in detail during the presentation.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Effect of growth variables on properties of gallium oxide thin films grown by sputtering
The development of high-quality beta gallium oxide thin film is essential for successful application. We investigated effects of growth variables on gallium oxide thin films by RF magnetron sputtering. The results showed that high quality beta gallium oxide thin films are formed at high temperature but the quality degrades at the low temperature. Effects of growth variables such as growth temperature, power and gas composition will be discussed in detail during the presentation.
- 1 May 2017
- Published by Elsevier in Acta Materialia
- Vol. 130, 47-55
Realization of highly conductive Ga-doped ZnO film with abnormally wide band-gap using magnetron sputtering by simply lowering working pressure
- 1 May 2017
- Published by Elsevier in Acta Materialia
- Vol. 130, 47-55
Realization of highly conductive Ga-doped ZnO film with abnormally wide band-gap using magnetron sputtering by simply lowering working pressure
- 1 March 2017
- Published by The Korean Institute of Electrical Engineers in The Transactions of The Korean Institute of Electrical Engineers
- Vol. 66 (3) , 540-544
Analysis of Radiation Effects in CMOS 0.18um Process Unit Devices
- 1 March 2017
- Published by The Korean Institute of Electrical Engineers in The Transactions of The Korean Institute of Electrical Engineers
- Vol. 66 (3) , 540-544
Analysis of Radiation Effects in CMOS 0.18um Process Unit Devices
- 31 January 2017
- Published by Korea Institute of Information and Communication Engineering in The Journal of the Korean Institute of Information and Communication Engineering
- Vol. 21 (1) , 223-228
Optimized Design and Manufacture of Wideband Pulsed Gamma-ray Sensors
Optimized Design and Manufacture of Wideband Pulsed Gamma-ray Sensors Pulse radiation;Sensor;Leakage Current;Dose-rate; In this paper, we are proposing an optimal design of wideband pulsed type gamma-ray sensors. These sensors were manufactured based on the design results and after word electrical properties were analyzed. The sensor input parameters were derived on the basis of pulsed gamma-ray spectrum and time-dependent energy rate, and the output current which were derived on the basis of the sensor sensitivity control circuit. Pulsed gamma-ray sensors were designed using the TCAD simulators. The design results show that the optimal Epi layer thickness is 45um with the applied voltage 3.3V and the diameter is 2.0mm. The doping concentrations are as follows : N-type is an Arsenic as $1{\times}10^{19}/cm^3$, P-type is a Boron as $1{\times}10^{19}/cm^3$ and Epi layer is Phosphorus as $3.4{\times}10^{12}/cm^3$. The fabricated sensor was a leakage current, 12pA at voltage -3.3V and fully depleted mode at voltage -5V. A test result of pulsed radiation shows that the sensor gives out the optimal photocurrent.- 31 January 2017
- Published by Korea Institute of Information and Communication Engineering in The Journal of the Korean Institute of Information and Communication Engineering
- Vol. 21 (1) , 223-228
Optimized Design and Manufacture of Wideband Pulsed Gamma-ray Sensors
Optimized Design and Manufacture of Wideband Pulsed Gamma-ray Sensors Pulse radiation;Sensor;Leakage Current;Dose-rate; In this paper, we are proposing an optimal design of wideband pulsed type gamma-ray sensors. These sensors were manufactured based on the design results and after word electrical properties were analyzed. The sensor input parameters were derived on the basis of pulsed gamma-ray spectrum and time-dependent energy rate, and the output current which were derived on the basis of the sensor sensitivity control circuit. Pulsed gamma-ray sensors were designed using the TCAD simulators. The design results show that the optimal Epi layer thickness is 45um with the applied voltage 3.3V and the diameter is 2.0mm. The doping concentrations are as follows : N-type is an Arsenic as $1{\times}10^{19}/cm^3$, P-type is a Boron as $1{\times}10^{19}/cm^3$ and Epi layer is Phosphorus as $3.4{\times}10^{12}/cm^3$. The fabricated sensor was a leakage current, 12pA at voltage -3.3V and fully depleted mode at voltage -5V. A test result of pulsed radiation shows that the sensor gives out the optimal photocurrent.- 31 October 2016
- Published by Korea Institute of Information and Communication Engineering (Nurimedia) in The Journal of the Korean Institute of Information and Communication Engineering
- Vol. 20 (10) , 1927-1934
Design of a radiation-tolerant I-gate n-MOSFET structure and analysis of its characteristic
- 31 October 2016
- Published by Korea Institute of Information and Communication Engineering (Nurimedia) in The Journal of the Korean Institute of Information and Communication Engineering
- Vol. 20 (10) , 1927-1934
Design of a radiation-tolerant I-gate n-MOSFET structure and analysis of its characteristic