YLYunpeng Li

Yunpeng Li

*This is an algorithmically generated author record based on publicly available information.

Yunpeng Li has a total of 54 co-authors. Here are the top co-authors by number of shared publications:

  • Aimin Song

    Institute of Nanoscience and Applications, Southern University of Science and Technology, Shenzhen, China

    10 shared publications
  • Jiawei Zhang

    Shandong Technology Center of Nanodevices and Integration, School of Integrated Circuits, Shandong University, Jinan, China

    6 shared publications
  • Qian Xin

    School of Integrated Circuits, Shandong University, Jinan, China

    6 shared publications
  • Li Zhou

    Centre of Nanoelectronics, State Key Laboratory of Crystal Materials, and School of Microelectronics, Shandong University, Jinan 250100, China

    5 shared publications
  • Jin Yang

    Centre of Nanoelectronics, State Key Laboratory of Crystal Materials, and School of Microelectronics, Shandong University, Jinan 250100, China and Suzhou Institute of Shandong University, Suzhou 215123, China

    4 shared publications
  • Qian Xin

    State Key Laboratory of Crystal Materials, Centre of Nanoelectronics, and School of Microelectronics, Shandong University, Jinan, China

    4 shared publications

Latest Publications

  • Open Access

    Linearization of the tunneling magnetoresistance sensors through a three-step annealing process

    by Yuzu Sun, Qingtao Xia, Dandan Zhang, Qianqian Mou, Yunpeng Li, Libo Xie, Shaojie Guang, Zhiqiang Cao, Dapeng Zhu, Weisheng Zhao

    For tunneling magnetoresistance (TMR) sensors using magnetic tunnel junctions (MTJ), the sensor output linearization is of great importance for practical applications. The current study employs a three-step magnetic annealing procedure for linearizing the double-pinned MTJs, setting the magnetization of the free layer to be orthogonal to that of the reference layer. Compared to the traditional two-step annealing procedure, the three-step annealing procedure benefits from a lower annealing temperature and excellent linearity performance. Utilizing the three-step annealing procedure, the sensitivity and the detectivity of 1.57 mV/V/Oe and 29.3 nT Hz0.5 @ 10 Hz, respectively, was achieved in a full Wheatstone bridge TMR sensor. Our results reveal a new pathway for linearization of the TMR sensors through three-step annealing process.


  • A Design Scheme for Reducing Power Consumption of Domestic Intelligent Electricity Meter

    by Xueyu Han, Lvchao Huang, Yonggui Wang, Jinguo Fang, Yunpeng Li

    In order to achieve the low power requirements of the new smart electricity meter, reduce the terminal power consumption and prolong the battery power service time, this paper designed and implemented a smart electricity meter to reduce the power consumption. The scheme is designed to reduce static power consumption and dynamic power consumption. Static power consumption reduction is mainly due to the consideration of device selection, while dynamic power consumption is mainly achieved by setting low power mode and switching between different working modes.

  • Research And Implementation of High Precision Full Range Analog Acquisition System Based on Zero Flux Current Transformer

    by Yunpeng Li, Yonggui Wang, Lvchao Huang, Jinguo Fang, Xueyu Han, Yuan Gao, Siyang Deng

    The new generation substation has a special demand for high-precision measurement and high-performance power quality of fiscal metering units, compared with the traditional fiscal metering units, the detection current is smaller and the dynamic measurement range is wider. In order to solve the above problems, a scheme of using zero flux current transformer to collect current to ensure the effective value and phase accuracy of small current, using high-precision ADC chip in hardware, multistage current acquisition and multi-point calibration in software is proposed, complete large dynamic range current acquisition, to design method of substation fiscal metering units to realize the functions of electricity metering and power quality. Through the data acquisition of two hardware design schemes, the scheme of zero flux current transformer + multi-stage acquisition is superior to the scheme of traditional current transformer + single-stage acquisition, meetting the technology needs of a new generation of substation fiscal metering units.

  • Open Access

    Topology identification method of distribution network based on branch active power

    by Biqi Liu, Danni Wang, Yunpeng Li, Lin Qiao, Shuo Chen

    Because of low measurement redundancy and frequent switch changes, it is difficult to identify the correct topology structure. In this paper, a topology recognition method of distribution network based on branch active power is proposed. Firstly, branch active power residual algorithm is used to identify the topological structure. The topology obtained by this method has the highest matching degree with the real-time measured data. Then genetic algorithm is used to optimize the inverse recognition of power grid topology. The numerical example shows that the method is reasonable, effective, rapid and simple. It also has good adaptability with a large number of measurement errors.


  • All-Oxide-Semiconductor-Based Thin-Film Complementary Static Random Access Memory

    by Jin Yang, Yuzhuo Yuan, Yunpeng Li, Lulu Du, Yiming Wang, Zhenjia Hu, Qingpu Wang, Li Zhou, Qian Xin, Aimin Song

    Static random access memory (SRAM) is essential for cache memory. Although oxide semiconductors are ideal candidate materials for next generation flexible electronics, complementary SRAM based on oxide semiconductors has not yet been demonstrated. Here, we reported an SRAM with a traditional 6-transistor structure based on n-type indium gallium zinc oxide and p-type tin monoxide. A cell area of only 130 × 160 μm2 has been achieved, and is the smallest among the reported values of SRAMs based on flexible semiconductors. Both traditional static voltage characteristic and N-curve methods are applied to analyse the noise margin level of the cell. The former method demonstrates a high noise margin of 1.43 V in read at VDD of 8 V, and the latter demonstrates static current and voltage noise margins of 13 μA and 2.05 V, respectively. In addition, the SRAM cell shows rather short writing time of 121 and 82 μs for high and low writing states, respectively. This high performance complementary SRAM based on all oxide semiconductors indicates its high application potential in large-scale flexible electronics for data storage and processing.


  • Oxide-Based Complementary Inverters With High Gain and Nanowatt Power Consumption

    by Yuzhuo Yuan, Jin Yang, Zhenjia Hu, Yunpeng Li, Lulu Du, Yiming Wang, Li Zhou, Qingpu Wang, Aimin Song, Qian Xin

    Oxide semiconductors are ideal candidates for flexible and transparent electronics. Here, we report complementary inverters based on p-type tin monoxide and n-type indium-gallium-zinc-oxide thin-film transistors. The inverters have a gain of 63 at a supply voltage, V DD , of 1.5 V with a maximum static power consumption of 15.6 nW, and a gain of 226 at V DD of 3.0 V with a maximum power consumption of 241.2 nW. A five-stage ring oscillator (RO) based on the complementary inverters is able to operate at 1.04 kHz with full amplitude oscillations at V DD of 1.5 V. All the inverters and RO are fabricated on silicon wafers but at a maximum processing temperature of 225 °C, so that the results are relevant to possible flexible applications. The extremely low power consumption of nanowatt, high gain, kHz operation, and possible flexibility of the fabricated complementary components is well suited to meet the requirements of wearable electronics, Internet of Things technology, and so on.


  • High-Performance Flexible Schottky Diodes Based on Sputtered InGaZnO

    by Lulu Du, Jiawei Zhang, Yunpeng Li, Mingsheng Xu, Qingpu Wang, Aimin Song, Qian Xin

    High-performance flexible InGaZnO-based Schottky diodes are fabricated on polyethylene terephthalate (PET) and polyimide (PI) substrates at room temperature without any thermal treatment. The diode performance improves significantly by either oxygen plasma or UV-ozone treatment on Pd anode. X-ray photoelectron spectroscopy indicates that both treatments lead to Pd surface oxidation. The oxygen plasma treatment results in more complete oxidation, and thus ensures better oxygen stoichiometry at the Schottky interface and a higher anode work function. This leads to high performance with on/off ratios of 7.3 × 10 6 and 2.6 × 10 4 , barrier heights of 0.79 and 0.76 eV, and ideality factors of 1.22 and 1.19 on PET and PI, respectively. Interestingly, these flexible diodes show improved performance after storing in ambient air for two years, and fittings on the reverse currents indicate an improved barrier uniformity. The flexible diode on PET after a two-year storage achieves a high on/off ratio of 2 107, a large barrier height of 0.80 eV, a close to unity ideality factor of 1.09, a high breakdown voltage of -7.5 V, and robust performance upon outward or inward bending, which is, to the best of our knowledge, the highest performance in reported flexible diodes to date.


  • Half-volt operation of IGZO thin-film transistors enabled by ultrathin HfO2 gate dielectric

    by Pengfei Ma, Jiamin Sun, Guangda Liang, Yunpeng Li, Qian Xin, Yuxiang Li, Aimin Song

    Amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) enabled by an ultrathin, 5 nm, HfO2 film grown by atomic-layer deposition were fabricated. An ultra-low operation voltage of 1 V was achieved by a very high gate capacitance of 1300 nF/cm2. The HfO2 layer showed excellent surface morphology with a low root-mean-square roughness of 0.20 nm and reliable dielectric properties, such as low leakage current and high breakdown electric field. As such, the a-IGZO TFTs exhibit desirable properties such as low power devices, including a small subthreshold swing of 75 mV/decade, a low threshold voltage of 0.3 V, and a high on/off current ratio of 8 × 106. Furthermore, even under an ultralow operation voltage of 0.5 V, the on/off ratio was also up to 1 × 106. The electron transport through the HfO2 layer has also been analyzed, indicating the Poole-Frenkel emission and Fowler-Nordheim tunneling mechanisms in different voltage ranges.


  • Open Access

    Ambipolar SnOx thin-film transistors achieved at high sputtering power

    by Yunpeng Li, Jia Yang, Yunxiu Qu, Jiawei Zhang, Li Zhou, Zaixing Yang, Zhaojun Lin, Qingpu Wang, Aimin Song, Qian Xin

    SnO is the only oxide semiconductor to date that has exhibited ambipolar behavior in thin-film transistors (TFTs). In this work, ambipolar behavior was observed in SnOx TFTs fabricated at a high sputtering power of 200 W and post-annealed at 150–250 °C in ambient air. X-ray-diffraction patterns showed polycrystallisation of SnO and Sn in the annealed SnOx films. Scanning-electron-microscopy images revealed that microgrooves appeared after the films were annealed. Clusters subsequently segregated along the microgrooves, and our experiments suggest that they were most likely Sn clusters. Atomic force microscopy images indicate an abrupt increase in film roughness due to the cluster segregations. An important implication of this work is that excess Sn in the film, which has generally been thought to be detrimental to the film quality, may promote the ambipolar conduction when it is segregated from the film to enhance the stoichiometric balance.