Jun Zhong

The current reliance on manual rescue is inefficient, and lightweight, highly flexible, and intelligent robots need to be investigated. Global seismic disasters occur often, and rescue jobs are defined by tight timetables and high functional and intellectual requirements. This study develops a hydraulically powered redundant robotic arm with seven degrees of freedom. To determine the force situation of the robotic arm in various positions, the common digging and handling conditions of the robotic arm are dynamically simulated in ADAMS. A finite element analysis is then performed for the dangerous force situation to confirm the structural strength of the robotic arm. The hydraulic manipulator prototype is manufactured, and stress–strain experiments are conducted on the robotic arm to verify the finite element simulation’s reliability.

One of the primary duties in the regular maintenance of electrical distribution networks is the cable stripping operation. In this paper, a unique robot is proposed to overcome drawbacks of the conventional manual operation of cable stripping, such as poor efficiency, low safety, and high labor intensity. This innovative cable-stripping robot is made up of a rotating mechanism, a cable gripping component, and a cutter feeding mechanism that can be adjusted depending on the working environment and workload. The robot’s motors, sensors, main control chip, and wireless communication modules are all carefully selected. A carefully designed cascade controller is created for the robot in an effort to lessen damage to the aluminum core. While the outside location loop uses the PID algorithm, the inner speed control loop uses fuzzy PID. The robot can successfully accomplish cable stripping work and demonstrates its potential to reduce labor intensity. Cable stripping experiments are conducted to validate the effect of the robot and its controller.

A 10 kV distribution network is critical for ensuring power supply to residents and factories. The number of power maintenance operations is rapidly increasing, and aerial cable stripping is a significant branch of these routine maintenances. High-voltage cable stripping, on the other hand, is mostly done manually, which is inefficient and poses serious security risks. As a result, this paper proposes an automatic wire stripping robot for use in a 10 kV power grid. The mechanical structure of the stripping robot is designed for installation on the insulating rod based on the working environment of 10 kV overhead cables. The robot was subjected to electromagnetic field simulation, modal analysis, and rigid-flexible coupling analysis. Finally, the robot prototype is built, and the PID controller is designed. Stripping tests are performed on a cable with a cross-sectional area of 95, 120, 150, 240, and 300 mm², and the results are satisfactory.

A 10 kV distribution network is a crucial piece of infrastructure to guarantee enterprises’ and households’ access to electricity. Stripping cables is one of many power grid maintenance procedures that are now quickly expanding. However, typical cable-stripping procedures are manual and harmful to workers. Although numerous automated solutions for grid maintenance have been created, none of them focus on cable stripping, and most of them have large dimensions to guarantee multi-functions. In this paper, a new cable-stripping robot for the 10 kV power system is introduced. The design of a live working cable-stripping robot that is appropriate for installing insulating rods is introduced, taking into account the working environment of 10 kV overhead lines and the structural characteristics of overhead cables. The robot is managed by an auxiliary remote control device. A cascade PID control technology based on the back propagation neural network (BPNN) method was developed, as the stripper robot’s whole system is nonlinear and the traditional PID controller lacked robustness and adaptability in complex circumstances. To validate the structural feasibility of the cable-stripping robot, as well as the working stability and adaptability of the BPNN–PID controller, a 95 mm² cable-stripping experiment are carried out. A comparison of the BPNN–PID controller with the traditional PID method revealed that the BPNN–PID controller has a greater capacity for speed tracking and system stability. This robot demonstrated its ability to replace manual stripping procedures and will be used for practical routine power maintenance.

Pneumatic muscle actuators (PMAs) own compliant characteristics and are suitable for use in rehabilitation equipment. This paper introduces a rehabilitation robot driven by PMAs devised in the Rehabilitation and Medical Robot Laboratory. Considering high nonlinearities inside PMAs, a single neuron tuned PID controller is carefully designed. Experimental setup is built up and trials are performed. Results demonstrate the proposed advanced PID algorithm can achieve better capacity in position tracking than the conventional PID controller.