Anael Preman Krelling
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anael Preman Krelling has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Elisangela Aparecida dos Santos de Almeida
UDESC, Brazil
9 shared publications - Júlio César Giubilei Milan
Universidade do Estado de Santa Catarina, Brasil
6 shared publications C.E. da Costa
5 shared publicationsCesar Edil da Costa
Universidade do Estado de Santa Catarina -Centro de Ciências Tecnológicas
5 shared publicationsJ.C.G. Milan
4 shared publicationsJulio Cesar Giubilei Milan
Universidade do Estado de Santa Catarina -Centro de Ciências Tecnológicas
4 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Functional Polypropylene Filaments for 3D Printing with Antiviral Properties Using a Glassy Ceramic ZnO–Al–Si–Na Additive
Additive manufacturing (AM) is a powerful platform for developing functional materials with broad applications across healthcare, consumer goods and industrial sectors. This study presents a pioneering polypropylene (PP) filament enhanced with a ZnO-based glassy ceramic additive (Si–Na–Al matrix), specifically designed for 3D printing. Beyond introducing antiviral functionality, the formulation overcomes a long-standing limitation in AM of polyolefins, significantly improving printability by reducing thermal shrinkage and enhancing interlayer adhesion. PP composites were fabricated with 2%, 6%, and 10% additive loadings and evaluated for morphological (SEM-BSE), chemical (FTIR, EDS) and biological performance. Antiviral assays, conducted according to ISO 21702 using exposure times of 15 and 120 minutes, demonstrated viral load reductions of up to 99.68% against betacoronavirus (MHV-3) and 96.84% against adenovirus at the highest additive concentration. In contrast, antibacterial tests based on ISO 22196 against E. coli and S. aureus showed no significant activity, likely due to limited additive release from the polymer matrix. These results establish a novel antiviral 3D-printable PP composite with improved manufacturing performance, offering a versatile solution for applications demanding structural integrity combined with bioactive antiviral surfaces.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Open AccessFunctional Polypropylene Filaments for 3D Printing with Antiviral Properties Using a Glassy Ceramic ZnO–Al–Si–Na Additive
Additive manufacturing (AM) is a powerful platform for developing functional materials with broad applications across healthcare, consumer goods and industrial sectors. This study presents a pioneering polypropylene (PP) filament enhanced with a ZnO-based glassy ceramic additive (Si–Na–Al matrix), specifically designed for 3D printing. Beyond introducing antiviral functionality, the formulation overcomes a long-standing limitation in AM of polyolefins, significantly improving printability by reducing thermal shrinkage and enhancing interlayer adhesion. PP composites were fabricated with 2%, 6%, and 10% additive loadings and evaluated for morphological (SEM-BSE), chemical (FTIR, EDS) and biological performance. Antiviral assays, conducted according to ISO 21702 using exposure times of 15 and 120 minutes, demonstrated viral load reductions of up to 99.68% against betacoronavirus (MHV-3) and 96.84% against adenovirus at the highest additive concentration. In contrast, antibacterial tests based on ISO 22196 against E. coli and S. aureus showed no significant activity, likely due to limited additive release from the polymer matrix. These results establish a novel antiviral 3D-printable PP composite with improved manufacturing performance, offering a versatile solution for applications demanding structural integrity combined with bioactive antiviral surfaces.
- 30 January 2025
- Published by Elsevier in Materials Letters
- Vol. 385
Influence of boriding on hardness and corrosion behavior in saline environment of Monel 400 nickel alloy
- 30 January 2025
- Published by Elsevier in Materials Letters
- Vol. 385
Influence of boriding on hardness and corrosion behavior in saline environment of Monel 400 nickel alloy
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Effect of Boriding on the Tribological Behavior of Monel 400 Alloy
The Monel 400 alloy, composed primarily of nickel and copper, offers excellent corrosion resistance but exhibits relatively low wear resistance, limiting its durability in demanding applications such as maritime industries, pumps, and valves. To address this, boriding thermochemical treatment was applied to enhance the surface hardness and wear resistance of the alloy. The process used a boriding powder containing 90% B4C and 10% KBF4 at 900 °C for 4 hours, avoiding silicon activators to prevent the formation of less hard nickel silicides. The resulting boride layer, predominantly Ni2B, Ni3B, and Ni4B3, was characterized using X-ray diffraction (XRD) and evaluated for adhesion via Rockwell C indentation (VDI 3198 standard). Wear performance was assessed through pin-on-disk tests on treated and untreated samples, analyzing wear rates, removed volume, and surface roughness using profilometry, confocal microscopy, and SEM. The borided layer achieved a hardness of up to 1600 HV0,01, demonstrating significantly improved wear resistance while maintaining strong adhesion to the substrate. This study highlights the potential of boriding as an effective treatment to extend the service life of Monel 400 in abrasive environments.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Open AccessEffect of Boriding on the Tribological Behavior of Monel 400 Alloy
The Monel 400 alloy, composed primarily of nickel and copper, offers excellent corrosion resistance but exhibits relatively low wear resistance, limiting its durability in demanding applications such as maritime industries, pumps, and valves. To address this, boriding thermochemical treatment was applied to enhance the surface hardness and wear resistance of the alloy. The process used a boriding powder containing 90% B4C and 10% KBF4 at 900 °C for 4 hours, avoiding silicon activators to prevent the formation of less hard nickel silicides. The resulting boride layer, predominantly Ni2B, Ni3B, and Ni4B3, was characterized using X-ray diffraction (XRD) and evaluated for adhesion via Rockwell C indentation (VDI 3198 standard). Wear performance was assessed through pin-on-disk tests on treated and untreated samples, analyzing wear rates, removed volume, and surface roughness using profilometry, confocal microscopy, and SEM. The borided layer achieved a hardness of up to 1600 HV0,01, demonstrating significantly improved wear resistance while maintaining strong adhesion to the substrate. This study highlights the potential of boriding as an effective treatment to extend the service life of Monel 400 in abrasive environments.
- Open Access
- 1 January 2025
- Published by Even3
- Vol. 3, 1
INFLUÊNCIA DA TEMPERATURA DE TRATAMENTO NA ADERÊNCIA DE CAMADAS BORETADAS EM AÇO AISI 8640
Anais do SIMPEX 2025 - Simpósio de Ensino, Pesquisa e Extensão (978-65-272-1620-9) - Influência Da Temperatura De Tratamento Na Aderência De Camadas Boretadas Em Aço Aisi 8640
- 1 January 2025
- Published by Even3
- Vol. 3, 1
Open AccessINFLUÊNCIA DA TEMPERATURA DE TRATAMENTO NA ADERÊNCIA DE CAMADAS BORETADAS EM AÇO AISI 8640
Anais do SIMPEX 2025 - Simpósio de Ensino, Pesquisa e Extensão (978-65-272-1620-9) - Influência Da Temperatura De Tratamento Na Aderência De Camadas Boretadas Em Aço Aisi 8640
- Open Access
- 1 January 2024
- Published by Even3
- Vol. 2, 1
ANÁLISE DA ADERÊNCIA DE CAMADAS DE BORETOS EM MONEL 400
Anais SIMPEX 2024 (978-65-272-0657-6) - Análise Da Aderência De Camadas De Boretos Em Monel 400
- 1 January 2024
- Published by Even3
- Vol. 2, 1
Open AccessANÁLISE DA ADERÊNCIA DE CAMADAS DE BORETOS EM MONEL 400
Anais SIMPEX 2024 (978-65-272-0657-6) - Análise Da Aderência De Camadas De Boretos Em Monel 400
- Open Access
- 24 November 2022
- Published by Elsevier in Results in Engineering
- Vol. 16
Microstrutural, mechanical characterizations and corrosion behaviour of borides layers on Inconel 718 superalloy
- 24 November 2022
- Published by Elsevier in Results in Engineering
- Vol. 16
Open AccessMicrostrutural, mechanical characterizations and corrosion behaviour of borides layers on Inconel 718 superalloy
- Open Access
- 1 February 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (2) , 026413
Microstructural and tribological characterization of niobium boride coating produced on AISI 1020 steel via multicomponent boriding
Niobium boride coating was produced on AISI 1020 steel by multicomponent boriding process. Boriding treatment at1000 °C for 4 h was followed by thermo-reactive diffusion technique at 1000 °C for 6 h under argon atmosphere. Microabrasive wear tests were carried out using SiC abrasive particles at slurry concentrations of 0.5 and 1.0 g cm−3. Normal loads of 0.49 and 0.98 N were used. NbB and Nb5B6 phases were identified by XRD analysis. The niobium boride coating thickness was 2.0 ± 0.5 μm and its hardness was 1360 ± 200 HK0.01. Owing to the presence of a porous region on the niobium/iron boride layers the abrasive wear resistance decreased comparing to the borided and untreated AISI 1020 steel. Rolling abrasion was the main wear mechanism observed.
- 1 February 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (2) , 026413
Open AccessMicrostructural and tribological characterization of niobium boride coating produced on AISI 1020 steel via multicomponent boriding
Niobium boride coating was produced on AISI 1020 steel by multicomponent boriding process. Boriding treatment at1000 °C for 4 h was followed by thermo-reactive diffusion technique at 1000 °C for 6 h under argon atmosphere. Microabrasive wear tests were carried out using SiC abrasive particles at slurry concentrations of 0.5 and 1.0 g cm−3. Normal loads of 0.49 and 0.98 N were used. NbB and Nb5B6 phases were identified by XRD analysis. The niobium boride coating thickness was 2.0 ± 0.5 μm and its hardness was 1360 ± 200 HK0.01. Owing to the presence of a porous region on the niobium/iron boride layers the abrasive wear resistance decreased comparing to the borided and untreated AISI 1020 steel. Rolling abrasion was the main wear mechanism observed.
- 10 January 2020
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 51 (3) , 1334-1344
Micro-abrasive Wear Behavior of Nitrided and Multilayer Coated High Vanadium Powder Metallurgy Alloy
- 10 January 2020
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 51 (3) , 1334-1344
Micro-abrasive Wear Behavior of Nitrided and Multilayer Coated High Vanadium Powder Metallurgy Alloy
- 14 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 106410
Microstructure and properties of borided Monel 400 alloy
- 14 August 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (10) , 106410
Microstructure and properties of borided Monel 400 alloy