Massimo Petracca
Massimo Petracca has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Guido Camata
University “G. D’Annunzio” of Chieti-Pescara
7 shared publications - Enrico Spacone
University “G. D’Annunzio” of Chieti-Pescara
5 shared publications - Luca Pelà
Department of Civil and Environmental Engineering, Universitat Politècnica de Catalunya (UPC-BarcelonaTech), Barcelona, Spain
2 shared publications - Alessandra Marini
Department of Engineering and Applied Sciences, University of Bergamo, Dalmine, Italy
1 shared publication - Alessia Amelio
HPC Laboratory, Department of Engineering and Geology, University “G. d’Annunzio” Chieti-Pescara, Pescara, Italy
1 shared publication - Andrea Belleri
University of Bergamo
1 shared publication
Latest Publications
- Open Access
- 17 November 2026
- Published by Springer Nature
- p. 805-812
Preliminary Insights from Full-Scale Tests on the In-Plane Capacity of Beam-and-Block Floors
- 17 November 2026
- Published by Springer Nature
- p. 805-812
Open AccessPreliminary Insights from Full-Scale Tests on the In-Plane Capacity of Beam-and-Block Floors
- Open Access
- 1 July 2026
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 209
An efficient finite element framework for nonlinear seismic soil-foundation-structure interaction in shallow-founded squat masonry structures
- 1 July 2026
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 209
Open AccessAn efficient finite element framework for nonlinear seismic soil-foundation-structure interaction in shallow-founded squat masonry structures
- 1 October 2025
- Published by Springer Nature
- p. 311-321
Bayesian Model Updating of a Dam-Water-Foundation Rock System: A Case Study of Pine Flat Dam
- 1 October 2025
- Published by Springer Nature
- p. 311-321
Bayesian Model Updating of a Dam-Water-Foundation Rock System: A Case Study of Pine Flat Dam
- 28 May 2025
- Published by Springer Nature
- p. 38-51
Energy-Based Structural Damage Characterization from Shaking-Table Test
- 28 May 2025
- Published by Springer Nature
- p. 38-51
Energy-Based Structural Damage Characterization from Shaking-Table Test
- Open Access
- 17 May 2023
- Published by MDPI AG in Big Data and Cognitive Computing
- Vol. 7 (2) , 99
Unsupervised Deep Learning for Structural Health Monitoring
In the last few decades, structural health monitoring has gained relevance in the context of civil engineering, and much effort has been made to automate the process of data acquisition and analysis through the use of data-driven methods. Currently, the main issues arising in automated monitoring processing regard the establishment of a robust approach that covers all intermediate steps from data acquisition to output production and interpretation. To overcome this limitation, we introduce a dedicated artificial-intelligence-based monitoring approach for the assessment of the health conditions of structures in near-real time. The proposed approach is based on the construction of an unsupervised deep learning algorithm, with the aim of establishing a reliable method of anomaly detection for data acquired from sensors positioned on buildings. After preprocessing, the data are fed into various types of artificial neural network autoencoders, which are trained to produce outputs as close as possible to the inputs. We tested the proposed approach on data generated from an OpenSees numerical model of a railway bridge and data acquired from physical sensors positioned on the Historical Tower of Ravenna (Italy). The results show that the approach actually flags the data produced when damage scenarios are activated in the OpenSees model as coming from a damaged structure. The proposed method is also able to reliably detect anomalous structural behaviors of the tower, preventing critical scenarios. Compared to other state-of-the-art methods for anomaly detection, the proposed approach shows very promising results.
- 17 May 2023
- Published by MDPI AG in Big Data and Cognitive Computing
- Vol. 7 (2) , 99
Open AccessUnsupervised Deep Learning for Structural Health Monitoring
In the last few decades, structural health monitoring has gained relevance in the context of civil engineering, and much effort has been made to automate the process of data acquisition and analysis through the use of data-driven methods. Currently, the main issues arising in automated monitoring processing regard the establishment of a robust approach that covers all intermediate steps from data acquisition to output production and interpretation. To overcome this limitation, we introduce a dedicated artificial-intelligence-based monitoring approach for the assessment of the health conditions of structures in near-real time. The proposed approach is based on the construction of an unsupervised deep learning algorithm, with the aim of establishing a reliable method of anomaly detection for data acquired from sensors positioned on buildings. After preprocessing, the data are fed into various types of artificial neural network autoencoders, which are trained to produce outputs as close as possible to the inputs. We tested the proposed approach on data generated from an OpenSees numerical model of a railway bridge and data acquired from physical sensors positioned on the Historical Tower of Ravenna (Italy). The results show that the approach actually flags the data produced when damage scenarios are activated in the OpenSees model as coming from a damaged structure. The proposed method is also able to reliably detect anomalous structural behaviors of the tower, preventing critical scenarios. Compared to other state-of-the-art methods for anomaly detection, the proposed approach shows very promising results.
- 18 September 2022
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 17 (1) , 134-146
Efficient Constitutive Model for Continuous Micro-Modeling of Masonry Structures
Masonry is a composite material often modeled as an equivalent homogenous material. However, the complexity of its micro-structure leads to complex mechanical responses, which are almost impossible to capture accurately with homogenous constitutive models. Micro-modeling can be used in these scenarios, allowing for the explicit modeling of microstructural components, leading to an accurate capturing of their interaction. Its main drawback is the computational cost, which often makes this approach suitable only for the simulation of small specimens. This is especially true due to strain-softening leading to severe instabilities and non-convergence of the solution. The objective of this work is to propose a simple yet effective constitutive plastic-damage model for the microstructural components of masonry. It is based on a damage model previously developed by the authors. For a better representation of the cyclic response of masonry, plasticity is added using a simplified implementation that does not strictly follow the rules of standard elastoplasticity, allowing an explicit computation of the stress tensor from the strain tensor without the need for an iterative loop at the material level. To reduce the numerical issues related to strain-softening and thus improve the stability of the solution, an IM-PLEX integration algorithm is adopted.
- 18 September 2022
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 17 (1) , 134-146
Efficient Constitutive Model for Continuous Micro-Modeling of Masonry Structures
Masonry is a composite material often modeled as an equivalent homogenous material. However, the complexity of its micro-structure leads to complex mechanical responses, which are almost impossible to capture accurately with homogenous constitutive models. Micro-modeling can be used in these scenarios, allowing for the explicit modeling of microstructural components, leading to an accurate capturing of their interaction. Its main drawback is the computational cost, which often makes this approach suitable only for the simulation of small specimens. This is especially true due to strain-softening leading to severe instabilities and non-convergence of the solution. The objective of this work is to propose a simple yet effective constitutive plastic-damage model for the microstructural components of masonry. It is based on a damage model previously developed by the authors. For a better representation of the cyclic response of masonry, plasticity is added using a simplified implementation that does not strictly follow the rules of standard elastoplasticity, allowing an explicit computation of the stress tensor from the strain tensor without the need for an iterative loop at the material level. To reduce the numerical issues related to strain-softening and thus improve the stability of the solution, an IM-PLEX integration algorithm is adopted.
- Open Access
- 1 February 2022
- Published by Elsevier in Engineering Structures
- Vol. 253, 113755
Validation of non-linear equivalent-frame models for irregular masonry walls
- 1 February 2022
- Published by Elsevier in Engineering Structures
- Vol. 253, 113755
Open AccessValidation of non-linear equivalent-frame models for irregular masonry walls
- 1 December 2018
- Published by Elsevier in Composite Structures
- Vol. 206, 215-233
Adaptive and off-line techniques for non-linear multiscale analysis
- 1 December 2018
- Published by Elsevier in Composite Structures
- Vol. 206, 215-233
Adaptive and off-line techniques for non-linear multiscale analysis
- 8 December 2015
- Published by Springer Nature in Computational Mechanics
- Vol. 57 (2) , 257-276
Regularization of first order computational homogenization for multiscale analysis of masonry structures
- 8 December 2015
- Published by Springer Nature in Computational Mechanics
- Vol. 57 (2) , 257-276
Regularization of first order computational homogenization for multiscale analysis of masonry structures